Miller CART RUNNER 300 244 User manual

Miller CART RUNNER 300 244 User manual
OWNER’S MANUAL
OM-232 455E
2012−04
Runnert Cart 300244
Small Runnert Cart 300988
1-1. Safety Symbol Definitions
NOTICE
DANGER! − Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
Cylinders contain gas under high pressure and can explode if damaged. Never let a welding electrode touch
any cylinder. Always secure cylinder to running gear,
wall, or other stationary support.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible hazards are shown in the adjoining symbols or explained in
the text.
Welding processes cause flying pieces of metal and slag.
Wear safety glasses with side shields.
Indicates statements not related to personal injury.
Trailers
Falling equipment can cause serious personal injury and
equipment damage. Use lifting eye to lift unit only, not
trailer, gas cylinders, or any other accessories. Use
equipment of adequate capacity to lift unit or parts such
as engine or generator.
Running Gear
Falling equipment can cause injury and damage, oversized cylinder can cause tipping. Properly install and secure all equipment onto cart before using cart. Always
secure or remove any tools stored on cart before moving
unit. Do not lift cart in any manner when equipment and
cylinder(s) are installed − use handles to move cart. Do
not overload handles with cables − use standard 10 to 15
foot cables as maximum lengths.
Indicates special instructions.
Beware of electric shock from welding electrode or wiring.
Touching the electrode while in contact with the work or
ground can cause electric shock. Always wear dry
gloves. Keep all panels and covers closed.
CALIFORNIA PROPOSITION 65 WARNINGS
Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects
and, in some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to the state of California to cause cancer, birth defects, or other reproductive
harm. Wash hands after use.
1-2. Assembled Cart & Cylinder Rack
Runner Cart For Maxstar/Dynasty 350/700
Overall Dimensions
Inches
Millimeters
Length
41-1/2
1054
Width
23-1/4
591
Height
43-3/4
1,111
Weight
55 lb
25 Kg
Small Runner Cart For Maxstar/Dynasty 280
Overall Dimensions
Inches
Millimeters
Length
41-1/2
1054
Width
19-1/2
495
Height
33-1/2
851
Weight
44 lb
20 Kg
804 873-C
OM-232 455 Page 2
1-3. Typical Cart With Welding Power Source, Cooling System, And Gas Cylinder
!
Be careful when placing or moving unit over uneven surfaces.
Tipping or falling equipment can
cause injury and damage equipment.
1
2
Gas cylinder - Not Supplied
Chain
Obtain and install gas cylinder. Secure
gas cylinder with chain.
3
Foot Control - Not Supplied
4
Foot Control Holder
5
Cable Holders (3)
Install foot control holder and cable holders in any of the screw holes located on
top of side rails. Secure with supplied
.250−20 X .50 hex head screws.
6
Cooling System - Not Supplied
Secure Coolmatet 1.3 with supplied
.250-20 x .50 hex head screws
Secure Coolmate 3.5 with supplied
.312-18 x .75 hex head screws
7
8
1
Cart
Welding Power Source - Not
Supplied
Secure Dynasty or Maxstar 350/700
(power source only) with supplied
.375-16 x .75 hex head screws.
8
1
2
3
4
7
8
2
3
4
5
6
7
Runner Cart For Maxstar/Dynasty 350/700
Tools Needed:
3/8 in.
6
5
Small Runner Cart For Maxstar/Dynasty 280
804 874-D
OM-232 455 Page 3
1-4. Cart Parts List
. Hardware is common and
not available unless listed.
3
4
2
6
5
7
1
9
8
10
19
12
11
13
18
15
804 872-C
Figure 1-1. Complete Assembly For 230 157
Item
No.
Dia.
Mkgs.
Part
No.
230 157
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
9
10
11
12
13
15
18
19
. . . . . . . . . . . . . 255 894
. . . . . . . . . . . . +226 929
. . . . . . . . . . . . . 210 224
. . . . . . . . . . . . . 255 895
. . . . . . . . . . . . . 192 236
. . . . . . . . . . . . +226 930
. . . . . . . . . . . . . 199 403
. . . . . . . . . . . . . 191 875
. . . . . . . . . . . . . 255 893
. . . . . . . . . . . . . 255 896
. . . . . . . . . . . . . 602 250
. . . . . . . . . . . . . 209 869
. . . . . . . . . . . . . 121 614
. . . . . . . . . . . . . 226 923
. . . . . . . . . . . . . 255 892
. . . . . . . . . . . . . 235 506
Description
Quantity
Figure 1-1 Complete Cart Assembly.
....
....
....
....
....
....
....
....
....
....
....
....
....
....
....
....
Handle, Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel, Side Rail LH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chain, Straight Link 1/0 X 27 Bright Zinc Pld . . . . . . . . . . . . . . . . . . . . .
Support, Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Label, Caution Over Turning Can Cause Injury . . . . . . . . . . . . . . . . . . . . .
Panel, Side Rail RH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Holder, Foot Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hanger, Cable/Torch
.........................................
Base, Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tray, Bottle Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washer, Flat .812 ID x 1.469 OD x .134t Stl Pld Ansi .750 . . . . . . . . . .
Wheel, Poly−olefin 10 In Diax 2.000 wide x .750 . . . . . . . . . . . . . . . . . . .
Ring, Rtng Ext .750 Shaft X .085 Thk E Style Pld . . . . . . . . . . . . . . . . . .
Caster, Swvl 4.00 In Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base, Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
2
1
1
3
1
1
2
2
2
2
1
2
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
OM-232 455 Page 4
. Hardware is common and
not available unless listed.
5
4
2
7
3
15
1
6
16
14
12
8
9
10
11
13
805 491-A
Figure 1-2. Complete Assembly For 254 522
Item
No.
Dia.
Mkgs.
Part
No.
254 522
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
. . . . . . . . . . . . . 251 105
. . . . . . . . . . . . . 251 106
. . . . . . . . . . . . . 210 224
. . . . . . . . . . . . . 251 104
. . . . . . . . . . . . . 200 285
. . . . . . . . . . . . . 199 403
. . . . . . . . . . . . . 191 875
. . . . . . . . . . . . . 251 101
. . . . . . . . . . . . . 251 102
. . . . . . . . . . . . . 602 250
. . . . . . . . . . . . . 209 869
. . . . . . . . . . . . . 121 614
. . . . . . . . . . . . . 008 999
. . . . . . . . . . . . . 235 506
. . . . . . . . . . . . +251 107
. . . . . . . . . . . . . 251 103
Description
Quantity
Figure 1-2 Complete Cart Assembly.
....
....
....
....
....
....
....
....
....
....
....
....
....
....
....
....
Handle, Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rail, Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chain, Straight Link 1/0 X 27 Bright Zinc Pld . . . . . . . . . . . . . . . . . . . . .
Handle, Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Label, Warning Cylinder May Explode If Damaged . . . . . . . . . . . . . . . . .
Holder, Foot Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hanger, Cable/Torch
.........................................
Base, Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tray, Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washer, Flat .812 ID x 1.469 OD x .134t Stl Pld Ansi .750 . . . . . . . . . .
Wheel, Poly−olefin 10 In Diax 2.000 wide x .750 . . . . . . . . . . . . . . . . . . .
Ring, Rtng Ext .750 Shaft X .085 Thk E Style Pld . . . . . . . . . . . . . . . . . .
Caster, Swvl 4.00 In Polyolefin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bracket, Bottle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2
1
1
1
1
3
1
1
2
2
2
2
2
1
1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
OM-232 455 Page 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement