Seiko Y182 Analog Quartz User manual

Seiko Y182 Analog Quartz User manual
You are now the proud owner of a SEIKO Analogue Quartz Watch Cal.
Y182. For best results, please read the instructions in this booklet
carefully before using your SEIKO Analogue Quartz Watch. Please keep
this manual handy for ready reference.
Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. Y182.
Per ottenere i migliori possibili risultati dal vostro orologio, leggere
attentamente le istruzioni di questo manuale prima di utilizzare il vostro
orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per
ogni qualsiasi eventuale futuro riferimento.
ENGLISH
English
CONTENTS
Page
FEATURES ..................................................................................................................
DISPLAY AND CROWNS/BUTTONS ..........................................................................
DATE SETTING ...........................................................................................................
TIME SETTING ............................................................................................................
ALARM .......................................................................................................................
STOPWATCH ..............................................................................................................
TACHYMETER ............................................................................................................
ADJUSTING THE HAND POSITION ............................................................................
RESETTING THE BUILT-IN IC .....................................................................................
BATTERY LIFE INDICATOR ........................................................................................
BATTERY CHANGE .....................................................................................................
SPECIFICATIONS ........................................................................................................
✩ For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.
2
3
4
5
6
7
10
13
15
16
17
17
18
Cal. Y182
English
SEIKO ANALOGUE QUARTZ
FEATURES
TIME/CALENDAR
● Hour & minute hands with small
second hand
● Date displayed in numerals
ALARM
● Can be set on a 12-hour basis
with small alarm hands.
STOPWATCH
● Measures up to 30 minutes in 1/5
second increments.
● Can measure repeatedly up to 6
hours.
TACHYMETER
● For models with tachymeter scale
3
English
DISPLAY AND CROWNS/BUTTONS
There are three buttons and two crowns.
STOPWATCH minute hand
STOPWATCH 1/5 second hand
Minute hand
(MAIN TIME)
B
A
10
20
Hour hand
(MAIN TIME)
5
25
30
a b c
MIN.
CROWN 1
Second hand
(MAIN TIME)
12
1
3
9
2
10
11
ALARM
6
5
C
a: Normal position
a
b
c
CROWN 2
ALARM hour hand
4
Date
4
8
7
ALARM minute hand
b: First click
c: Second click
DATE SETTING
CROWN 1
1
➠
1
1
2
Pull out to first click.
English
Date
▼
2
➡
CROWN 1
Turn clockwise until the date for
the previous day appears.
▼
3
➠
3
Pull out to second click and turn
until the desired date appears.
▼
4
Push back in to normal position.
➠
4
NOTES
1 Do not set the date between 9:00 p.m. and 3:00 a.m. Otherwise, the date may not
change properly.
* If it is necessary to set the date during that time period, first change the time to any time outside
this period, set the date and then reset the correct time.
2
It is necessary to adjust the date at the end of February and 30-day months.
5
English
TIME SETTING
Hour hand
CROWN 1
Minute hand
1
1
➠
2
15
45
60
➠
30
3
▼
2
CROWN 1
Turn to set Hour and Minute
hands.
▼
3
Second hand
Pull out to second click when
Second hand is at the 12 o’clock
position.
Push back in to normal position
in accordance with a time signal.
NOTES
1 When setting Hour hand, check that AM/PM is correctly set.
* The watch is so designed that the date changes once in 24 hours. Turn the hands past the 12
o’clock marker to determine whether the watch is set for the A.M. or P.M. period. If the date
changes, the time is set for the A.M. period. If the date does not change, the time is set for
the P.M. period.
2
6
When setting Minute hand, advance it 4 to 5 minutes ahead of the desired time and
then turn it back to the exact minute.
ALARM
English
● Alarm time is set on a 12-hour basis.
● ALARM hands move independently of MAIN TIME hands.
ALARM SETTING
1
Adjustment of ALARM hands
• After the main time is adjusted, follow the procedure below, and then set the
alarm.
* The following procedure is necessary only after the main time is adjusted.
Hour hand
(MAIN TIME)
Minute hand
(MAIN TIME)
CROWN 2
1
ALARM
minute hand
12
1
➠
3
9
2
10
11
ALARM
4
8
ALARM
hour hand
6
3
2
1
Turn clockwise or counterclockwise
to set ALARM hands to the current
time (MAIN TIME).
▼
5
➠
7
Pull out to second click .
▼
CROWN 2
2
3
Push back in to normal position .
▼
7
Alarm time setting
English
2
* Once ALARM hands are adjusted to the main time, alarm time setting can be made only by
following the procedure below.
CROWN 2
Pull out to first click.
▼
C
12
3
9
2
ALARM
CROWN 2
4
8
7
6
5
➠
C
▼
➠
1
10
11
Press to set ALARM hands to
the desired alarm time.
Push back in to normal position.
CROWN 2
NOTES
8
1
When setting ALARM minute hand to the current time in 2 , advance it 4 to 5
minutes ahead of the desired time and then turn it back to the exact minute.
2
3
Alarm hands move quickly if Button C is kept pressed.
If CROWN 2 is pulled out to first click within 1 minute after being pushed back in
to normal position in 3 , the alarm sounds.
ALARM ENGAGEMENT/DISENGAGEMENT
9
4
5
[Alarm engaged]
1
ALARM
Current time
8
6
12
3
3
8
7
11
2
2
Designated
alarm time
➠
10
1
ALARM
Push back in to normal
position.
9
12
10
11
CROWN 2
4
Pull out to first click.
7
6
5
[Alarm disengaged]
➠
CROWN 2
• Alarm disengagement
English
• Alarm engagement
NOTES
1 Alarm rings at the designated time for 20 seconds.
* To stop it manually, press Button A, B or C, or push CROWN 2 back in to normal position.
2
If CROWN 2 is pulled out to second click, the designated alarm time is canceled
with a warning beep.
* In that case, set ALARM hands to MAIN TIME again, push CROWN 2 back in to normal position,
and then, pull it out to first click and set the desired alarm time again. However, if CROWN 2
is pushed back in to normal position before the warning beep stops, the designated alarm time
will not be canceled.
9
English
STOPWATCH
● Stopwatch measures up to 30 minutes in 1/5 second increments.
● After 30 minutes, it will start counting again from “0” repeatedly up to 6 hours.
STOPWATCH OPERATION
STOPWATCH
minute hand
25
30
• Before using the stopwatch:
A
20
10
5
B
MIN.
CROWN 1
CROWN 2
STOPWATCH
1/5 second hand
10
• Check that CROWNS 1 and 2
are set at normal position.
• Press Button B to reset STOPWATCH hands to “0” position.
* If the hands do not return to “0”
position, follow the procedure in
“ADJUSTING THE HAND POSITION” (page 15).
1 Standard measurement
A
▼
A
START
▼
A
STOP
B
English
B
RESET
START
STOP
○
○
○
A
▼
A
▼
A
▼
A
▼
2 Accumulated elapsed time measurement
STOP
RESTART
B
RESET
* Restart and stop of stopwatch can be repeated by pressing Button A.
○
○
○
A
▼
B
▼
B
▼
A
▼
3 Split time measurement
B
RESET
SPLIT
STOP
RELEASE
* Measurement and release of split time can be repeated by pressing Button B.
START
SPLIT
11
START
FINISH TIME
OF 1ST
COMPETITOR
2ND
COMPETITOR
FINISHES
B
FINISH TIME
OF 2ND
COMPETITOR
▼
A
▼
B
▼
A
▼
English
4 Measurement of two competitors
B
RESET
NOTES
1
If CROWN 1 is pulled out to second click, STOPWATCH hands are reset to “0”
position.
2
If CROWN 2 is pulled out to first or second click, STOPWATCH hands are reset to
“0” position.
When stopwatch has been reset and Button A is pressed before the hands reach
“0” position, stopwatch still starts counting when Button A is pressed.
3
12
English
TACHYMETER
(for models with tachymeter scale on the dial)
To measure the hourly average speed of a vehicle
25
30
STOPWATCH
second hand:
40 seconds
20
Tachymeter scale indicated by
STOPWATCH second hand gives
the average speed per hour.
Ex. 1
5
2
Use the stopwatch to determine
how many seconds it takes to go
1 km or 1 mile.
10
1
MIN.
Tachymeter scale: “90”
“90” (tachymeter scale figure) x 1 (km or mile)
= 90 km/h or mph
* Tachymeter scale can be used only when the time required is less than 60 seconds.
Ex. 2: If the measuring distance is extended to 2 km or miles or shortened to 0.5 km or miles
and STOPWATCH second hand indicates “90” on tachymeter scale:
“90” (tachymeter scale figure) x 2 (km or mile) = 180 km/h or mph
“90” (tachymeter scale figure) x 0.5 (km or mile) = 45 km/h or mph
13
Ex. 1
30
5
Use the stopwatch to measure
the time required to complete 1
job.
25
1
20
10
English
To measure the hourly rate of operation
MIN.
2
Tachymeter scale indicated by
STOPWATCH second hand gives
the average number of jobs accomplished per hour.
STOPWATCH
second hand:
20 seconds
Tachymeter scale: “180”
“180” (tachymeter scale figure) x 1 job
= 180 jobs/hour
Ex. 2: If 15 jobs are completed in 20 seconds:
“180” (tachymeter scale figure) x 15 jobs = 2700 jobs/hour
14
ADJUSTING THE HAND POSITION
CROWN 1
B
A
20
10
5
25
30
MIN.
➠
CROWN 1
English
● If STOPWATCH hands will not return to the 12 o’clock position when the stopwatch is
reset or when the battery is replaced with a new one, follow the procedure below.
Pull out to second click.
▼
A
Press repeatedly to reset
STOPWATCH minute hand to
the 12 o’clock position.
▼
B
Press repeatedly to reset
STOPWATCH second hand to
the 12 o’clock position.
➠
▼
CROWN 1
Push back in to normal position.
NOTES
1 Hands move quickly if the respective buttons are kept pressed.
2 After adjusting the hand position, set the main time.
15
English
RESETTING THE BUILT-IN IC
● In case any of the hands should move improperly, follow the procedure below to adjust
the hand movement.
CROWN 1
B
20
10
5
25
Pull out to second click.
▼
A
30
MIN.
CROWN 1
➠
A
AND
B
Press simultaneously.
▼
CROWN 1
Push back in to normal position.
➠
NOTE
Before using the watch again, be sure to adjust the position of STOPWATCH hands and
set the main time and alarm.
16
BATTERY LIFE INDICATOR
English
● When the battery nears its end, the small second hand moves at two-second intervals
instead of normal one-second intervals to indicate that the battery needs to be replaced
with a new one.
* If the alarm is used while the second hand is moving at two-second intervals, the watch
may stop operating. Therefore, if you see the second hand moving at two-second intervals,
replace the battery with a new one as soon as possible.
BATTERY CHANGE
2
Years
The miniature battery which powers your watch should last approximately
2 years. However, because the battery is inserted at the factory to check
the function and performance of the watch, its actual life once in your
possession may be less than the specified period. When the battery
expires, be sure to replace it as soon as possible to prevent any malfunction.
For battery replacement, we recommend that you contact an AUTHORIZED
SEIKO DEALER and request SEIKO SR927W battery.
WARNING
● Do not remove the battery from the watch.
● If it is necessary to take out the battery, keep it out of the reach of children. If
a child swallows it, consult a doctor immediately.
17
English
CAUTION
● Never short-circuit, heat or otherwise tamper with the battery, and never
expose it to fire. The battery may burst, become very hot or catch fire.
● The battery is not rechargeable. Never attempt to recharge it, as this may cause
battery leakage or damage to the battery.
SPECIFICATIONS
18
1
2
Frequency of crystal oscillator ...........
Loss/gain (monthly rate) .....................
3
4
5
6
Accuracy of alarm ...............................
Operational temperature range ..........
Driving system ...................................
Display system
Time ............................................
Date .............................................
Stopwatch ...................................
32,768 Hz (Hz = Hertz ... Cycles per second)
Less than 20 seconds at normal temperature range (5°C ~
35°C) (41°F ~ 95°F)
±1 minute
–5°C ~ +50°C (23°F ~ 122°F)
Step motor, 4 pieces
Three hands (Hour, minute and small second hands)
Displayed in numerals.
Minute and 1/5 second hands
The stopwatch can measure up to 30 minutes in 1/5 seconds.
Alarm ........................................... Small hour and minute hands
The alarm is set on a 12-hour basis.
7 Battery ...............................................
SEIKO SR927W, 1 piece
8 IC (Integrated Circuit) ......................... C-MOS-LSI
* The specifications are subject to change without prior notice for product improvement.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement