Homedics LT-500 Instruction book

Homedics LT-500 Instruction book
LT500_A
8/24/04
10:39 AM
Page 1
ONE YEAR LIMITED WARRANTY
(Valid in USA only)
HoMedics, Inc., guarantees this product free from defects in material and workmanship for a period of one year from the date of original purchase, except as noted below.
Mail To:
HoMedics
Service Center, Dept. 168
3000 Pontiac Trail
Commerce Township, MI
48390
e-mail:
cservice@homedics.com
This HoMedics product warranty does not cover damage caused
by misuse or abuse; accident; the attachment of any unauthorized
accessory; alteration to the product; or any other conditions whatsoever that are beyond the control of HoMedics. This warranty is
effective only if the product is purchased and operated in the USA.
A product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications is not covered under
warranty. HoMedics shall not be responsible for any type of incidental, consequential or special damages. All implied warranties,
including but not limited to those implied warranties of fitness and
merchantability, are limited in the total duration of one year from
the original purchase date.
Color Cube™ 500
ColorMotion™Light
To obtain warranty service on your HoMedics product, either hand
deliver or mail the unit and your dated sales receipt (as proof of
purchase), postpaid, along with check or money order in the
amount of $10.00 payable to HoMedics, Inc. to cover handling.
Upon receipt, HoMedics will repair or replace, as appropriate, your
product and return it to you, postpaid. If it is appropriate to replace
your product, HoMedics will replace the product with the same
product or a comparable product at HoMedics’ option. Warranty is
solely through HoMedics Service Center. Service of this product by
anyone other than HoMedics Service Center voids warranty.
This warranty provides you with specific legal rights. You may have
additional rights which may vary from state to state. Because of
individual state regulations, some of the above limitations and
exclusions may not apply to you.
For more information regarding our product line in the USA,
please visit: www.homedics.com
© 2004 HoMedics, Inc. and its affiliated companies, all rights reserved. HoMedics® is a
registered trademark of HoMedics, Inc. and its affiliated companies. Color Cube™ and
ColorMotion™ are trademarks of HoMedics Inc. and its affiliated companies.
All rights reserved.
IB-LT500-A
Instruction Manual and
Warranty Information
LT-500
LT500_A
8/24/04
10:39 AM
Page 3
Experience the Magic of ColorMotion
Thank you for purchasing Color Cube 500. This product is built with highquality craftsmanship to provide you years of dependable service. We hope
that you will find it to be the finest product of its kind.
Create excitement anywhere. Inside this box lies the magic of the color cube.
It’s fun. It’s cool. And it’s created for your enjoyment. Use it at a party, chill with it,
study with it, boogie with it, sleep with it, decorate with it, meditate with it... use it
with your friends or by yourself. It’s in your hands from here... just enjoy it!
IMPORTANT SAFETY INSTRUCTIONS:
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER - To reduce the risk of electric shock:
• Always unplug the appliance from the electrical outlet immediately
after using and before cleaning.
• Do not reach for an appliance that has fallen into water. Unplug it
immediately.
• Do not place or store appliance where it can fall or be pulled into a tub or
sink. Do not place in or drop into water or other liquid.
WARNING - To reduce the risk of burns, fire, electric shock or
injury to persons:
• An appliance should never be left unattended when plugged in. Unplug
from outlet when not in use and before putting on or taking off parts or
attachments.
• Close supervision is necessary when this appliance is used by or near
children, invalids or disabled persons.
• Use this appliance only for its intended use as described in this manual.
Do not use attachments not recommended by HoMedics; specifically any
attachments not provided with the unit.
• Never operate this appliance if it has a damaged cord, plug, cable or
2
Caution: All
servicing of
this product
must be
performed by
authorized
HoMedics
Service
Personnel
only.
housing. If it is not working properly, if it has been dropped
or damaged, return it to HoMedics Service Center for
examination and repair.
• Keep cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being
used or where oxygen is being administered.
• Do not carry this appliance by the supply cord or use cord
as handle.
• To disconnect, remove plug from outlet.
• This appliance is designed for indoor use only. Do not use
outdoors.
SAVE THESE INSTRUCTIONS
Caution – Please read all instructions
carefully before operating.
• Never leave the appliance unattended, especially if children
are present.
• Never cover the appliance when it is in operation.
• This unit should not be used by children without
adult supervision.
• Always keep the cord away from high temperature and fire.
• To get the best effect, product must be placed on a
flat surface.
• Do not lift, carry, hang, or pull the product by the power
cord.
• If the adapter sustains damage, you must stop using this
product immediately and contact the HoMedics Service
Center for repair. (See the warranty section for the HoMedics
address.)
3
LT500_A
8/24/04
10:39 AM
Page 5
The Color Cube Features
Instructions for Use
• 48 hip colors create a fascinating display
• 4 ever-changing color patterns
• Lounge
• Daydream
• Doze
• Party
• Adjustable speeds for color programs
• 10 glowing solid color settings
• “Pause” feature freezes the color pattern on your favorite design
• Built-in digital sound machine with 4 acoustic rhythms
• Music Mic allows colors to move to your music
• 15, 30, 60 minute auto-timer
• LED lighting for long life
• For table-top or wall-mount use (hardware provided)
1. Attach the A/C adapter jack to the base of the unit (Fig 1).
2. Plug the cord into a 120V household outlet.
3. Press the POWER button (Fig 2). A corresponding LED will illuminate to
indicate the unit is on.
To use the solid colors
4. There are 10 solid colors from which to choose. Press the SOLID COLOR
button (Fig 2) repeatedly until you find your favorite color. After 10 presses,
the colors will repeat.
Figure 1
Control Panel
Mounting
Holes
Sensitivity Dial
Assembly
Volume Dial
Unpack the product and check to make sure everything is included (Fig 1).
Screw (2)
Table-top
Place the unit on a sturdy level surface.
Anchor (2)
Wall-Mount
1. Determine the location and height you are going to hang the unit.
NOTE:CHECK THE INTENDED WALL LOCATIONS FOR STRUCTURAL STRENGTH.
INJURY TO PERSONS AND DAMAGE TO UNIT AND/OR MOUNTING SURFACE
MAY RESULT IF UNIT IS PULLED FROM THE SURFACE. TO LIMIT THE LIKELIHOOD OF SUCH INJURY OR DAMAGE, MOUNT UNIT ON A STRUCTURAL WALL.
2. Using the position of the mounting holes on the back of the unit, mark the
position on the wall where the two holes will be drilled.
3. Drill two holes that accommodate the anchors provided. You may use a 7/32
inch drill bit.
4. Insert the wall anchors into the two holes.
5. Insert the screws into the wall anchors and tighten with a screwdriver.
6. Place the unit on the wall.
4
Adhesive
Feet (4)
A/C Jack
Adaptor
Figure 2
5
LT500_A
8/24/04
10:39 AM
Page 7
5. To select an interactive pattern, press the PATTERN button (Fig 2). Pattern
will automatically default to LOUNGE. Press the PATTERN button repeatedly
to select from DAYDREAM, DOZE, PARTY, OFF and then back to LOUNGE.
A corresponding LED will illuminate to indicate which program has been selected.
6. To pause on your favorite pattern, press the PAUSE/PLAY button (Fig 2)
and the unit will capture and display that pattern. A corresponding LED
will illuminate to indicate this feature is activated.
7. To resume the program, press the PAUSE/PLAY button again. The LED will
turn off. You may also select the PATTERN or SOLID COLOR button to leave
the pause.
8. To adjust the speed, press the SPEED button (Fig 2). Speed will
automatically default to SLOW when used for first time. Press the SPEED
button repeatedly to select from MEDIUM, FAST and back to SLOW.
A corresponding LED will illuminate to indicate which program has been
selected.
NOTE: When switching patterns, the speed of your choice will be retained
until the power is turned off. Once turned off, it will default to SLOW speed
for next use.
To use the Sounds
9. Press the RHYTHM button (Fig 2):
• One time for RELAX
• Two times for CHILL
• Three times for UNWIND
• Four times for DRIFT
• A fifth time will turn the sounds off.
A volume dial is located on the side of the unit (Fig 1). Turn the dial to select
desired volume.
10.Press the MUSIC MIC button (Fig 2) and a corresponding LED will
illuminate to indicate this feature is activated. Turn on music and watch the
pattern change to the music. The pattern will also change to other external
sounds such as people’s voices.
11. Using sensitivity dial (Fig. 2): Turn the dial to increase or decrease the level
of sensitivity of the microphone.
12. When you have finished using this feature, press the MUSIC MIC button
again to turn off. Or, you may select another function by pressing
PATTERN, SOLID COLOR or PAUSE/PLAY buttons. The LED light will turn
off to indicate MUSIC MIC is deactivated.
To use the Auto-Timer
13. To set the auto-timer to turn off any of the features, press the TIMER button
(Fig 2):
• One time for 15 minutes
• Two times for 30 minutes
• Three times for 60 minutes
• A fourth time will turn timer off.
A corresponding LED will illuminate to indicate the time selected.
NOTE: When switching features, the time set will be retained until the power
is turned off.
14. When finished using the Color Cube 500, press the POWER button to turn
the unit off. The LED will no longer be illuminated.
Optimal performance is achieved in moderate to darker room settings. It is not
recommended to position the Color Cube in direct facing light.
To use the Music Mic Feature
The Music Mic feature responds to music, voice or any other sound. The
colors and speed of the unit will change in relation to the volume. It will react to
the loudest source of sound.
• This product incorporates a dial to adjust the level of sound sensitivity.
- For loud music, position along the lower range of the dial.
- For soft to medium music, position along the medium to upper range
of the dial.
• For optimal performance, place the unit at least 3 - 4 feet from the
sound output source.
6
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement