TOA | VP-1060B | Specification Sheet | TOA VP-1060B Specification

TOA VP-1060B Specification
TOA V-1000 SERIES
POWER AMPLIFIERS
VP-1060B/VP-TI20B/VP-1240B/PA-3640VB
VP-1240B
VP-1060B
VP-1120B
PA-3640VB
DESCRIPTION
The TOA V-1000 Series power amplifiers come in 4 output
power ratings, from 60 watts to 360 watts. Both AC mains
(50/60Hz) and DC 24V operation are possible, so
performance can remain uninterrupted even during power
outages. Two program inputs and two priority inputs are
provided, with each pair parallel connected for cascade
connection of amplifiers. The priority inputs takes
precedence over the program inputs. In priority operation
mode, a built-in relay contact allows emergency
announcements to go through regardless of volume
control settings in the 3-wire or 4-wire connection systems.
The emergency announcement volume and the muting
level are both adjustable with semi-fixed controls.
Frequency response is from 40Hz to16kHz (at 1/3 rated
output), and total harmonic distortion is less than 1%, while
the S/N ratio is better than 80dB. Four transformercoupled outputs are provided: 4 ohms, 50V, 70V, and
100V. (Output terminals are pre-wired to 50V and 100V.
4 ohms output is not available on the VP-1240B and
PA-3640VB.) An output current limiter enhances the unit's
reliability. The YA-1000A fault detection circuit module
(optional) can also be installed to detect faults in the
amplifier and the speaker line. All models except the PA3640VB are designed for both desk-top use and rack
mounting use. The PA-3640VB is exclusively designed
for rack mouting.
FEATURES
1. Rated output power: VP-1060B: 60W; VP-1120B:
120W; VP-1240B: 240W; PA-3640VB: 360W
2. Suitable for use in public address applications.
3. Two each of parallel-connected program and
priority inputs. (Program inputs are muted during
priority operation.)
4. Relay contact enables emergency announcements at
any time.
5. Operates on both AC mains and 24V DC.
6. Wide 40Hz to 16kHz frequency response.
7. Distortion of less than 1% (at 1kHz, rated output).
8. Four transformer-coupled outputs: 100V, 70V, 50V and
4 ohms. (4 ohms output is not available on the
VP-1240B and PA-3640VB.)
9. Output current limiter.
CHARACTERISTICS DIAGRAMS
VP-1060B
VP-1120B
VP-1240B
VP-3640VB
BLOCK DIAGRAM
OPTIONAL ACCESSORIES
YA-1000A
Fault Detection Circuit Module
The YA-1000A module is designed for
use with VP Series power amplifiers and
VM Series mixer power amplifiers.
It detects breakages in the speakeramplifier line loop by means of a
20kHz pilot signal. If there is any
breakage, the amplifier POWER LED
indicator goes out, activating the unit's
relay output.
YM-003LB
Rack
Mounting
Bracket
Left/right pairs of brackets
for mounting VP amplifiers in
19" cabinet racks
Dimensions (W x H x D): 25 x 133 x 300mm
Weight: 500g Color: Black
Connection Diagram
YB-121B
Rack
Mounting
Bracket
Designed for
single rack
mounting bracket
for half-sized (19") power
amplifiers (VP amplifiers).
Dimensions (W x H x D): 24 5 x 133 x 40mm
Weight: 290g Color: Black
YJ-120B Joint Metal Plate
YM-06A/09A/12A Stacking Brackets
Pairs of brackets for stacking up to 4 VP amplifiers.
YM-06A: A pair of brackets for
stacking 2 equipment units of
3-unit size.
Dimensions (W x H): 30 x 273 5mm (6-size)
Weight: 290g Color: Dark gray
YM-09A: A pair of brackets for
stacking 3 equipment units of
3-unit size.
Dimensions (W x H): 30 x 415mm (9-size)
Weight: 430g Color: Dark gray
YM-12A: A pair of brackets for
stacking 4 equipment units of
3-unit size.
YM-06A
YM-09A
YM-12A
Dimensions (W x H): 30 x 556 5mm (12-size)
Weight: 580g Color: Dark gray
Designed to mount side-by-side
with 2 half-sized (19") amplifiers
(VP amplifiers) in 19" cabinet rack.
YR-1005/1010/1020
Connecting Cables with
5-Pin DIN Socket
YR-1000
Connecting Cable
with 8-Pin DIN Socket
YR-1005: 50cm long
YR-1010: 100cm long
YR-1020: 200cm long
Length: 70cm
Using with V-1090B
interface module.
Connector: 5-pin DIN socket
Cable: Multi-Cable; 1 shielded cable and
2 cables
Connector: 8-pin DIN socket
Cable: Multi-Cable; 1 shielded cable and
5 cables, 70 cm long
SPECIFICATIONS
Model
VP-1060 B
VP-1120 B
VP-1240 B
PA-3640V B
Rated Output Powe r
60W RMS
120W RMS
240W RMS
360W RMS
40Hz—16kHz ±3dB (at 1/3 rated output)
40Hz—16kHz ±2dB (at 1/3 rated output)
Less than 1% (at rated output f=1kHz)
2 Program Inputs (parallel); 0dB 100k ohms (balanced)
2 Priority Inputs (parallel); 0dB 100k ohms (balanced)
Better than 80dB
Frequency Response
Distortion
Inputs
S/N Ratio
Indicators
Outputs and Load
Impedance
Power Consumption
At No-Signa l
At Rate d Output
Power Requiremen t
Dimensions
Weight
Color
Environmental
Conditions
100V/167 ohms , 50V/42 ohms
(70V/83 ohms, 4 ohms)
Green LED Power Indicator, Red LED Priority Indicator
100V/83 ohms , 50V/21 ohms
100V/42 ohms, 50V/10 ohms
(70V/42 ohms, 4 ohms)
(70V/21 ohms)
25VA
200VA
29 VA
350 VA
35VA
650VA
220-240V AC 50/60 Hz, 24V DC
216(W)x 144(H)x340(D)mm
433.5(W) x 144.0(H) x 340 0(D)mm
8.5kg
20.8kg
10.3kg
Black
Operating temperature: -10°C to +50°C
Storage temperature: -40°C to +70°C
Relative humidity: Less than 95%
100V/27.8 ohms, 50V/6.9 ohms
(70V/13.9 ohms)
60VA
780VA
230/240V AC 50/60 Hz, 24V DC
483.0(W) x 177 0(H) x 315.5(D)mm
22.2kg
*Specifications are subject to change without notice.
*Specifications are measured at environmental condition of 20°C.
APPEARANCE AND DIMENSIONAL DIAGRAM
VP-1060B/1120B
PA-3640VB
VP-1240B
TOA Corporation
Printed in Japan (806) 833-62-290-1B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising