TOA | VR-1001B | manual | TOA VR-1001B User manual

TOA VR-1001B User manual
INSTRUCTION MANUAL
PAGING MICROPHONE
VR-1001B
Thank you for purchasing TOA’s Paging Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. GENERAL DESCRIPTION
The VR-1001B is a unidirectional paging microphone designed for use with the V-1000 series Mixer power
amplifier. It is equipped with a Push-to-talk (PTT) key, Speech and Chime indicators, and an output cable with
two 5-pin DIN plugs. When the VR-1001B is connected to a chime module, pressing the PTT key causes a
chime to sound (Chime indicator lights), then the microphone to turn on (Speech indicator lights).
2. APPEARANCE
3. CIRCUIT DIAGRAM
Speech indicator
Push to talk.
4
1
Chime indicator
2
5
3
Shield
CHIME
SPEECH
Body earth
Push-to-talk key
4
1
2
5
3
5-pin DIN plug
5-pin DIN plugs
4. SPECIFICATIONS
Type
Polar Pattern
Impedance
Output Level
Frequency Response
Switch
Indicators
Finish
Dimensions
Weight
Moving-coil type
Unidirectional
600 Ω, Balanced
-58 dB (1 kHz, 0 dB = 1 V/Pa)
100 Hz to 10 kHz
Push-to-talk key
Chime indicator : Red (LED)
Speech indicator : Green (LED)
Microphone head : Zinc plated steel wire, gray, paint
Main unit :
ABS resin, gray
100 (w) x 212 (h) x 150 (d) mm (3.94" x 8.35" x 5.91")
400 g (0.88 lb) (cable not included)
Note: The design and specifications are subject to change without notice for improvement.
URL: https://www.toa.jp/
133-04-00025-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising