Schumacher SPI10 10A 12V Automatic Battery Charger Owner Manual

Schumacher SPI10 10A 12V Automatic Battery Charger Owner Manual
MODEL
SPI10
Automatic Battery Charger
OWNERS MANUAL
PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE
EACH USE. This manual will explain how to use the battery charger
safely and effectively. Please read and follow these instructions
and precautions carefully.
0099002043-00
CONTENTS
MARKINGS AND SYMBOLS................................................................................................. 3
IMPORTANT SAFETY INSTRUCTIONS............................................................................... 4
PERSONAL PRECAUTIONS................................................................................................ 5
PREPARING TO CHARGE................................................................................................... 5
CHARGER LOCATION.......................................................................................................... 6
DC CONNECTION PRECAUTIONS..................................................................................... 6
FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN THE VEHICLE................... 6
FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE OF THE VEHICLE..................... 7
GROUNDING AND AC POWER CORD CONNECTIONS.................................................... 7
ASSEMBLY INSTRUCTIONS................................................................................................ 7
FEATURES............................................................................................................................ 8
CONTROL PANEL................................................................................................................. 8
OPERATING INSTRUCTIONS.............................................................................................. 8
DISPLAY MESSAGES......................................................................................................... 10
MAINTENANCE INSTRUCTIONS...................................................................................... 12
MOVING AND STORAGE INSTRUCTIONS....................................................................... 12
DISPOSAL INFORMATION................................................................................................. 12
TROUBLESHOOTING........................................................................................................ 13
SPECIFICATIONS............................................................................................................... 13
REPLACEMENT PARTS..................................................................................................... 13
LIMITED WARRANTY......................................................................................................... 14
DECLARATION OF CONFORMITY.................................................................................... 15
Markings and symbols
Read manual
before using.
Warning
Contact the equipment
supplier for details on
how to properly dispose
of this product within
a specific country, per
WEEE requirements.
Caution,
risk of electric
shock.
Do not
expose
to rain.
Use in a
well-ventilated
area.
For indoor Class II
use only. Charger
Keep away from
sparks and flame –
battery could emit
explosive gases.
Plug type
PLUG M
94065092M
WARNING READ THE ENTIRE MANUAL BEFORE USING THIS PRODUCT.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.
IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.
SAVE THESE INSTRUCTIONS – This manual will show you how to use your charger safely
and effectively. Please read, understand and follow these instructions and precautions
carefully, as this manual contains important safety and operating instructions. The safety
messages used throughout this manual contain a signal word, a message and an icon.
The signal word indicates the level of the hazard in a situation.
Indicates an imminently hazardous situation which, if not avoided, will result in
DANGER death or serious injury to the operator or bystanders.
WARNING Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury to the operator or bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result in
CAUTION moderate or minor injury to the operator or bystanders.
IMPORTANT Indicates a potentially hazardous situation which, if not avoided, could result in
damage to the equipment or vehicle or property damage.
•3•
1.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS.
This manual contains important safety and operating instructions.
WARNING
WARNING RISK OF ELECTRIC SHOCK OR FIRE.
1.1 Read the entire manual before using this product. Failure to do
so could result in serious injury or death.
1.2 Children should be supervised to ensure that they do not play
with the appliance. This appliance can be used by children aged
from 8 years and above and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
1.3 This charger is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the charger by a person responsible
for their safety. Children should be supervised to ensure they do not play with the charger.
1.4 Do not expose the charger to rain or snow.
1.5 Use only recommended attachments. Use of an attachment not recommended or sold by
Schumacher® Electric Corporation may result in a risk of fire, electric shock or injury to
persons or damage to property.
1.6 To reduce the risk of damage to the electric plug or cord, pull by the plug rather than the
cord when disconnecting the charger.
1.7 An extension cord should not be used unless absolutely necessary. Use of an improper
extension cord could result in a risk of fire and electric shock. If an extension cord must be
used, make sure:
• That the pins on the plug of the extension cord are the same number, size and shape as
those of the plug on the charger.
• That the extension cord is properly wired and in good electrical condition.
• That the wire size is large enough for the AC ampere rating of the charger as specified in
section 8.
1.8 To reduce the risk of electric shock, unplug the charger from the outlet before attempting
any maintenance or cleaning. Simply turning off the controls will not reduce this risk.
1.9 Do not operate the charger with a damaged cord or plug. If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
1.10 Do not operate the charger if it has received a sharp blow, been dropped or otherwise
damaged in any way; take it to a qualified service person.
1.11 Do not disassemble the charger; take it to a qualified service person when service or repair
is required. Incorrect reassembly may result in a risk of fire or electric shock.
WARNING RISK OF EXPLOSIVE GASES.
1.12 WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS.
BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY
OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU
FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.
1.13 To reduce the risk of a battery explosion, follow these instructions and those published by the
battery manufacturer and the manufacturer of any equipment you intend to use in the vicinity of
the battery. Review the cautionary markings on these products and on the engine.
1.14 This charger employs parts, such as switches and circuit breakers, that tend to produce arcs
and sparks. If used in a garage, locate this charger 18 inches (46 cm) or more above floor level.
1.15 This charger has an earth connection for functional purposes only.
WARNING Do not use with non-rechargeable batteries.
Use only with lead-acid rechargeable batteries.
Do not start the vehicle with the charger connected to the AC outlet, or it
IMPORTANT may damage the charger and your vehicle.
•4•
2.
PERSONAL PRECAUTIONS
WARNING RISK OF EXPLOSIVE GASES.
2.1 NEVER smoke or allow a spark or flame in the vicinity of a battery or engine.
2.2 Remove personal metal items such as rings, bracelets, necklaces and
watches when working with a lead-acid or lithium ion battery. These batteries can
produce a short-circuit current high enough to weld a ring or the like to metal,
causing a severe burn.
2.3 Be extra cautious, to reduce the risk of dropping a metal tool onto the battery. It might
spark or short-circuit the battery or other electrical part that may cause an explosion.
2.4 Use this charger for charging only 12V lead-acid, calcium, gel and AGM-type rechargeable
batteries with rated capacities of 10-230Ah. It is not intended to supply power to a low voltage
electrical system other than in a starter-motor application. Do not use this battery charger for
charging dry-cell batteries that are commonly used with home appliances or lithium ion batteries
used in cell phones, laptops, power tools, etc. These batteries may burst and cause injury to
persons and damage to property.
2.5 NEVER charge a frozen battery.
2.6 Consider having someone nearby to come to your aid when you work near a lead-acid battery.
2.7 Have plenty of fresh water and soap nearby, in case battery acid contacts your skin,
clothing or eyes.
2.8 Wear complete eye and body protection, including safety goggles and protective clothing.
Avoid touching your eyes while working near the battery.
2.9 If battery acid contacts your skin or clothing, immediately wash the area with soap and
water. If acid enters your eye, immediately flood the eye with cold running water for at least
10 minutes and get medical attention right away.
2.10 If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT
induce vomiting. Seek medical attention immediately.
3.
PREPARING TO CHARGE
WARNING
3.2
3.3
3.4
3.5
3.6
3.7
WARNING RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID IS A
HIGHLY CORROSIVE SULFURIC ACID.
3.1 If it is necessary to remove the battery from the vehicle to
charge it, always remove the grounded terminal first. Make sure all
of the accessories in the vehicle are off, to prevent arcing.
Be sure the area around the battery is well ventilated while the battery is being charged.
Clean the battery terminals before charging the battery. During cleaning, keep airborne
corrosion from coming into contact with your eyes, nose and mouth. Use baking soda and
water to neutralize the battery acid and help eliminate airborne corrosion. Do not touch
your eyes, nose or mouth.
Add distilled water to each cell until the battery acid reaches the level specified by the
battery manufacturer. Do not overfill. For a battery without removable cell caps, such as
valve regulated lead acid batteries (VRLA), carefully follow the manufacturer’s recharging
instructions.
Read, understand and follow all instructions for the charger, battery, vehicle and any
equipment used near the battery and charger. Study all of the battery manufacturer’s
specific precautions while charging and recommended rates of charge.
Determine the voltage of the battery by referring to the vehicle owner’s manual and make
sure that the output voltage selector switch is set to the correct voltage. If the charger has
an adjustable charge rate, charge the battery in the lowest rate first.
Make sure that the charger cable clips make tight connections.
•5•
4.
CHARGER LOCATION
WARNING
WARNING
WARNING RISK OF EXPLOSION AND CONTACT WITH
BATTERY ACID.
4.1 Locate the charger as far away from the battery as
the DC cables permit.
4.2 Never place the charger directly above the battery
being charged; gases from the battery will corrode and damage the charger.
4.3 Do not set the battery on top of the charger.
4.4 Never allow battery acid to drip onto the charger when reading the electrolyte specific
gravity or filling the battery.
4.5 Do not operate the charger in a closed-in area or restrict the ventilation in any way.
5.
DC CONNECTION PRECAUTIONS
5.1 Connect and disconnect the DC output connectors only after removing the AC plug from
the electrical outlet. Never allow the connectors to touch each other.
5.2 Attach the connectors to the battery and chassis, as indicated in sections 6 and 7.
6.
FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN THE VEHICLE.
WARNING
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
WARNING
WARNING A SPARK NEAR THE BATTERY MAY CAUSE A
BATTERY EXPLOSION. TO REDUCE THE RISK OF
A SPARK NEAR THE BATTERY:
Do not start the vehicle with the charger
IMPORTANT connected to the AC outlet, or it may
damage the charger and your vehicle.
Position the AC and DC cables to reduce the risk of damage by the hood, door and moving
or hot engine parts. NOTE: If it is necessary to close the hood during the charging process,
ensure that the hood does not touch the metal part of the battery connectors or cut the
insulation of the cables.
Stay clear of fan blades, belts, pulleys and other parts that can cause injury.
Check the polarity of the battery posts. The POSITIVE (POS, P, +) battery post usually has a
larger diameter than the NEGATIVE (NEG, N, -) post.
Determine which post of the battery is grounded (connected) to the chassis. The battery
terminal not connected to the chassis has to be connected first. The other connection is to
be made to the chassis, remote from the battery and fuel line. See steps 6.5 and 6.6. The
battery charger is then to be connected to the supply mains. The connection to the supply
mains is to be in accordance with the national wiring rules.
For a negative-grounded vehicle, connect the POSITIVE (RED) connector from the
battery charger to the POSITIVE (POS, P, +) ungrounded post of the battery. Connect
the NEGATIVE (BLACK) connector to the vehicle chassis or engine block away from the
battery. Do not connect the connector to the carburetor, fuel lines or sheet-metal body
parts. Connect to a heavy gauge metal part of the frame or engine block.
For a positive-grounded vehicle, connect the NEGATIVE (BLACK) connector from the
battery charger to the NEGATIVE (NEG, N, -) ungrounded post of the battery. Connect the
POSITIVE (RED) connector to the vehicle chassis or engine block away from the battery.
Do not connect the connector to the carburetor, fuel lines or sheet-metal body parts.
Connect to a heavy gauge metal part of the frame or engine block.
Connect charger AC supply cord to electrical outlet.
After charging, disconnect the battery charger from the supply mains. Then remove the chassis
connection and then the battery connection.
See Operating Instructions for length of charge information.
•6•
7.
FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE OF THE VEHICLE.
WARNING
7.2
7.3
7.4
7.5
7.6
7.7
7.8
8.
WARNING
WARNING A SPARK NEAR THE BATTERY MAY CAUSE A
BATTERY EXPLOSION. TO REDUCE THE RISK OF
A SPARK NEAR THE BATTERY:
7.1 Check the polarity of the battery posts. The
POSITIVE (POS, P, +) battery post usually has a larger
diameter than the NEGATIVE (NEG, N, -) post.
Attach at least a 24-inch (61 cm) long 7 AWG (10 mm2) insulated battery cable to the
NEGATIVE (NEG, N, -) battery post.
Connect the POSITIVE (RED) charger connector to the POSITIVE (POS, P, +) post of the
battery.
Position yourself and the free end of the cable you previously attached to the NEGATIVE
(NEG, N, -) battery post as far away from the battery as possible – then connect the
NEGATIVE (BLACK) charger connector to the free end of the cable.
Do not face the battery when making the final connection.
Connect charger AC supply cord to electrical outlet.
When disconnecting the charger, always do so in the reverse order of the connecting
procedure and break the first connection while as far away from the battery as practical.
A marine (boat) battery must be removed and charged on shore. To charge it onboard
requires equipment specially designed for marine use.
GROUNDING AND AC POWER CORD CONNECTIONS
WARNING
WARNING RISK OF ELECTRIC SHOCK OR FIRE.
8.1 This battery charger is for use on a nominal 230V, 50Hz circuit.
The plug must be plugged into an outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
The plug pins must fit the receptacle (outlet). Do not use with an
ungrounded system.
DANGER Never alter the AC cord or plug provided – if it does not fit the outlet, have a
proper outlet installed by a qualified electrician. An improper connection can result in a risk
of an electric shock or electrocution.
8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension cord,
follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as those of
plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger.
Recommended minimum AWG size for extension cord:
• 100 feet (30.5 meters) long or less – use an 18 gauge (1.0 mm2) extension cord.
• Over 100 feet (30.5 meters) long – use a 16 gauge (1.25 mm2) extension cord.
8.2
9.
ASSEMBLY INSTRUCTIONS
9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.
•7•
10. FEATURES
3
2
4
1.
2.
3.
4.
5.
6.
7.
1
6
7
Digital display
Hook attachment
Language button
Charging status LED indicator
Battery clamp quick-connect
Ring terminal quick-connect
AC Power cord
5
11. CONTROL PANEL
DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See Display Messages
for a complete list of messages.
LANGUAGE BUTTON
The digital display will show the battery’s voltage and percentage of charge. Press the button
for 5 seconds to select the language on the display. (EN→ DE→ FR→ NL→ ES→ IT).
LED INDICATOR
GREEN LED solid (CHARGING): The charger is connected and is charging a battery.
GREEN LED pulsing (CHARGED/MAINTAINING): The battery is fully charged and the
charger is in Maintain Mode.
GREEN LED flashing: The charge has aborted. (See Aborted Charge section.)
NOTE: See Operating Instructions for a complete description of the charger modes.
12. OPERATING INSTRUCTIONS
This battery charger must be properly assembled in accordance with the
WARNING assembly instructions before it is used.
The charger does not have an ON/OFF switch. The On and Off commands are controlled by
plugging the SPI10 into an AC electrical wall outlet only after the battery connections have
been made.
Do not start the vehicle with the charger connected to the AC outlet, or it
IMPORTANT may damage the charger and your vehicle.
BATTERY INFORMATION
This charger can charge 6-celled lead-acid batteries with rated capacities of 10-230 Ah.
NOTE: This charger is equipped with an auto-start feature. Current will not be supplied
to the battery clamps until a battery is properly connected. The clamps will not spark if
touched together.
See instructions for charging a battery inside a vehicle (Section 6) or outside of the
vehicle (Section 7).
•8•
USING THE QUICK-CONNECT CABLE CONNECTORS
Connect any of the output cable assemblies to the charger in seconds.
IMPORTANT Never connect the clip and ring terminal connectors together for use in other
applications, such as external battery or other power source charging, or to
extend the output cable length, as reverse polarity and/or overcharge conditions will occur.
BATTERY CLAMP QUICK-CONNECT
1. Connect the end of the charger output cable to the end of the battery clamp quick-connect.
2. Follow the steps in sections 6 and 7 to connect the clamps to the battery.
3. After a good electrical connection is made to the battery, plug the power cord into an AC
electrical wall outlet. Make sure to place the charger on a dry, non-flammable surface.
4. When the charger starts, the GREEN LED will be solid, and the display will show
ANALYZING BATTERY while the charger determines that the battery is properly
connected and the condition of the battery.
5. When the battery is fully charged, the GREEN LED will pulse.
6. When charging is complete, disconnect the AC cord from the supply mains, remove the
clamp from the vehicle’s chassis, and then remove the clamp from the battery terminal.
RING TERMINAL QUICK-CONNECT
The ring connectors permanently attach to the battery, providing easy access to quickly
charge your battery. This application is appropriate for motorcycles, lawn tractors, ATVs
and snowmobiles.
1. To permanently attach to a battery, loosen and remove each nut from the bolts at the
battery terminals.
2. Connect the red positive connector ring to the positive (POS, P, +) battery terminal.
3. Connect the negative connector ring to the negative (NEG, N, -) battery terminal.
4. Replace and tighten the nuts to secure them.
5. Connect the ring connector cable assembly to the charger. Take care to keep both wires
and plug away from hot and moving parts.
6. Plug the charger power cord into an AC electrical wall outlet. Make sure to place the
charger on a dry, non-flammable surface.
7. When the charger starts, the GREEN LED will be solid, and the display will show
ANALYZING BATTERY while the charger determines that the battery is properly
connected and the condition of the battery.
8. When the battery is fully charged, the GREEN LED will pulse.
9. When charging is complete, disconnect the AC cord from the supply mains, remove the
negative connector, and finally the positive connector.
BATTERY CONNECTION INDICATOR
If the charger does not detect a properly connected battery, charging will not start and the digital
display will show one of two messages. If the display shows CONNECT CLAMPS, make sure
the charger is connected to the battery and the connection points are clean and making a good
connection. If the display shows WARNING CLAMPS REVERSED, unplug the charger from the
AC outlet, reverse the connections at the battery, and then plug the charger back in.
BATTERY CHARGING TIMES
CCA = Cold Cranking Amps
Ah = Amp Hour
BATTERY SIZE/RATING
SMALL BATTERIES
Motorcycle, garden tractor, etc.
200-315 CCA
CARS AND
315-550 CCA
TRUCKS
550-1200 CCA
MARINE/DEEP-CYCLE
10-20 Ah
20-32 Ah
40-60 Ah
60-85 Ah
85-230 Ah
80 Ah
140 Ah
160 Ah
200 Ah
CHARGE TIME (10A)
½-1 h
1½-2½ h
2½-3½ h
3½-4½ h
5-8½ h
5h
7½ h
8½ h
10 h
Times are based on a 50% discharged battery and may change, depending on age and condition of battery.
•9•
AUTOMATIC CHARGING MODE
When an Automatic Charge is performed, the charger switches to the Maintain Mode
automatically after the battery is charged. For a battery with a starting voltage under 1 volt,
use a manual charger to pre-charge the battery for five minutes, to get additional voltage
into the battery.
ABORTED CHARGE
If charging cannot be completed normally, charging will abort. When charging aborts, the
charger’s output is shut off, the GREEN LED will flash, and the display will show CHARGE
ABORTED-BAD BATTERY. Do not continue attempting to charge this battery. Check the
battery and replace, if necessary.
CHARGE COMPLETION AND MAINTAIN MODE (FLOAT MODE MONITORING)
Charge completion is indicated by the pulsing GREEN LED and the digital display showing
FULLY CHARGED-AUTO MAINTAINING. This indicates the charger has switched to
the Maintain Mode of operation. In this mode, the charger keeps the battery fully charged
by delivering a small current when necessary. NOTE: If the charger has to provide its
maximum maintain current for a continuous 12 hour period, it will go into Abort Mode (see
Aborted Charge section). This is usually caused by a drain on the battery, or the battery
could be bad. Make sure there are no loads on the battery. If there are, remove them. If
there are none, have the battery checked or replaced.
MAINTAINING A BATTERY
The SPI10 maintains 12 volt batteries, keeping them at full charge. It is not recommended
for industrial applications.
NOTE: The maintain mode technology allows you to safely charge and maintain a healthy
battery for extended periods of time. However, problems with the battery, electrical
problems in the vehicle, improper connections or other unanticipated conditions could
cause excessive current draws. As such, occasionally monitoring your battery and the
charging process is recommended.
FAN
Your charger is equipped with a fan. It is normal for the fan to run while the charger is charging.
Keep the area near the charger free of obstructions, to allow the fan to operate efficiently.
13. DISPLAY MESSAGES
CONNECT CLAMPS (No LED lit) – Plugged into the AC outlet without the clamps
connected to a battery.
WARNING-CLAMPS REVERSED (No LED lit) – Plugged into the AC outlet and the
clamps are connected backwards to a battery.
ANALYZING BATTERY (Green LED lit) – Plugged into the AC outlet, and when first
correctly connected to battery.
CHARGING – xx% (Green LED lit) – Plugged into the AC outlet and correctly connected to
a discharged battery.
FULLY CHARGED-AUTO MAINTAINING (Green LED pulsing) – Plugged into the AC
outlet and correctly connected to a fully charged battery.
CHARGE ABORTED-BAD BATTERY (Green LED flashing) –
Circumstances that could cause an Abort situation during charging:
• The battery is severely sulfated or has a shorted cell and can’t reach a full charge.
• The battery is too large or there is a bank of batteries and it doesn’t reach full charge within
a set time period.
Circumstances that could cause an Abort situation during maintain:
• The battery is severely sulfated or has a weak cell and will not hold a charge.
• There is a large draw on the battery and the charger has to supply its maximum maintain
current for a 12 hour period to keep the battery at full charge.
BATTERY DISCONNECTED (No LED lit) – After charging has begun, the charger has lost
its connection to the battery.
• 10 •
NOTE: To change the language on the display, press and hold the Language button
for 5 seconds. (EN→ DE→ FR→ NL→ ES→ IT).
GERMAN (DE)
KLEMMEN VERBINDEN
WARNUNG - KLEMMEN VERKEHRT VERBUNDEN
BATTERIE WIRD ANALYSIERT
LADUNG BEI - XX%
VOLLGELADEN - AUTOM. ERHALTUNGSLADUNG
LADUNG ABGEBROCHEN - BATTERIE DEFEKT
BATTERIE NICHT VERBUNDEN
FRENCH (FR)
CONNECTER LES PINCES
ATTENTION-PINCES INVERSEES
ANALYSE DE LA BATTERIE
CHARGE - XX%
CHARGEE-MODE MAINTIEN DE CHARGE
CHARGE ARRETEE-BATTERIE DEFFECTUEUSE
BATTERIE NON CONNECTEE
SPANISH (ES)
CONECTAR LAS PINZAS
ATENCIÓN - PINZAS INVERSAS
ANALIZANDO BATERÍA
CARGA - XX%
CARGA COMPLETA - MANTENIMIENTO AUTOMATICO
CARGA ABORTADA - BATERÍA DEFECTUOSA
BATERÍA DESCONECTADA
DUTCH (NL)
KLEMMEN AANSLUITEN
OPGELET - INVERSIE KLEMMEN
BATTERIJ ANALYSE
LADING - XX%
VOLLEDIG GELADEN - AUTOMATISCH ONDERHOUD
LADING GESTOPT - SLECHTE BATTERIJ
BATTERIJ LOSGEKOPPELD
• 11 •
ITALIAN (IT)
COLLEGARE MORSETTI
AVVISO - MORSETTI INVERTITI
ANALISI BATTERIA
IN CARICA - XX%
CARICA COMPLETATA - AUTO MANTENIMENTO
CARICA INTERROTTA - BATTERIA NON IN BUONO STATO
BATTERIA SCOLLEGATA
14. MAINTENANCE INSTRUCTIONS
14.1 Cleaning and user maintenance should not be done by children without supervision.
14.2 After use and before performing maintenance, unplug and disconnect the battery charger
(see sections 6, 7 and 8).
14.3 Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery
connectors, cords, and the charger case.
14.4 Ensure that all of the charger components are in place and in good working condition, for
example, the plastic boots on the battery clips.
14.5 Servicing does not require opening the unit, as there are no user-serviceable parts.
14.6 All other servicing should be performed by qualified service personnel.
14.7 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons, in order to avoid a hazard.
15. MOVING AND STORAGE INSTRUCTIONS
15.1 Store the charger unplugged, in an upright position. The cord will still conduct electricity
until it is unplugged from the outlet.
15.2 Store inside, in a cool, dry place.
15.3 Do not store the connectors clipped together, on or around metal, or clipped to cables.
15.4 If the charger is moved around the shop or transported to another location, take care to
avoid/prevent damage to the cords, connectors and charger. Failure to do so could result
in personal injury or property damage.
16. DISPOSAL INFORMATION
Do not dispose of this product with other household waste. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, and
to promote the sustainable reuse of material resources, recycle it responsibly. To
discard your used device, please use the return and collection systems or contact
the retailer where the product was purchased, for environmentally-safe recycling.
• 12 •
17. TROUBLESHOOTING
PROBLEM
Battery connectors do not
spark when touched together.
The charger will not turn on
when properly connected.
I cannot select a language on
the display.
Green LED is lit and the
display shows ANALYZING
BATTERY.
Green LED is flashing and
the display shows CHARGE
ABORTED-BAD BATTERY.
The display shows CONNECT
CLAMPS.
POSSIBLE CAUSE
The charger is equipped with an
auto-start feature. It will not supply
current to the battery connectors until
a battery is properly connected. The
connectors will not spark if touched
together.
AC outlet is dead.
REASON/SOLUTION
No problem; this is a normal
condition.
Poor electrical connection.
Check power cord and extension
cord for loose fitting plug.
No problem; this is normal.
Press the button for 5 seconds to
select a language:
(EN→ DE→ FR→ NL→ ES→ IT).
The charger needs to check the
condition of the battery.
The battery is too large for the
charger.
Check for open fuse or circuit breaker
supplying AC outlet.
The green LED will be lit when the
charger is checking the condition of
the battery. This is normal.
You need a charger with a higher amp
rate.
The battery voltage is still below 10V
after 2 hours of charging.
The clamps are not making a good
connection.
Have the battery checked.
The fuse is bad.
Replace the in-line fuse for the ring
connector.
Check for poor connection at battery
and frame.
18. SPECIFICATIONS
Input................................................................................................... 230V AC~50Hz, 2.0A
Output................................................................................................................ 12V
10A
Ingress Protection rating...............................................................................................IP20
19. REPLACEMENT PARTS
Battery clamps (quick-connect)..................................................................... 3899003431Z
Ring connectors (quick-connect) .................................................................. 3899003531Z
• 13 •
20. LIMITED WARRANTY
WARRANTY TERMS AND CONDITIONS
Schumacher Electric Corporation (the “Manufacturer”) or the resellers authorized by
the Manufacturer (the “Reseller”) warrant this Charger (the “Product”) for two (2) years,
according to the following stipulations. Any and all warranties, other than the warranty
included herein, are hereby expressly disclaimed and excluded to the fullest extent
permissible under applicable law. Legislation may imply warranties or conditions or
impose obligations on Manufacturer which cannot be excluded, restricted or modified in
relation to consumer goods.
Consumer End-User Warranty
Any claims under this warranty must be communicated to Reseller within 2 months after
discovery of the non-conformity.
Resellers/Professional End-User Warranty
The Manufacturer provides a limited warranty for hidden defects or non-conformities.
This warranty is subject to the following conditions:
a. The Manufacturer only warrants hidden defects in material or workmanship present
in their root cause at the moment of the first sale by the Manufacturer;
b. Manufacturer’s obligation under this warranty is limited to repairing or replacing the
Product with a new or reconditioned unit at the sole option of the Manufacturer;
c. Manufacturer does not have any warranty obligations if the alleged defects were caused
by abnormal usage, fair wear and tear, unauthorized use of the Product or use of the
Product differing from the description in the applicable manual or other specifications
given by the Manufacturer, insufficient care, repairs carried out by persons or entities or
with parts not approved by Manufacturer, poor care, accidents, unauthorized changes
or modifications, incorrect transport, storage or treatment of the Product;
d. In order to exercise this right, the Product must be returned complete and in its original
state and packaging, with mail costs prepaid, along with proof of purchase to the
Manufacturer or its authorized representatives in order for repair or replacement to occur.
Common Warranty Provisions
The warranty mentioned above only applies to the first professional or consumer user
having legally acquired the Product from the Manufacturer or a Reseller. No warranty is
extended towards clients, agents or representatives of those buyers.
The Product is sold under the specifications, for the use and purpose in accordance with
the provisions of this manual, with express exclusion and disclaimer of warranty of any
other specifications, uses and purposes.
Authorized Resellers are prohibited from making any statements or providing any warranty
in excess of the above warranties Non-authorized resellers may only sell the product
under the condition that they assume all warranty obligations with the total exclusion of
any warranty provided by the Manufacturer.
Manufacturer does not provide any warranty for any accessories used with the Product
that are not manufactured by Schumacher Electric Corporation.
This warranty does not exclude or diminish any claims the Manufacturer may have against
the distributors of The Product.
THE MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES ANYONE TO
ASSUME OR MAKE ANY OTHER OBLIGATION TOWARDS THE PRODUCT OTHER
THAN THIS WARRANTY.
• 14 •
Warranty, Repair Service and Distribution:
Probe Corporation
245 Albert Amon Street,
Meadowdale, Germiston,
Republic of South Africa
E-Mail: probe@probegroup.co.za
Telephone: +27 (0) 11 453 0924
Fax: +27 (s0) 11 453 2141
Schumacher® and the Schumacher logo
are registered trademarks of Schumacher Electric Corporation.
DECLARATION OF CONFORMITY
We,
Schumacher Electric Corporation
801 East Business Center Drive
Mount Prospect, Illinois, 60056, U.S.A.
certify that the Automatic Battery Charger Model SPI10 complies with the following standards:
Low Voltage Directive (LVD): 2014/35/EU
EMC Directive:
2014/30/EU
EN 60335-1:2012+A11:2014+A13:2017
EN 60335-2-29:2004+A2:2010
EN 62233:2008
and therefore conforms with the protection requirements relating to safety and electromagnetic
compatibility.
The year in which the CE marking was affixed is “2015”.
Manufacturer:
Cory Watkins, President
September 15, 2015
Hereby declares that the equipment Model SPI10 is compliant to the DIRECTIVE 2011/65/EU OF
THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 (RoHS) on the restriction
of the use of certain hazardous substances in electrical and electronic equipment while:
The parts do not exceed the maximum concentrations of 0.1% by weight in homogenous
materials for lead, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and
polybrominated diphenyl ethers (PBDE), and 0.01% for cadmium, as required in Commission
Decision 2005/618/EC of 18 August 2005.
September 15, 2015
President, Schumacher Electric Corporation – U.S.A.
• 15 •
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement