Barco F90-4K13 User manual

Sales Support - Projection
Supported SDI video formats for Barco F70 and F90 projectors.
Introduction
Barco F70 and F90 projectors supports 3G-SDI and HD-SDI standard video interfaces via BNC
connectors. Supported video formats listed in this document are applicable to Barco F70 and F90 and
have been tested with these units. Please note that only the video formats described in this document
are tested and that other untested video formats using SDI might not give the desired results.
SDI module specifications
PARAMETER
VALUE
Standard
SMPTE 424M-2006
10bit level A
(2x) BNC 75 ohm type IEC 60169-8, Amendment 2 1997, A
Connector 1: In
Connector 2: Out
3 GHz
>10dB at 3GHz
75 ohm resistive
Connectors
Bandwidth
Return loss
Impedance
Supported video formats
FORMAT
1080
1080
1080
720
720
720
720
720
720
720
720
1080
1080
1080
1080
1080
1200
1200
1200
3G-SDI
50p
59.94p
60p
24p
25p
30p
50p
60p
23.98p
29.97p
59.94p
24p
25p
30p
23.98p
29.97p
50p
59.94p
60p
Supported SDI formats F70/F90
eries projectors
www.barco.com
●
●
●
Page 1 of 1
GENERAL RELEASE APPROVED
HD-SDI
●
●
●
●
●
●
●
●
●
●
●
●
●
V1.0 – EBM 04/17
Barcolink
●
●
●