Barco Adjustable frame for Galaxy NH-12 Galaxy NW-12 Galaxy NW7 Installation guide

Adjustable frame for (Galaxy) NH/NW-12
Installation manual
R9843110
R59770452/00
19/08/2009
Barco nv Simulation Division
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.82.11
Fax: +32 56.36.84.86
E-mail: [email protected]
Visit us at the web: www.barco.com
Printed in Belgium
1. Safety
1. SAFETY
1.1
Safety warnings
WARNING: This procedure is intended for use only by BARCO authorized technicians.
WARNING: Be sure that the projector is powered down and that the power cord is removed from the wall
outlet.
Wait until the projector is cooled down before starting the procedure.
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
1
1. Safety
2
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
2. Description of the adjustable frame for NH/NW-12
2. DESCRIPTION OF THE ADJUSTABLE FRAME FOR
NH/NW-12
2.1
Purpose
Description
The adjustable frame is used to install a single projector of the NH/NW-12 range and to allow an easy adjustment of the projector.
The projector is fixed at 3 positions using the projector feet positions.
The adjustable frame allows following projector position adjustments:
•
forward/backward
•
horizontal rotation angle
•
height
P1
P2
P3
Image 2-1
The adjustable frame and its 3 fixation points
2.2
Related products
Overview
Product number
Description
R9843100
CM100 adaptor plate
R9827341
CM100 with pulley
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
3
2. Description of the adjustable frame for NH/NW-12
4
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
3. Installation
3. INSTALLATION
Overview
•
Mounting the projector on the frame
•
Adjustments
•
Dimensions
3.1
Mounting the projector on the frame
Necessary tools
•
Slotted screwdriver
•
Nut spanner or open ended spanner M4 + M6
How to prepare the projector?
1. Turn out the 3 projector feet.
Mount the following items on the feet positions of the Projector.
a) blocking plate
b) spacer
c) special nut
d) knurled nut
a
b
c
d
Image 3-1
2. Use the open ended spanners to firmly tighten the bolts.
3. Place the projector onto the frame and mount the remaining knurled nuts and lock nuts on each special bolt.
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
5
3. Installation
3.2
Adjustments
Height adjustment
The following table specifies the height adjustment on the adjustable frame:
Function:
Effect on image:
position vertically the projector
•
two of the three points: rotation of the image
•
rear point or 2 front points: (vertical) keystone correction
•
3 points: vertical shift
Range:
12,5 mm
Used parts:
3 x positioning nut
indication 2 on image
3 x locking nut
indication 3 on image
Image 3-2
Height adjustment : Used parts (perspective view without projector)
1
2
3
4
6
extra fixation plate (allows extra fixation using security cable etc.)
positioning nut
plate
locking nut
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
3. Installation
1
2
3
Image 3-3
Image 3-4
Height adjustment (left view with projector installed)
Translation adjustment
The following table specifies the translation adjustment on the adjustable frame:
Function:
position horizontally the projector
Effect on image:
Zoom in/out
Range:
125 mm
Used parts:
1 x threaded rod
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
indication 1 on image
7
3. Installation
indication 2 on image
6 x locking nuts
1
2
Image 3-5
Adjustable frame: Translation adjustment
1
2
threaded rod
locking nut
Rotation
The following table specifies the rotation adjustment on the stackable frame:
Function:
allows to rotate projector around one center point
Effect on image:
(horizontal) keystone correction
Range:
5°
indication A on image
Used parts:
locking nuts, one of them acting as rotation center
indication 1 on image
A
1
Image 3-6
Adjustable frame (bottom view): rotation adjustment
1
A
8
locking nut (acting also as rotation center)
rotation angle
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
3. Installation
3.3
Dimensions
Dimensions
40
88
120,5
The following image shows the dimensions (in mm) of the standalone adjustable frame and when used in a stacked configuration:
925
948,5
318,5
545
818,5
500
630
121,5
590,07
720
Image 3-7
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
9
3. Installation
10
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
A. Adaptor plate for the CM 100 (R9843100)
A. ADAPTOR PLATE FOR THE CM 100 (R9843100)
A.1
Description
Exploded view of the total assembly
The adjustable frame for NH/NW-12 can also be used in combination with the ceiling mount CM100. This is done by using an adaptor
plate.
The following image shows how the adaptor plate is used between the CM100 and the adjustable frame:
1
2
A
3
B
C
4
Image A-1
The following table show the components of the total assembly and the mounting components:
Component
Description
1
Upper part of the CM100
2
Lower part of the CM100
3
Adaptor plate for CM100
4
Adjustable frame
A
Hexagon head screw M8 x 20
B
Plain washer
C
Hexagon spacer (M8) with interior and exterior thread
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
11
A. Adaptor plate for the CM 100 (R9843100)
For more information on the CM100, read the Installation manual R5975693.
A.2
Dimensions
Dimensions: side and top view
Image A-2
Adjustable frame + CM100: dimensions
12
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
A. Adaptor plate for the CM 100 (R9843100)
Dimensions: front view
Image A-3
Adjustable frame + CM100: dimensions
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
13
A. Adaptor plate for the CM 100 (R9843100)
14
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
Index
INDEX
A
M
Adaptor plate 11
description 11
Adaptor plate for the CM 100
Adjustments 6
Mounting 5
projector on frame
D
Description 3, 11
adjustable frame 3
dimensions 12
CM100 + adj frame 12
Dimensions 9
5
11
P
Purpose
3
R
Related products
3
S
I
Installation 5–6
adjustments 6
Safety 1
Safety warnings
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
1
15
Index
16
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
List of images
LIST OF IMAGES
2-1
3-2
3-4
3-5
3-6
A-2
A-3
The adjustable frame and its 3 fixation points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Height adjustment : Used parts (perspective view without projector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Height adjustment (left view with projector installed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Adjustable frame: Translation adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjustable frame (bottom view): rotation adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Adjustable frame + CM100: dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjustable frame + CM100: dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
17