Miller | KE661065 | Owner Manual | Miller PSW-1020MT User manual

Miller PSW-1020MT User manual
OM-743
111 734E
October 1999
Processes
Resistance Spot
Welding
Description
PSW-1020MT
Visit our website at
www.MillerWelds.com
From Miller to You
Thank you and congratulations on choosing Miller. Now
you can get the job done and get it done right. We know
you don’t have time to do it any other way.
That’s why when Niels Miller first started building arc
welders in 1929, he made sure his products offered
long-lasting value and superior quality. Like you, his
customers couldn’t afford anything less. Miller products
had to be more than the best they could be. They had to
be the best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owner’s Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety precautions. They will
help you protect yourself against potential hazards on the worksite. We’ve
made installation and operation quick and easy.
With Miller you can count on years of reliable
service with proper maintenance. And if for
some reason the unit needs repair, there’s a
Troubleshooting section that will help you
Miller is the first welding figure out what the problem is. The parts list
equipment manufacturer in will then help you to decide which exact part
the U.S.A. to be registered to
the ISO 9001 Quality System you may need to fix the problem. Warranty and
Standard.
service information for your particular model
are also provided.
Miller Electric manufactures a full line
of welders and welding related equipment.
For information on other quality Miller
products, contact your local Miller distributor
to receive the latest full line catalog or
individual catalog sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller,
or visit us at www.MillerWelds.com on the web.
Working as hard as you do
– every power source from
Miller is backed by the most
hassle-free warranty in the
business.
Miller offers a Technical
Manual which provides
more detailed service and
parts information for your
unit. To obtain a Technical
Manual, contact your local
distributor. Your distributor
can also supply you with
Welding Process Manuals
such as SMAW, GTAW,
GMAW, and GMAW-P.
TABLE OF CONTENTS
SECTION 1 – SAFETY PRECAUTIONS - READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2. Resistance Spot Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3. Additional Symbols for Installation, Operation, and Maintenance . . . . . . . . . . . . . . . . . . . . . .
1-4. Principal Safety Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-5. EMF Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 2 – INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2. Installing or Cleaning Tongs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3. Coolant Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-4. Hanging Bracket Installation (Portable Models Only) (Optional) . . . . . . . . . . . . . . . . . . . . . . .
2-5. Connecting Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-6. Electrical Service Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-7. Adjusting Tong Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 3 – OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1. Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 4 – MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2. Overload Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3. Installing Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4. Dressing Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 5 – ELECTRICAL DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 6 – PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTIONS AND ACCESSORIES
WARRANTY
1
1
1
2
2
2
3
3
3
4
4
5
5
6
7
7
8
8
8
9
9
10
11
12
SECTION 1 – SAFETY PRECAUTIONS - READ BEFORE USING
spotom _nd_5/97
1-1. Symbol Usage
Means Warning! Watch Out! There are possible hazards
with this procedure! The possible hazards are shown in
the adjoining symbols.
Y Marks a special safety message.
. Means “Note”; not safety related.
This group of symbols means Warning! Watch Out! possible
ELECTRIC SHOCK, MOVING PARTS, and HOT PARTS hazards.
Consult symbols and related instructions below for necessary actions
to avoid the hazards.
1-2. Resistance Spot Welding Hazards
Y The symbols shown below are used throughout this manual to
call attention to and identify possible hazards. When you see
the symbol, watch out, and follow the related instructions to
avoid the hazard. The safety information given below is only
a summary of the more complete safety information found in
the Safety Standards listed in Section NO TAG. Read and follow all Safety Standards.
Y Only qualified persons should install, operate, maintain, and
repair this unit.
Y During operation, keep everybody, especially children, away.
D
D
D
D
D
SPOT WELDING can cause fire.
Sparks can fly off from the weld. The flying sparks,
hot workpiece, and hot equipment can cause fires,
burns, and explosions.
D
D
D
D
D
D
D
D
D
D
D
Protect yourself and others from flying sparks and hot metal.
Do not spot weld where flying sparks can strike flammable material.
Remove all flammables within 35 ft (10.7 m) of the weld. If this is not
possible, tightly cover them with approved covers.
Be alert that welding sparks can easily go through small cracks and
openings to adjacent areas.
Watch for fire, and keep a fire extinguisher nearby.
Do not spot weld on closed containers such as tanks or drums.
Do not weld where the atmosphere may contain flammable dust,
gas, or liquid vapors (such as gasoline).
Remove any combustibles, such as a butane lighter or matches,
from your person before doing any welding.
After completion of work, inspect area to ensure it is free of sparks,
glowing embers, and flames.
Do not exceed the equipment rated capacity.
Use only correct fuses or circuit breakers. Do not oversize or
bypass them.
D
D
D
D
D
FLYING SPARKS can cause injury.
Very often sparks fly off from the joint area.
D Wear approved face shield or safety goggles
with side shields.
D
D
ELECTRIC SHOCK can kill.
D
D
D
Touching live electrical parts can cause fatal shocks
or severe burns. The input power circuit and
machine internal circuits are also live when power is
on. Incorrectly installed or improperly grounded
equipment is a hazard.
Do not touch live electrical parts.
Wear dry, hole-free insulating gloves and body protection.
Disconnect input power before installing or servicing this equipment. Lockout/tagout input power according to OSHA 29 CFR
1910.147 (see Safety Standards).
Properly install and ground this equipment according to this manual
and national, state, and local codes.
Check and be sure that input power cord ground wire is properly
connected to ground terminal in disconnect box or that cord plug is
connected to a properly grounded receptacle outlet – always
double-check the supply ground before applying power.
When making input connections, attach the grounding conductor
first – double-check connections.
Keep cords dry, free of oil and grease, and protected from hot metal
and sparks.
Frequently inspect input power cord and ground conductor for damage or bare wiring – replace immediately if damaged – bare wiring
can kill. Check ground conductor for continuity.
Turn off all equipment when not in use.
For water-cooled equipment, check and repair or replace any leaking hoses or fittings. Do not use any electrical equipment if you are
wet or in a wet area.
Use only well-maintained equipment. Repair or replace damaged
parts at once.
Wear a safety harness if working above floor level.
Keep all panels, covers, and guards securely in place.
Wear protective garments such as oil-free, flame-resistant leather
gloves, heavy shirt, cuffless trousers, high shoes, and a cap.
Synthetic material usually does not provide such protection.
Protect others in nearby areas by using approved flame-resistant or
noncombustible fire curtains or shields. Have all nearby persons
wear safety glasses with side shields.
HOT METAL can cause burns.
Wear gloves or allow cooling period before servicing
tongs or tips.
D Always wear welding-type, insulated gloves
when using this equipment.
D
D
Do not touch workpiece, tips, or tongs with bare hands.
Allow tongs and tips to cool before touching.
OM-743 Page 1
D
D
D
D
MOVING PARTS can cause injury.
FUMES can be hazardous.
The tong tips, tongs, and linkages move during
operation.
Coatings, cleaners, paints, and platings can produce fumes when welded. Breathing these fumes
can be hazardous to your health.
Keep away from moving parts.
Keep away from pinch points.
Do not put hands between tips.
Keep all guards and panels securely in place.
D
D
D
D
D
Do not breathe the fumes.
If inside, ventilate the area and/or use exhaust at the weld to remove
fumes.
In confined spaces, use an approved air-supplied respirator.
Do not weld on coated metals, such as galvanized, lead, or cadmium plated steel, unless the coating is removed from the weld
area, the area is well ventilated, or if necessary, while wearing an
air-supplied respirator. The coatings and any metals containing
these elements can give off toxic fumes if welded.
Read the Material Safety Data Sheets (MSDSs) and the manufacturer’s instructions for metals, coatings, and cleaners.
1-3. Additional Symbols for Installation, Operation, and Maintenance
FIRE OR EXPLOSION hazard.
D Do not install or place unit on, over, or near
combustible surfaces.
D Do not install or operate unit near flammables.
D Do not overload building wiring – be sure power supply system is
properly sized, rated, and protected to handle this unit.
FALLING EQUIPMENT can cause injury.
D Use equipment of adequate capacity to lift the
unit.
D Have two people of adequate physical strength
lift portable units.
MAGNETIC FIELDS can affect pacemakers.
D Pacemaker wearers keep away.
D Wearers should consult their doctor before going near resistance spot welding operations.
OVERUSE can cause OVERHEATING.
D Allow cooling period; follow rated duty cycle.
D Reduce duty cycle before starting to weld
again.
D Secure unit during transport so it cannot tip or fall.
FLYING METAL or DIRT can injure eyes.
D Wear approved safety glasses with side
shields or wear face shield.
1-4. Principal Safety Standards
Safety in Welding and Cutting, ANSI Standard Z49.1, from American
Welding Society, 550 N.W. LeJeune Rd, Miami FL 33126
Safety and Health Standards, OSHA 29 CFR 1910, from Superintendent of Documents, U.S. Government Printing Office, Washington, D.C.
20402.
National Electrical Code, NFPA Standard 70, from National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
Code for Safety in Welding and Cutting, CSA Standard W117.2, from
Canadian Standards Association, Standards Sales, 178 Rexdale Boulevard, Rexdale, Ontario, Canada M9W 1R3.
Safe Practices For Occupation And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
1430 Broadway, New York, NY 10018.
Cutting And Welding Processes, NFPA Standard 51B, from National
Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
1-5. EMF Information
Considerations About Welding And The Effects Of Low Frequency
Electric And Magnetic Fields
Welding current will cause electromagnetic fields. There has been and
still is some concern about such fields. However, after examining more
than 500 studies spanning 17 years of research, a special blue ribbon
OM-743 Page 2
committee of the National Research Council concluded that: “The body
of evidence, in the committee’s judgment, has not demonstrated that
exposure to power-frequency electric and magnetic fields is a humanhealth hazard.” However, studies are still going forth and evidence
continues to be examined.
SECTION 2 – INSTALLATION
2-1. Specifications
AC Input
Voltage
50/60 Hz
1-Phase
Input
Amperage
Work Capacity Combined
Thickness Mild Steel
Rated Output
At 50% Duty
Cycle*
Tong
Length
Output Amps
±10%
6 in (152 mm)
9500
220
45
3/16 in
(4.7 mm)
10 kVA
12 in (305 mm)
7500
18 in (457 mm)
6500
Weight
Net
Ship
140 lb
(64 kg)
195 lb
(88 kg)
*Based on 10 second time period; means unit can weld for 5 seconds out of each 10 second time period.
2-2. Installing or Cleaning Tongs
Y Turn off welder and disconnect input power.
6
. Be sure tong ends are clean
and not corroded before installing. Clean tongs with fine steel
wool.
Bottom Tong Installation:
3
1
Spatter Guard
2
Insulating Strip
Check to see that insulating strip is
not cracked.
2
Y Electric shock hazard and
possible transformer damage from incorrect part. Do
not replace polyester glass
insulating strip with a metal
strip – use only proper parts
from Parts List.
4
1
3
7
Setscrew
Loosen setscrew.
4
Cam Nut
Turn nut counterclockwise to release pressure on bottom tong.
5
5
Bottom Tong
Slide tong into bottom tong holder
as far as possible, and position so
that tip is pointing straight up.
Turn cam nut clockwise to secure
tong in holder.
Tighten setscrew to lock cam in
place.
Top Tong Installation:
6
Tong Alignment
7
7
7
Top Tong
8
Tips
Slide tong into top tong holder as far
as necessary, so that tip mates with
bottom tip when tongs are closed.
8
8
Top Tong Securing Screws
Loosen the four screws.
Adjust tong positions to line up centers of tips as shown.
5
Tighten securing screws to lock
tong in place.
5
Front View
Tools Needed:
Side View
3/16 in
Fine
Steel
Wool
9/16 in
Ref. ST-801 528 / ST-801 436 / Ref. ST-800 154-A
OM-743 Page 3
2-3. Coolant Connections
1
Tong Coolant Hose
2
Hose Clamp
3
Barbed Fitting
4
Coolant-In Fitting
5
Coolant-Out Tube
6
Coolant Hoses (Customer
Supplied)
Install hoses as shown.
. This
1
2
unit is equipped with a
water control pressure switch
to insure proper cooling. If
there is not enough pressure to
close the switch, the unit will
not weld. For proper operation,
coolant supply must have a
minimum pressure of 30 psi
(207 kPa), a maximum temperature of 86° F (30° C), and a
flow rate of 2.5 to 3 qt/min (2.4
to 2.8 L/min).
3
Obtain two hoses of desired length
with 5/16 in (7.9 mm) inside
diameter.
Connect hoses as shown, and secure with hose clamps.
5
4
6
Tools Needed:
5/8 in
Ref. ST-801 526 / Ref. ST-800 142
2-4. Hanging Bracket Installation (Portable Models Only) (Optional)
1
Hanging Bracket
2
Mounting Hardware
Remove and retain hardware from
transformer housing.
3
Install bracket to transformer
housing, and secure with existing
hardware as shown.
1
3
Tools Needed:
Eye Bolt With Hardware
2
9/16 in
Ref. ST-112 810-E
OM-743 Page 4
2-5. Connecting Input Power
Have only qualified persons make
this installation.
Remove left side panel of control
box.
GND/
PE
1
Connect
GND/PE
Conductor First
1
Line Disconnect Device
2
Input And Grounding Conductors
Select size and length using Section 2-6.
3
Power Switch
4
Line Terminals
5
Ground Terminal
6
Connect conductors as shown to
deenergized
line
disconnect
device.
L2
Reinstall side panel.
L1
6
Overcurrent Protection
(Fuses Shown)
Select type and size using Section
2-6.
2
Tools Needed:
7/16 in
4
3
L1
L2
5
GND/
PE
ssb2.4* 1/94 – Ref. ST-113 034-B / ST-113 030-B / Ref. ST-801 529
2-6. Electrical Service Guide
Input Voltage
220
Input Amperes At Rated Output
45
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes
80
Min Input Conductor Size In AWG/Kcmil
6
Max Recommended Input Conductor Length In Feet (Meters)
Min Grounding Conductor Size In AWG/Kcmil
93 (28)
10
Reference: 1996 National Electrical Code (NEC)
OM-743 Page 5
2-7. Adjusting Tong Pressure
1
1
Operating Lever
2
Weld Actuator Button And
Start Switch
3
Top Nut
2
3
4
Bottom Nut
5
Tongs
4
Tools Needed:
3/4 in
5
. Tong pressure must be checked and/or set before operation. Correct tong pressure is necessary
to create a quality weld and to prevent damage to tips.
Too much tong pressure causes the weld nugget to dimple and material to splash out around the
nugget area.
If tong pressure is too weak, parts are loose when the tongs are closed, severe arcing occurs between workpieces, and no weld can be made.
Step 1
Ref. ST-800 527
Step 2
Step 3
No Weld
Loosen both nuts and push
tips together.
Begin to tighten top nut. This causes
tips to open. Stop when opening
is a little less than thickness of material
to be welded. Tighten bottom nut.
Step 4
Set controls
(see Section 3-1).
Step 5
Weld
Place material to be welded between tong tips,
and press operating lever (see Section 3-1)
to close tongs. Release operating lever.
Step 6
If tong pressure appears correct, place weld actuator
button in the Weld position, and try a sample weld
according to Section 3-1.
Step 7
Step 8
No Weld
Set controls. If tong pressure is
correct, stop here. If further adjustment
is required, go to next step.
OM-743 Page 6
To INCREASE tong pressure, loosen top
nut 1/4 turn. Tighten bottom
nut. Turn Power on, and go to Step 4.
To DECREASE tong pressure, loosen
bottom nut 1/4 turn. Tighten top nut.
Turn Power on, and go to Step 4.
SECTION 3 – OPERATION
3-1. Controls
1
Weld Time Control
Select spot weld time from 0 to 9.99
seconds by turning the knobs.
Weld time begins when the Start
switch is pressed.
2
Weld Current Control
Turn clockwise to increase current.
Changing the weld current value
does not affect the duty cycle rating.
The scale is for reference only.
3
1
Operating Lever
Press operating lever to press Start
Switch and start weld cycle.
4
Power Switch And Pilot Light
5
Weld Actuator Button
Press and turn button left or right 90
degrees to change positions.
4
2
3
5
Closing the operating lever presses
the Start Switch. This starts weld
time and energizes the contactor,
providing weld current. Weld current may be stopped at any time by
releasing the operating lever, which
opens the Start Switch. When the
Start switch opens, weld current
stops, and the Weld Time control
automatically resets for another
weld cycle.
ST-113 030-B / Ref. ST-801 525
OM-743 Page 7
SECTION 4 – MAINTENANCE AND TROUBLESHOOTING
-1. Maintenance
Y Disconnect power before maintaining.
. During heavy service, maintain monthly.
3 Months
Inspect
tips.
Oil unit.
Replace damaged
or unreadable
labels.
4-2. Overload Protection
Y Turn Off unit.
Fuses F1 and F2 protect the control
circuitry.
If either fuse opens, the unit shuts
down. To replace a fuse, proceed
as shown:
1
2
Fuse Holder Cover
Fuse (See Parts List)
1
2
Ref. ST-113 030 / Ref. ST-800 185-A
OM-743 Page 8
4-3. Installing Tips
1
2
Tip
Telescoping Tube
Removal:
Tips have a Morse Taper and a
press fit.
. Use a vice grip pliers to rotate
and loosen tips. Once loose,
pull tips straight out.
1
Y Do not move tips from side to
side when removing or telescoping tube will snap off.
Installation:
2
Coat taper area of tip with pipe
sealant compound. Pull telescoping tube all the way up, but not
out. Use a plastic or leather
hammer to tap tip into seat. Run
water through tong to check for
leaks.
Repeat if necessary.
Tools Needed:
ST-801 437
4-4. Dressing Tips
1
2
3
New Tip
Used Tip Requiring Dressing
Dressing Method – Keep top
diameter same as a new tip.
d = 3/16–1/4 in (4.8–6.4 mm)
diameter
1
d
d
3
2
Tools Needed:
OR
OM-743 Page 9
4-5. Troubleshooting
Trouble
No weld output; pilot light Off.
Remedy
Check line fuses, and replace if necessary (see Section 2-5).
Check fuse(s) F1 and/or F2, and replace if necessary (see Section 4-2).
Turn On power switch.
Check for proper coolant supply pressure (see Section 2.3).
Have Factory Authorized Service Station check contactor W.
Low weld output; pilot light On.
Dress or replace tips (see Section 4-3 and/or 4.4).
Remove and clean ends of tongs and tong holders (see Section 2-2).
Adjust tong pressure (see Section 2-7).
Longer than normal Weld Time required. Dress or replace tong tips (see Section 4-3 and/or 4.4).
Clean workpieces.
Adjust tong pressure (see Section 2-7).
Check input line voltage.
Burn through at point of weld.
Shorten weld time (see Section 3-1).
Adjust tong pressure (see Section 2-7).
Dress or replace tong tips (see Section 4-3 and/or 4.4).
Realign tips (see Section 2-2).
OM-743 Page 10
SECTION 5 – ELECTRICAL DIAGRAM
SB-128 144
Figure 5-1. Circuit Diagram
OM-743 Page 11
SECTION 6 – PARTS LIST
not available unless listed.
25
26
27
28
13
22
37
22
39
40
38
41
1
2
36
3
35
34
4
33
5
6
32
7
31
8
30
29
13
12
9
10
11
8
24
22
21
20
19
23
18
16
17
12
14
15
17
16
. Hardware is common and
ST-112 610-E
Figure 6-1. Main Assembly
OM-743 Page 12
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 6-1. Main Assembly
. . . 1 . . . . . . . . . . . . . 019 651
. . . 2 . . . . PB1 . . . . . 011 749
. . . . . . . . . . . . . . . . . . . 027 948
. . . . . . . . . . . . . . . . . . . 010 660
. . . 3 . . . . . . . . . . . . . . 026 611
. . . 4 . . . . . . . . . . . . . . 110 531
. . . 5 . . . . . . . . . . . . . 010 351
. . . 6 . . . . . . . . . . . . . 017 672
. . . 7 . . . . . . . . . . . . . . 011 750
. . . 8 . . . . . . . . . . . . . 601 881
. . . 9 . . . . . . . . . . . . . 010 726
. . . 10 . . . . . . . . . . . . . 010 736
. . . 11 . . . . . . . . . . . . . 010 737
. . . 12 . . . . . . . . . . . . . 010 738
. . . 13 . . . . . . . . . . . . . 601 854
. . . 14 . . . . . . . . . . . . . . 110 510
. . . 15 . . . . . . . . . . . . . 605 181
. . . 16 . . . . . . . . . . . . . 605 209
. . . 17 . . . . . . . . . . . . . 602 213
. . . 18 . . . . . . . . . . . . +110 561
. . . . . . . . . . . . . . . . . . . 109 480
. . . 19 . . . . . . . . . . . . . 017 671
. . . 20 . . . . . . . . . . . . . 010 723
. . . 21 . . . . . . . . . . . . . 010 744
. . . 22 . . . . . . . . . . . . . . 601 117
. . . 23 . . . . . . . . . . . . . 010 724
. . . 24 . . . . . . . . . . . . . . 110 534
. . . 25 . . . . . . . . . . . . . . 110 530
. . . 26 . . . . . . . . . . . . . . 110 529
. . . 27 . . . . . . . . . . . . . . 110 533
. . . 28 . . . . . . . . . . . . . . 112 480
. . . 29 . . . . . . . . . . . . . . 110 536
. . . 30 . . . . . . . . . . . . . . 110 903
. . . 31 . . . . . . . . . . . . . . 110 535
. . . 32 . . . . . . . . . . . . . 010 719
. . . 33 . . . . . . . . . . . . . 602 317
. . . 34 . . . . . . . . . . . . . . 110 898
. . . 35 . . . . . . . . . . . . . . 110 532
. . . 36 . . . . T1 . . . . . 121 317
. . . 37 . . . . . . . . . . . . . . 112 664
. . . . . . . . . . . . . . . . . . . 026 295
. . . 38 . . . . . . . . . . . . . 010 739
. . . 39 . . . . . . . . . . . . . . 110 901
. . . 40 . . . . . . . . . . . . . 026 834
. . . 41 . . . . . . . . . . . . . 010 033
. . . . . . . . . . . . . . . . . . . 603 105
. . . . . . . . . . . . . . . . . . . . 111 028
. . . . . . . . . . . . . . . . . . . . 111 026
. . . . . . . . . . . . . . . . . . . 010 610
. . . . . . . . . . . . . . . . . . . 604 102
. . . . . . . . . . . . . . . . . . . 010 323
. . HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . SWITCH, PB SPST 3A 125V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . COLLAR, switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . PIN, spring 1/8 x 1-1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . TUBING, 7/8dia x 1-5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BAR, tong brd clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . PIN, spring 3/8 x 2 x 2-11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . LEVER, operating (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . PUSH BUTTON, switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . NUT, hex jam 1/2-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . SCREW, adj pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . TUBING, 5/8 OD x 12ga x 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BAR, linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . TUBING, 5/8 OD x 12ga x 1-3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . NUT, hex 3/8-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BOLT, eye stem 3/8 x 1-1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . NUT, slflkg hex 3/8-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . SCREW, cap hexhd 3/8-16 x 2-1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . WASHER, lock split 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BRACKET, hanging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . LABEL, warning falling equipment etc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . HOLDER, tong top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CLAMP, tong top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BAR, ton brd clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CLIP, jiffy 1/2 in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BRAID SET, ton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . SPLATTER BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . INSULATION, tong bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CLAMP, tong bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . STRIP, insulator polyest gl lam .125 x 2.750 x 3.312 . . . . . . . . . . . . . . . . .
. . SCREW, set skt hd 1/4-28 x 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CAM, tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . HOUSING, front transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CAM, pin tong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . STUD, stl .375-24 x 5.000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . PIN, spring 3/8 x 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . PIN, spring 1/4 x 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . BAR, tong brd clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . TRANSFORMER, pwr main (220V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CAP, transformer rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . STRIP, polyest gl lam .062 x 1.687 x 2.000 . . . . . . . . . . . . . . . . . . . . . . . . .
. . SHIELD, tube contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . TUBING, coolant secondary 5/16 OD x .032 x 3 . . . . . . . . . . . . . . . . . . . . .
. . TUBING, 5/16 ID x 7/16 OD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . STUD, 1/4-28 x 7-3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . HOSE, nprn brd No. 1 x .312 (order by ft) . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CABLE, pwr 12ft 6 in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CABLE, switch 13ft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CONNECTOR, clamp cable 1/2 in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CONNECTOR, clamp cable 1 in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . CLAMP, hose 1/4 x 5/8dia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
2
1
1
2
1
2
2
4
2
1
1
2
3
1
1
1
1
1
5
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
2
4
7ft
1
1
1
1
8
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-743 Page 13
. Hardware is common and
17
16
14
27
26
28
4
5
4
1
2
25
3
24
6
23
7
8
22
9
21
20
11
19
18
14
15
12
10
13
not available unless listed.
ST-113 016-B
Figure 6-2. Control Box
OM-743 Page 14
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 6-2. Control Box
. . . 1 . . . . . . . . . . . . . 010 476 . . BUSHING, strain relief 5/8 ID x .570mtg hole . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 2 . . . . . . . . . . . . . 604 102 . . CONNECTOR, clamp cable 1 in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 3 . . . . . . . . . . . . . . 110 563 . . CASE SECTION, front/top/rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . 603 105 . . HOSE, nprn brd No. 1 (order by ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12ft
. . . . . . . . . . . . . . . . . . . 010 323 . . CLAMP, hose .250-.625clp dia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 4 . . . . . . . . . . . . . 053 525 . . FITTING, brs barbed M 5/16tbg x 1/8NPT . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 5 . . . . . . . . . . . . . 602 965 . . FITTING, pipe brs tee 1/8NPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 6 . . . . . . . . . . . . . 049 469 . . HANDLE, carrying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 7 . . . . . . . . . . . . . 602 243 . . WASHER, flat stl std .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . 605 787 . . WASHER, lock stl int tooth .500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . 010 910 . . WASHER, flat stl SAE .375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 8 . . . . S3 . . . . . 151 969 . . SWITCH, pressure oil 4PSI No cont . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 9 . . . . . Z . . . . . . 110 897 . . REACTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 10 . . . . . . . . . . . . +110 542 . . PANEL, side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 11 . . . . . . . . . . . . . 035 049 . . LINK, connecting contactor term . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 12 . . . . . W . . . . . 034 909 . . CONTACTOR, 4P 115/230V (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . 034 910 . . . . COIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . *034 911 . . . . KIT, point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 13 . . . . TD1 . . . . 088 891 . . TIMER, digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 14 . . . . . . . . . . . . . 044 747 . . HOLDER, fuse crtg 30A 600V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 15 . . . . F1 . . . . . 128 430 . . FUSE, cartridge 1A 500V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 16 . . . . F2 . . . . . *012 633 . . FUSE, mintr gl 1A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 17 . . . . . . . . . . . . . 046 432 . . HOLDER, fuse mintr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 18 . . . . . . . . . . . . . 027 628 . . LENS, light ind red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 19 . . . . PL1 . . . . 027 629 . . BULB, incandescent slide base 120V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 20 . . . . . . . . . . . . . 027 631 . . HOUSING, light slide base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 21 . . . . . . . . . . . . . 097 926 . . KNOB, pointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 22 . . . . . . . . . . . . . . . . . . . . . . . . NAMEPLATE, (order by model and serial number) . . . . . . . . . . . . . . . . . . . 1
. . . 23 . . . . . . . . . . . . . . 110 562 . . PANEL, base cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 24 . . . . S2 . . . . . . 011 632 . . SWITCH, rotary 10 position 50A 300V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 25 . . . . S1 . . . . . 128 755 . . SWITCH, tgl DPST 40A 600VAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 26 . . . . . . . . . . . . . 143 140 . . LABEL, warning general precautionary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 27 . . . . . . . . . . . . . 070 371 . . BLANK, snap-in 1-1/8mtg hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . 28 . . . . T2 . . . . . 036 630 . . TRANSFORMER, control 100VA 230/460 . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*Recommended Spare Parts.
+When ordering a component originally displaying a precautionary label, the label should also be ordered.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-743 Page 15
No. 1 Morse Taper
040 218
040 219
040 220
041 003
041 004
041 005
No. 2 Morse Taper
90 deg
90 deg
90 deg
45 deg
45 deg
45 deg
6 inch
12 inch
18 inch
6 inch
12 inch
18 inch
90 deg
90 deg
45 deg
45 deg
041 000
041 001
040 294
040 296
12 inch
18 inch
6 inch
18 inch
TIPS
040 223
040 308
040 224
040 226
040 298
040 225
040 227
040 216
Pointed No. A-2407
Pointed No. A-2508
Offset No. D-2407
Offset No. SE-4270
Offset FA-24210-12 No. 1 Morse Taper
Offset FP-2523-7
AD-54-1 Adapter
OS-351
. Hardware is common and
not available unless listed.
9
8
6
4
5
7
1
3
2
ST-027 777-A
Figure 6-3. Tongs (Optional)
OM-743 Page 16
Quantity
Item
No.
Part
No.
Description
Holder
45 or 90
Deg
No. 1 Morse Taper
6”
12”
18”
No. 2 Morse Taper
6”
12”
18”
Figure 6-3. Tongs (Optional)
1
1
1
1
1
1
1
1
1
1
2
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
6
7
7
7
8
. . 027 778 . . TONG, 6 in (consisting of) . . . . . . . . . . . . . .
. . 027 777 . . TONG, 12 in (consisting of) . . . . . . . . . . . . .
. . 027 776 . . TONG, 18 in (consisting of) . . . . . . . . . . . . .
. . 027 781 . . TONG, 12 in (consisting of) . . . . . . . . . . . . .
. . 027 780 . . TONG, 18 in (consisting of) . . . . . . . . . . . . .
. . 027 770 . . TONG, 6 in (consisting of) . . . . . . . . . . . . . .
. . 027 769 . . TONG, 12 in (consisting of) . . . . . . . . . . . . .
. . 027 768 . . TONG, 18 in (consisting of) . . . . . . . . . . . . .
. . 027 774 . . TONG, 6 in (consisting of) . . . . . . . . . . . . . .
. . 027 772 . . TONG, 18 in (consisting of) . . . . . . . . . . . . .
. . . . . . . . . . . . . TIPS, (see chart)
. . 010 755 . . . . TUBE, telescoping . . . . . . . . . . . . . . . . . . .
. . 031 554 . . . . TUBE, telescoping . . . . . . . . . . . . . . . . . . .
. . 010 501 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 010 502 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 010 503 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 027 757 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 027 756 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 027 766 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 027 765 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 027 764 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 027 762 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 027 760 . . . . TUBE ASSEMBLY, tong (consisting of) .
. . 010 734 . . . . . . HOLDER, tip . . . . . . . . . . . . . . . . . . . . . .
. . 010 735 . . . . . . HOLDER, tip . . . . . . . . . . . . . . . . . . . . . .
. . 010 753 . . . . . . HOLDER, tip . . . . . . . . . . . . . . . . . . . . . .
. . 010 754 . . . . . . HOLDER, tip . . . . . . . . . . . . . . . . . . . . . .
. . 603 090 . . . . . . O-RING, .625 ID x .812 OD . . . . . . . . .
. . 010 498 . . . . TUBE, connecting 6 in tong . . . . . . . . . . .
. . 010 499 . . . . TUBE, connecting 12 in tong . . . . . . . . . .
. . 010 500 . . . . TUBE, connecting 18 in tong . . . . . . . . . .
. . 053 525 . . . . FITTING, brs-barbed M
5/16 tbg x 1/8NPT . . . . . . . . . . . . . . . . . . .
9 . . 010 758 . . . . FITTING, pipe-brs skt hd 3/8 NPT . . . . .
90 deg
90 deg
90 deg
90 deg
90 deg
45 deg
45 deg
45 deg
45 deg
45 deg
.... 2
........... 2
................. 2
.............................. 2
.................................... 2
.... 2
........... 2
................. 2
........................ 2
.................................... 2
90 deg . . . . 1 . . . . 1 . . . . 1 . . . . . . . . . . 1 . . .
45 deg . . . . 1 . . . . 1 . . . . 1 . . . . 1 . . . . . . . . . .
90 deg . . . . 1
90 deg . . . . . . . . . . . 1
90 deg . . . . . . . . . . . . . . . . . 1
90 deg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
90 deg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45 deg . . . . 1
45 deg . . . . . . . . . . . 1
45 deg . . . . . . . . . . . . . . . . . 1
45 deg . . . . . . . . . . . . . . . . . . . . . . . . 1
45 deg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90 deg . . . . 1 . . . . 1 . . . . 1
90 deg . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1 . . .
45 deg . . . . 1 . . . . 1 . . . . 1
45 deg . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . 1 . . .
All . . . . . . . . 1 . . . . 1 . . . . 1 . . . . 1 . . . . 1 . . .
All . . . . . . . . 1 . . . . . . . . . . . . . . . . . 1
All . . . . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . . . 1
All . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . . . . . . . .
1
1
1
1
1
1
1
1
All . . . . . . . . 2 . . . . 2 . . . . 2 . . . . 2 . . . . 2 . . . 2
All . . . . . . . . 1 . . . . 1 . . . . 1 . . . . 1 . . . . 1 . . . 1
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-743 Page 17
Notes
OM-743 Page 18
Effective January 1, 2000
(Equipment with a serial number preface of “LA” or newer)
This limited warranty supersedes all previous Miller warranties and is exclusive with no other
guarantees or warranties expressed or implied.
Warranty Questions?
Call
1-800-4-A-MILLER
for your local
Miller distributor.
Your distributor also gives
you ...
Service
You always get the fast,
reliable response you
need. Most replacement
parts can be in your
hands in 24 hours.
Support
Need fast answers to the
tough welding questions?
Contact your distributor.
The expertise of the
distributor and Miller is
there to help you, every
step of the way.
*
LIMITED WARRANTY – Subject to the terms and conditions
below, Miller Electric Mfg. Co., Appleton, Wisconsin, warrants
to its original retail purchaser that new Miller equipment sold
after the effective date of this limited warranty is free of defects
in material and workmanship at the time it is shipped by Miller.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS.
Within the warranty periods listed below, Miller will repair or
replace any warranted parts or components that fail due to
such defects in material or workmanship. Miller must be
notified in writing within thirty (30) days of such defect or
failure, at which time Miller will provide instructions on the
warranty claim procedures to be followed.
Miller shall honor warranty claims on warranted equipment
listed below in the event of such a failure within the warranty
time periods. All warranty time periods start on the date that
the equipment was delivered to the original retail purchaser, or
one year after the equipment is sent to a North American
distributor or eighteen months after the equipment is sent to an
International distributor.
1.
5 Years Parts – 3 Years Labor
*
*
2.
3 Years — Parts and Labor
*
*
*
*
*
*
3.
Original main power rectifiers
Inverters (input and output rectifiers only)
Transformer/Rectifier Power Sources
Plasma Arc Cutting Power Sources
Semi-Automatic and Automatic Wire Feeders
Inverter Power Supplies
Intellitig
Engine Driven Welding Generators
(NOTE: Engines are warranted separately by
the engine manufacturer.)
1 Year — Parts and Labor
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
DS-2 Wire Feeder
Motor Driven Guns (w/exception of Spoolmate
185 & Spoolmate 250)
Process Controllers
Positioners and Controllers
Automatic Motion Devices
RFCS Foot Controls
Induction Heating Power Sources
Water Coolant Systems
HF Units
Grids
Maxstar 140
Spot Welders
Load Banks
Miller Cyclomatic Equipment
Running Gear/Trailers
Plasma Cutting Torches (except APT & SAF
Models)
Field Options
(NOTE: Field options are covered under True
Blue for the remaining warranty period of the
product they are installed in, or for a minimum of
one year — whichever is greater.)
4.
6 Months — Batteries
5.
90 Days — Parts
*
*
MIG Guns/TIG Torches
Induction Heating Coils and Blankets
*
*
*
*
*
APT, ZIPCUT & PLAZCUT Model Plasma Cutting
Torches
Remote Controls
Accessory Kits
Replacement Parts (No labor)
Spoolmate 185 & Spoolmate 250
Canvas Covers
Miller’s True Blue Limited Warranty shall not apply to:
1.
Consumable components; such as contact tips,
cutting nozzles, contactors, brushes, slip rings,
relays or parts that fail due to normal wear.
2.
Items furnished by Miller, but manufactured by others,
such as engines or trade accessories. These items are
covered by the manufacturer’s warranty, if any.
3.
Equipment that has been modified by any party other
than Miller, or equipment that has been improperly
installed, improperly operated or misused based upon
industry standards, or equipment which has not had
reasonable and necessary maintenance, or equipment
which has been used for operation outside of the
specifications for the equipment.
MILLER PRODUCTS ARE INTENDED FOR PURCHASE
AND USE BY COMMERCIAL/INDUSTRIAL USERS AND
PERSONS TRAINED AND EXPERIENCED IN THE USE
AND MAINTENANCE OF WELDING EQUIPMENT.
In the event of a warranty claim covered by this warranty, the
exclusive remedies shall be, at Miller’s option: (1) repair; or (2)
replacement; or, where authorized in writing by Miller in
appropriate cases, (3) the reasonable cost of repair or
replacement at an authorized Miller service station; or (4)
payment of or credit for the purchase price (less reasonable
depreciation based upon actual use) upon return of the goods
at customer’s risk and expense. Miller’s option of repair or
replacement will be F.O.B., Factory at Appleton, Wisconsin, or
F.O.B. at a Miller authorized service facility as determined by
Miller. Therefore no compensation or reimbursement for
transportation costs of any kind will be allowed.
TO THE EXTENT PERMITTED BY LAW, THE REMEDIES
PROVIDED HEREIN ARE THE SOLE AND EXCLUSIVE
REMEDIES. IN NO EVENT SHALL MILLER BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF
PROFIT), WHETHER BASED ON CONTRACT, TORT OR
ANY OTHER LEGAL THEORY.
ANY EXPRESS WARRANTY NOT PROVIDED HEREIN
AND ANY IMPLIED WARRANTY, GUARANTY OR
REPRESENTATION AS TO PERFORMANCE, AND ANY
REMEDY FOR BREACH OF CONTRACT TORT OR ANY
OTHER LEGAL THEORY WHICH, BUT FOR THIS
PROVISION,
MIGHT
ARISE
BY
IMPLICATION,
OPERATION OF LAW, CUSTOM OF TRADE OR COURSE
OF DEALING, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE, WITH RESPECT TO ANY AND ALL
EQUIPMENT FURNISHED BY MILLER IS EXCLUDED AND
DISCLAIMED BY MILLER.
Some states in the U.S.A. do not allow limitations of how long
an implied warranty lasts, or the exclusion of incidental,
indirect, special or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty
provides specific legal rights, and other rights may be
available, but may vary from state to state.
In Canada, legislation in some provinces provides for certain
additional warranties or remedies other than as stated herein,
and to the extent that they may not be waived, the limitations
and exclusions set out above may not apply. This Limited
Warranty provides specific legal rights, and other rights may
be available, but may vary from province to province.
miller_warr 7/00
Owner’s Record
Please complete and retain with your personal records.
Model Name
Serial/Style Number
Purchase Date
(Date which equipment was delivered to original customer.)
Distributor
Address
City
State
Zip
For Service
Call 1-800-4-A-Miller or see our website at www.MillerWelds.com
to locate a DISTRIBUTOR or SERVICE AGENCY near you.
Always provide Model Name and Serial/Style Number.
Contact your Distributor for:
Welding Supplies and Consumables
Options and Accessories
Personal Safety Equipment
Service and Repair
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Replacement Parts
Training (Schools, Videos, Books)
International Headquarters–USA
USA Phone: 920-735-4505 Auto-Attended
USA & Canada FAX: 920-735-4134
International FAX: 920-735-4125
Technical Manuals (Servicing Information
and Parts)
Circuit Diagrams
European Headquarters –
United Kingdom
Phone: 44 (0) 1204-593493
FAX: 44 (0) 1204-598066
Welding Process Handbooks
www.MillerWelds.com
Contact the Delivering Carrier for:
File a claim for loss or damage during
shipment.
For assistance in filing or settling claims,
contact your distributor and/or equipment
manufacturer’s Transportation Department.
PRINTED IN USA
 2000 Miller Electric Mfg. Co.
6/00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising