Elation SIXPAR 200 User manual

Elation SIXPAR 200 User manual
 SIXPAR 200™
user manual | SIXPAR 200™ | user manual
www.elationlighting.com
©2019 ELATION PROFESSIONAL all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice.
ELATION PROFESSIONAL logo and identifying product names and numbers herein
are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ELATION brands and product
names are trademarks or registered trademarks of their respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to any
persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper,
unsafe, insufficient and negligent assembly, installation, rigging, and operation of
this product.
ELATION PROFESSIONAL USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-3322 | Fax 323-832-9142 | www.elationlighting.com | sales@elationlighting.com
ELATION PROFESSIONAL B.V.
Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 | Fax +31 45 546 85 96 | www.elationlighting.eu | info@elationlighting.eu
ELATION PROFESSIONAL Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
+52 (728) 282-7070 | ventas@adj.com
DOCUMENT
VERSION
Please check www.elationlighting.com for the latest revision/update of this manual.
Date
Document
Version
Software
Version
DMX Channel
Modes
2/2015
1
≥1.02
6/7/8/12
Initial release.
2/2019 1 ≥1.15 6/7/8/12 Updated DMX traits. Notes
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
CONTENTS
General Information
4
Warranty
6
Safety Instructions
7
General Guidelines
8
Fixture Overview
9
Fixture Installation
10
Understanding DMX
13
Fixture Menu
16
DMX Channel Functions And Values
19
Cleaning and Maintenance
22
Technical Specifications
23
Optional Accessories
25
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
GENERAL INFORMATION
INTRODUCTION
Congratulations, you have just purchased one of the most innovative and
reliable lighting fixtures on the market today! The SIXPAR 200™ has been designed
to perform reliably for years when the guidelines in this booklet are followed.
Please read and understand the instructions in this manual carefully and
thoroughly before attempting to operate this unit. These instructions contain
important information regarding safety during use and maintenance.
UNPACKING
Thank you for purchasing the SIXPAR 200™ by Elation Professional®. Every SIXPAR
200™ has been thoroughly tested and has been shipped in perfect operating
condition. Carefully check the shipping carton for damage that may have
occurred during shipping. If the carton appears to be damaged, carefully
inspect your unit for damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event damage has been found or parts are
missing, please contact our customer support team for further instructions. Please
do not return this unit to your dealer without first contacting customer support at
the number listed below. Please do not discard the shipping carton in the trash.
Please recycle whenever possible.
BOX CONTENTS
•
(1) powerCON Cable
•
Manual & Warranty Card
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
WARRANTY REGISTRATION
Please fill out the enclosed warranty card to validate your purchase. All returned
service items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. The R.A. number must be
clearly written on the outside of the return package. A brief description of the
problem as well as the R.A. number must also be written down on a piece of
paper and included in the shipping container. If the unit is under warranty, you
must provide a copy of your proof of purchase invoice. Items returned without a
R.A. number clearly marked on the outside of the package will be refused and
returned at customer’s expense. You may obtain a R.A. number by contacting
customer support at 323-582-3322.
CUSTOMER SUPPORT
Elation Professional® provides a customer support line, to provide set up help and
to answer any question should you encounter problems during your set up or
initial operation. You may also visit us on the web at www.elationlighting.com for
any comments or suggestions. For service related issue please contact Elation
Professional®.
ELATION PROFESSIONAL USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-3322 | Fax 323-832-9142 | www.elationlighting.com | sales@elationlighting.com
ELATION PROFESSIONAL B.V.
Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 | Fax +31 45 546 85 96 | www.elationlighting.eu | info@elationlighting.eu
ELATION PROFESSIONAL Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
+52 (728) 282-7070
CUSTOMER SUPPORT
Contact ELATION Service for any product related service and support needs.
Also visit forums.elationlighting.com with questions, comments or suggestions.
ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
323-582-3322 | Fax 323-832-9142 | support@elationlighting.com
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
+31 45 546 85 63 | Fax +31 45 546 85 96 | support@elationlighting.eu
REPLACEMENT PARTS please visit parts.elationlighting.com
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
LIMITED WARRANTY
A.
Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products
to be free of manufacturing defects in material and workmanship for a period of two years (730
days), and Elation Professional® p r o d u c t rechargeable b a t t e r i e s to be free of manufacturing
d e f e c t s in material and workmanship for a period of six months (180 days), from the original date
of purchase. This warranty excludes discharge lamps and all product accessories. This warranty shall
be valid only if the product is purchased within the United States of America, including possessions
and territories. It is the owner’s responsibility to establish the date and place of purchase by
acceptable evidence, at the time service is sought.
B.
For warranty service, send the product only to the Elation Professional® factory. All shipping charges
must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of
this warranty, Elation Professional® will pay return shipping charges only to a designated point within the
United States. If any product is sent, it must be shipped in its original package and packaging material.
No accessories should be shipped with the product. If any accessories are shipped with the product,
Elation Professional® shall have no liability what so ever for loss and/or or damage to any such
accessories, nor for the safe return thereof.
C.
This warranty is void if the product serial number and/or labels are altered or removed; if the
product is modified in any manner which Elation Professional® concludes, after inspection, affects
the reliability of the product; if the product has been repaired or serviced by anyone other than the
Elation Professional® factory unless prior written authorization was issued to purchaser by Elation
Professional®; if the product is damaged because not properly maintained as set forth in the product
instructions, guidelines and/or user manual.
D.
This is not a service contract, and this warranty does not include any maintenance, cleaning
or periodic check-up. During t h e
periods
as s p e c i f i e d
above, Elation Professional® will
r e p l a c e defective parts at its expense, and will absorb all expenses for warranty service and
repair labor by reason of defects in material or workmanship. The sole responsibility of Elation
Professional® under this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of Elation Professional®. All products covered by this warranty
were manufactured after January 1, 1990, and bare identifying marks to that effect.
E.
Elation Professional® reserves the right to make changes in design and/or performance
improvements upon its products without any obligation to include these changes in any products
theretofore manufactured.
F.
No warranty, w h e t h e r expressed o r implied, is given or made with respect to any accessory
supplied with the products described above. Except to the extent prohibited by applicable law, all
implied warranties made by E l a t i o n Professional® in c o n n e c t i o n with t h i s p r o d u c t , including
warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above.
And no warranties, whether expressed or implied, including warranties of merchantability or fitness,
shall apply to this product after said periods have expired. The consumer’s a n d /or dealer’s sole
remedy s h a l l b e s u c h r e p a i r o r r e p l a c e m e n t
u n d e r n o circumstances
as i s e x p r e s s l y
provided
above; and
shall E l a t i o n P r o f e s s i o n a l ® be l i a b l e f o r a n y l o s s a n d /or
d a m a g e , d i r e c t a n d /or consequential, arising out of the use of, and/or the inability to use, this
product.
G.
This warranty is the only written warranty applicable to Elation Professional® products and
supersedes all prior warranties and written descriptions of warranty terms and conditions therefore
published. SIXPAR 200™ User Manual Ver.
www.elationlighting.com
SAFETY INSTRUCTIONS
The SIXPAR
200™
is an extremely
sophisticated
piece
of electronic
equipment. To guarantee a smooth operation, it is important to follow the
guidelines in this manual. The manufacturer of this device will not accept
responsibility for damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
This device falls under PROTECTION CLASS 1. It’s essential this device be
grounded properly. Only qualified personnel should perform all electrical
connections.
C
A
U
T
I
O
N
S
UNPLUG POWER BEFORE SERVICING FIXTURE
NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT
NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE
SENSITIVE PERSONS MAY SUFFER AN EPILETIC SHOCK
RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET UV
RADIATION! FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF
ULTRAVIOLET UV LIGHT FROM THE UV LED. WEAR PROPER EYE
AND SKIN PROTECTION. AVOID PROLONGED PERIODS O F
EXPOSURE
TO
UV
L E D . AVOID W E A R I N G
WHITE
COLOR CLOTHING AND/OR USING UV PAINTS ON SKIN.
AVOID DIRECT EYE AND/OR SKIN EXPOSURE AT DISTANCES
LESS THAN 11 FEET (3.3m). DO NOT OPERATE FIXTURE WITH
DAMAGED/MISSING
EXTERNAL COVERS. DO
DIRECTLY INTO THE UV LIGHT AND/OR
NOT
LOOK
VIEW UV LIGHT
DIRECTLY WITH OPTICAL INSTRUMENTS THAT MAY CONCENTRATE THE LIGHT/RADIATION OUTPUT.
INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DIS-ORDERS, OR
INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE
ULTRAVIOLET UV LIGHT EMITTED FROM THE UV LED.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
IMPORTANT NOTICE!
There are no user serviceable parts inside this unit. Do not attempt any repairs
y o u r s e l f ; d o i n g s o w i l l v o i d y o u r m a n u f a c t u r e s w a r r a n t y . Damages
resulting from modifications to this fixture and/or the disregard of safety and general
user instructions found in this user manual void the manufactures warranty and are
not subject to any warranty claims and/or repairs.
For proper operation, follow the Installation guidelines described in this manual.
•
Only qualified and certified personnel should perform installation of this fixture
and only the original rigging parts (brackets) included with this fixture should be
used for installation. Any modifications will void the original manufactures
warranty and increase the risk of damage and/or personal injury.
Never look directly into the light source of this fixture to prevent risk of injury to
•
your retina, which may induce blindness. Those suffering from EP I L EP SY should
avoid looking directly into the light source of this unit at all times.
Always disconnect from main power source before performing any type of service
•
and/or cleaning procedure. Only handle the power cord by the plug end,
never pull out the plug by tugging the wire portion of the cord.
Do not operate this fixture if the power cord has become frayed, crimped
•
and/or damaged. If the power cord is damaged, replace it immediately with a
new one of similar power rating.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
GENERAL GUIDELINES
N E V E R
O P E N
T H I S
F I X T U R E
W H I L E
I N
U S E !
During the initial operation of this fixture, a light smoke or smell may emit from the
•
interior of the fixture. This is a normal process and is caused by excess paint in the
interior of the casing burning off from the heat associated with the lamp and will
decrease gradually over time.
This fixture is a professional lighting effect designed for INDOOR / DRY LOCATIONS
•
ONLY on stage, in nightclubs, theatres, etc.
Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while
•
operating, to prevent any fire hazard.
•
Minimum distance of inflammable materials from the surface 1.6 feet (0.5m).
•
DO NOT attempt installation and/or operation without knowledge how to do so.
•
DO NOT allow operation by persons who are not qualified to operate this type of
fixture. Most damages are the result of operations by nonprofessionals.
Consistent operational breaks may ensure the fixture will function properly for
•
many years to come.
•
DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
•
Always install the fixture with an appropriate safety cable. When installing the
fixture in a suspended environment, always use mounting hardware that is no less
than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw
holes in the bracket of the fixture.
•
Use the original packaging and materials to transport the fixture in for service.
•
DO NOT TOUCH the housing bare-hand during its operation. Turn OFF the power
and allow approximately 15 minutes for the fixture to cool down before replacing or
serving.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
FIXTURE OVERVIEW
1.
powerCON IN
2.
Fuse
3.
MODE Button
4.
UP Button
5.
DOWN Button
6.
ENTER Button
7.
powerCON OUT
8.
LCD Menu Display
9.
3pin DMX IN
10.
3pin DMX OUT
11.
5pin DMX IN
12.
5pin DMX OUT
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
FIXTURE INSTALLATION
FLAMMABLE
MATERIAL WARNING
Keep fixture at least 5.0 ft (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L
C O N N E C T I O N S
A qualified electrician should be used for all
electrical connections and/or installations.
CAUTIONS
•
For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
•
Min/Max ambient operating temperature for this fixture is 5°F to 113°F (-15°C to 45°C).
•
Do not use the fixture under or above this temperature.
•
Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture. 110 lbs / 49 kg)
•
Fixture installation must always be secured with a secondary safety
attachment, such as an appropriate safety cable.
•
Never stand directly below the device when mounting, removing or servicing.
POWER LINKING
Max number of units that can be power linked is 8 units @110V and 18 units
@240V.
CLAMP MOUNTING
The SIXPAR 200™ provides a unique integrated Dual Yoke / Floor Stand. When
mounting this fixture to truss be sure to secure an appropriately rated clamp
using an M10 screw fitted through the center hole of the Dual Yoke / Floor Stand.
SECURING
Regardless of the rigging option you choose for your SIXPAR 200™ always be sure to
secure your fixture with a safety cable. The fixture provides a built-in rigging point for a
safety cable on the hanging bracket as illustrated above. Be sure to only use the
designated rigging point for the safety cable and never secure a safety cable to a
carrying handle. SIXPAR 200™ User Manual Ver.
www.elationlighting.com
MOUNTING POINTS
•
Overhead mounting requires extensive experience, including amongst others
calculating working load limits, installation material being used, and periodic
safety inspection of all installation material and the device. If you lack these
qualifications, do not attempt the installation yourself. Improper installation can
result in bodily injury.
•
Fixture is fully operational in the specific mounting positions as illustrated below.
SAFETY
CABLE
Always use a Safety Cable whenever installing this fixture in a suspended
environment to ensure the fixture will not drop if the clamp fails.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
UNDERSTANDING DMX
DMX-512
DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and
controller manufactures as a form of communication between intelligent fixtures
and controllers. DMX allows all makes and models of different manufactures to be
linked together and operate from a single controller. This is possible as long as all the
fixtures and the controller are DMX compliant. A DMX controller sends the DMX data
instructions to the fixture allowing the user to control the different aspects of an
intelligent light. DMX data is sent out as serial data that travels from fixture to fixture
via data “IN” and data “OUT” XLR terminals located on the fixtures (most controllers
will only have output jacks).
DMX LINKING
To ensure proper DMX data transmission, always use proper DMX cables and a
terminator. When using several DMX fixtures try to use the shortest cable path
possible. Never split a DMX line with a “Y” style connector. The order in which the
fixtures are connected in a DMX line does not influence the DMX addressing. For
example; a fixture assigned a starting DMX address of 1 may be placed anywhere in
the DMX chain, at the beginning, at the end, or anywhere in the middle. The DMX
controller knows to send data assigned to address 1 to that fixture no matter where
it is located in the DMX chain. The SIXPAR 200™ can be controlled via DMX-512
protocol and the DMX address is set via the control menu.
DATA CABLE (DMX Cable) REQUIREMENTS (For DMX and Master/Slave Operation)
Your fixture and your DMX controller require a standard 3pin or 5pin XLR connector
for data input and data output (see figure below). Also, remember that a DMX line
must be daisy chained and cannot be split.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
DMX-512 CONTROLLER CONNECTION
Connect the provided XLR cable to the female XLR output of your controller and the
other side to the male XLR input of the SIXPAR 200™. The diagram below illustrates a
typical DMX-512 connection when the fixture is in the 12 Channel Mode. You can
chain multiple panels together through serial linking. . Always be sure daisy chain
your In and out data connections, never split or “Y” your DMX connections.
DMX-512 CONNECTION WITH DMX TERMINATOR
A DMX terminator should be used in all DMX lines especially in longer runs. The use of
a terminator may avoid erratic behavior in your DMX line. A terminator is a 120
ohm, 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR
connector (DATA + and DATA -). This fixture is inserted in the female XLR connector
of the last fixture in your daisy chain to terminate the line. Using a line terminator will
decrease the possibilities of erratic behavior. Use the SIXPAR™ DMX Terminator End
Cap listed in the OPTIONAL ACCESSORIES section at the end of this manual.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
DMX ADDRESSING
All fixtures should be given a DMX starting address when using a DMX controller, so
the correct fixture responds to the correct control signal. This digital starting address
is the channel number from which the fixture starts to “listen” to the digital control
information sent out from the DMX controller. The allocation of this starting DMX
address is achieved by setting the correct DMX address on the digital display
located on the back of the fixture.
You can set the same starting address for all fixtures or a group of fixtures, or set
different address for each individual fixture. Be advised that setting all fixtures to the
same DMX address will subsequently control all fixtures in the same fashion, in other
words, changing the settings of one channel will affect all the fixtures simultaneously.
If you set each fixture to a different DMX address, each unit will start to “listen” to the
channel number you have set, based on the quantity of control channels (DMX
channels) of each fixture. That means changing the settings of one channel will only
affect the selected fixture.
In the case of the SIXPAR 200™, when in the 12 Channel Mode you should set the
starting DMX address of the first unit to 1, the second unit to 13 (1 + 12), the third unit
to 25 (13 + 12), and so on.
Note: During start-up the SIXPAR 200™ will automatically detect whether a DMX data
signal is being received or not. If the fixture is not receiving a DMX signal please
check the following:
-
The 3pin or 5pin XLR input plug (cable with DMX signal from controller) is not
connected or is not inserted completely into the DMX input jack of the fixture.
-
The DMX controller is switched off or defective.
-
The DMX cable or connector is defective.
-
A DMX terminator has been inserted into the last fixture in your DMX chain.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
FIXTURE MENU
ON-BOARD SYSTEM MENU
The SIXPAR 200™ comes with an easy to navigate system menu.
will cover how to access each menu function.
The next sections
LCD CONTROL PANEL DISPLAY
The (4) button control panel (see image below) located on back of the fixture
allows you to access the main menu and make all necessary adjustments to the
SIXPAR 200™.
During normal operation, pressing the MODE button will navigate through the
different function menus. Once you reach a desired menu, press the ENTER button
to select that menu. The variable field that can be adjusted within the selected
menu will begin to flash. Using the UP or DOWN buttons, adjust the field until the
desired value is displayed. For example, the CHANNEL CH: menu variable field can
be set to 06, 07, 08, or 12. Pressing the ENTER button once will confirm your selected
value. Exit at any time without making any adjustments by pressing the MODE
button.
INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered ON, the display shows the following information:
Update
Wait...
SIXPAR
200
200
V1.15
Fixture Software Version
(Greater than or equal to)
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
LCD CONTROL PANEL LOCKOUT
When AutoLock menu is set to ON, the LCD backlight will turn OFF after 30 seconds
and the Control Panel will lock and the display will show LOCKED*****.
Press and hold the MODE button for 5 seconds to unlock.
When AutoLock menu is set to ON1, the LCD backlight will turn OFF after 30 seconds
and the Control Panel will lock and the display will show LOCKED*****.
To unlock the Control Panel, follow these steps:
1. When locked, the display will show: LOCKED*****
2. Press UP, then the display will change to: LOCKED**** (one * disappears)
3. Press DOWN, then the display will change to: LOCKED*** (two * disappear)
4. Press UP, then the display will change to: LOCKED** (three * disappear)
5. Press DOWN, then the display will change to: LOCKED* (4 * disappear)
6. Press ENTER, then the display will change to LOCKED and then become unlocked. ELATION© SIXPAR 200™
SYSTEM MENU
MENU
CHANNEL
CH: 06, 07, 08, 12
DMX Channel Mode
DMX MODE
SLAVE MODE
ADDR: 001 ~ 512
SALVE MODE
DMX Address Setting
Set Fixture A Slave Unit
ON
OFF
OFF1
1.MANUAL
R00-99
G00-99
B00-99
W00-99
A00-99
U00-99
S00-99
2.CHANGE
LCD Display Always ON
LCD Display OFF after 30 seconds
LCD Display OFF After 30 Seconds and LOCKED
Manual Color Adjustment
Adjust RED Brightness (00-99)
Adjust GREEN Brightness (00-99)
Adjust BLUE Brightness (00-99)
Adjust WHITE Brightness (00-99)
Adjust AMBER Brightness (00-99)
Adjust UV Brightness (00-99)
Adjust STROBE SPEED 00 SLOW (0.1Hz) - 99 FAST
(20Hz)
30 Color Chase Macro
SP01-99
S00-99
3.CHANG6
SP01-99
S00-99
4.FADE
SP01-99
S00-99
Standard, Stage, TV, Architec, Theatre
Blackout
Hold
Fade
Adjust SPEED 01 SLOW - 99 FAST
Adjust STROBE SPEED 00 SLOW (0.1Hz) - 99 FAST
6(20Hz)
Color Chase Macro
Adjust SPEED 01 SLOW - 99 FAST
Adjust STROBE SPEED 00 SLOW (0.1Hz) - 99 FAST
(20Hz)
Color Fade Macro
Adjust SPEED 01 SLOW - 99 FAST
Adjust STROBE SPEED 00 SLOW (0.1Hz) - 99 FAST
(20Hz)
Set Dimming Curve
NO Output
Hold Last Setting
Fade
Display ON
Internal
Programs
DimCurve
Specifications are subject to change without any prior written notice.
OPTIONS / VALUES
DESCRIPTION
NO DMX
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
DIMMING CURVES
The DimCurve menu allows you to select one of the following preset dimming curves:
Standard, Stage, TV, Architec, or Theatre. (See diagram below for more details)
Dimmer
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
DMX CHANNEL FUNCTIONS AND
VALUES
ELATION© SIXPAR 200™
DMX Channel Values / Functions (12 DMX Channels)
Specifications are subject to change without any prior written notice.
MODE / CHANNEL
6 CH
1
2
3
4
5
6
7 CH
1
2
3
4
5
6
7
8 CH
2
3
4
5
6
7
1
VALUE
1
2
3
4
5
6
7
12 CH
8
RED
0-255
Red (0-100%)
GREEN
0-255
Green (0-100%)
BLUE
0-255
Blue (0-100%)
WHITE
0-255
White (0-100%)
AMBER
0-255
Amber (0-100%)
U. V.
0-255
U. V. (0-100%)
MASTER DIMMER
0-255
Dimmer (0-100%)
STROBE
8
FUNCTION
0-31
LED OFF (NO STROBE)
32-95
Strobe Effect SLOW to FAST
96-127
LED ON (NO STROBE)
128-159
Strobe Pulse Effect In Sequences SLOW to FAST
160-191
LED ON (NO STROBE)
192-223
Random Strobe Effect SLOW to FAST
224-255
LED ON (NO STROBE)
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
ELATION© SIXPAR 200™
DMX Channel Values / Functions (12 DMX Channels)
Specifications are subject to change without any prior written notice.
MODE / CHANNEL
7 CH
8 CH
6 CH
VALUE
12 CH
9
FUNCTION
COLOR MACROS
0-3
OFF
4-7
RED
8-11
GREEN
12-15
BLUE
16-19
WHITE
20-23
AMBER
24-27
UV
28-31
RED + GREEN
32-35
RED + BLUE
36-39
RED + WHITE
40-43
RED + AMBER
44-47
RED + UV
48-51
GREEN + BLUE
52-55
GREEN + WHITE
56-59
GREEN + AMBER
60-63
GREEN + UV
64-67
BLUE + WHITE
68-71
BLUE + AMBER
72-75
BLUE + UV
76-79
WHITE + AMBER
80-83
WHITE + UV
84-87
AMBER + UV
88-91
RED + GREEN + BLUE
92-95
RED + GREEN + WHITE
96-99
RED + GREEN + AMBER
100-103
RED + GREEN + UV
104-107
RED + BLUE + WHITE
108-111
RED + BLUE + AMBER
112-115
RED + BLUE + UV
116-119
RED + WHITE + AMBER
120-123
RED + WHITE + UV
124-127
RED + AMBER + UV
128-131
GREEN + BLUE + WHITE
132-135
GREEN + BLUE + AMBER
136-139
GREEN + BLUE + UV
140-143
GREEN + WHITE + AMBER
144-147
GREEN + WHITE + UV
148-151
GREEN + AMBER + UV
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
ELATION© SIXPAR 200™
DMX Channel Values / Functions (12 DMX Channels)
Specifications are subject to change without any prior written notice.
MODE / CHANNEL
6 CH
7 CH
8 CH
10
11
COLOR MACROS (continued)
152-155
BLUE + WHITE + AMBER
156-159
BLUE + WHITE + UV
160-163
BLUE + AMBER + UV
164-167
WHITE + AMBER + UV
168-171
RED + GREEN + BLUE + WHITE
172-175
RED + GREEN + BLUE + AMBER
176-179
RED + GREEN + BLUE + UV
180-183
RED + GREEN +WHITE + AMBER
184-187
RED + GREEN + WHITE + UV
188-191
RED + GREEN + AMBER + UV
192-195
RED + BLUE + WHITE + AMBER
196-199
RED + BLUE + WHITE + UV
200-203
RED + BLUE + AMBER + UV
204-207
RED + WHITE + AMBER + UV
208-211
GREEN + BLUE + WHITE + AMBER
212-215
GREEN + BLUE + WHITE + UV
216-219
GREEN + BLUE + AMBER + UV
220-223
GREEN + WHITE + AMBER + UV
224-227
BLUE + WHITE + AMBER + UV
228-231
RED + GREEN + BLUE + WHITE + AMBER
232-235
RED + GREEN + BLUE + WHITE + UV
236-239
RED + GREEN + BLUE + AMBER + UV
240-243
RED + GREEN + WHITE + AMBER + UV
244-247
RED + BLUE + WHITE + AMBER + UV
248-251
GREEN +BLUE + WHITE + AMBER + UV
252-255
RED + GREEN + BLUE + WHITE + AMBER + UV
COLOR CHASE MACROS
00-20
NO Function
21-40
30 Color Chase
41-60
6 Color Chase
61-80
Color Fade Chase
81-255
NO Function
COLOR CHASE MACROS SPEED
00-255
12
FUNCTION
9
VALUE
12 CH
Chase Speed of CHANNEL 10 - SLOW to FAST
DIMMING MODES
0-20
STANDARD
21-40
STAGE
41-60
TV
61-80
ARCHITECTURAL
81-100
THEATER
101-255
NO Function
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
CLEANING AND MAINTENANCE
C
U
T
I
O
N
Disconnect power before cleaning or maintenance.
A
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output,
and an extended life. The frequency of cleaning depends on the environment in
which the fixture operates: damp, smoky or particularly dirty environments can
cause greater accumulation of dirt on the fixture’s optics.
• Clean the external lens surface at least every 20 days with a soft cloth to avoid
dirt/debris accumulation. Never use alcohol, solvents, or ammonia based
cleaners.
MAINTENANCE
•
Regular inspections are recommended to insure proper function and extended
life. There are no user serviceable parts inside this fixture, please refer all other
service issues to an authorized Elation service technician. Should you need any
spare parts, please order genuine parts from your local Elation dealer.
•
Please refer to the following points during routine inspections:
• A detailed electric check by an approved electrical engineer every 3 months, to
make sure the circuit contacts are in good condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all times. Lose screws
may fall out during normal operation resulting in damage or injury.
• Check for any deformations on the housing, color lenses, rigging hardware and
rigging points (ceiling, suspension, trussing). Deformations in the housing could
allow for dust to enter into the fixture. Damaged rigging points or unsecured
rigging could cause the fixture to fall and seriously injure a person(s).
• Inspect all moving parts and make sure there are no signs of wear and
rotate/move without imbalances.
• Electric power supply cables must not show any damage, material fatigue or
sediments. Never remove the ground prong from the power cable.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
TECHNICAL SPECIFICATIONS
FEATURES
15° Beam 25° Field Angles
5 Variable Dimming Curve Modes
Dual Yoke / Floor Stand
Multiple Unit Power Linking
RDM - Remote Device Management
Rugged Die-Cast Aluminum Exterior
Flicker Free Operation for TV and FILM
SOURCE
(12) 12W 6-in-1 RGBAW+UV LEDs
100,000-Hour Average LED Life
EFFECTS
Electronic Strobe
Color and Chase Macros
Electronic Dimming: 0% - 100%
5 Variable Dimming Curve Modes
CONTROL / CONNECTIONS
(4) DMX Channel Modes (6 / 7 / 8 / 12)
(4) Button Touch Control Panel
LCD Menu Display
3pin & 5pin DMX and powerCON In/Out
SIZE / WEIGHT
Length: 12.1” (313mm)
Width: 4.9” (125mm)
Vertical Height: 11.8” (300mm)
Weight: 11.0 lbs. (4.9 kg)
ELECTRICAL / THERMAL
AC 110-250V - 50/60Hz
150W Max Power Consumption
Power Linking: 8pcs @110V / 18pcs @240V
5°F to 113°F (-15°C to 45°C)
APPROVALS / RATINGS
CE | IP20
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
PHOTOMETRIC DATA
DIMENSIONAL DRAWINGS
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
SIXPAR 200™ User Manual Ver.
www.elationlighting.com
OPTIONAL ACCESSORIES
ORDER CODE
ITEM
TRIGGER CLAMP
Heavy Duty Wrap Around Hook Style Clamp
SIXPAR200/GFH
Gel Frame and Holder Kit
SIXPAR/BD200
Barn Door (Gel Frame Holder Kit Required - Not Included)
LSF536
Light Shaping Filter 30° 20" x 24" Sheet
LSF537
Light Shaping Filter 20° 20" x 22" Sheet
LSF538
Light Shaping Filter 60° x 1° 20" x 24" Sheet
LSF559
Light Shaping Filter 10° 20" x 24" Sheet
EWDMXSYSTEM
Wireless DMX System (1 Transmitter, 1 Receiver)
EWDMXT
Wireless DMX Transmitter
EWDMXR
Wireless DMX Receiver
PLC3
3' (1m) powerCON PRO Link Cable
PLC6
6' (1.8m) powerCON PRO Link Cable
AC3PDMX5PRO
5 ft. (1.5m) 3pin PRO DMX Cable
AC5PDMX5PRO
5 ft. (1.5m) 5pin PRO DMX Cable
Additional Cable Lengths Available
SIXPAR 200™ User Manual Ver.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement