Yealink Meeting Server V20.0.0.5 Installation guide

Yealink Meeting Server  V20.0.0.5 Installation guide
About This Guide
About This Guide
This guide introduces how to install the YMS software.
YMS installation method includes: stand-alone installation or cluster installation.
The differences between them are described as below:
Type
Stand-Alone
installation
Description
One stand-alone YMS but with all services.
Multiple YMSs, including the following node types:

Master node: it includes all the YMS services.

Sub-master node: if you want to realize the disaster
recovery for all features, it must contain 2 sub-master nodes.

Business node: you can destribute the desired service on
each business node according to the enterprise deployment
need. The services contain SIP service, MCU service and so
on.
Cluster installation
In This Guide
This guide contains the following chapters:
Chapter 1 Creating a Data Backup for YMS 1.X
Chapter 2 Uninstalling YMS 1.X
Chapter 3 YMS Stand-Alone Installation
Chapter 4 Expanding the Stand-Alone YMS
Chapter 5 Installing the Cluster YMS
Chapter 6 Uninstalling YMS 2.0
iii
Yealink Meeting Server Software Installation Guide
iv
Table of Contents
Table of Contents
About This Guide............................................................................ iii
In This Guide .................................................................................................................... iii
Table of Contents ........................................................................... iii
Creating a Data Backup for YMS 1.X ............................................ 1
Saving the Important Data by Screenshot ...........................................................1
Exporting All Call Statistics..........................................................................................2
Making a Backup for the System Data ...................................................................3
Uninstalling YMS 1.X ...................................................................... 5
YMS Stand-Alone Installation........................................................ 7
Installing the Stand-Alone YMS with the Existing CentOS ............................7
Installing YMS by Importing OVA/OVF Files .......................................................8
Expanding the Stand-Alone YMS ................................................ 13
Installing the Cluster YMS ............................................................ 15
Uninstalling YMS 2.0..................................................................... 19
iii
Yealink Meeting Server Software Installation Guide
iv
Creating a Data Backup for YMS 1.X
Creating a Data Backup for YMS 1.X
If you use YMS 1.X, you need make a data backup first. Because when you upgrade YMS 1.X to
YMS 2.0, you need uninstall YMS 1.X and the data on it will be deleted.
After the data backup, please contact Yealink to do the data migration.
Saving the Important Data by Screenshot
We recommend that you save the following configuration by screenshot:

Click System->Call Settings->Global settings, and take screenshots of all the
configuration.

Click System->Call Settings->Call routing, and take screenshots of all the configuration.
1
Yealink Meeting Server Software Installation Guide

Click System->Gateway Configuration->SIP trunk IVR, and take screenshots of all the
configuration.
Exporting All Call Statistics
Procedure:
1.
2
Click Statistics->Export.
Creating a Data Backup for YMS 1.X
Making a Backup for the System Data
Make sure there is no ongoing conferences before making the backup.
Procedure:
1.
Click System->System Maintenance->Backup/Restore->Create Backup.
2.
Click
on the right side of the created backup to download it to your computer.
3
Yealink Meeting Server Software Installation Guide
4
Uninstalling YMS 1.X
Uninstalling YMS 1.X
If you use YMS 1.X, you need uninstall it before installing YMS 2.0.
Procedure (log into CentOS as the root):
1.
Open Terminal.
2.
Run the command: apollo_util.sh uninstall 11055011 no
5
Yealink Meeting Server Software Installation Guide
6
YMS Stand-Alone Installation
YMS Stand-Alone Installation
You can select one of the following ways to install YMS:

Installing the Stand-Alone YMS with the Existing CentOS

Installing YMS by Importing OVA/OVF Files
Installing the Stand-Alone YMS with the Existing
CentOS
Before you begin:
If the installation environment cannot access the external network, we recommend that you use
CentOS 7.5 or later. If it can access the external network, the operating system can be CentOS
7.0 or later.
Procedure:
1.
Put the installation package in the path of /usr/local.
For example, put the installation package in the specific path by using SSH Secure File
Transfer Client.
2.
Use SecureCRT to log into CentOS via SSH and run the following command:
cd /usr/local
tar xvzf Apollo_20.0.0.1.tar.gz
cd apollo_install
7
Yealink Meeting Server Software Installation Guide
tar xvzf install.tar.gz
./install.sh
3.
Enter A to select stand-alone installation.
If you do not select within 30 seconds, the system will select the stand-alone installation
automatically. The installation will be finished in about 10 minutes. Please wait.
The installation succeeds if the page displays the following part:
Installing YMS by Importing OVA/OVF Files
Before you begin
You should check the following points:

If you want to install YMS to a virtual machine, the following types of virtual machine are
recommended:
Feature
Type

Description

VMware ESXi 6.5 or later

Microsoft Hyper-V Server 2012 or later
You can obtain the YMS setup file from the Yealink distributor or Yealink technical support
engineer, and the YMS setup file contains the OVF and VMDK file or OVA file.
8
YMS Stand-Alone Installation
Procedure:
1.
Log into the ESXi host.
2.
Click Host in the Navigator, and then select Create/Register VM to create a virtual
machine.
3.
Select Deploy a virtual machine from an OVF or OVA file.
4.
Click Next to continue.
9
Yealink Meeting Server Software Installation Guide
5.
Enter the name for the virtual machine, and then upload the OVF and VMDK file or OVA
file.
(Take the OVF and VMDK file as an example)
10
6.
Click Next to continue.
7.
Select the default destination datastore for the virtual machine configuration files and all
of the virtual disks.
YMS Stand-Alone Installation
8.
Click Next to continue.
9.
Select VM Network from the drop-down menu of VM Network, and then select Thin in
the Disk provisioning field.
10. Click Next to continue.
11. Click Finish.
11
Yealink Meeting Server Software Installation Guide
You can view the progress of uploading the files in the Recent tasks list.
After the files are uploaded successfully, the installation is completed.
12
Expanding the Stand-Alone YMS
Expanding the Stand-Alone YMS
For the stand-alone YMS, if you want to strengthen its MCU by making it become 1+N (N can
be 1.2.3.4.5.6…...) with one master node and N business nodes, you can expand your YMS.
Before you begin:

If the installation environment cannot access the external network, we recommend that
you use CentOS 7.5 or later. If it can access the external network, the operating system can
be CentOS 7.0 or later.

The network among all of the nodes can be accessed. We recommend that all of the
nodes can access the external network.

YMS is not installed in all the business nodes.
Procedure:
1.
Use SecureCRT to log into CentOS via SSH to run the following command:
vi /usr/local/apollo/data/install.conf
2.
Enter A to edit the configuration file.
For example, set 10.86.0.33 as the master node, and 10.86.0.55 as the business node.
3.
Press Esc to exit, and run the following command:
:wq
cd /usr/local/apollo_install
./install.sh
The installation succeeds if the page displays the following part:
13
Yealink Meeting Server Software Installation Guide
14
Installing the Cluster YMS
Installing the Cluster YMS
There are two plans for installing cluster YMS:
Plan A: 1+N(N can be 1.2.3.4.5.6…...), 1 master node and N business nodes. It does not have
the disaster recovery feature, but it has multiple business nodes, with good service capability
and low coupling.
Plan B: 3+N(N can be 1.2.3.4.5.6…...), 1 master node, 2 sub-master nodes, and N business
nodes. It has disaster recovery feature (multi-machine backup feature).
Note that, there is no 2+N plan, that is 1 master node, 1 sub-master node and N business
nodes. Because the sub-master node cannot be installed successfully, which makes it have the
same effect as the plan A.
Before you begin:

If the installation environment cannot access the external network, we recommend that
you use CentOS 7.5 or later. If it can access the external network, the operational system
can be CentOS 7.0 or later.

The network among all of the nodes can be accessed. We recommend that all of the
nodes can access the external network.

YMS is not installed in all the business nodes.
Procedure:
1.
Put the installation package in the path of /usr/local of the master node.
For example, put the installation package in the specific path by using SSH Secure File
Transfer Client.
2.
Use SecureCRT to log into CentOS via SSH and run the following command:
15
Yealink Meeting Server Software Installation Guide
cd /usr/local
tar xvzf Apollo_20.0.0.5.tar.gz
cd apollo_install
tar xvzf install.tar.gz
./install.sh
3.
Enter B to select the cluster installation.
4.
Run the command: vi /usr/local/apollo/data/install.conf
5.
Enter A to edit the configuration file.
For example, set 10.86.0.202 as the master node, set 10.86.0.203 and 10.86.0.204 as the
sub-master nodes, and set 10.86.0.208 as the business node.
16
Installing the Cluster YMS
6.
Press Esc to exit, and run the following command:
:wq
./install.sh
The installation succeeds if the page displays the following part:
17
Yealink Meeting Server Software Installation Guide
18
Uninstalling YMS 2.0
Uninstalling YMS 2.0
Procedure (log into CentOS as the root user):
1.
Open Terminal.
2.
Run the command: apollo-uninstall
For the cluster installation, you need run this command on each node.
3.
Enter the password which can be obtained from Yealink.
19
Yealink Meeting Server Software Installation Guide
Customer Feedback
We are striving to improve our documentation quality and we appreciate your feedback. Email
your opinions and comments to DocsFeedback@yealink.com.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product
documents, and more. For better service, we sincerely recommend you to use Yealink Ticketing
system (https://ticket.yealink.com) to submit all your technical issues.
20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement