Faber Maestrale 10 x 30 SS 600 cfm A stylish profesional kitchen wall range hood Technical Specifications

Faber Maestrale 10 x 30 SS 600 cfm A stylish profesional kitchen wall range hood Technical Specifications
MAESTRALE 10 UNDER CABINET RANGE HOOD
A NEW CHOICE IN PROFESSIONAL UNDER CABINET HOODS.
The new Maestrale by Faber is a
10" tall , 23" deep under cabinet wall hood with a 600 CFM Pro all metal blower housing and impellers. With baffle
style grease filters, top or direct rear venting, welded, wrapped and polished corners and a 3 speed control, this
unbranded hood can be mixed and matched with any cooking brand.
AVAILABLE MODELS
Model #
Size / Color
Motor Class (CFM)
Sound Levels (sones)
MAES3010SS600-B
30 Stainless
600 CFM
2.8 - 7.5 sones
MAES3610SS600-B
36 Stainless
600 CFM
2.8 - 7.5 sones
MAES4210SS600-B
42 Stainless
600 CFM
2.8 - 7.5 sones
KEY FEATURES
Pro Motor
The motor in this hood is surrounded
in metal with all metal impellers for
top performance
Adjustable Mounting
Hardware
Wall brackets are adjustable once
the hood is hung to insure a perfect
level installation
Direct Rear Venting
Baffle Grease Filters
Vent the ducting up or rotate the
blower to the back to avoid extra
duct work when on an outside
wall
Dishwasher safe SS metal filters
capture grease and allow for easy
clean up in the dishwasher
MAESTRALE 10 UNDER CABINET RANGE HOOD
SPECIFICATIONS
DIMENSIONS
depth / height
23" d / 10" h
convertible to ductless
yes - kit sold separately
controls
3 speed slider w/ led indicator
lighting
2 (30") or 3 (36", 48") x 5 (w) led
ducting top / rear (Vari-Duct)
6" round (top or back)
grease filters
dishwasher safe stainless steel baffle
pro motor with metal impellers
yes
ac power
350 watts / 2.9 amps
Front View
PERFORMANCE
CFM
SPEED
1
180
2
380
3
560
Sones
2.8
4.5
7.5
ACCESSORIES
# MUDAMPER6 / MUDAMPER8 –
Universal Make-Up Air Damper
Satisfies make-up air requirements, this kit uses an air switch to
activate the make-up air damper to open and bring fresh air into the
home when the hood fan is on. It then closes tightly when the hood
is off. The CFM level is not reduced with this accessory.
Side View
# DUCTGRT30 / DUCTGRT36 –
Ductless Vent Grate Kit
A 4” tall stainless steel vent grate which is installed between the
hood & the cabinet to recirculate the air back into the kitchen when
ducting outside isn’t possible. Includes the vent grate, hardware
and charcoal filters.
# FILTER1LL –
Long Lasting Charcoal Filter Kit
# FILTER1 –
Replacement Charcoal Filter Kit
recharged and washed up to 8 times. For use when recirculating the
air back into the kitchen. Filters out odor and can last up to 4 years.
New washable charcoal filter can be
High quality charcoal filter for use when recirculating the
air back into the kitchen. Filters out odor and should be
replaced every 6 months
# CFMRED2
CFM Reducer Kit*
# TELEMAES
Telescopic Chimney Cover
For use in make up air environments where an under 400 cfm hood
is required. This kit reduces the
ducting to 5” round and reduces
the cfm from 400 to under.
24” wide, extends to accomodate 8 - 9 foot ceilings
# FULL30 / FULL36 / FULL42
Full Width Duct Cover
12” high, extends full width of the hood
# CFMRED
CFM Reducer Kit
For use in make up air environments where an under 300 cfm hood
is required. This kit reduces the ducting to 5” round and reduces the
cfm to under 300.
Rev :4/19
WARNING! Product specifications are subject to
change without notification. Consult the installation
instructions before you begin installing this range
hood. * Check local make up air codes for
guidelines.
2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: [email protected] www.faberonline.com Imagined in Italy
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement