Faber Inca SD 29 SS professional built in range hood Technical Specifications

Faber Inca SD 29 SS professional built in range hood Technical Specifications
INCA SD
PRO INSERT RANGE HOOD
NEW BUILT IN VENTILATION TO PAIR WITH CURRENT KITCHEN TRENDS. A NEW PRO style built
in range hood with VAM Technology and a depth of 13 3/4" making it an ideal choicefor custom depth 15"
cabinetry and perfect for kitchen remodeling projects. The restaurant style baffle filters and all metal
motor housing & impellers will stand up to the heat!
Now with
Variable Air Management
adjust CFM for
your local codes
AVAILABLE MODELS
Model #
Size / Color
Set your CFM Level Sound Levels (sones)
INSD29SSV
29 Stainless
600, 395, 295 CFM
2.8 - 7.5 sones
INSD35SSV
35 Stainless
600, 395, 295 CFM
2.8 - 7.5 sones
Note: set to 600 CFM motor class out of the box
KEY FEATURES
Easy Snap Mounting Clips
Pro Baffle Filter
Pro Blower
Installation with easy built-in adjustable clips that tighten onto the
sides of the cabinet floor
Professional style baffle grease filters,
which are dishwasher safe and are
able to stand up to pro cooking
An all metal housing and metal impellers
to take the heat from professional style
cooking
Direct Rear Venting
Vent the ducting up or rotate the
blower to the back (as shown above)
to avoid extra duct work when on an
outside wall
INCA SD
PRO INSERT RANGE HOOD
SPECIFICATIONS
DIMENSIONS
cut out dimensions 29"
27 5/8" w x 13 9/16" d
cut out dimensions 35"
33 3/4" w x 13 9/16" d
convertible to ductless /
recirculating
yes – FILTER1 or FILTER1LL
body width | depth
28 3/8" OR 34 5/16" w X 13 3/4" d
height inside cabinet
12 15/16" high
Variable Air Management
Yes (set to 295, 395, 600 CFM)
controls
4 speed electronic w/ white LED
lighting
2 X 5 W LED
ducting top/rear (Vari-Duct)
6" round
buillt In mounting
Yes - Easy Snap Clips
grease filters
dishwasher safe pro baffle
pro motor w/ metal impellers
yes
10 minute intensive speed
yes
15 minute auto shut off
yes
ADA compliant
yes - with optional remote
power cord included
yes
PERFORMANCE
SPEED
29" Dimensions
35" Dimensions
CFM
1
150
2
295
3
395
BOOST
560
Sones
2.8
4.3
6.0
7.5
ACCESSORIES
# FILTER1 –
Charcoal Filter Kit
High quality charcoal filter for use
when recirculating the air back
into the kitchen. Filters out odor
and should be replaced every 6
months
# FILTER1LL –
Long Lasting Charcoal
Filter Kit
New washable charcoal filter can
be recharged and washed up to 8
times. For use when
recirculating the air back into the
kitchen. Filters out odor and can
last up to 4 years.
# REMCTRL2 –
Remote Control
Control all features of the hood
from the convenience of a ADA
compliant wireless remote control.
# WIREBOX –
Fixed Wiring Box
Replace the power cord with a
hard wired box to power the range
hood
Rev :7/19
# LINE30ST / LINE36ST–
Stainless Steel Liner 30 & 36"
Cut Out Size
(FOR 29" HOOD ONLY)
See page 3 for more information
# LINE36PT (NEW)
Stainless Steel Liner 36"
(FOR 35" HOOD ONLY)
See page 3 for more information
# MUDAMPER6 / MUDAMPER8 Universal Make-Up Air Damper
Satisfies make-up air requirements,
this kit uses an air switch to activate
the make-up air damper to open
and bring fresh air into the home
when the hood fan is on. It then
closes tightly when the hood is off.
The CFM level is not reduced with
this accessory.
WARNING! Product specifications are subject to
change without notification. Consult the installation
instructions before you begin installing this range
hood. * Check local make up air codes for
guidelines.
2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: [email protected] www.faberonline.com Imagined in Italy
INCA SD
PRO INSERT RANGE HOOD
LINER SPECIFICATIONS
Liners are stainless steel kits that are optional for cabinet insert hoods. They create a metal
4” tall perimeter to “line” the wood below the range hood with metal. They create a more
finished look and move the range hood up 4” creating additional capture area. In some
cases, a liner may be required by local code if the cabinet starts at below 30” off the stove
(check local building codes). All liners are adjustable in depth with a telescoping frame.
LINE30ST – USE WITH INSD29SSV ONLY FOR 30” WIDE CABINETS
LINE36ST – USE WITH INSD29SSV ONLY FOR 36” WIDE
LINE36PT – USE WITH INSD35SSV ONLY FOR 36” WIDE CABINETS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement