Cyp PUV-2100TX-AVLC 4KUHD HDR HDMI over HDBaseT Transmitter with IR, RS232, PoH, Lan & ARC Operation Manual

PUV-2100TX-AVLC
HDBaseT™ 4K/HDR Transmitter (100m)
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
3
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE
SUMMARY OF CHANGE
v1.00
First release
4
21/06/2019
CONTENTS
1. Introduction�������������������������������������������6
2. Applications�������������������������������������������6
3. Package Contents����������������������������������6
4. System Requirements���������������������������7
5. Features��������������������������������������������������8
6. Operation Controls and Functions�������9
6.1 Front Panel��������������������������������������������������� 9
6.2 Rear Panel���������������������������������������������������10
6.3 IR Cable Pinouts���������������������������������������11
6.4 RS-232 Bypass Pinout�����������������������������11
6.5 Serial Control (Via USB Port)����������������11
6.6 Serial Commands (Via USB Port)��������12
7. Connection Diagram�������������������������� 13
8. Specifications�������������������������������������� 14
8.1 Technical Specifications������������������������14
8.2 Video Specifications�������������������������������15
8.3 Audio Specifications�������������������������������16
8.4 Cable Specifications�������������������������������17
8.5 HDBaseT Features������������������������������������18
9. Acronyms��������������������������������������������� 18
5
1. INTRODUCTION
This HDBaseT 2.0 Transmitter provides for the extension of 4K video with
HDR and high bitrate audio over a single Cat.6a/7 cable at distances of up
to 100m (328 feet). This Transmitter complies with the advanced HDCP 2.2
and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and
HDMI 1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation,
4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit)
as well as 10/12-bit sources with HDR, are able to be processed and
extended by the use of AVLC (Adaptive Visually Lossless Compression)
when connected to a compatible AVLC Receiver. This transmitter can also
pass RS-232, IR, Ethernet, and multiple audio streams across the same
cable that carries the video signal.
The bi-directional optical audio feature allows optical audio to be
exchanged bi-directionally between the Transmitter and Receiver.
Rounding out the feature set is automatic HDBaseT clock stretching and
TMDS re-clocking support. The 48V PoH (Power over HDBaseT) feature
allows a compatible connected Receiver to be powered directly by the
Transmitter, eliminating the need for a separate power supply for the
Receiver.
2. APPLICATIONS
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
3. PACKAGE CONTENTS
1×HDMI over HDBaseT 2.0 Transmitter (PD) with HDR/ARC
1×24V/2.7A DC Power Adapter
1×Power Cord
1×3.5mm to IR Blaster Cable
1×Shockproof Feet (Set of 4)
1×Operation Manual
6
4. SYSTEM REQUIREMENTS
HDMI source equipment such as a media player, video game console
or set-top box.
An HDBaseT 2.0 Receiver equipped with AVLC and 48V PoH (PD)
support is strongly recommended.
The use of “Premium High Speed HDMI” cables, and industry standard
Cat.6, Cat.6a or Cat.7, is highly recommended.
7
5. FEATURES
HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
and output
Supports Deep Colour input and output up to 12-bit
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
Supports CEC bypass
HDBaseT output transmits video, audio and data over a single
Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K
when using Cat.6a/7
HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,
48V PoH (PSE), bi-directional optical audio and Control
(bi-directional IR/RS-232 pass-through)
Integrated AVLC (Adaptive Visually Lossless Compression) activates
when the bandwidth requirements of the source are beyond 10.2Gbps
(340MHz) allowing for sources up to 18Gbps (600MHz) to be sent to a
compatible Receiver with no loss of visual quality
The AVLC feature allows manual selection between High Quality Mode
(Full bandwidth) and Standard Mode (Lower bandwidth, useful for
longer cable runs with 4K sources)
Bi-directional optical audio extension support
Supports HDMI DDC bus clock stretching for improved compatibility
with certain Blu-ray players
Performs TMDS re-clocking and signal re-generation for improved
signal integrity
Supports standard 48V PoH from Transmitter to Receiver (compatible
Receivers only)
Note: The 48V PoH function is designed for powering compatible Receiver
units only. Non-PoH Receivers will need their own power supply. Receivers
from other brands may not be compatible.
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERVICE
PUV-2100TX-AVLC
1
ARC
HQ/STD
HQ
POWER
OPT
SWITCH
STD
LINK
2
3
4
5
1 SERVICE Port: This port is reserved for firmware update and serial
control use only.
2 ARC & OPT LEDs: These LEDs illuminate to indicate if the optical
output source is coming from the optical input or ARC on the
connected Receiver.
Note: Selecting ARC as a source requires a compatible Receiver.
3 HQ/STD SWITCH Button: This switch allows the user to select which
compression mode to use when AVLC is required. A single press
toggles between modes.
HQ (High Quality) mode uses the least amount of compression and
provides the highest possible visual quality (perceptually identical to
the original). In this mode, AVLC compression activates for any signal
requiring more than 9Gbps.
STD (Standard Quality) mode applies additional signal reduction
methods to lower the bandwidth requirements even further,
improving transmission reliability at the cost of some visual fidelity. In
this mode, AVLC compression activates for any signal requiring more
than 7.5Gbps.
4 HQ/STD LEDs: These LEDs illuminate to indicate which AVLC mode is
selected: HQ (High Quality) or STD (Standard Quality).
5 POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
LINK LED: This LED will illuminate solidly when a live connection with
a compatible Receiver is active.
9
6.2 Rear Panel
IR
DC 24V
RS-232
BYPASS
1
2
OUT
OPTICAL
IN
3
OUT
IN
4
CAT5e/6/7 OUT
HDMI IN
LAN
5
6
7
1 DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power.
2 RS-232 BYPASS Port: Connect to a PC, laptop or serial controllable
device for the extension of RS-232 signals between both ends of the
HDBaseT connection.
3 IR OUT Port: Connect to the provided IR Blaster to transmit IR signals
from the other end of the HDBaseT connection to devices within
direct line-of-sight of the IR Blaster.
IR IN Port: Connect to an IR Extender to extend the IR control range
of devices connected to the other end of the HDBaseT connection.
Ensure that the remote being used is within direct line-of-sight of the
IR Extender.
4 OPTICAL OUT Port: Connect to powered speakers or an amplifier
for digital audio output using an appropriate optical cable. Audio is
sourced from the Optical Audio Input port on a connected compatible
Receiver.
OPTICAL IN Port: Connect to the optical audio output of a device
such as a media player or game console using an appropriate optical
cable. Audio is sent to the Optical Audio Output on a connected
compatible Receiver.
5 CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver
with a single Cat.5e/6/7 cable for transmission of all data signals. 48V
PoH will also be supplied to a connected compatible PD Receiver.
6 HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console or set-top box.
7 LAN Port: Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection.
10
6.3 IR Cable Pinouts
IR Extender
Cable
IR Blaster
Cable
1 Power
2 Infrared
3 Not Used
1 Infrared
2 Power
3 Ground
6.4 RS-232 Bypass Pinout
DCD
RxD
TxD
DTR
GND
1
2
3
4
5
RI
CTS
RTS
DSR
9
8
7
6
DE-9 Female Port
6.5 Serial Control (Via USB Port)
Serial Port Default Settings
Baud Rate
19200
Data Bits
8
Parity Bit
None
Stop Bits
1
Flow Control
None
11
6.6 Serial Commands (Via USB Port)
COMMAND
Description and Parameters
help
Show the full command list.
?
Show the full command list.
get fw ver
Show the unit's current firmware version.
get model name
Show the unit's model name.
get model type
Show the unit's product type.
get power
Show the unit's current power state.
set system reboot
Reboot the unit.
get audio out A route
Show the currently selected optical audio source type from the
connected Receiver (ARC or optical).
set transceiver compress rate N1
Set the compression quality used by the unit.
Available values for N1:
1
[HQ (high quality)]
2
[STD (standard quality)]
get transceiver compress rate
Show the unit's current compression quality setting.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
12
7. CONNECTION DIAGRAM
Powered
Speakers
Media Player
1.5m
HDMI &
S/PDIF Inputs
60°
3m
RS-232 Equipped
PC/Laptop
7m
3m
60°
S/PDIF
Output
LAN
RS-232
Network
Switch
Power Supply
IR
DC 24V
RS-232
BYPASS
OUT
CAT5e/6/7 OUT
HDMI IN
LAN
TX
CAT5e/6/7 IN
HDMI OUT
LAN
RX
OPTICAL
IN
OUT
IN
Cat.5e/6/7
Cable
IR
RS-232
BYPASS
OUT
OPTICAL
IN
OUT
IN
RS-232
RS-232 Controlled
Device
S/PDIF
Output
60°
3m
7m
HDMI Output,
S/PDIF Input
& LAN
3m
60°
1.5m
Powered
Speakers
Smart TV with Optical
Audio Output Port
13
8. SPECIFICATIONS
8.1 Technical Specifications
HDMI Bandwidth
600MHz/18Gbps
HDBaseT Bandwidth
340MHz/10.2Gbps
Input Ports
1×HDMI
1×S/PDIF (TOSLINK)
Output Ports
1×HDBaseT (RJ-45)
1×S/PDIF (TOSLINK)
Pass-through Ports
1×IR Extender (3.5mm)
1×IR Blaster (3.5mm)
1×RS-232 (DE-9)
1×LAN (RJ-45)
Service/Control Port
1×USB (Mini-B)
IR Frequency
30 – 50kHz
(30 – 60kHz under ideal conditions)
Baud Rate
Up to 115200
Power Supply
24V/2.7A DC
(US/EU standards, CE/FCC/UL certified)
ESD Protection
Human Body Model:
±8kV (Air Discharge)
±4kV (Contact Discharge)
Dimensions
231.5mm×25mm×108mm (W×H×D)
[Case Only]
231.5mm×25mm×115mm (W×H×D)
[All Inclusive]
Weight
640g
Chassis Material
Metal (Steel)
Chassis Colour
Black
Operating Temperature
0˚C – 40˚C/32˚F – 104˚F
Storage Temperature
-20˚C – 60˚C/-4˚F – 140˚F
Relative Humidity
20 – 90% RH (Non-condensing)
Power Consumption
5W
14
8.2 Video Specifications
Input
Output
HDMI
HDBaseT
720×400@85


640×480@60/72/75/85


720×480i@60


720×480p@60


720×576i@50


720×576p@50


800×600@56/60/72/75/85


1280×720@50/60


1024×768@60/70/75/85


1280×768@60/75


1360×768@60


1366×768@60


1280×800@60


1152×864@75


1440×900@60


1280×960@60


1280×1024@60


1400×1050@60


1680×1050@60/60 (RB)


1920×1080i@50/60


1920×1080p@24/25/30/50/60


1600×1200@60


1920×1200@60 (RB)


2560×1440@60 (RB)


Supported Resolutions (Hz)
15
Input
Output
HDMI
HDBaseT
2560×1600@60 (RB)


3840×2160@24/25/30


3840×2160@50/60 (4:2:0)


3840×2160@24/25/30, HDR10

AVLC
3840×2160@50/60 (4:2:0), HDR10

AVLC
3840×2160@50/60 (4:4:4)

AVLC
4096×2160@24/25/30


4096×2160@50/60 (4:2:0)


4096×2160@24/25/30, HDR10


4096×2160@50/60 (4:2:0), HDR10


4096×2160@50/60 (4:4:4)


Supported Resolutions (Hz)
8.3 Audio Specifications
HDMI Input/Output
LPCM
Max Channels
8 Channels
Sampling Rate (kHz)
32, 44.1, 48, 88.2, 96, 176.4, 192
Bitstream
Supported Formats
16
Standard & High-Definition
S/PDIF Input/Output
LPCM
Max Channels
2 Channels
Sampling Rate (kHz)
32, 44.1, 48, 88.2, 96, 176.4, 192
Bitstream
Supported Formats
Standard
8.4 Cable Specifications
1080p
Cable Length
4K30
4K60
8-bit
12-bit
(4:4:4)
8-bit
(4:4:4)
8-bit
15m
10m
5m
3m
High Speed HDMI Cable
HDMI Input
Ethernet Cable
Cat.5e/6
100m
90m
Cat.6a/7
100m
100m
1080p (FHD Video)
-- Up to 1080p@60Hz, 12-bit colour
-- Data rates lower than 5.3Gbps or below 225MHz TMDS clock
4K30 (UHD Video)
-- 4K@24/25/30Hz & 4K@50/60Hz (4:2:0), 8-bit colour
-- 4K@50/60Hz (4:4:4, 8-bit) with AVLC active
-- Data rates higher than 5.3Gbps or above 225MHz TMDS clock but
below 10.2Gbps
4K60 (UHD+ Video)
-- 4K@50/60Hz (4:4:4, 8-bit), AVLC required over HDBaseT
-- 4K@50/60Hz (4:2:0, 10-bit HDR), AVLC required over HDBaseT
-- Data rates higher than 10.2Gbps
17
8.5 HDBaseT Features
HDBaseT Feature Set
Video & Audio
Supported
IR Pass-through
Supported
RS-232 Pass-through
Supported
Accept power from Receiver
Unsupported
Send power to Receiver
Supported
LAN Pass-through
Supported
9. ACRONYMS
ACRONYM
COMPLETE TERM
ARC
Audio Return Channel
AV
Audio/Video
AVLC
Adaptive Visually Lossless Compression
Cat.5e
Enhanced Category 5 cable
Cat.6
Category 6 cable
Cat.6a
Augmented Category 6 cable
Cat.7
Category 7 cable
CEC
Consumer Electronics Control
DVI
Digital Visual Interface
EDID
Extended Display Identification Data
HD
High-Definition
HDCP
High-bandwidth Digital Content Protection
HDMI
High-Definition Multimedia Interface
HDR
High Dynamic Range
HDTV
High-Definition Television
IP
Internet Protocol
18
ACRONYM
COMPLETE TERM
IR
Infrared
LAN
Local Area Network
LED
Light-Emitting Diode
LPCM
Linear Pulse-Code Modulation
PC
Personal Computer
PD
Powered Device
PoH
Power over HDBaseT
PSE
Power Sourcing Equipment
S/PDIF
Sony/Philips Digital Interface Format
TCP
Transmission Control Protocol
UHD
Ultra-High-Definition
UHD+
Ultra-High-Definition Plus
UHDTV
Ultra-High-Definition Television
USB
Universal Serial Bus
19
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279
Email: [email protected]
www.cypeurope.com
v1.00