OWNER’S MANUAL
September 1993
FORM: OM-676B
Use above FORM number when ordering extra manuals.
Running Gear No. 24 (042 371) And No. 24K (042 615)
WARNING
ELECTRIC SHOCK can kill.
•
•
FALLING EQUIPMENT can cause injury
and damage.
Do not touch live electrical parts.
Stop engine before installing.
•
•
•
Use proper equipment to lift unit.
Use lifting forks long enough to extend out opposite
side of base.
Do not put any body part under unit while lifting.
miscwarn1.1 5/93
Running gear number follows description in parts list.
Be sure there is approximately 3/8 in (9.5 mm) clearance
between welding generator and the handle (11).
Item
No.
Part
No.
1
2
3
4
5
4
5
6
7
8
9
10
11
11
022 609
022 825
133 812
130 768
145 665
145 671
145 665
602 213
601 873
145 669
604 318
601 941
131 244
145 672
Description (Qty)
U-Bolt, 3/8-24 x 1 (4)
Wheel, 8 in (2)
Washer, 1 x 1-1/2 flat (4))
Axle, No. 24 (1)
· Retaining Ring, No. 24 (2)
Axle, No. 24K (1)
Retaining Ring, No. 24K (2)
Washer, 3/8 lock (8)
Nut, 3/8-24 (8)
Mounting Bracket (2)
Nut, 1/4-20 (2)
Screw, 1/4-20 x 1-3/4 (2)
Handle, No. 24 (1)
Handle, No. 24K (1)
Be sure to provide Model when ordering
replacement parts.
11
Remove paint from axle grooves (4)
before installing retaining rings (5).
1
2
10
6
3
9
7
8
3
4
5
Tools Needed:
3/8, 7/16, 5/8 in
ST-135 355-B / ST-800 227
Figure 1. Installing Running Gear No. 24 And No. 24K
">
