Magnavox MSH318 Interactive Amazon Alexa Voice Activated Digital Clock Owner's manual

Magnavox MSH318 Interactive Amazon Alexa Voice Activated Digital Clock Owner's manual
ALEXA CLOCK RADIO
VOICE ACTIVATED
OWNER'S MANUAL
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
MODEL: MSH318
Size: 148.5(W) x 210(H)mm (A5)
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
R EMOVE COVER (OR BACK). NO USER-SERVICEABLE PART S
I NSIDE . R EFER SERVICING T O Q UALIFIED S ERVICE PERSONNEL.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product`s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
FCC NOTICE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if no t installed and use d i n accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance(servicing) instructions in the
literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
FCC WARNING:
To assure continued compliance, follow the attached
installation instructions and use only shielded cables
when connecting to other devices. Modifications not
authorized by the manufacturer may void user`s authority
to operate this device.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
2
IMPORTANT SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions carefully. Please note that these
are general precautions and may not pertain to your unit.
For example, this unit may not have the capability to be connected to an outdoor antenna.
1) Read these instructions.
All the safety and operating instructions should be read before the product is operated.
2) Keep these instructions.
The safety and operating instructions should be retained for future reference.
3) Heed all warnings.
All warnings on the product and in the operating instructions should be adhered to.
4) Follow all instructions.
All operating and use instructions should be followed.
5) Do not use this apparatus near water.
Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen
sink or laundry tub; in a wet basement; or near a swimming pool.
6) Clean only with dry cloth.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure
reliable operation of the product and to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should never be placed near or over a radiator or heat
source. This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
An appliance and cart combination should be moved with care.
Quick stop, excessive force and uneven surfaces may cause the
appliance and cart combination to overturn.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
To protect your product from a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture does not operate normally, or has been dropped.
15) Power source
This product should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your appliance dealer or local
power company. For products intended to operate from battery power, or other source, refer to the
operation instructions.
16) Power lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
3
IMPORTANT SAFETY INSTRUCTIONS
17) Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock.
18) Object and liquid entry
Never push objects of any kind into the product through openings as they may touch dangerous
voltage points or short out parts that could result in fire or electric shock. Never spill or spray any
type of liquid on the product.
19) Outdoor antenna grounding
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to
Provide some protection against voltage surges and built up static charges. Section 810 of the
National Electric Code ANSI/NFPA 70 provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product,
size of grounding conductors, location of antenna-discharge product, connection to grounding
electrodes and requirements for the grounding electrodes.
20)Service
Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21)Replacement parts
When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire or electric shock or other hazards.
22)Safety check
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
2 3 )Damage requiring service
Unplug this product from the wall outlet and refer service to qualified service personnel under the
following conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as an adjustment of other
controls may result in damage and will require extensive work by a qualified technician
to restore the product to its normal operation.
e) If the product has been dropped or the cabinet has been damaged.
f)
When the product exhibits a distinct change in performance-this indicates a need for service.
2 4)Note to CATV system installer
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable
entry as practical.
NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damage d
i n any way such as the following: the power-supply cord or plug has been damaged, liquid has been
s pilled into unit, the unit has been exposed to rain or moisture, the unit has been dropped o r the unit does
n ot operate normally.
4
Location of Controls
TOP VIEW:
1
2
3
4
15
WPS
SOURCE
VOLUME
SLEEP FM SCAN
5 6
SNOOZE DIMMER
7 8 9 10 11
12 13
REAR VIEW:
DC
DC IN
5V, 2A
ANT
1A charge only
16
17
5
Line in
18 19
14
4
Location of Controls
FRONT VIEW:
20
BOTTOM VIEW:
21
1. LED Indicator Bar
2. SOURCE Button
Press repeatedly to select the playback source
3.
Microphone Button
Press to active the Alexa Microphone
4. Built-in Microphones
6
Location of Controls
5. SLEEP Button
In power on mode, press repeatedly to activate and set the sleep timer.
6. FM SCAN Button
In first time use (or relocated the Clock to a new location), press to search and store the
available FM stations.
7.
Microphone Off Button
Press and hold to turn off the microphone., press and hold again to turn it on.
8. WPS
(WPS, Play/Pause) Button
 In Wifi connecting mode, press and hold to enter to the Wifi set up mode.
 In Wifi connected mode, press and hold to disconnect Wifi network.
 In audio playback mode, press to pause. Press again to resume to normal playback.
9.
(Power On/Off) Button
Press and hold to turn on the Clock from standby mode, press and hold again to back to
standby mode.
10.
(Previous) Button
In Radio mode, press to play the previously stored Radio station.
 In music playback mode, press repeatedly to skip to previous tracks.

11.
(Next) Button


In Radio mode, press to play the next stored Radio station.
In music playback mode, press repeatedly to skip to next tracks.
12. SNOOZE Button
When alarm goes off:
 Press to activate the snooze function, the alarm will turn back on automatically nine (9)
minutes later. This feature can be repeatedly until the Alarm is shut off.
 Or, press and hold approximately 1 second to shut off the Alarm.
13. DIMMER Button
Press repeatedly to adjust the brightness level of the display as desired.
14. - (Volume Down) Button
Press repeatedly to reduce the volume level as desired.
15. + (Volume Up) Button
Press repeatedly to rise the volume level as desired.
16. DC IN Jack
17.
USB Port
To recharging the external USB Device.
18. Line in Jack
19. ANT (FM Wire Antenna)
20. Display
21. Button Cell Compartment
7
Button Cell Installation (For Clock Back Up)
If there is AC power failure, this electronic clock is designed to continue operating internally
(without showing the time on the Clock Display) with a CR2032 button cell (included). Install it
(or replace it when it is drained) as follows:
1. Loosen the screw on the Button Cell Compartment with a Philips screwdriver (not included) as
Fig. 1 below.
2. Press the tab on the door then lift it off.
3. Install (or replace) the button cell as Fig. 2 below according to the polarity diagram inside the
Button Cell Compartment.
4. Close the door and tighten the screw on it as Fig. 3 shows below.
Fig.1
Fig.2
Fig.3
CR2032
LITHIUM BATTERY
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
3V
BATTERY PRECAUTIONS:
Follow these Battery Precaution when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries
with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of
time, remove the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer’s instructions.)
6. Do not dispose of battery in fire. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
8.
This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burn in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
8
WiFi Setup
To synchronize the correct time to your Clock you must connect your device to the same
Wifi network with the “Magnavox Alexa” app following the instructions below.
Note: All Devices must connect to the same 2.4G Wi-Fi Network.
Preparation:
1. Create and register an Amazon user account:
(If you already have an Amazon account, you can skip this step. But, please make sure
that you set in the same time zone your clock is located.)

Download the “Amazon Alexa” app from the Apps Store into your mobile device
then install it following the on screen instructions from your mobile device.

During installation, you should register the time zone's region your clock will
display. Otherwise, the actual time shown on the clock may be incorrect.
<
<
Alexa Devices
United States
MSH318
Edit name
Alaska Daylight Time
Anchorage
Central Daylight Time
Chicago
Eastern Daylight Time
New York
.
.
.
Off
Device Location
Device Time Zone
Pacific Daylight Time(Los Angeleses)
Follow-Up Mode
Off
Measurement Units
Fahrenheit,Miles
XXXX
Change
TIME ZONES
GENERAL
Do Not Disturb
Registered To
Device Time Zone
Deregister
About
Pacific Daylight Time
Los Angeles
2.
Download; install and register the “MAGNAVOX Alexa Player” app from the Google
Play or Apple Apps Store into your mobile device following the on screen instructions
from your mobile device.
9
Wifi Connection:
1. Make sure the time zone setting on your mobile device is same as your Amazon account.
Otherwise, the time showing on the Clock may differ to your Amazon time.
2. Connect your mobile device to your 2.4G Wifi network.
3. Connect the unit to AC power as below:
 Connect the small plug from the AC/DC adaptor to the DC IN Jack on the rear of
the Clock.

Connect the AC/DC adaptor to wall outlet having AC 100-240V~, 50/60Hz.
AC/DC Adapter
To AC outlet
DC
DC IN
5V, 2A
ANT
1A charge only
Line in
To the DC IN jack
on the rear of the unit
4. Press and hold the “ ” Power Button until the display is illuminated . Time “12:00”
will appear on the display and blink. You will also hear an audible prompt say
“Power on; Wi-Fi mode”. The Wifi icon “
” will appear on the display and blink.
5. Wait approximately 30 seconds (Or press and hold the“WPS ” Button) until you hear
an audible prompt say “Entering set up mode; follow the instruction on the app to
finish set up”.
10
6. Open the APP “MAGNAVOX Alexa Player” in your mobile device. Then it will start to
scan and search the available devices automatically. Read the on screen instructions and
touch the " Add Device " Button on the screen to continue.
Searching for MAGNAVOX
Wireless Hi-Fi System..
Please make sure your device is
powered up.
Your phone is connected to XXXX,
please make sure your device is
connected to the same network.
Add Device
Experiencing any problems? Give us your feedback>>
7. The following Fig.A will appear. Touch the “V” Button on the screen. The devices list will
appear. Touch the “MSH318” on it. The follows Fig. B will appear. Touch the “Connect
Speaker” Button on the screen to continue.
ADD DEVICE
ADD DEVICE
Please select your device
Please select your device
>
MSH318
>
MSH315V
WPS
SOURCE
VOLUME
SLEEP FM SCAN
Connect Speaker
SNOOZE DIMMER
Connect Speaker
Fig. A
Fig. B
11
NOTE:
If the connection is failure and the follows
screen appear. Press and hold the “WPS
Button approximately 5 seconds to restart
the setting procedures.
8. The follows screen will appear. Touch the
“Settings” Button on it to enter to Wifi
setting menu.
SETUP
SETUP
<
Press and hold the WPS button on your
speaker for 5 seconds to put into setup mode.
Go to your Phone's Wi-Fi settings
and select the Wi-Fi starting with
MSH318_XXXX to connect.
Wi-Fi
MSH318_XXXX
WPS
SOURCE
VOLUME
SLEEP FM SCAN
SNOOZE DIMMER
Then, come back to this App.
Could not find MSH318_XXXX?
Settings
Continue
9. Find our Model number “MSH318_XXX”
(XXX is the identify number of the existing
Clock) in the available Wifi devices list on
your mobile device then touch it to enter.
10. Touch the “RETURN” Button on the
mobile device's screen to return to
previous setting page. Wait a few
seconds, the Wifi network list will appear.
Select and touch the button of your 2.4G
Wifi network. Then touch the “Continue”
Button to continue.
Notes: The Wifi network you selected
must same as the 2.4G network
your mobile device using.
Password of the network may
need enter if set.
<
Settings
Wi-Fi
SELECT NETWORK
Choose the network you want the device to
use. MAGNAVOX only supports 2.4G
networks.
Wi-Fi
MSH318_XXXX
i
XXXX
ABC123
CHOOSE A NETWORK...
ABC-XXX
ABCDEF
i
ABC-XXX
i
12345
Password
Other...
Please enter Wi-Fi password
Continue
12
”
NOTE:
If the connection is failure, the following screen
will appear. Touch the “Try Again” Button on it
to restart the settings follows the on screen
instructions.
11. Wait a few seconds, the follows screen
will appear. Touch the "Next" Button on
it to continue.
CONNECTED
CONNECT FAIL
1.Your Phone is connected to wireless
network xxxxx_XXXX and your speaker is
connected to XXXXX. Please go to your
Phone's WiFi Settings and connect to
XXXX.
2.Failed to setup your speaker. Please retry
if you entered the password incorectly.
Check help for alternate setup method for
WiFi setup.
Current Wi-Fi strength of device:100%
Help
Try Again
Next
Cancel Setup
13. The follows screen will appear, touch
the"Sign in with Amazon" Button on
it to continue.
12. The follows screen will appear, touch
the “>” Button on it to continue.
NAME DEVICE
>
Custom...
MSH318_XXXX
Your device includes acess to Alexa.
Connect your Amazon account to
access personalized features.
Bathroom
Bed Room
Alexa allows you to use your voice to play music
and get news, sports scores, weather and moreall hands-free.
All you have to do is ask Alexa.
Den
Dining Room
Family Room
Foyer
Sign in with Amazon
Garage
Cancel
Garden
13
14. The follows screen will appear, sign in
your Amazon account follows the on
screen instructions.
<
15. If you do not have an Amazon account, then
touch“Create a new Amazon account” Button
to start registration and create a new Amazon
account follows the on screen instructions.
<
AMAZON LOGIN
Sign in
AMAZON LOGIN
Create account
Forgot password?
Name
Email (phone for mobile accounts)
Your email address
Amazon password
Create a password
Show password
Show password
Keep me signed in. Details
Sign in
Create your Amazon account
New to Amazon?
Create a new Amazon account
By create an account, you agree to the terms
and conditions below.
16. When sign in, the following screen appear, 17. The following screen will appear, select
and set the region you are, then touch
touch the “Allow” Button on it to continue.
“Next” Button to continue.
<
<
AMAZON LOGIN
MSH318 would like access
to:
AMAZON LOGIN
Select your country or
Region
This way, Alexa will give you more
Alexa Voice Service
accurate responses.
Alexa processes and retains audio, interactions,
and other data in the cloud to provide and improve
our services.
United States
Allow
Next
Cancel
14
<
Alexa allows purchasing by voice using your
default payment and shipping settings. You can
require a speakable confirmation code, turn off
voice purchaing, and see product and order
details in your Alexa App or on alexa.amazon.com.
Learn more.
By tapping"Allow", you agree to Amazon's
Conidtions of Use and All terms found here.
18. The following screen will appear, touch the 19. The following screen will appear, touch
the “Next” Button on it.
button of the desired language.
Please choose your prefered
language for Alexa.
Alexa is ready
English (United States)
Here are some of the many things
you can ask Alexa.
English (United Kingdom)
Alexa, what's the weather?
Deutsch
Alexa, play my Flash Briefing.
Alexa, what are some top-rated
Indian restaurants?
Alexa, set a timer for 20 mins.
You can change the language later in
"Amazon Alexa Settings".
Next
20. The following screen will appear. Then you 21. The following screen will appear, touch
can turn off the Alexa Microphone following
the “I got it” Button to complete the
the on screen instructions or touch the “Next” settings.
Button to skip this setting then go to next step.
<
DEVICE LIST
Bedroom
You Belong with Me.
R
Bedroom
L
How to switch between solo and multi mode?
We value your privacy, so you can
disable your microphone as shown in
the image above.
To learn more and acess additional
features, download the Amazon Alexa
App.
I got it!
Next
Pause All
22. Once the set up is finished, press and hold the “ ” Power Button to turn the Clock to
standby mode. You will hear an audible prompt say “Power off”.
15
Operation
Alexa:
1. After the Clock was connected to Wifi network and sign in to Amazon as
” Power Button approximately 1
instructed earlier. Press and hold the “
second to turn on the clock from standby mode. Icon “ ” will appear on the
display and you will hear an audible prompt say “Power on; Wi-Fi mode”.
2. Wait approximately 30 seconds until the clock is automatically connected to
your Wi-fi network and Amazon, you will hear an audible prompt say
“Connected to your Wifi network”.
3. Say “Alexa” to the microphone or press the “ ” Microphone Button, the
Indicator Bar will illuminate. Ask your questions or instructions to the
microphone then wait for a reply from Alexa . For example, You can ask:





(Alexa) Who are you?
(Alexa) What's the time now?
(Alexa) What's the news today?
(Alexa) Play a song.
(Alexa) Stop (or Pause) the song.
4. When finished, press and hold the “ ” Power Button to turn the unit to
standby mode. You will hear an audible prompt say “Power off”.
ALARM:
Alarm set:
1. In Wifi connection mode, say “Alexa” to the microphone or press the “ ”
Microphone Button, the Indicator Bar will illuminate. Then, ask Alexa to:


2.
(Alexa) Set an alarm.
Alexa will reply: Alarm for what time?
(Alexa) Eight AM.
Alexa will reply: Alarm set for eight AM.
When alarm is set and activated, the indicator “alarm1” will appear on the
display.
16
3.
More than one alarm can be set, repeated the same procedures until all
alarms are set.
IMPORTANT:
When using the Alexa alarm clock (or timer), make sure the Clock is in
power on mode and connected to the Wifi network and Amazon
continually. Otherwise, the alarm will not function.
Snooze:
When alarm goes off, press the SNOOZE Button, the Indicator Bar will
illuminate and blink. The alarm will turn back on automatically nine (9)
minutes later. This feature can be repeatedly until the Alarm is turned off.
Shut off alarm:
When alarm goes off, press and hold the SNOOZE Button to shut off alarm.
The indicator “alarm1” will disappear on the display.
Cancel alarm:
In Wifi connection mode, say “Alexa” to the microphone or press the “ ”
Microphone Button, the Indicator Bar will illuminate. Then, ask Alexa to:
 (Alexa) Cancel alarm.
 Alexa will reply: XX alarm cancel.
 If more than one alarm time was set, cancel it following her instructions.
RADIO:
1.
Press and hold the “ ” Power Button approximately 1 second to turn on
the clock from standby mode. Indicator “ ” will appear on the display and
you will hear an audible prompt say “Power on; Wi-Fi mode”.
2.
Press the “Source” Button repeatedly until the indicator “radio” appears
on the display.
3.
In first time use (or relocated the Clock to a new location), search and
store the available FM stations by pressing the “FM SCAN” Button. The
Clock will automatically search and store all available FM radio stations
then play the first stored FM station.
17
4.
Press the
or
(Back or Forward) buttons repeatedly to select and play
the desired stored radio station.
5.
Press the VOLUME +/- buttons to adjust volume level as desired.
6.
When finished, press and hold the “ ” Power Button to turn the unit to
standby mode. You will hear an audible prompt say “Power off”.
Antennas :
The FM Wire Antenna on the rear of unit is for FM reception. If reception is weak,
unwind it to full length and/or reassemble the other direction/location to improve
reception.
AUX/LINE IN:
Listen music from the external Audio Player such as MP3 Player, Discman… ETC:
1.
In power off mode, connect one end of the Audio Connection Cable (not
included) to the AUX Out / Line Out / Phone Jack on the external Audio
Player.
2.
Connect the other end of the cable to the “Line in” Jack on the rear of the
Clock.
3.
In power on mode, press the “Source” Button repeatedly until the indicator
“line-in” appear on the display. You will also hear an audible prompt say
“Auxiliary Mode”.
4.
Play the music on the connected Player as usual. (Make sure the volume
level of the connected Audio Player is turned to high level.)
5.
Press the VOLUME +/- buttons to adjust volume level as desired.
6.
When finished, press and hold the “ ” Power Button to turn the unit to
standby mode. You will hear an audible prompt say “Power off”.
MUSIC PLAYBACK:
Stream and play music through the Clock from Amazon:
1.
Press and hold the “ ” Power Button approximately 1 second to turn on the
clock from standby mode. Icon “ ” will appear on the display and you will
hear an audible prompt say “Power on; Wi-Fi mode”.
2.
Wait approximately 30 seconds until the clock is automatically connected to
your Wi-fi network and Amazon, you will hear an audible prompt say
“Connected to your Wifi network”.
18
3.
Say “Alexa” to the microphone or press the “ ” Microphone Button, the
Indicator Bar will illuminate. Say your instructions to the microphone then
wait the reply from her.
4.
You can say:
(Alexa) Play the song.
5.
Then select and play the music following Alexa instructions.
You can also stream and play music through the Clock from your mobile
device on your Wifi network by using the “MAGNAVOX Alexa Player” app.
1.
Press and hold the “ ” Power Button approximately 1 second to turn on the
clock from standby mode. Icon “ ” will appear on the display and you will
hear an audible say “Power on; Wi-Fi mode”.
2.
Wait approximately 30 seconds until the clock is automatically connected to
your Wi-fi network and Amazon, you will hear an audible prompt say
“Connected to your Wifi network”.
3.
Open the “MAGNAVOX Alexa Player” app in your mobile device. Play
the music on your device or through other Music Store following the on
screen instructions.
BUILT-IN USB CHARGER:
The Clock has a built-in USB Charger, connect the external USB Device to
the USB Port on the rear of the Clock for recharging.
Using PROPER USB charging cable
(not included)
To USB Port on the rear of the Clock
To charging port of the external device
1A charge only
DIMMER:
Press the “DIMMER” Button repeatedly to adjust the brightness level of the
display as desired.
SLEEP TIMER:
Press the “SLEEP ”Button to activate the sleep function, sleep timer will appear
on the display. Press the button repeatedly to set the sleep timer to 10 – 90
minutes as desired. To turn off the sleep timer before the time is up, press and
hold the “ ” Power Button to turn the Clock to standby mode.
19
Cleaning
1. To prevent fire or shock hazard, disconnect your unit from the AC wall outlet
when cleaning.
2. The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
3. Mild soap and a damp cloth may be used.
Troubleshooting Guide
Check the following before requesting service:
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Can’t power on
The adapter is not plugged
Plug the adapter properly
No sound or
sound weak
Volume level in minimum position
Raise the volume level by pressing
the + Button on the top of Clock
Volume level of paired/connected device Raise the volume level of the
is in low level
connected device
Sound
distortion
Wi-Fi not
functioning
Volume level too high
Reduce the volume level by
pressing the - Button on the
top of Clock
Volume level of the connected
device too high
Reduce the volume level of the
connected device
The Clock had NOT add in the Wi-Fi
network and had NOT sign in Amazon
account
Add the Clock into the Wi-Fi
network and sign in Amazon
account as page 9-15
The Clock is in standby mode
Press and hold the " " Button to
turn on the Clock from standby
mode
The Clock and the mobile devices is not
in the same 2.4G Wi-Fi network
Set the Clock and the mobile
device in the same 2.4G
Wi-Fi network
Unwind the FM Wire Antenna to its
full length and/or reassemble the
other direction/location to improve
reception
FM weak
reception
Amazon Alexa
not functioning
The unit is not in the Amazon Alexa
operation mode
20
Power on the unit and
enter to Amazon Alexa
operate mode as page 16
General Specifications
Power Source:
DC
Wifi Type:
IEEE 802.11 b/g/n
Wi-Fi Operation Range:
up to 96 feet in open area
FM Radio Coverage:
87.5-108.0 MHz
Clock Back Up:
1 x CR2032 Button Cell
USB Charger Output:
DC
5V, 2A,
5V, 1A Max.
Accessories
1 x Owner's Manual
1 x AC/DC Adaptor (Input: AC 100-240V~;50/60 Hz, 0.5A Max
Output: DC
5V, 2A,
)
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE
WITHOUT NOTICE
21
LIMITED WARRANTY
Craig Electronics warrants this product to be free from manufacturing defects in material
and workmanship under normal use for a period of 180 days from date of purchase. If
service is required, please return the product to the store where it was purchased for
exchange; or, pack the unit in the original packing material with all accessories if
applicable, a copy of your sales receipt and a Cashier’s check or Money Order for $15 (to
cover shipping and handling costs) payable to Craig Electronics Inc. For consumers in
Canada, please make sure that the cashier check or money order is redeemable through
a U.S. bank. Ship your product freight pre-paid. Your unit will be repaired, replaced or if
the unit cannot be repaired or replaced, a refund will be forwarded to you within four
weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33269
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantability, are limited in duration to the period
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
This product has been manufactured by and is sold under the responsibility of Craig
Electronics Inc, and Craig Electronics Inc is the warrantor in relation to this product.
MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips
N.V. and are used under license from Koninklijke Philips N.V.
To Obtain Service on your Product
email: magnavox@craigelectronics.com
Printed in China
MSH318_WC_E0CL1_B0US
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement