CYP PUV-1620S-TX User manual

CYP PUV-1620S-TX User manual
PUV-1620S-TX
4K UHD HDMI / VGA to HDBaseT Transmitter Switcher/
Scaler, IR, Audio Embedding, RS-232, LAN, PoH
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
3
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE
SUMMARY OF CHANGE
v1.00
First release
4
20/06/2018
CONTENTS
1. Introduction�������������������������������������������6
2. Applications�������������������������������������������6
3. Package Contents����������������������������������6
4. System Requirements���������������������������7
5. Features��������������������������������������������������7
6. Operation Controls and Functions�������8
6.1 Front Panel��������������������������������������������������� 8
6.2 Rear Panel����������������������������������������������������� 9
6.3 IR Cable Pinouts���������������������������������������10
6.4 OSD Menu��������������������������������������������������10
7. Connection Diagram�������������������������� 18
8. Specifications�������������������������������������� 19
8.1 Technical Specifications������������������������19
8.2 Video Specifications�������������������������������20
8.3 Audio Specifications�������������������������������21
8.4 Cable Specifications�������������������������������22
8.5 HDBaseT Features������������������������������������22
9. Acronyms��������������������������������������������� 23
5
1. INTRODUCTION
This Transmitter is designed to scale and convert HDMI and PC video, with
optional analogue audio embedding, for extension over long distances
to standard HDBaseT Receivers. The HDMI input supports resolutions
up to [email protected] and the VGA input supports resolutions up to 1080p60/
WUXGA (RB). The scaled HDBaseT output supports resolutions from
640×[email protected] up to [email protected] (4:2:0, 8-bit) and provides the ability to
adjust the image with a number of fine tuning options including: contrast,
brightness, hue, saturation, sharpness, noise reduction, and RGB levels.
Furthermore, this unit supports passing 7.1 channel LPCM digital audio as
well as advanced Bitstream and HD Bitstream audio formats via the HDMI
input, or analogue stereo audio may be embedded from the provided
stereo mini-jack connection. Shortcut keys are provided to quickly
change the output resolution to 1080p60 or XGA when needed for quick
connection to a display or for troubleshooting purposes.
Additionally, the unit may be powered locally or via 48V PoH (Power over
HDBaseT) from a compatible HDBaseT Receiver, which allows for greater
flexibility in installations. The unit can be controlled via front panel
buttons with a comprehensive OSD.
2. APPLICATIONS
Presenter device display in classrooms and lecture halls
PC/Laptop presentation switching in boardrooms
Using classic media players with 4K HDMI displays
3. PACKAGE CONTENTS
1×HDMI/VGA to HDBaseT Scaler (PD)
1×5V/2.6A DC Power Adapter
1×3.5mm to IR Extender Cable
1×3.5mm to IR Blaster Cable
1×3-pin Terminal Block to 9-pin D-sub Adapter Cable
1×Shockproof Feet (Set of 4)
1×Operation Manual
6
4. SYSTEM REQUIREMENTS
HDMI or VGA source equipment such as media players, video game
consoles, PCs or set-top boxes.
A compatible HDBaseT receiver with 48V PoH support is strongly
recommended.
The use of “Premium High Speed HDMI” cables is highly
recommended.
The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly
recommended.
5. FEATURES
HDMI 2.0 and DVI 1.0 compatible
HDCP 1.x and HDCP 2.2 compliant
1 HDMI and 1 PC input
1 Analogue Stereo Audio input
1 HDBaseT output
HDMI input supports input resolutions up to [email protected]
VGA input supports resolutions up to 1080p60/WUXGA (RB)
Scaled HDBaseT output supports resolutions from 640×[email protected] up
to [email protected] (4:2:0, 8-bit)
HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,
48V PoH, and Control (bidirectional IR/RS-232 pass-through)
Simultaneous transmission of uncompressed video, audio and data
over a single 100m/328ft Cat.5e/6/7 cable at 1080p60 and 70m/230ft
at 4K
Supports pass-through of LPCM 7.1, Bitstream and HD Bitstream audio
formats
Analogue stereo audio insertion support via stereo mini-jack
Unit may be powered locally or via 48V PoH from a compatible
HDBaseT Receiver (PSE)
Controllable via front panel buttons with comprehensive OSD
7
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
PUV-1620S-TX
IN
HDMI
SERVICE
1
MENU
-
+
ENTER
4
5
6
7
VGA
2
3
1 SERVICE: This is reserved for firmware update use only.
2 POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
3 IN Button & LEDs: Press this button to switch between the HDMI
and VGA inputs. The LED will illuminate to indicate which source is
currently selected.
4 MENU: Press to enter the OSD menu, or to back out from menu items.
Note: Pressing “MENU” and “+” together will reset the output resolution
to XGA (1024×[email protected]). Pressing “Menu” and “−” together will reset the
output resolution to [email protected]
5 −: Press to move down or adjust selections within OSD menus.
6 +: Press to move up or adjust selections within OSD menus.
Note: Pressing and holding the “+” and “−” keys at the same time for more
than 3 seconds will perform a factory reset of the unit.
7 ENTER: Press to confirm a selection within the OSD or to go deeper
into a menu item.
8
6.2 Rear Panel
IR
IN
T R
HDMI
VGA
AUDIO
IN
OUT
RS-232
LAN
CAT5e/6/7 OUT
1
2
3
4
5
6
7
8
DC 5V
9
1 HDMI IN: Connect to HDMI source equipment such as a media player,
game console or set-top box. DVI sources are supported with the use
of an HDMI to DVI adapter.
2 VGA IN: Connect to VGA source equipment such as a PC or laptop.
3 AUDIO IN: Connect to the stereo analogue output of a device such as
a CD player or PC.
4 IR IN: Connect to the provided IR Extender to extend the IR control
range of devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-ofsight of the IR Extender.
5 IR OUT: Connect to the provided IR Blaster to transmit IR signals from
the other end of the HDBaseT connection to devices within direct lineof-sight of the IR Blaster.
6 RS-232: Connect to a PC, laptop or other serial control device for the
extension of RS-232 signals.
7 LAN: Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection.
8 CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with a
single Cat.5e/6/7 cable for transmission of all data signals.
9 DC 5V: Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power. (Optional)
Note: This unit can be powered completely via HDBaseT if connected to
a compatible 48V PoH PSE (Power Supplying Equipment) Receiver. Use of
the 5V DC power adapter is optional in that case.
9
6.3 IR Cable Pinouts
IR Extender
Infrared
Power
3 Ground
1
2
IR Blaster
Power
Infrared
3 NC
1
2
6.4 OSD Menu
All functions of this unit can be controlled by using the OSD (On Screen
Display) which is activated by pressing the Menu button on the front of
the unit. Use the + (PLUS), − (MINUS), and ENTER buttons to navigate the
OSD menu. Press the Menu button to back out from any menu item and
then press it again to close the menu.
MAIN MENU
Picture
Input
Output
OSD
Miscellany
Factory
Information
The individual functions of the OSD will be introduced in the following
section. Items marked in BOLD are the factory default settings.
10
PICTURE
LEVEL 2
LEVEL 3
LEVEL 4
Brightness
0~100 (50)
Contrast
0~100 (50)
Finetune
Hue
0~100 (50)
Saturation
0~100 (50)
Sharpness
0~100 (0)
Noise Reduction
OFF
Low
Middle
High
Auto
Colour
Red
0~100 (50)
Green
0~100 (50)
Blue
0~100 (50)
1) Brightness: Provides control over the overall brightness of the scaled
output image.
2) Contrast: Provides control over the overall contrast of the scaled
output image.
3) Finetune (Hue): Provides control over the hue shift of the scaled
output image.
Finetune (Saturation): Provides control over the colour saturation
level of the scaled output image.
Finetune (Sharpness): Provides control over the amount of sharpness
processing to apply to the scaled output image.
Finetune (Noise Reduction): Provides control over the aggressiveness
of the digital noise reduction processing when applied to the scaled
output image. Selecting “Off” disables all noise reduction processing.
4) Colour (Red/Green/Blue): Provides control over the red, green, and
blue colour level of the scaled output.
11
INPUT
LEVEL 2
LEVEL 3
Video Source
HDMI
PC
Audio Source
EMBEDDED
Automatic
Analogue
1) Video Source: Selects the input source to display.
2) Audio Source: Provides control over the audio source to use with the
HDMI input. Selecting “Embedded” passes the HDMI source’s audio
without modification. Selecting “Analogue” embeds the analogue
audio source into the HDMI signal for output. Selecting “Automatic”
allows the unit to automatically use the analogue audio source if no
audio is detected from the HDMI input.
12
OUTPUT
LEVEL 2
LEVEL 3
Size
Overscan
Full
BEST FIT
Pan Scan
Letterbox
Underscan
Follow In
4K In -> 4K Out
BYPASS
Scaler
Resolution
NATIVE
640×480 60
800×600 60
1024×768 60
1280×768 60
1360×768 60
1280×720 60
1280×800 60
1280×1024 60
1440×900 60
1400×1050 60
1680×1050 60
1600×1200 60
1920×1080 60
1920×1200 60
720×480p 60
720×576p 50
13
OUTPUT
LEVEL 2
LEVEL 3
1280×720p 50
1280×720p 60
1920×1080p 24
1920×1080p 25
1920×1080p 30
1920×1080p 50
1920×1080p 60
4K2K 24
4K2K 25
4K2K 30
4K2K (4:2:0) 50
4K2K (4:2:0) 60
1) Size: Selects the aspect ratio to use when outputting the source. “Full”
stretches the source to fill the output resolution, regardless of the
original aspect ratio, while “Best Fit” will always attempt to retain the
original source’s correct aspect ratio by adding black bars if necessary.
“Follow In” centers the source on the screen, without any scaling (1:1
pixel reproduction).
Notes: This menu is only available when scaler mode is enabled and the
input/output is not 4K with matching refresh rates. When “Follow In” is
used with 4K sources the input resolution will automatically be reduced to
1080p prior to output.
2) 4K In -> 4K Out: Selecting “Bypass” forces the unit to pass all 4K
sources without modification (scaling or frame rate conversion).
Selecting “Scaler” allows the unit to scale 4K sources when they do not
match the output resolution exactly.
Note: If a 4K source exactly matches the selected output resolution it will
be output in bypass mode, even if “Scaler” mode is selected.
3) Resolution: Selects the output resolution to use. Selecting “Native”
will make the unit automatically select an output resolution based on
the detected EDID of the connected display.
14
OSD
LEVEL 2
LEVEL 3
H-Position
0~100 (50)
V-Position
0~100 (50)
Timer
OFF
5s
10s
15s
20s
25s
30s
35s
40s
45s
Timer
50s
55s
60s
Transparent
0~100 (100)
Display
Off
On
INFO
1) H-Position: Set the horizontal position of the OSD menu.
2) V-Position: Set the vertical position of the OSD menu.
3) Timer: Set the length of time to wait before automatically turning off
the OSD menu if there is no user interaction. The timer may also be
disabled.
4) Transparent: Set the transparency level of the OSD menu. A setting of
100 is completely opaque.
5) Display: Control the visibility of the on screen information display.
15
Selecting “Info” will show the information display for a few seconds
before automatically turning it off after a source or resolution change.
MISCELLANY
LEVEL 2
LEVEL 3
HDCP On Input
ON
LEVEL 4
Off
HDCP On Output
FOLLOW OUTPUT
Follow Input
Auto Sync Off
DISABLE
Fast
Slow
Auto Input
On
OFF
EDID Manage
HDMI EDID
DEF. 1080P
Def. 4K2K (3G)
Def. 4K2K (4:2:0)
Def. 4K2K (6G)
Output
1) HDCP On Input: Enables or disables HDCP support on the HDMI
input.
2) HDCP On Output: Sets the HDCP version selection logic to use with
the output signal. Selecting “Follow Input” will cause the unit to output
using the HDCP version required by the currently connected source.
Selecting “Follow Output” will always output using the maximum
supported HDCP version reported by the connected receiver.
3) Auto Sync Off: Sets the relative amount of time to continue
outputting black with sync if there is no live source and no operations
have been executed on the unit. Setting this to “Disable” forces the
unit to always output sync.
4) Auto Input: Enables or disables automatically switching on source
loss or when a new live input has been detected.
16
5) EDID Manage (HDMI EDID): Select the EDID to use with the HDMI
input. Selecting “Output” will use the EDID copied from the currently
connected receiver.
FACTORY
LEVEL 2
LEVEL 3
Reset
NO
Yes
1) Reset: Selecting YES will reset all of the unit’s settings back to their
factory defaults.
INFORMATION
LEVEL 2
LEVEL 3
Source
Input
Output
[Current Status Details]
Valens Version
Version
1) Information: This screen displays information about the unit’s current
state, input and output status, as well as the current Valens and unit
firmware versions.
17
7. CONNECTION DIAGRAM
PC/Laptop
Media Player
HDMI
Input
VGA
Input
Stereo
Input
3m
7m
3m
1.5m
60°
60°
IR In & Out
IR
IN
T R
HDMI
VGA
AUDIO
IN
OUT
RS-232
LAN
CAT5e/6/7 OUT
DC 5V
Cat.5e/6/7
Cable
RS-232
Power
Supply
RS-232 Equipped
PC/Laptop
LAN
Network
Switch
60°
3m
7m
60°
1.5m
IR In & Out
3m
HDMI
Output
RX
RS-232
RS-232 Controlled
Device
LAN
UHDTV
18
8. SPECIFICATIONS
8.1 Technical Specifications
HDMI Bandwidth
600MHz/18Gbps
HDBaseT Bandwidth
340MHz/10.2Gbps
Input Ports
1×HDMI
1×VGA
1×Stereo (3.5mm)
Output Port
1×HDBaseT (RJ45)
Pass-through Ports
1×IR Extender (3.5mm)
1×IR Blaster (3.5mm)
1×RS-232 (3-pin Terminal Block)
1×LAN (RJ45)
IR Frequency
30–50kHz
(30–60kHz under ideal conditions)
Baud Rate
Up to 115200bps
Power Supply
5V/2.6A DC
(US/EU standards, CE/FCC/UL certified)
ESD Protection
Human Body Model:
±8kV (Air Discharge)
±4kV (Contact Discharge)
Dimensions
231.5mm×25mm×158mm (W×H×D)
[Case Only]
231.5mm×30mm×166.7mm (W×H×D)
[All Inclusive]
Weight
898g
Chassis Material
Metal
Silkscreen Colour
Black
Operating Temperature
0 ˚C–40 ˚C/32 ˚F–104 ˚F
Storage Temperature
-20 ˚C–60 ˚C/-4 ˚F–140 ˚F
Relative Humidity
20–90% RH (Non-condensing)
Power Consumption
8.3W/19.6W (PoH)
19
8.2 Video Specifications
Supported PC Resolutions (Hz)
HDMI
Input
VGA
Input
HDBaseT
Output
640×480
60, 72, 75, 85


60
800×600
56, 60, 72, 75, 85


60
1024×768
60, 70, 75, 85


60
1280×768
60, 75, 85


60
1360×768
60



1280×720
60



1280×800
60



1280×1024
60



1440×900
60



1400×1050
60



1680×1050
60



1600×1200
60



1920×1080
60



1920×1200
60 (RB)



HDMI
Input
VGA
Input
HDBaseT
Output
Supported TV Resolutions (Hz)
720×480i
60



720×576i
50



720×480p
60



720×576p
50



1280×720p
50, 60



1920×1080i
24, 25, 30, 50, 60



1920×1080p
24, 25, 30, 50, 60



3840×2160p
24, 25, 30



20
HDMI
Input
VGA
Input
HDBaseT
Output
3840×2160p (YUV 50, 60
4:2:0)



3840×2160p
50, 60



4096×2160p
24, 25, 30



4096×2160p (YUV 50, 60
4:2:0)



4096×2160p



Supported TV Resolutions (Hz)
50, 60
8.3 Audio Specifications
Analogue Input
Max Audio Level
2Vrms
Impedance
499kΩ
Type
Unbalanced
21
8.4 Cable Specifications
1080p
4K
HDMI Cable
Length
8-bit
12-bit
8-bit
Input
10m
10m
5m
Cat. Cable
Length
1080p
4K
Cat.5e
100m
70m
Cat.6
100m
70m
Cat.7
100m
100m
Full HD Video (1080p)
-- Up to [email protected], 12-bit colour
-- Data rates lower than 5.3Gbps or below 225MHz TMDS clock
Ultra HD Video (4K)
-- [email protected], 25, 30Hz & [email protected], 60Hz (YUV 4:2:0), 8-bit colour
-- Data rates higher than 5.3Gbps or above 225MHz TMDS clock
8.5 HDBaseT Features
HDBaseT Feature
Supported
Video & Audio

IR Pass-through

RS-232 Pass-through

Accept power from Receiver

Send power to Receiver

LAN Pass-through

22
9. ACRONYMS
ACRONYM
COMPLETE TERM
Cat.5e
Category 5 (enhanced) cable
Cat.6
Category 6 cable
Cat.7
Category 7 cable
CEC
Consumer Electronics Control
DVI
Digital Visual Interface
EDID
Extended Display Identification Data
HD
High-Definition
HDCP
High-bandwidth Digital Content Protection
HDMI
High-Definition Multimedia Interface
HDR
High Dynamic Range
HDTV
High-Definition Television
IR
Infrared
LAN
Local Area Network
LPCM
Linear Pulse-Code Modulation
OSD
On-Screen Display
PC
Personal Computer
PD
Powered Device
PoH
Power over HDBaseT
PSE
Power Sourcing Equipment
UHD
Ultra-High-Definition
UHDTV
Ultra-High-Definition Television
USB
Universal Serial Bus
VGA
Video Graphics Array
WUXGA (RB)
Widescreen Ultra Extended Graphics Array (Reduced
Blanking)
23
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279
Email: [email protected]
www.cypeurope.com
v1.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement