Faber INCA Smart 24 GR A versatile built in range hood Technical Specifications

INCA SMART GRAY
INSERT RANGE HOOD
VERSATILE BUILT IN VENT HOOD.
The Inca Smart power pack is perfect for the homeowner
who wants a built in range hood that fits into most cabinets and most budgets. This compact insert
fits easily into upper cabinets as small as the standard 12” deep x 24" or 30” wide and features an
exceptionally well-finished face plate.
AVAILABLE MODELS
Model #
Size / Color
Motor Class (CFM)
Sound Levels (sones)
INSM24GR250-B
24 Gray
250 CFM
1 - 3 sones
INSM28GR250-B
28 Gray
250 CFM
1 - 3 sones
KEY FEATURES
3 Speed Slide Control
Halogen Lighting
Easy Snap Mounting Clips
Easy use slide controls for speed
and lighting.
2 x 28 (W) bulbs offer a warmer
light for your cooking surface
while reducing consumption by
30%.
Installation is made easy with built-in
adjustable clips that tighten onto the
sides of the cabinet floor.
INCA SMART GRAY
INSERT RANGE HOOD
SPECIFICATIONS
DIMENSIONS
cut out dimensions
(24”) 19 19/32” W / 10 9/32”D
(28”) 26 21/32” W / 10 9/32”D
convertible to ductless /
recirculating
yes – charcoal filter needed, need air
return back into kitchen out of cabinet
controls
3 speed slide control
lighting
2 x 28 (w) halogen
INCA SMART GRAY
ducting top
5" round
grease filters
dishwasher safe mesh
INSERT RANGE HOOD
built in mounting hardware yes - easy snap mounting clips
AC input
120 V - 60 hz
AC power
Max 190 W at 1.6 A
green energy saver mode
yes
Front View
PERFORMANCE
SPEED
CFM
1
85
2
160
3
250
1
2
3
Sones
ACCESSORIES
Side View
# FILTER4 –
Charcoal Filter Kit
High quality charcoal filter
for use when recirculating
the air back into the kitchen.
Filters out odor and should
be replaced every 6 months.
Some ductwork is required
to exhaust the unit out of the
cabinet.
Cut Out
Bottom View
# LINE30ST / LINE36ST –
Stainless Steel Liner 30 &
36" Create a perfectly sealed,
non-combustible 4" tall perimeter to "line" the wood below the
Inca Smart. Depth adjustable
from 16" - 17 7/8". For use with
the 28" Inca Smart or Inca HC
only.
NOTE : Liners do not fit the Inca
Smart Gray 24"
30" or 36"
WARNING! Product specifications are subject to
change without notification. Consult the installation
instructions before you begin installing this range
hood. * Check local make up air codes for
guidelines.
Rev :4/19
2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: [email protected] www.faberonline.com Imagined in Italy
INCA SMART GRAY
INSERT RANGE HOOD
LINER SPECIFICATIONS
Liners are stainless steel kits that are optional for cabinet insert hoods. They create a metal
4” tall perimeter to “line” the wood below the range hood with metal. They create a more
finished look and move the range hood up 4” creating additional capture area. In some
cases, a liner may be required by local code if the cabinet starts at below 30” off the stove
(check local building codes). All liners are adjustable in depth with a telescoping frame.
LINE24ST – USE WITH INSM24 ONLY FOR 24” WIDE CABINETS
LINE30ST – USE WITH INSM28 ONLY FOR 30” WIDE CABINETS
LINE36ST – USE WITH INSM28 ONLY FOR 36” WIDE