Enforcer GW-SD31W Installation Manual

Enforcer GW-SD31W Installation Manual
GW-SD31W Smoke Detector Wire Guard
GW-SL31W Strobe Light Wire Guard
Manual
Parts List:
1x
4x
Wire guard
Mounting clamps
4x
4x
Mounting screws
Plastic wall anchors
Installation:
GW-SD31W Smoke Detector Wire Guard
Ø 3/16" (5mm) Holes for
wall anchors
Wall anchors
(included)
Ø 93/16" (234mm)
Ø 5/32"
(4mm)
Ø
81/2"
(216mm)1
Mounting clamps
(included)
Ø 63/8" (162mm)1
213/16"
(71mm)2
31/8"
(80mm)
1Maximum
2Maximum
Mounting screws
(included)
and minimum inside widths
inside depth
GW-SL31W Strobe Light Wire Guard
Ø 3/16" (5mm) Holes for
wall anchors
Ø 5/32"
(4mm)
Ø 55/16" (135mm)
Ø 45/8" (117mm)1
Ø 39/16" (90mm)1
Wall anchors
(included)
Mounting clamps
(included)
311/16"
(94mm)
33/8"
(85mm)2
1Maximum
2Maximum
Mounting screws
(included)
and minimum inside widths
inside depth
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for
1 (one) year from the date of sale to the original customer.
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is not responsible for misprints. Copyright © 2017 SECO-LARM U.S.A., Inc. All rights
reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM.
SECO-LARM ® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Phone: (949) 261-2999 | (800) 662-0800
Website: www.seco-larm.com
Email: sales@seco-larm.com
®
PITSW1
Order Part# 762-119%
MI_GW-Sx31W_170120.docx
SECO-LARM U.S.A., Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement