Miller | KJ000000 | Owner Manual | Miller RUNNING GEAR/CYLINDER RACK (043796) User manual

Miller RUNNING GEAR/CYLINDER RACK (043796) User manual
OWNER’S MANUAL
OMĆ698C
189 244C
October 2000
Running Gear/Cylinder Rack (043 796)
WARNING
ELECTRIC SHOCK can kill.
•
•
•
FALLING EQUIPMENT can cause injury
and damage, OVERSIZED CYLINDER
can cause tipping.
Do not touch live electrical parts.
Turn Off welding power source and input disconnect
device.
Disconnect input plug or power conductors from
deenergized supply BEFORE moving welding
power source.
•
•
•
•
CYLINDERS can explode if damaged.
•
•
•
Move unit with proper handcart.
If using a fork lift vehicle, secure unit on a skid.
Never lift unit with cylinder attached.
Maximum cylinder weight is 100 lb (45 kg).
Tools Needed:
Keep cylinders away from welding and other
electrical circuits.
Never touch cylinder with welding electrode.
Always secure cylinder to running gear, wall, or
other stationary support.
1/4, 3/8, 7/16, 1/2 in
Item Part
No. No.
7
Description (Qty)
1
189 041 Handle (1)
2
3
152 461 Nut, 250-20, wshr (2)
189 042 Pan, Base (1)
4
5
189 045 Tray, Pan (1)
602 154 Screw, 1/4-20 x .50 (6)
6
7
189 043 Support, Back (1)
137 653 Label, Warning (1)
8
9
602 387 Chain (1)
189 046 Tray, Bottle (1)
10 189 040 Axle (1)
6
11 090 693 Wheel, 8 in (2)
12 602 250 Washer, .812 ID flat (2)
13 121 614 Retaining Ring (2)
14 189 044 Pan Tray (1)
15 049 966 Screw, 1/4-20 x 1.50 (4)
16 192 097 Caster, 4 in (2)
8
Be sure to provide Model when ordering
replacement parts.
9
.
5
4
1
3
2
It is recommended that the welder be
secured so that it cannot fall off the
cart. Holes are provided in the base
pan (3) for use when tying down the
welder.
10
11
12
13
5
14
15
16
802 051-A / Ref. 802 052
Figure 1. Installing Running Gear/Cylinder Rack
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising