Optoma BE Live5 User Manual

BE Live5
Bluetooth In Ear Headphones
User Manual
Regulatory model name APBELIVEU
Version V1.3e
Contents
CONTENTS ............................................................................................................................................... 1
WHAT’S IN THE BOX ............................................................................................................................. 2
BE LIVE5 EARPHONES ............................................................................................................................ 3
THE BASICS ............................................................................................................................................ 4
Charging Your BE Live5 .................................................................................................................... 4
Checking Battery Level .................................................................................................................... 5
Bluetooth Pairing ............................................................................................................................ 6
Power On/Power Off ....................................................................................................................... 7
Wearing Your BE Live5..................................................................................................................... 8
Handling Phone Calls ...................................................................................................................... 9
Listening to Music ........................................................................................................................... 9
Pairing with a Laptop .................................................................................................................... 10
Pairing with a Mac ........................................................................................................................ 11
MISCELLANEOUS ................................................................................................................................ 12
Multipoint Connections ................................................................................................................. 12
Restore Factory Settings ................................................................................................................ 14
Voice Prompts list .......................................................................................................................... 15
Disclaimer...................................................................................................................................... 15
Federal Communication Commission Interference Statement ...................................................... 16
CE .................................................................................................................................................. 17
NCC ................................................................................................................................................ 18
IMDA ............................................................................................................................................. 18
SPECIFICATION........................................................................................................................................ 19
1
WHAT’S IN THE BOX
BE Live5 earphones
(with inline controller
and microphone)
3 pairs of silicon tips
(S/M/L)
2 pairs of foam tips
(M/L)
3pairs of stabilizers
(in S/M/L)
Cable loop for
adjusting the length
of cable
Pouch
Charging cable
(Micro-USB)
Basic user’s manual
Safety Instruction
2
BE Live5 EARPHONES
1.
2.
3.
4.
5.
6.
Volume Up Button
Power/Function Button
Volume Down Button
LED Indicator
Charging port
Microphone
3
The BASICS
Charging Your BE Live5
Although your BE Live5 in-ear headphones come with a partially charged
battery, it is recommended that you fully charge your BE Live5 before
first use.
1. Open the charge port cover on the in line controller.
2. The charge cable should be connected to the charge port and
either to a PC or a dedicated USB charger.
3. When charging, the LED indicator is red.
4. LED Indicator turns blue once charging is complete.
NOTE: It takes up to 2.5 hours to fully charge the BE Live5.
4
Checking Battery Level
You can check the battery level of your BE Live5 with the LED indicator
To check battery level:
1. Press the Power/Function, volume up, and volume down buttons
simultaneously while Bluetooth connected.
2. The LED indicator will flash red and blue simultaneously. The
battery level will be indicated by the number of flashes, as
described in the table below:
Number of Flashes Battery Level
Number of flashes
Voice prompts
2
Battery low
3
Battery at 50%
5
Full battery
NOTE: When the battery level is very low, you will hear a beep or a
“Battery Low” voice prompt from your BE Live5 every 2 minutes when the
estimated battery reserve remaining time is under 15minutes.
IN ADDITION:
1. Users with iOS devices and some Android models will be able to
view the battery status on their device’s display
*On some Android and all Windows operated devices you cannot check
the battery level for your BE Live5 when you listen to music, in the middle
of a phone call or in pairing mode.
5
Bluetooth Pairing
Using your BE Live5 for first time
Pairing BE Live5 with source device
1. Press and hold the BE Live5’s Power/Function button for 4
seconds until the LED indicator light flashes blue/red. Your BE Live5
is now in pairing mode.
2. Turn on Bluetooth® on your source device, then select “BE Live5”
once it appears on the device list.
NOTE: Consult your source device’s user manual for instructions on activating
Bluetooth.
3. Once successfully paired, the LED indicator will flash blue and
you hear “Primary device connected” from your BE Live5.
Please note:
A. You must always enter “Pair” mode from a powered-off state.
Otherwise, pressing and holding the Power/Function button for
more than 3 seconds from a powered-on state turns the BE Live5
off.
B. If left inactive in pairing mode, your BE Live5 will automatically
6
power off after 3 minutes.
C. Your BE Live5 can store pairing information for up to eight
devices.
To pair additional devices to your BE Live5 ensure that your BE
Live5 is not concurrently connected to any device, then repeat the
steps 1,2,3 outlined above.
In case where your BE Live5 have already stored pairing
information for eight devices and a ninth device is paired, the
stored information for the very first device will be deleted.
Power On/Power Off
To power on your BE Live5, press Power/Function button for about 2
seconds until the LED indicator flashes blue and you hear the “Power
on”.
NOTE:
Once you have successfully paired the BE Live5 to a Bluetooth-enabled
device, the BE Live5 will automatically connect with that device once it is
powered on again. For more information check “Bluetooth Pairing”
section.
If you have stored pairing information for multiple devices and more than
one of those devices is Bluetooth enabled, the BE Live5 will automatically
connect with the most recently paired device.
7
For more information read section “Multipoint Connections”.
To turn the BE Live5 to OFF, push Power/Function button for about 4
seconds until the LED indicator turns red and you hear the “Power off”.
Wearing Your BE Live5
To ensure a secure and comfortable fit when wearing your BE Live5:
1. Install the stabilizers on the BE Live5 after removing the ear
tips already placed on the boxed new set.*
2. Select right size of ear tips and install tips on BE Live5.
3. Rotate the stabilizers and place the BE Live5 into each ear so
that they are positioned comfortably.
*Please note, 3 different sizes of Ear wings are provided to offer optimal user’s comfort
Magnetic caps at the end of the earphones let users lock the
earphones together and secure them around user’s neck for ease of
use.
8
Handling Phone Calls
When your BE Live5 are connected to a Bluetooth-enabled smartphone
you can handle your phone calls directly using your BE Live5 in ear
headphones.
The followings describe phone call options:
Call option
Status
Action
Answer a call
Incoming call
Tap the Power/Function button
Decline a call
Incoming call
Press the Power/Function button for 2 seconds
End a call
In a call/outgoing call
Tap the Power/Function button
Redial the last number
Standby/connected
Tap the Volume Up and Volume Down simultaneously
Mute on or mute off microphone
In a call/outgoing call
Tap the Power/Function and Volume Up buttons
simultaneously
Switching handset/earphone voice
In a call
Press the Volume Up and Volume Down buttons
simultaneously for 2 seconds
Adjust the volume
Activate Siri (iOS) or Google Assistant
Tap the Volume Up or Volume Down button
Standby/Connected
Double tap the Power/Function button
(Android)
Listening to Music
You can enjoy and control Audio through the in line controller on your BE
Live5.
Audio option
Action
Play or pause audio
Tap the Power/Function button
Skip to next track
Press the Volume Up button for 2 seconds
Play previous track
Press the Volume Down button for 2 seconds
Adjust the volume
Tap the volume up or volume down button
*Please note: when muting the BE Live5 or reactivating it from MUTE there will be a very slight
delay
9
Pairing with a Laptop
The connection instructions below apply to owners of Windows 7, 8, 8.1
and 10.
1. Power your PC/Laptop
2. Find “Bluetooth Settings”
3. Switch your laptop Bluetooth to “On”
4. Turn the BE Live5 to “Pairing Mode”
5. When the BE Live5 is discovered by your laptop left click on “Pair”
6. Right click on the speaker symbol at the bottom right side of the
screen
7. From the dropdown menu right click on the “Playback Device”
8. Please choose and right click the “Headphones” (see image below
text)
9. Click on Bluetooth Headphones to set the “Headphones” as default
device
10.Press OK
10
Pairing with a Mac
The connection instructions below apply to owners of all current and
recent iOS versions
1. Power your Mac
2. Open “System Preferences”
3. Click on the Bluetooth symbol
4. Turn the BE Live5 to “Pairing Mode”
5. When the BE Live5 is discovered by your Mac click on “Pair”
6. Your Mac is now ready to play audio via the BE Live5
11
MISCELLANEOUS
Multipoint Connections
If you have stored pairing information for multiple devices and more
than one of those devices have Bluetooth enabled at the same time,
your BE Live5 will enable multipoint connection.
Multipoint connection allows your BE Live5 to hold connections with two
devices at the same time while playing audio signal from only one of the
two devices.
Multipoint connection works in the following ways:
• Your BE Live5 automatically connects with the most recently paired
device (“Primary device”).
• You must manually connect the second device (“Secondary device”)
to your BE Live5 via its operating system.
• The BE Live5 will prioritize the audio from Primary device.
• You can control Primary device using the BE Live5 in-line controller.
• When Primary device is idle, your BE Live5 can receive audio from
Secondary device.
• Secondary device must be controlled directly from its operating
system.
• Simultaneous audio from both devices is disabled.
Water Resistant
NuForce headsets with the IPX5 water ingress rating are splash-resistant
and water-resistant, preventing malfunctions due to moisture entering
the body of the headset. However, the splash-resistant and
water-resistant qualities are non-permanent and may degrade with wear
and tear from daily use. Liquid damage is not covered by the warranty.
•
To prevent liquid damage, please avoid the following situations:
 Wearing the headset while swimming or showering
 Exposing the headset to pressurized or high-speed water, such
as showering, water skiing, wakeboarding, surfing or riding a
water scooter, etc.
12
•
•
•
•
•
 Using the headset in a sauna or steam room
 Immersing the headset in water
 Operating the headset outside the recommended temperature
range, or in extremely humid conditions
 Dropping the headset or any other actions that cause the
headset to take impact
 Disassembling the headset, including the disassembling of
screws
 Not properly covering the USB charging port, causing water or
other foreign particles to enter the headset
Types of liquids covered by the water resistance rating
The water resistance rating only applies to fresh water and tap water.
Other liquids such as the following are not within the scope of the
water resistance rating: soap water, solutions mixed with detergents,
solutions mixed with bath products, shampoos, hot spring water,
swimming pool water, seawater, soap water, detergents, salt water,
perfumes, insect repellents, lotions, sunscreens, oils, gel removers,
hair dyes, and solvents.
Micro-USB port cover is crucial to maintaining the water-resistant
quality of the headset. When using the headset, make sure that the
Micro-USB port cover is tightly closed. If there are foreign particles
on the cover, or if the cover is not fully closed, the headset will lose
its water resistance capability.
If the headset has already come into contact with liquids, remove all
connected cables and do not charge the headset until it is fully dry.
Using or charging the headset or accessories while they are wet may
damage your headset.
The charging box (if any) containing the genuine wireless Bluetooth
headset does not have a waterproof design. Any water-resistant
qualities described in the product specifications are limited to the
body of the headset.
If the headset is not wiped after being worn during a workout, the
salt from the sweat may negatively impact the lifespan of the
headset. Therefore, we recommend that you use a clean cotton
cloth to wipe the headset after your workout, in order to keep the
headset clean.
13
Bluetooth Connectivity
Bluetooth is a short-range wireless technology. Its connection quality
may be interfered with metals, walls, and devices including but not
limited to microwave ovens. At the same time, Bluetooth’s 2.4 GHz
frequency is also shared by some Wi-Fi connections, which may result in
a slower connection. This technical problem cannot be completely
eliminated despite Bluetooth’s status as an international standard.
A Bluetooth headset’s wireless transmission is not limited to the
connection between the headset and the signal transmission device, but
also between the main and auxiliary earbud. Therefore, when using a
genuine wireless Bluetooth headset, we advise placing the signal
transmitting device (such as your cellphone) on the same side as the
main earbud in order to reduce the potential technical limitations of
Bluetooth signal shielding to some extent.
The connection quality of the Bluetooth headset is influenced by factors
such as the Bluetooth device connected to the headset, the
communication environment, or the environment in which it is used. If
the headset audio is intermittent, please run through the following
scenarios to identify and avoid the following caused by environmental
interference:
 There are obstacles such as people, metal objects, or walls between
the headset and the Bluetooth device.
 There is a Wi-Fi device in use near the headset.
 There is a microwave oven in use near the headset.
 There is an electromagnetic radiation generating device in use near
the headset.
 The distance between the headset and Bluetooth device exceeds 10
meters
Restore Factory Settings
When you restore the BE Live5 to its factory settings, the paired devices
stored will be deleted.
To restore factory settings:
1 Ensure that your BE Live5 are not connected to any device.
14
2 Put the BE Live5 in pairing mode.
3 Press simultaneously the Power/Function, Volume Up, and Volume
Down buttons for 2 seconds until the LED indicator flashes red five times
and you hear five short tones from the BE Live5.
Because all pairing information is deleted after restoring factory settings,
the BE Live5 will directly enter pairing mode once powered on.
Voice Prompts list
The BE Live5 are pre-loaded with English voice prompts
“Power On”
“Power Off”
“Full Battery”
“Battery at 50%”
“Battery Low”
“Primary device connected”
“Secondary device connected”
“Pairing Mode Activated”
Disclaimer
Please be advised, the BE Live5 is equipped with the latest technology however
functionality may vary by device.
15
Federal Communication Commission Interference
Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
16
CE
Max RF power:
BT BR+EDR（2402-2480MHz）: 2.7-4.7dBm
RF exposure information: The EIRP power of the device at maximal case is below the
exempt condition, 20mW specified in EN62479: 2010.
RF exposure assessment has been performed to prove that this unit will not generate
the harmful EM emission above the reference level as specified in EC Council
Recommendation (1999/519/EC).
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Excessive sound pressure from earphones and headphones can cause hearing loss.
Regulatory Conformance
Hereby, Optoma Corporation declares that the radio equipment type [Bluetooth
earphones APBELIVEU] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: www.optoma.com
Notice: This device may be used in each member state in EU
17
NCC
依據低功率電波輻射性電機管理辦法
第十二條
※經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
※低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾
現象時，應立即停用，並改善至無干擾時方得繼續使用。
-前項合法通信，指依電信法規定作業之無線電通信。
-低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設
備之干擾。
Administrative Regulations on Low Power Radio Waves Radiated Devices
warning:
Article 12
Without permission granted by the NCC, any company, enterprise, or user is
not allowed to change frequency, enhance transmitting power or alter original
characteristic as well as performance to a approved low power radio-frequency
devices.
Article 14
The low power radio-frequency devices shall not influence aircraft security
and interfere legal communications; If found, the user shall cease operating
immediately until no interference is achieved.
The said legal communications means radio communications is operated in
compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the
interference from legal communications or ISM radio wave radiated
IMDA
Complies with
IMDA Standards
DA107248
18
Specification
Connection type
Bluetooth type
Bluetooth 2.4GHz
V4.1
Bluetooth profile
HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4
A2DP Codec
SBC, Qualcomm® aptX™ audio, AAC
Cable length
580 mm
Driver Type
Dynamic
Driver size
8 mm
Impedance
16 Ω
Battery life (estimated)
Battery type
Microphone sensitivity
Up to 8 hours
Lithium-ion battery, Cylindrical Type, Typical
3.7V/55mAh x2 pcs
-42 dB
Frequency response
20Hz - 20kHz
Sensitivity
90dB at 1kHz
Range
Up to 10m
Weight
16g
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm
Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm
Technologies International, Ltd., registered in the United States and other countries, used with permission.
Optoma Corporation
19
www.optoma.com
20