Fishman Aura IC User Guide

www.fishman.com
USER GUIDE
Aura Image Casting Preamp
Welcome
Thank you for making Fishman a part of your acoustic experience. We are proud
to offer you the finest acoustic amplification products available; high-quality
professional-grade tools which empower you to sound your very best. We are
confident the Aura Image Casting preamp will both enhance and inspire your
music making.
3
Quick Start
Before you begin, set the controls
as shown:
Volume
Plug in • Use a ¼-inch instrument cable.
Raise the Volume • Use the Volume control to set a desirable output level.
Select an Image • Use the Image switch
to browse the Images created for this instrument. Each Image is blended with the pickup
to produce an optimum tone.
Adjust Tone • Turning the Tone control
counter-clockwise reduces the amount of
treble in your sound.
4
Tone
Image
Select
Power
Plug in the guitar, and the preamp switches on. To conserve the battery, remove
the instrument cable from the guitar when the system is not in use. The LED under the control panel will flash once at power-up to tell you the preamp is on.
Low Battery Indicator
When the low battery LED comes on, you have approximately 1.5 hours before
the battery is exhausted.
5
www.fishman.com
471-300-380 Rev A 11-07