Miller | LJ005230 | Owner Manual | Miller TRAILBLAZER PRO 350 D User manual

Miller TRAILBLAZER PRO 350 D User manual
OM-4413
207 948K
2009−01
Processes
MIG (GMAW) Welding
Flux Cored (FCAW) Welding
Stick (SMAW) Welding
TIG (GTAW) Welding
Air Plasma Cutting and Gouging
with Spectrum Unit
Air Carbon Arc (CAC-A) Cutting
and Gouging
Description
Engine Driven Welding Generator
Trailblazer Pro 350 D
File: Engine-Driven
Visit our website at
www.MillerWelds.com
From Miller to You
Thank you and congratulations on choosing Miller. Now you can get
the job done and get it done right. We know you don’t have time to do
it any other way.
That’s why when Niels Miller first started building arc welders in 1929,
he made sure his products offered long-lasting value and superior
quality. Like you, his customers couldn’t afford anything less. Miller
products had to be more than the best they could be. They had to be the
best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owner’s Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety precautions. They
will help you protect yourself against potential hazards on the worksite.
We’ve made installation and operation quick
and easy. With Miller you can count on years
of reliable service with proper maintenance.
And if for some reason the unit needs repair,
there’s a Troubleshooting section that will
help you figure out what the problem is. The
Miller is the first welding parts list will then help you to decide the
equipment manufacturer in exact part you may need to fix the problem.
the U.S.A. to be registered to
the ISO 9001:2000 Quality Warranty and service information for your
System Standard.
particular model are also provided.
Miller Electric manufactures a full line
of welders and welding related equipment.
For information on other quality Miller
products, contact your local Miller distributor to receive the latest full
line catalog or individual specification sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller, or visit us at
www.MillerWelds.com on the web.
Mil_Thank 4/05
Working as hard as you do
− every power source from
Miller is backed by the most
hassle-free warranty in the
business.
TABLE OF CONTENTS
SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3. Engine Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-4. Hydraulic Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-5. Compressed Air Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-6. Additional Symbols For Installation, Operation, And Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-7. California Proposition 65 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-8. Principal Safety Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-9. EMF Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1. Signification des symboles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2. Dangers relatifs au soudage à l’arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3. Dangers existant en relation avec le moteur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-4. Dangers liés à l’hydraulique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-5. Dangers liés à l’air comprimé . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-6. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la maintenance . . . . . .
2-7. Proposition californienne 65 Avertissements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-8. Principales normes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-9. Information EMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 3 − DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1. Symbol Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 4 − SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1. Weld, Power, And Engine Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2. Dimensions, Weights, and Operating Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-3. Fuel Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4. Duty Cycle And Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-5. AC Generator Power Curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6. CC Stick Volt-Ampere Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-7. CC TIG Volt-Ampere Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8. DC/CV MIG Volt-Ampere Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 5 − INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-1. Installing Welding Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-3. Rating Label Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4. Engine Prestart Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-5. Adding Coolant To Radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-6. Connecting The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-7. Installing Exhaust Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-8. Operating Engine Block Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-9. Connecting To Weld Output Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-10. Selecting Weld Cable Sizes* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-11. Remote 14 Receptacle RC4 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-12. Guidelines For Installing Customer-Supplied Emergency Air Shutdown Valve . . . . . . . . . . . . . . . . . . .
SECTION 6 − OPERATING WELDING GENERATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-1. Controls (See Section 6-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-2. Description Of Controls (See Section 6-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-3. Process/Contactor Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-4. Remote Voltage/Amperage Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5. Recommendations For Extreme Cold Weather Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-6. Typical Stick Welding Connections And Control Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-7. Typical MIG Welding Connections And Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-8. Typical MIG Connections And Settings Using Weld Control And Spoolgun . . . . . . . . . . . . . . . . . . . . . .
1
1
1
3
3
4
5
6
6
6
7
7
7
9
10
11
12
13
13
14
15
15
15
15
16
16
17
17
18
19
20
21
21
22
23
24
24
25
25
26
27
27
28
29
29
30
31
32
33
34
35
37
TABLE OF CONTENTS
6-9. Typical DC Scratch Start TIG Connections And Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-10. Typical AC TIG (With High Frequency Unit) Connections And Settings . . . . . . . . . . . . . . . . . . . . . . . . .
6-11. Typical Carbon Arc Cutting (CAC-A) Connections And Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 7 − OPERATING AUXILIARY EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-1. Generator Power Receptacles And Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-2. Wiring Instructions For Optional 240 Volt, Single-Phase Plug (NEMA 14-50P) . . . . . . . . . . . . . . . . . . .
SECTION 8 − MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-1. Maintenance Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-2. Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-3. Servicing Optional Spark Arrestor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-4. Servicing Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-5. Servicing Engine Lubrication And Fuel Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-6. Servicing Engine Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-7. Replacing Throttle Solenoid TS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-8. Adjusting Engine Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-9. Overload Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-10. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 9 − ELECTRICAL DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 10 − RUN-IN PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-1. Wetstacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-2. Run-In Procedure Using Load Bank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-3. Run-In Procedure Using Resistance Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 11 − GENERATOR POWER GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 12 − PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WARRANTY
38
39
40
41
41
42
43
43
44
45
46
47
48
49
50
51
52
56
58
58
59
60
61
68
SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING
rom_2008−08
Protect yourself and others from injury — read and follow these precautions.
1-1. Symbol Usage
DANGER! − Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained in the text.
NOTICE − Indicates statements not related to personal injury.
Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult symbols and related instructions below for necessary actions to avoid the
hazards.
1-2. Arc Welding Hazards
The symbols shown below are used throughout this manual
to call attention to and identify possible hazards. When you
see the symbol, watch out, and follow the related instructions
to avoid the hazard. The safety information given below is
only a summary of the more complete safety information
found in the Safety Standards listed in Section 1-8. Read and
follow all Safety Standards.
Only qualified persons should install, operate, maintain, and
repair this unit.
During operation, keep everybody, especially children, away.
ELECTRIC SHOCK can kill.
Touching live electrical parts can cause fatal shocks or
severe burns. The electrode and work circuit is
electrically live whenever the output is on. The input
power circuit and machine internal circuits are also live when power is
on. In semiautomatic or automatic wire welding, the wire, wire reel,
drive roll housing, and all metal parts touching the welding wire are
electrically live. Incorrectly installed or improperly grounded equipment is a hazard.
Do not touch live electrical parts.
Wear dry, hole-free insulating gloves and body protection.
Insulate yourself from work and ground using dry insulating mats
or covers big enough to prevent any physical contact with the work
or ground.
Do not use AC output in damp areas, if movement is confined, or if
there is a danger of falling.
Use AC output ONLY if required for the welding process.
If AC output is required, use remote output control if present on
unit.
Additional safety precautions are required when any of the following electrically hazardous conditions are present: in damp
locations or while wearing wet clothing; on metal structures such
as floors, gratings, or scaffolds; when in cramped positions such
as sitting, kneeling, or lying; or when there is a high risk of unavoidable or accidental contact with the workpiece or ground. For these
conditions, use the following equipment in order presented: 1) a
semiautomatic DC constant voltage (wire) welder, 2) a DC manual
(stick) welder, or 3) an AC welder with reduced open-circuit voltage. In most situations, use of a DC, constant voltage wire welder
is recommended. And, do not work alone!
Disconnect input power or stop engine before installing or
servicing this equipment. Lockout/tagout input power according to
OSHA 29 CFR 1910.147 (see Safety Standards).
Properly install and ground this equipment according to its
Owner’s Manual and national, state, and local codes.
Always verify the supply ground — check and be sure that input
power cord ground wire is properly connected to ground terminal in
disconnect box or that cord plug is connected to a properly
grounded receptacle outlet.
When making input connections, attach proper grounding conductor first − double-check connections.
Keep cords dry, free of oil and grease, and protected from hot metal
and sparks.
Frequently inspect input power cord for damage or bare wiring —
replace cord immediately if damaged — bare wiring can kill.
Turn off all equipment when not in use.
Do not use worn, damaged, undersized, or poorly spliced cables.
Do not drape cables over your body.
If earth grounding of the workpiece is required, ground it directly
with a separate cable.
Do not touch electrode if you are in contact with the work, ground,
or another electrode from a different machine.
Use only well-maintained equipment. Repair or replace damaged
parts at once. Maintain unit according to manual.
Do not touch electrode holders connected to two welding machines at the same time since double open-circuit voltage will be
present.
Wear a safety harness if working above floor level.
Keep all panels and covers securely in place.
Clamp work cable with good metal-to-metal contact to workpiece
or worktable as near the weld as practical.
Insulate work clamp when not connected to workpiece to prevent
contact with any metal object.
Do not connect more than one electrode or work cable to any
single weld output terminal.
SIGNIFICANT DC VOLTAGE exists in inverters after stopping engine.
Stop engine on inverter and discharge input capacitors according
to instructions in Maintenance Section before touching any parts.
HOT PARTS can cause severe burns.
Do not touch hot parts bare handed.
Allow cooling period before working on equipment.
To handle hot parts, use proper tools and/or wear heavy, insulated welding gloves and clothing to prevent burns.
FLYING METAL or DIRT can injure eyes.
Welding, chipping, wire brushing, and grinding
cause sparks and flying metal. As welds cool,
they can throw off slag.
Wear approved safety glasses with side shields even under your
welding helmet.
OM-4413 Page 1
FUMES AND GASES can be hazardous.
Welding produces fumes and gases. Breathing these
fumes and gases can be hazardous to your health.
Keep your head out of the fumes. Do not breathe the fumes.
If inside, ventilate the area and/or use local forced ventilation at the
arc to remove welding fumes and gases.
If ventilation is poor, wear an approved air-supplied respirator.
Read and understand the Material Safety Data Sheets (MSDSs)
and the manufacturer’s instructions for metals, consumables,
coatings, cleaners, and degreasers.
Work in a confined space only if it is well ventilated, or while
wearing an air-supplied respirator. Always have a trained watchperson nearby. Welding fumes and gases can displace air and
lower the oxygen level causing injury or death. Be sure the breathing air is safe.
Do not weld in locations near degreasing, cleaning, or spraying operations. The heat and rays of the arc can react with vapors to form
highly toxic and irritating gases.
Do not weld on coated metals, such as galvanized, lead, or
cadmium plated steel, unless the coating is removed from the weld
area, the area is well ventilated, and while wearing an air-supplied
respirator. The coatings and any metals containing these elements
can give off toxic fumes if welded.
Do not weld on closed containers such as tanks, drums, or pipes,
unless they are properly prepared according to AWS F4.1 (see
Safety Standards).
Do not weld where the atmosphere may contain flammable dust,
gas, or liquid vapors (such as gasoline).
Connect work cable to the work as close to the welding area as
practical to prevent welding current from traveling long, possibly
unknown paths and causing electric shock, sparks, and fire hazards.
Do not use welder to thaw frozen pipes.
Remove stick electrode from holder or cut off welding wire at
contact tip when not in use.
Wear oil-free protective garments such as leather gloves, heavy
shirt, cuffless trousers, high shoes, and a cap.
Remove any combustibles, such as a butane lighter or matches,
from your person before doing any welding.
After completion of work, inspect area to ensure it is free of sparks,
glowing embers, and flames.
Use only correct fuses or circuit breakers. Do not oversize or bypass them.
Follow requirements in OSHA 1910.252 (a) (2) (iv) and NFPA 51B
for hot work and have a fire watcher and extinguisher nearby.
NOISE can damage hearing.
BUILDUP OF GAS can injure or kill.
Noise from some processes or equipment can damage hearing.
Shut off shielding gas supply when not in use.
Always ventilate confined spaces or use approved air-supplied respirator.
Wear approved ear protection if noise level is
high.
MAGNETIC FIELDS can affect Implanted
Medical Devices.
ARC RAYS can burn eyes and skin.
Arc rays from the welding process produce intense
visible and invisible (ultraviolet and infrared) rays that
can burn eyes and skin. Sparks fly off from the weld.
Wear an approved welding helmet fitted with a proper shade of filter
lenses to protect your face and eyes from arc rays and sparks
when welding or watching (see ANSI Z49.1 and Z87.1 listed in
Safety Standards).
Wear approved safety glasses with side shields under your
helmet.
Use protective screens or barriers to protect others from flash,
glare, and sparks; warn others not to watch the arc.
Wear protective clothing made from durable, flame-resistant material (leather, heavy cotton, or wool) and foot protection.
WELDING can cause fire or explosion.
Welding on closed containers, such as tanks, drums,
or pipes, can cause them to blow up. Sparks can fly off
from the welding arc. The flying sparks, hot workpiece,
and hot equipment can cause fires and burns. Accidental contact of
electrode to metal objects can cause sparks, explosion, overheating,
or fire. Check and be sure the area is safe before doing any welding.
Remove all flammables within 35 ft (10.7 m) of the welding arc. If
this is not possible, tightly cover them with approved covers.
Do not weld where flying sparks can strike flammable material.
Protect yourself and others from flying sparks and hot metal.
Be alert that welding sparks and hot materials from welding can
easily go through small cracks and openings to adjacent areas.
Watch for fire, and keep a fire extinguisher nearby.
Be aware that welding on a ceiling, floor, bulkhead, or partition can
cause fire on the hidden side.
OM-4413 Page 2
Wearers of Pacemakers and other Implanted
Medical Devices should keep away.
Implanted Medical Device wearers should consult their doctor
and the device manufacturer before going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating
operations.
CYLINDERS can explode if damaged.
Shielding gas cylinders contain gas under high pressure. If damaged, a cylinder can explode. Since gas
cylinders are normally part of the welding process, be
sure to treat them carefully.
Protect compressed gas cylinders from excessive heat, mechanical shocks, physical damage, slag, open flames, sparks, and arcs.
Install cylinders in an upright position by securing to a stationary
support or cylinder rack to prevent falling or tipping.
Keep cylinders away from any welding or other electrical circuits.
Never drape a welding torch over a gas cylinder.
Never allow a welding electrode to touch any cylinder.
Never weld on a pressurized cylinder — explosion will result.
Use only correct shielding gas cylinders, regulators, hoses, and fittings designed for the specific application; maintain them and
associated parts in good condition.
Turn face away from valve outlet when opening cylinder valve.
Keep protective cap in place over valve except when cylinder is in
use or connected for use.
Use the right equipment, correct procedures, and sufficient number of persons to lift and move cylinders.
Read and follow instructions on compressed gas cylinders,
associated equipment, and Compressed Gas Association (CGA)
publication P-1 listed in Safety Standards.
1-3. Engine Hazards
BATTERY EXPLOSION can BLIND.
Always wear a face shield, rubber gloves, and
protective clothing when working on a battery.
Stop engine before disconnecting or connecting battery cables or servicing battery.
Do not allow tools to cause sparks when working on a battery.
Do not use welder to charge batteries or jump start vehicles.
Observe correct polarity (+ and −) on batteries.
Disconnect negative (−) cable first and connect it last.
FUEL can cause fire or explosion.
Stop engine and let it cool off before checking or
adding fuel.
Do not add fuel while smoking or if unit is near
any sparks or open flames.
Do not overfill tank — allow room for fuel to expand.
Do not spill fuel. If fuel is spilled, clean up before starting engine.
Dispose of rags in a fireproof container.
Always keep nozzle in contact with tank when fueling.
MOVING PARTS can injure.
Keep away from fans, belts, and rotors.
Keep all doors, panels, covers, and guards
closed and securely in place.
Stop engine before installing or connecting unit.
Have only qualified people remove doors, panels, covers, or
guards for maintenance and troubleshooting as necessary.
To prevent accidental starting during servicing, disconnect
negative (−) battery cable from battery.
Keep hands, hair, loose clothing, and tools away from moving
parts.
Reinstall doors, panels, covers, or guards when servicing is
finished and before starting engine.
Before working on generator, remove spark plugs or injectors to
keep engine from kicking back or starting.
Block flywheel so that it will not turn while working on generator
components.
EXHAUST SPARKS can cause fire.
Do not let engine exhaust sparks cause fire.
Use approved engine exhaust spark arrestor in
required areas — see applicable codes.
HOT PARTS can cause severe burns.
Do not touch hot parts bare handed.
Allow cooling period before working on equipment.
To handle hot parts, use proper tools and/or
wear heavy, insulated welding gloves and
clothing to prevent burns.
STEAM AND HOT COOLANT can burn.
If possible, check coolant level when engine is
cold to avoid scalding.
Always check coolant level at overflow tank, if
present on unit, instead of radiator (unless told
otherwise in maintenance section or engine
manual).
If the engine is warm, checking is needed, and there is no overflow tank, follow the next two statements.
Wear safety glasses and gloves and put a rag over radiator cap.
Turn cap slightly and let pressure escape slowly before
completely removing cap.
Using a generator indoors CAN KILL
YOU IN MINUTES.
Generator exhaust contains carbon monoxide.
This is a poison you cannot see or smell.
NEVER use inside a home or garage, EVEN IF
doors and windows are open.
Only use OUTSIDE and far away from windows, doors, and
vents.
BATTERY ACID can BURN SKIN and EYES.
Do not tip battery.
Replace damaged battery.
Flush eyes and skin immediately with water.
ENGINE HEAT can cause fire.
Do not locate unit on, over, or near combustible
surfaces or flammables.
Keep exhaust and exhaust pipes way from
flammables.
1-4. Hydraulic Hazards
HYDRAULIC EQUIPMENT can injure
or kill.
Incorrect installation or operation of this unit
could result in equipment failure and personal
injury. Only qualified persons should install, operate, and service this unit according to its
Owner’s Manual, industry standards, and national, state, and local codes.
Do not exceed the rated output or capacity of the hydraulic pump
or any equipment in the hydraulic system. Design hydraulic system so failure of any hydraulic component will not put people or
property at risk.
Before working on hydraulic system, turn off and lockout/tagout
unit, release pressure, and be sure hydraulic pressure cannot be
accidentally applied.
Do not work on hydraulic system with unit running unless you are a
qualified person and following the manufacturer’s instructions.
Do not modify or alter hydraulic pump or manufacturer-supplied
equipment. Do not disconnect, disable, or override any safety
equipment in the hydraulic system.
Use only components/accessories approved by the manufacturer.
Keep away from potential pinch points or crush points created by
equipment connected to the hydraulic system.
Do not work under or around any equipment that is supported only
by hydraulic pressure. Properly support equipment by mechanical
means.
OM-4413 Page 3
HYDRAULIC FLUID can injure or kill.
Before working on hydraulic system, turn off and
lockout/tagout unit, release pressure, and be sure
hydraulic pressure cannot be accidentally applied.
Relieve pressure before disconnecting or connecting hydraulic lines.
Check hydraulic system components and all connections and hoses for damage, leaks, and wear
before operating unit.
Wear protective equipment such as safety
glasses, leather gloves, heavy shirt and trousers,
high shoes, and a cap when working on hydraulic
system.
Use a piece of paper or cardboard to search for leaks−−never use
bare hands. Do not use equipment if leaks are found.
HYDRAULIC FLUID is FLAMMABLE−−do not work on hydraulics
near sparks or flames; do not smoke near hydraulic fluid.
Reinstall doors, panels, covers, or guards when servicing is
finished and before starting unit.
If ANY fluid is injected into the skin, it must be surgically removed
within a few hours by a doctor familiar with this type of injury or gangrene may result.
MOVING PARTS can injure.
Keep away from fans, belts and rotors.
Keep all doors, panels, covers, and guards
closed and securely in place.
Keep hands, hair, loose clothing, and tools away from moving
parts.
Before working on hydraulic system, turn off and lockout/tagout
unit, release pressure, and be sure hydraulic pressure cannot be
accidentally applied.
Have only qualified people remove guards or covers for maintenance and troubleshooting as necessary.
Reinstall doors, panels, covers, or guards when servicing is
finished and before starting engine.
HOT PARTS AND FLUID can cause severe
burns.
Do not touch hot parts bare handed or allow hot
fluid to contact skin.
Allow cooling period before working on equipment.
To handle hot parts, use proper tools and/or wear heavy, insulated welding gloves and clothing to prevent burns.
READ INSTRUCTIONS.
Read Owner’s Manual before installing, operating, or servicing unit.
Use only genuine replacement parts from the
manufacturer.
Perform maintenance and service according to the Owner’s
Manuals, industry standards, and national, state, and local
codes.
1-5. Compressed Air Hazards
COMPRESSED AIR EQUIPMENT can
injure or kill.
Incorrect installation or operation of this unit
could result in equipment failure and personal
injury. Only qualified persons should install, operate, and service this unit according to its
Owner’s Manual, industry standards, and national, state, and local codes.
Do not exceed the rated output or capacity of the compressor or
any equipment in the compressed air system. Design compressed air system so failure of any component will not put people
or property at risk.
Before working on compressed air system, turn off and lockout/
tagout unit, release pressure, and be sure air pressure cannot be
accidentally applied.
Do not work on compressed air system with unit running unless
you are a qualified person and following the manufacturer’s instructions.
Do not modify or alter compressor or manufacturer-supplied
equipment. Do not disconnect, disable, or override any safety
equipment in the compressed air system.
Use only components and accessories approved by the manufacturer.
Keep away from potential pinch points or crush points created by
equipment connected to the compressed air system.
Do not work under or around any equipment that is supported
only by air pressure. Properly support equipment by mechanical
means.
OM-4413 Page 4
COMPRESSED AIR can injure or kill.
Before working on compressed air system,
turn off and lockout/tagout unit, release pressure, and be sure air pressure cannot be accidentally applied.
Relieve pressure before disconnecting or connecting air lines.
Check compressed air system components
and all connections and hoses for damage,
leaks, and wear before operating unit.
Do not direct air stream toward self or others.
Wear protective equipment such as safety glasses, hearing protection, leather gloves, heavy shirt and trousers, high shoes, and
a cap when working on compressed air system.
Use soapy water or an ultrasonic detector to search for leaks−−
never use bare hands. Do not use equipment if leaks are found.
Reinstall doors, panels, covers, or guards when servicing is
finished and before starting unit.
If ANY air is injected into the skin or body seek medical help immediately.
BREATHING COMPRESSED AIR can injure or kill.
Do not use compressed air for breathing.
Use only for cutting, gouging, and tools.
MOVING PARTS can injure.
Keep away from fans, belts and rotors.
Keep all doors, panels, covers, and guards
closed and securely in place.
Keep hands, hair, loose clothing, and tools away from moving
parts.
Before working on compressed air system, turn off and lockout/
tagout unit, release pressure, and be sure air pressure cannot be
accidentally applied.
Have only qualified people remove guards or covers for maintenance and troubleshooting as necessary.
Reinstall doors, panels, covers, or guards when servicing is
finished and before starting engine.
TRAPPED AIR PRESSURE AND WHIPPING
HOSES can injure.
Release air pressure from tools and system before servicing, adding or changing attachments, or opening compressor oil drain or oil fill
cap.
HOT PARTS can cause severe burns.
Do not touch hot compressor or air system
parts.
Let system cool down before touching or servicing.
To handle hot parts, use proper tools and/or wear heavy, insulated welding gloves and clothing to prevent burns.
HOT METAL from air arc cutting and
gouging can cause fire or explosion.
Do not cut or gouge near flammables.
Watch for fire; keep extinguisher nearby.
READ INSTRUCTIONS.
Read Owner’s Manual before installing, operating, or servicing unit.
Use only genuine replacement parts from the
manufacturer.
Perform maintenance and service according to the Owner’s
Manuals, industry standards, and national, state, and local
codes.
1-6. Additional Symbols For Installation, Operation, And Maintenance
FIRE OR EXPLOSION hazard.
Do not install or place unit on, over, or near
combustible surfaces.
Do not install unit near flammables.
Do not overload building wiring − be sure power supply system is
properly sized, rated, and protected to handle this unit.
FALLING UNIT can cause injury.
Use lifting eye to lift unit and properly installed
accessories only, NOT gas cylinders. Do not
exceed maximum lift eye weight rating (see
Specifications).
Lift and support unit only with proper equipment
and correct procedures.
If using lift forks to move unit, be sure forks are long enough to
extend beyond opposite side of unit.
OVERHEATING can damage motors.
Turn off or unplug equipment before starting or
stopping engine.
Do not let low voltage and frequency caused by
low engine speed damage electric motors.
Do not connect 50 or 60 Hertz motors to the 100 Hertz receptacle
where applicable.
FLYING SPARKS can cause injury.
Wear a face shield to protect eyes and face.
Shape tungsten electrode only on grinder with
proper guards in a safe location wearing proper
face, hand, and body protection.
Sparks can cause fires — keep flammables away.
MOVING PARTS can cause injury.
Keep away from moving parts.
Keep away from pinch points such as drive
rolls.
WELDING WIRE can cause injury.
Do not press gun trigger until instructed to do
so.
Do not point gun toward any part of the body,
other people, or any metal when threading
welding wire.
OVERUSE can cause OVERHEATING.
Allow cooling period; follow rated duty cycle.
Reduce current or reduce duty cycle before
starting to weld again.
Do not block or filter airflow to unit.
STATIC (ESD) can damage PC boards.
Put on grounded wrist strap BEFORE handling
boards or parts.
Use proper static-proof bags and boxes to
store, move, or ship PC boards.
TILTING OF TRAILER can cause injury.
Use tongue jack or blocks to support weight.
Properly install welding generator onto trailer
according to instructions supplied with trailer.
READ INSTRUCTIONS.
Read Owner’s Manual before using or servicing unit.
Use only genuine replacement parts from the
manufacturer.
Perform maintenance and service according to the Owner’s
Manuals, industry standards, and national, state, and local
codes.
OM-4413 Page 5
H.F. RADIATION can cause interference.
High-frequency (H.F.) can interfere with radio
navigation, safety services, computers, and
communications equipment.
Have only qualified persons familiar with
electronic equipment perform this installation.
The user is responsible for having a qualified electrician
promptly correct any interference problem resulting from the
installation.
If notified by the FCC about interference, stop using the
equipment at once.
Have the installation regularly checked and maintained.
Keep high-frequency source doors and panels tightly shut, keep
spark gaps at correct setting, and use grounding and shielding to
minimize the possibility of interference.
ARC WELDING can cause interference.
Electromagnetic energy can interfere with
sensitive electronic equipment such as microprocessors, computers, and computer-driven
equipment such as robots.
Be sure all equipment in the welding area is
electromagnetically compatible.
To reduce possible interference, keep weld cables as short as
possible, close together, and down low, such as on the floor.
Locate welding operation 100 meters from any sensitive electronic equipment.
Be sure this welding machine is installed and grounded
according to this manual.
If interference still occurs, the user must take extra measures
such as moving the welding machine, using shielded cables,
using line filters, or shielding the work area.
1-7. California Proposition 65 Warnings
Welding or cutting equipment produces fumes or gases
which contain chemicals known to the State of California to
cause birth defects and, in some cases, cancer. (California
Health & Safety Code Section 25249.5 et seq.)
Battery posts, terminals and related accessories contain lead
and lead compounds, chemicals known to the State of
California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
For Gasoline Engines:
Engine exhaust contains chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm.
For Diesel Engines:
Diesel engine exhaust and some of its constituents are
known to the State of California to cause cancer, birth
defects, and other reproductive harm.
1-8. Principal Safety Standards
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
from Global Engineering Documents (phone: 1-877-413-5184, website:
www.global.ihs.com).
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping, American Welding Society Standard
AWS F4.1, from Global Engineering Documents (phone:
1-877-413-5184, website: www.global.ihs.com).
National Electrical Code, NFPA Standard 70, from National Fire Protection Association, P.O. Box 9101, Quincy, MA 02269-9101 (phone:
617-770-3000, website: www.nfpa.org and www. sparky.org).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 4221 Walney Road, 5th Floor,
Chantilly, VA 20151 (phone: 703-788-2700, website:www.cganet.com).
Code for Safety in Welding and Cutting, CSA Standard W117.2, from
Canadian Standards Association, Standards Sales, 5060 Mississauga,
Ontario, Canada L4W 5NS (phone: 800-463-6727 or in Toronto
416-747-4044, website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036–8002 (phone:
212-642-4900, website: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFPA Standard 51B, from National Fire Protection Association,
P.O. Box 9101, Quincy, MA 02269-9101 (phone: 617-770-3000, website: www.nfpa.org.
For Standards about hydraulic systems, contact the National Fluid
Power Association, Publications Department, 3333 North Mayfair
Road, Suite 211, Milwaukee, WI 53222-3219 (phone: (414) 778-3344,
website: www.nfpa.com).
OSHA, Occupational Safety and Health Standards for General Industry, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, from U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 Regional Offices—phone for
Region 5, Chicago, is 312-353-2220, website: www.osha.gov).
1-9. EMF Information
Considerations About Welding And The Effects Of Low Frequency
Electric And Magnetic Fields
Welding current, as it flows through welding cables, will cause electromagnetic fields. There has been and still is some concern about such
fields. However, after examining more than 500 studies spanning 17
years of research, a special blue ribbon committee of the National
Research Council concluded that: “The body of evidence, in the
committee’s judgment, has not demonstrated that exposure to powerfrequency electric and magnetic fields is a human-health hazard.”
However, studies are still going forth and evidence continues to be
examined. Until the final conclusions of the research are reached, you
may wish to minimize your exposure to electromagnetic fields when
welding or cutting.
To reduce magnetic fields in the workplace, use the following
procedures:
OM-4413 Page 6
1. Keep cables close together by twisting or taping them, or using a
cable cover.
2. Arrange cables to one side and away from the operator.
3. Do not coil or drape cables around your body.
4. Keep welding power source and cables as far away from
operator as practical.
5. Connect work clamp to workpiece as close to the weld as
possible.
About Implanted Medical Devices:
Implanted Medical Device wearers should consult their doctor and the
device manufacturer before performing or going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating operations.
If cleared by your doctor, then following the above procedures is recommended.
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT
UTILISATION
rom_2008−08fre
Se protéger, ainsi que toute autre personne travaillant sur les lieux, contre les étincelles et le métal chaud.
2-1. Signification des symboles
DANGER! − Indique une situation dangereuse qui si on
l’évite pas peut donner la mort ou des blessures graves.
Les dangers possibles sont montrés par les symboles
joints ou sont expliqués dans le texte.
Indique une situation dangereuse qui si on l’évite pas
peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou
sont expliqués dans le texte.
NOTE − Indique des déclarations pas en relation avec des blessures
personnelles.
Indique des instructions spécifiques.
Ce groupe de symboles veut dire Avertissement! Attention! DANGER
DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES
CHAUDES. Consulter les symboles et les instructions ci-dessous y
afférant pour les actions nécessaires afin d’éviter le danger.
2-2. Dangers relatifs au soudage à l’arc
Les symboles présentés ci-après sont utilisés tout au long du
présent manuel pour attirer votre attention et identifier les risques de danger. Lorsque vous voyez un symbole, soyez
vigilant et suivez les directives mentionnées afin d’éviter tout
danger. Les consignes de sécurité présentées ci-après ne
font que résumer l’information contenue dans les normes de
sécurité énumérées à la section 2-8. Veuillez lire et respecter
toutes ces normes de sécurité.
L’installation, l’utilisation, l’entretien et les réparations ne
doivent être confiés qu’à des personnes qualifiées.
Au cours de l’utilisation, tenir toute personne à l’écart et plus
particulièrement les enfants.
UN CHOC ÉLECTRIQUE peut tuer.
Un simple contact avec des pièces électriques peut
provoquer une électrocution ou des blessures graves.
L’électrode et le circuit de soudage sont sous tension
dès que l’appareil est sur ON. Le circuit d’entrée et les circuits
internes de l’appareil sont également sous tension à ce moment-là.
En soudage semi-automatique ou automatique, le fil, le dévidoir, le
logement des galets d’entraînement et les pièces métalliques en
contact avec le fil de soudage sont sous tension. Des matériels mal
installés ou mal mis à la terre présentent un danger.
Ne jamais toucher les pièces électriques sous tension.
Porter des gants et des vêtements de protection secs ne comportant pas de trous.
S’isoler de la pièce et de la terre au moyen de tapis ou d’autres
moyens isolants suffisamment grands pour empêcher le contact
physique éventuel avec la pièce ou la terre.
Ne pas se servir de source électrique à courant électrique dans les
zones humides, dans les endroits confinés ou là où on risque de
tomber.
Se servir d’une source électrique à courant électrique UNIQUEMENT si le procédé de soudage le demande.
Si l’utilisation d’une source électrique à courant électrique s’avère
nécessaire, se servir de la fonction de télécommande si l’appareil
en est équipé.
Des précautions de sécurité supplémentaires sont requises dans
des environnements à risque comme: les endroits humides ou
lorsque l’on porte des vêtements mouillés; sur des structures métalliques au sol, grillages et échafaudages; dans des positions
assises, à genoux et allongées; ou quand il y a un risque important
de contact accidentel avec la pièce ou le sol. Dans ces cas utiliser
les appareils suivants dans l’ordre de préférence: 1) un poste à
souder DC semi−automatique de type CV (MIG/MAG), 2) un poste
à souder manuel (électrode enrobée) DC, 3) un poste à souder
manuel AC avec tension à vide réduite. Dans la plupart des cas, un
poste courant continu de type CV est recommandé. Et, ne pas travailler seul!
Couper l’alimentation ou arrêter le moteur avant de procéder à
l’installation, à la réparation ou à l’entretien de l’appareil.
Déverrouiller l’alimentation selon la norme OSHA 29 CFR
1910.147 (voir normes de sécurité).
Installer et mettre à la terre correctement cet appareil conformément à son manuel d’utilisation et aux codes nationaux,
provinciaux et municipaux.
Toujours vérifier la terre du cordon d’alimentation − Vérifier et
s’assurer que le fil de terre du cordon d’alimentation est bien
raccordé à la borne de terre du sectionneur ou que la fiche du
cordon est raccordée à une prise correctement mise à la terre.
En effectuant les raccordements d’entrée fixer d’abord le conducteur de mise à la terre approprié et contre-vérifier les connexions.
Les câbles doivent être exempts d’humidité, d’huile et de graisse;
protégez−les contre les étincelles et les pièces métalliques chaudes.
Vérifier fréquemment le cordon d’alimentation pour voir s’il n’est
pas endommagé ou dénudé − remplacer le cordon immédiatement
s’il est endommagé − un câble dénudé peut provoquer une électrocution.
Mettre l’appareil hors tension quand on ne l’utilise pas.
Ne pas utiliser des câbles usés, endommagés, de grosseur insuffisante ou mal épissés.
Ne pas enrouler les câbles autour du corps.
Si la pièce soudée doit être mise à la terre, le faire directement
avec un câble distinct − ne pas utiliser le connecteur de pièce ou le
câble de retour.
Ne pas toucher l’électrode quand on est en contact avec la pièce,
la terre ou une électrode provenant d’une autre machine.
Ne pas toucher des porte électrodes connectés à deux machines
en même temps à cause de la présence d’une tension à vide doublée.
N’utiliser qu’un matériel en bon état. Réparer ou remplacer
sur-le-champ les pièces endommagées. Entretenir l’appareil
conformément à ce manuel.
Porter un harnais de sécurité quand on travaille en hauteur.
Maintenir solidement en place tous les panneaux et capots.
Fixer le câble de retour de façon à obtenir un bon contact métalmétal avec la pièce à souder ou la table de travail, le plus près possible de la soudure.
Isoler la pince de masse quand pas mis à la pièce pour éviter le
contact avec tout objet métallique.
Une tension DC importante subsiste à l’intérieur
des onduleurs après avoir coupé l’alimentation.
Couper l’alimentation du poste et décharger les condensateurs
d’entrée comme indiqué dans la Section Maintenance avant de
toucher des composants.
OM-4413 Page 7
DES PIÈCES CHAUDES peuvent
provoquer des brûlures graves.
Ne pas toucher à mains nues les parties chaudes.
Prévoir une période de refroidissement avant
de travailler à l’équipement.
Ne pas toucher aux pièces chaudes, utiliser les outils recommandés et porter des gants de soudage et des vêtements épais pour
éviter les brûlures.
DES PIECES DE METAL ou DES
SALETES peuvent provoquer
des blessures dans les yeux.
Le soudage, l’écaillement, le passage de la pièce à la brosse en
fil de fer, et le meulage génèrent des étincelles et des particules
métalliques volantes. Pendant la période de refroidissement des
soudures, elles risquent de projeter du laitier.
Porter des lunettes de sécurité avec écrans latéraux ou un écran
facial.
Porter un casque de soudage approuvé muni de verres filtrants
approprié pour protéger visage et yeux pendant le soudage
(voir ANSI Z49.1 et Z87.1 énuméré dans les normes de sécurité).
Porter des lunettes de sécurité avec écrans latéraux même sous
votre casque.
Avoir recours à des écrans protecteurs ou à des rideaux pour
protéger les autres contre les rayonnements les éblouissements
et les étincelles ; prévenir toute personne sur les lieux de ne pas
regarder l’arc.
Porter des vêtements confectionnés avec des matières résistantes et ignifuges (cuir, coton lourd ou laine) et des bottes de
protection.
LE SOUDAGE peut provoquer un
incendie ou une explosion.
Le soudage effectué sur des conteneurs fermés tels
que des réservoirs, tambours ou des conduites peut
provoquer leur éclatement. Des étincelles peuvent
être projetées de l’arc de soudure. La projection d’étincelles, des
pièces chaudes et des équipements chauds peut provoquer des
incendies et des brûlures. Le contact accidentel de l’électrode avec
des objets métalliques peut provoquer des étincelles, une explosion,
un surchauffement ou un incendie. Avant de commencer le soudage,
vérifier et s’assurer que l’endroit ne présente pas de danger.
LES FUMÉES ET LES GAZ peuvent être dangereux.
Déplacer toutes les substances inflammables à une distance de
10,7 m de l’arc de soudage. En cas d’impossibilité les recouvrir
soigneusement avec des protections homologués.
Le soudage génère des fumées et des gaz. Leur
inhalation peut être dangereux pour votre santé.
Ne pas souder dans un endroit là où des étincelles peuvent tomber
sur des substances inflammables.
Eloigner votre tête des fumées. Ne pas respirer les fumées.
À l’intérieur, ventiler la zone et/ou utiliser une ventilation forcée au
niveau de l’arc pour l’évacuation des fumées et des gaz de soudage.
Si la ventilation est médiocre, porter un respirateur anti-vapeurs
approuvé.
Lire et comprendre les spécifications de sécurité des matériaux
(MSDS) et les instructions du fabricant concernant les métaux, les
consommables, les revêtements, les nettoyants et les dégraisseurs.
Se protéger et d’autres personnes de la projection d’étincelles et
de métal chaud.
Des étincelles et des matériaux chauds du soudage peuvent
facilement passer dans d’autres zones en traversant de petites
fissures et des ouvertures.
Surveiller tout déclenchement d’incendie et tenir un extincteur à
proximité.
Le soudage effectué sur un plafond, plancher, paroi ou séparation
peut déclencher un incendie de l’autre côté.
Ne pas effectuer le soudage sur des conteneurs fermés tels que
des réservoirs, tambours, ou conduites, à moins qu’ils n’aient été
préparés correctement conformément à AWS F4.1 (voir les normes de sécurité).
Travailler dans un espace fermé seulement s’il est bien ventilé ou
en portant un respirateur à alimentation d’air. Demander toujours à
un surveillant dûment formé de se tenir à proximité. Des fumées et
des gaz de soudage peuvent déplacer l’air et abaisser le niveau
d’oxygène provoquant des blessures ou des accidents mortels.
S’assurer que l’air de respiration ne présente aucun danger.
Ne soudez pas si l’air ambiant est chargé de particules, gaz, ou vapeurs inflammables (vapeur d’essence, par exemple).
Ne pas souder dans des endroits situés à proximité d’opérations
de dégraissage, de nettoyage ou de pulvérisation. La chaleur et
les rayons de l’arc peuvent réagir en présence de vapeurs et former des gaz hautement toxiques et irritants.
Brancher le câble de masse sur la pièce le plus près possible de la
zone de soudage pour éviter le transport du courant sur une
longue distance par des chemins inconnus éventuels en provoquant des risques d’électrocution, d’étincelles et d’incendie.
Ne pas souder des métaux munis d’un revêtement, tels que l’acier
galvanisé, plaqué en plomb ou au cadmium à moins que le revêtement n’ait été enlevé dans la zone de soudure, que l’endroit soit
bien ventilé, et en portant un respirateur à alimentation d’air. Les
revêtements et tous les métaux renfermant ces éléments peuvent
dégager des fumées toxiques en cas de soudage.
Ne pas utiliser le poste de soudage pour dégeler des conduites gelées.
LES ACCUMULATIONS DE GAZ risquent de provoquer des blessures ou
même la mort.
Fermer l’alimentation du gaz protecteur en cas
de non utilisation.
Veiller toujours à bien aérer les espaces confinés ou se servir
d’un respirateur d’adduction d’air homologué.
LES RAYONS DE L’ARC peuvent
provoquer des brûlures dans les
yeux et sur la peau.
Le rayonnement de l’arc du procédé de soudage
génère des rayons visibles et invisibles intenses
(ultraviolets et infrarouges) susceptibles de provoquer des brûlures
dans les yeux et sur la peau. Des étincelles sont projetées pendant le
soudage.
OM-4413 Page 8
En cas de non utilisation, enlever la baguette d’électrode du porteélectrode ou couper le fil à la pointe de contact.
Porter des vêtements de protection dépourvus d’huile tels que des
gants en cuir, une chemise en matériau lourd, des pantalons sans
revers, des chaussures hautes et un couvre chef.
Avant de souder, retirer toute substance combustible de vos poches telles qu’un allumeur au butane ou des allumettes.
Une fois le travail achevé, assurez−vous qu’il ne reste aucune trace d’étincelles incandescentes ni de flammes.
Utiliser exclusivement des fusibles ou coupe−circuits appropriés.
Ne pas augmenter leur puissance; ne pas les ponter.
Suivre les recommandations dans OSHA 1910.252(a)(2)(iv) et
NFPA 51B pour les travaux à chaud et avoir de la surveillance et un
extincteur à proximité.
LE BRUIT peut affecter l’ouïe.
Le bruit des processus et des équipements peut
affecter l’ouïe.
Porter des protections approuvés pour les
oreilles si le niveau sonore est trop élevé.
LES CHAMPS MAGNETIQUES peuvent
affecter des implants médicaux.
Porteur de simulateur cardiaque ou autre implants médicaux, rester à distance.
Les porteurs d’implants doivent d’abord consulter leur médecin
avant de s’approcher des opérations de soudage à l’arc, de soudage par points, de gougeage, du coupage plasma ou de chauffage par induction.
Si des BOUTEILLES sont endommagées, elles pourront exploser.
Des bouteilles de gaz protecteur contiennent du gaz
sous haute pression. Si une bouteille est endommagée, elle peut exploser. Du fait que les bouteilles de gaz font
normalement partie du procédé de soudage, les manipuler avec
précaution.
Protéger les bouteilles de gaz comprimé d’une chaleur excessive,
des chocs mécaniques, des dommages physiques, du laitier, des
flammes ouvertes, des étincelles et des arcs.
Placer les bouteilles debout en les fixant dans un support stationnaire ou dans un porte-bouteilles pour les empêcher de tomber ou
de se renverser.
Tenir les bouteilles éloignées des circuits de soudage ou autres
circuits électriques.
Ne jamais placer une torche de soudage sur une bouteille à gaz.
Une électrode de soudage ne doit jamais entrer en contact avec
une bouteille.
Ne jamais souder une bouteille pressurisée − risque d’explosion.
Utiliser seulement des bouteilles de gaz protecteur, régulateurs,
tuyaux et raccords convenables pour cette application spécifique;
les maintenir ainsi que les éléments associés en bon état.
Ne pas tenir la tête en face de la sortie en ouvrant la soupape de la
bouteille.
Maintenir le chapeau de protection sur la soupape, sauf en cas
d’utilisation ou de branchement de la bouteille.
Utiliser les équipements corrects, les bonnes procédures et suffisamment de personnes pour soulever et déplacer les bouteilles.
Lire et suivre les instructions sur les bouteilles de gaz comprimé,
l’équipement connexe et le dépliant P-1 de la CGA (Compressed
Gas Association) mentionné dans les principales normes de sécurité.
2-3. Dangers existant en relation avec le moteur
L’EXPLOSION DE LA BATTERIE
peut RENDRE AVEUGLE.
Toujours porter une protection faciale, des gants
en caoutchouc et vêtements de protection lors
d’une intervention sur la batterie.
Arrêter le moteur avant de débrancher ou de brancher les câbles
de batterie.
Eviter de provoquer des étincelles avec les outils en travaillant sur
la batterie.
Ne pas utiliser le poste de soudage pour charger les batteries ou
des véhicules de démarrage rapide.
Observer la polarité correcte (+ et −) sur les batteries.
Débrancher le câble négatif (–) en premier lieu. Le rebrancher en
dernier lieu.
LE CARBURANT MOTEUR peut provoquer un incendie ou une explosion.
Arrêter le moteur avant de vérifier le niveau de
carburant ou de faire le plein.
Ne pas faire le plein en fumant ou proche d’une source d’étincelles ou d’une flamme nue.
Ne pas faire le plein de carburant à ras bord; prévoir de l’espace
pour son expansion.
Faire attention de ne pas renverser de carburant. Nettoyer tout
carburant renversé avant de faire démarrer le moteur.
Jeter les chiffons dans un récipient ignifuge.
Toujours garder le pistolet en contact avec le réservoir lors du
remplissage.
Les PIÈCES MOBILES peuvent causer
des blessures.
Ne pas approcher les mains des ventilateurs,
courroies et autres pièces en mouvement.
Ne pas approcher les mains, cheveux, vêtements lâches et outils
des organes mobiles.
Remettre en place les portes, panneaux, recouvrements ou
dispositifs de protection à la fin des travaux d’entretien et avant de
mettre le moteur en marche.
Avant d’intervenir, déposer les bougies ou injecteurs pour éviter la
mise en route accidentelle du moteur.
Bloquer le volant moteur pour éviter sa rotation lors d’une
intervention sur le générateur.
LES ÉTINCELLES À L’ÉCHAPPEMENT
peuvent provoquer un incendie.
Empêcher les étincelles d’échappement du
moteur de provoquer un incendie.
Utiliser uniquement un pare-étincelles
approuvé − voir codes en vigueur.
DES PIÈCES CHAUDES peuvent
provoquer des brûlures graves.
Ne pas toucher à mains nues les parties chaudes.
Prévoir une période de refroidissement avant de
travailler à l’équipement.
Ne pas toucher aux pièces chaudes, utiliser les outils recommandés et porter des gants de soudage et des vêtements épais pour
éviter les brûlures.
LA VAPEUR ET LE LIQUIDE DE
REFROIDISSEMENT CHAUD peuvent
provoquer des brûlures.
Il est préférable de vérifier le liquide de refroidissement une fois le moteur refroidi pour éviter
de se brûler.
Lorsque cela est nécessaire pour des travaux d’entretien et
de dépannage, faire retirer les portes, panneaux, recouvrements
ou dispositifs de protection uniquement par du personnel qualifié.
Toujours vérifier le niveau de liquide de refroidissement dans le
vase d’expansion (si présent), et non dans le radiateur (sauf si précisé autrement dans la section maintenance du manuel du
moteur).
Si le moteur est chaud et que le liquide doit être vérifié, opérer comme suivant.
Mettre des lunettes de sécurité et des gants, placer un torchon sur
le bouchon du radiateur.
Pour empêcher tout démarrage accidentel pendant les travaux
d’entretien, débrancher le câble négatif (−) de batterie de la borne.
Dévisser le bouchon légèrement et laisser la vapeur s’échapper
avant d’enlever le bouchon.
Maintenir fermés et verrouillés les portes,
recouvrements et dispositifs de protection.
panneaux,
Arrêter le moteur avant d’installer ou brancher l’appareil.
OM-4413 Page 9
L’utilisation d’un groupe autonome
à l’intérieur PEUT VOUS TUER EN
QUELQUES MINUTES.
Les fumées d’un groupe autonome contient du
monoxyde de carbone. C’est un poison invisible et inodore.
JAMAIS utiliser dans une maison ou garage,
même avec les portes et fenêtres ouvertes.
Uniquement utiliser à l’EXTERIEUR, loin des portes, fenêtres et
bouches aération.
L’ACIDE DE LA BATTERIE peut provoquer des brûlures dans les YEUX et
sur la PEAU.
Ne pas renverser la batterie.
Remplacer une batterie endommagée.
Rincer immédiatement les yeux et la peau à l’eau.
LA CHALEUR DU MOTEUR peut provoquer un incendie.
Ne pas placer l’appareil sur, au-dessus ou à
proximité de surfaces inflammables.
Tenir à distance les produits inflammables de l’échappement.
2-4. Dangers liés à l’hydraulique
Les ÉQUIPEMENTS HYDRAULIQUES
peuvent provoquer des blessures ou
même la mort.
Pour intervenir sur un circuit hydraulique, porter un équipement
de protection tel que des lunettes de sécurité, des gants de cuir,
une chemise et un pantalon en tissu résistant, des chaussures
montantes et une coiffe.
Une installation ou une utilisation incorrecte
de cet appareil pourrait conduire à des dégâts
matériels ou corporels. Seul un personnel qualifié
est autorisé à installer, faire fonctionner et réparer
cet appareil conformément à son manuel
d’utilisation, aux normes industrielles et aux
codes nationaux, d’état ou locaux.
Pour rechercher des fuites, utiliser un morceau de papier ou
de carton, jamais les mains nues. En cas de détection de fuite,
ne pas utiliser l’équipement.
Ne pas dépasser le débit nominal ou la capacité de la pompe
hydraulique ou de tout équipement du circuit hydraulique.
Concevoir le circuit hydraulique de telle sorte que la défaillance
d’un composant hydraulique ne risque pas de provoquer
un accident matériel ou corporel.
Avant d’intervenir sur le circuit hydraulique, couper l’alimentation
électrique, verrouiller et étiqueter l’appareil, détendre la pression
et s’assurer que le circuit hydraulique ne peut être remis sous
pression par inadvertance.
Ne pas intervenir sur le circuit hydraulique lorsque l’appareil
fonctionne. Seul un personnel qualifié et appliquant les consignes
du fabricant est autorisé le faire.
Ne pas modifier ou altérer la pompe hydraulique ou
les équipements fournis par le fabricant. Ne pas débrancher,
désactiver ou neutraliser les équipements de sécurité du circuit
hydraulique.
Le LIQUIDE HYDRAULIQUE est INFLAMMABLE. Ne pas
intervenir sur des composants hydrauliques à proximité
d’étincelles ou de flammes; ne pas fumer à proximité de liquide
hydraulique.
Remettre les portes, panneaux, recouvrements ou dispositifs
de protection quand l’entretien est terminé et avant de mettre
en marche l’appareil.
En cas de pénétration d’un QUELCONQUE liquide dans la peau,
celui−ci doit être retiré chirurgicalement sous quelques heures par
un médecin familiarisé avec ce type de blessure, faute de quoi
la gangrène pourrait apparaître.
Les PIÈCES MOBILES peuvent causer
des blessures.
Rester à l’écart des ventilateurs, courroies
et rotors.
Maintenir fermés et verrouillés les portes,
panneaux, recouvrements et dispositifs
de protection.
Utiliser uniquement des composants et accessoires homologués
par le fabricant.
Ne pas approcher les mains, cheveux, vêtements lâches et outils
des organes mobiles.
Se tenir à l’écart de tout point présentant un danger de pincement
ou d’écrasement créé par l’équipement raccordé au circuit
hydraulique.
Avant d’intervenir sur le circuit hydraulique, couper l’alimentation
électrique, verrouiller et étiqueter l’appareil, détendre la pression
et s’assurer que le circuit hydraulique ne peut être remis sous
pression par inadvertance.
Ne pas intervenir sous ou autour d’un équipement qui n’est
soutenu que par la pression hydraulique. Soutenir l’équipement
de façon appropriée par un moyen mécanique.
Le LIQUIDE HYDRAULIQUE risque de
provoquer des blessures ou même la mort.
Avant d’intervenir sur le circuit hydraulique,
couper l’alimentation électrique, verrouiller
et étiqueter l’appareil, détendre la pression
et s’assurer que le circuit hydraulique ne peut
être remis sous pression par inadvertance.
Détendre la pression avant de débrancher ou
de brancher des canalisations hydrauliques.
Avant
d’utiliser
l’appareil,
contrôler
les composants du circuit hydraulique,
les branchements et les flexibles en recherchant
tout signe de détérioration, de fuite et d’usure.
OM-4413 Page 10
Demander seulement à un personnel qualifié d’enlever
les dispositifs de sécurité ou les recouvrements pour effectuer,
s’il y a lieu, des travaux d’entretien et de dépannage.
Remettre en place les portes, panneaux, recouvrements ou
dispositifs de protection à la fin des travaux d’entretien et avant
de mettre le moteur en marche.
Les PIÈCES ET LIQUIDES CHAUDS peuvent
provoquer des brûlures graves.
Ne pas toucher les pièces chaudes à main nue
ni laisser des liquides chauds entrer en contact
avec la peau.
Prévoir une période de refroidissement avant d’intervenir
sur l’équipement.
Ne pas toucher aux pièces chaudes, utiliser les outils
recommandés et porter des gants de soudage et des vêtements
épais pour éviter les brûlures.
LIRE LES INSTRUCTIONS.
Lire le manuel d’utilisation avant d’installer,
d’utiliser ou d’intervenir sur l’appareil.
N’utiliser que les pièces de rechange
recommandées par le constructeur.
Effectuer l’entretien en respectant les manuels d’utilisation,
les normes industrielles et les codes nationaux, d’état et locaux.
2-5. Dangers liés à l’air comprimé
Un ÉQUIPEMENT PNEUMATIQUE risque
de provoquer des blessures ou même
la mort.
Pour rechercher des fuites, utiliser de l’eau savonneuse ou
un détecteur à ultrasons, jamais les mains nues. En cas
de détection de fuite, ne pas utiliser l’équipement.
Une installation ou une utilisation incorrecte de
cet appareil pourrait conduire à des dégâts
matériels ou corporels. Seul un personnel
qualifié est autorisé à installer, utiliser et
entretenir cet appareil conformément à son
manuel d’utilisation, aux normes industrielles et
aux codes nationaux, d’état ou locaux.
En cas d’injection d’air dans la peau ou le corps, demander
immédiatement une assistance médicale.
Ne pas dépasser le débit nominal ou la capacité du compresseur
ou de tout équipement du circuit d’air comprimé. Concevoir
le circuit d’air comprimé de telle sorte que la défaillance
d’un composant ne risque pas de provoquer un accident
matériel ou corporel.
Avant d’intervenir sur le circuit d’air comprimé, couper
l’alimentation électrique, verrouiller et étiqueter l’appareil,
détendre la pression et s’assurer que le circuit d’air ne peut être
mis sous pression par inadvertance.
Ne pas intervenir sur le circuit d’air comprimé lorsque l’appareil
fonctionne. Seul un personnel qualifié est autorisé, et appliquant
les consignes du fabricant.
Ne pas modifier ou altérer le compresseur ou les équipements
fournis par le fabricant. Ne pas débrancher, désactiver ou
neutraliser les équipements de sécurité du circuit d’air
comprimé.
Utiliser uniquement des composants et accessoires
homologués par le fabricant.
Se tenir à l’écart de tout point présentant un danger de pincement
ou d’écrasement créé par l’équipement raccordé au circuit d’air
comprimé.
Ne pas intervenir sous ou autour d’un équipement qui n’est
soutenu que par la pression pneumatique. Soutenir l’équipement
de façon appropriée par un moyen mécanique.
Remettre les portes, panneaux, recouvrements ou dispositifs
de protection quand l’entretien est terminé et avant de mettre
en marche l’appareil.
L’INHALATION D’AIR COMPRIMÉ risque
de provoquer des blessures ou même
la mort.
Ne pas inhaler d’air comprimé.
Utiliser l’air comprimé uniquement pour
découper ou gouger ainsi que pour l’outillage
pneumatique.
Les PIÈCES MOBILES peuvent causer
des blessures.
Rester à l’écart des ventilateurs, courroies
et rotors.
Maintenir fermés et verrouillés les portes,
panneaux, recouvrements et dispositifs
de protection.
Ne pas approcher les mains, cheveux, vêtements lâches et outils
des organes mobiles.
Avant d’intervenir sur le circuit d’air comprimé, couper
l’alimentation électrique, verrouiller et étiqueter l’appareil,
détendre la pression et s’assurer que le circuit d’air ne peut être
mis sous pression par inadvertance.
Demander seulement à un personnel qualifié d’enlever
les dispositifs de sécurité ou les recouvrements pour effectuer,
s’il y a lieu, des travaux d’entretien et de dépannage.
Remettre en place les portes, panneaux, recouvrements ou
dispositifs de protection à la fin des travaux d’entretien et avant
de mettre le moteur en marche.
L’AIR COMPRIMÉ risque de provoquer
des blessures ou même la mort.
Avant d’intervenir sur le circuit d’air comprimé,
couper l’alimentation électrique, verrouiller
et étiqueter l’appareil, détendre la pression
et s’assurer que le circuit d’air ne peut être mis
sous pression par inadvertance.
Détendre la pression avant de débrancher ou
de brancher des canalisations d’air.
Avant
d’utiliser
l’appareil,
contrôler
les composants du circuit d’air comprimé,
les branchements et les flexibles en recherchant
tout signe de détérioration, de fuite et d’usure.
Ne pas diriger un jet d’air vers soi−même ou vers autrui.
Pour intervenir sur un circuit d’air comprimé, porter un équipement
de protection tel que des lunettes de sécurité, des gants de cuir,
une chemise et un pantalon en tissu résistant, des chaussures
montantes et une coiffe.
Une PRESSION D’AIR RÉSIDUELLE
ET DES FLEXIBLES QUI FOUETTENT
risquent de provoquer des blessures.
Détendre la pression pneumatique des outils et
circuits avant d’entretenir, ajouter ou changer
des accessoires et avant d’ouvrir le bouchon
de vidange ou de remplissage d’huile
du compresseur.
DES PIÈCES CHAUDES peuvent
provoquer des brûlures graves.
Ne pas toucher de pièces chaudes
du compresseur ou du circuit d’air.
Laisser refroidir le circuit avant de toucher
ou entretenir des pièces.
Ne pas toucher aux pièces chaudes, utiliser les outils
recommandés et porter des gants de soudage et
des vêtements épais pour éviter les brûlures.
OM-4413 Page 11
Le MÉTAL CHAUD provenant du
découpage ou du gougeage à l’arc risque
de provoquer un incendie ou une explosion.
Ne pas découper ou gouger à proximité
de produits inflammables.
Attention aux risques d’incendie: tenir un extincteur à proximité.
LIRE LES INSTRUCTIONS.
Lire le manuel d’utilisation avant d’installer,
d’utiliser ou d’intervenir sur l’appareil.
N’utiliser que les pièces de rechange
recommandées par le constructeur.
Effectuer l’entretien en respectant les manuels d’utilisation,
les normes industrielles et les codes nationaux, d’état et locaux.
2-6. Dangers supplémentaires en relation avec l’installation, le fonctionnement et la maintenance
Risque D’INCENDIE OU D’EXPLOSION.
Ne pas placer l’appareil sur, au-dessus ou
à proximité de surfaces inflammables.
Ne pas installer l’appareil à proximité de produits inflammables.
Ne pas surcharger l’installation électrique − s’assurer que l’alimentation est correctement dimensionnée et protégée avant de
mettre l’appareil en service.
LA CHUTE DE L’APPAREIL peut blesser.
Utiliser l’anneau de levage pour lever l’appareil
et les accessoires correctement installées
seuls, PAS les bouteilles de gaz. Ne pas dépasser le poids nominal maximal de l’œilleton
(voir les spécifications).
Ne lever et ne soutenir l’appareil qu’avec de l’équipement approprié et en suivant les procédures adéquates.
En utilisant des fourches de levage pour déplacer l’unité, s’assurer que les fourches sont suffisamment longues pour dépasser
du côté opposé de l’appareil.
LE SURCHAUFFEMENT peut endommager le moteur électrique.
Arrêter ou déconnecter l’équipement avant de
démarrer ou d’arrêter le moteur.
Ne pas laisser tourner le moteur trop lentement sous risque d’endommager le moteur électrique à cause d’une tension et d’une fréquence trop faibles.
Ne pas brancher de moteur de 50 ou de 60 Hz à la prise de 100 Hz,
s’il y a lieu.
LES ÉTINCELLES VOLANTES risquent de provoquer des blessures.
Porter un écran facial pour protéger le visage et
les yeux.
Affûter l’électrode au tungstène uniquement à
la meuleuse dotée de protecteurs. Cette manœuvre est à exécuter dans un endroit sûr lorsque l’on porte l’équipement homologué de protection du visage, des mains et du corps.
Les étincelles risquent de causer un incendie − éloigner toute
substance inflammable.
DES ORGANES MOBILES peuvent
provoquer des blessures.
Ne pas s’approcher des organes mobiles.
Ne pas s’approcher des points de coincement
tels que des rouleaux de commande.
OM-4413 Page 12
LES FILS DE SOUDAGE peuvent
provoquer des blessures.
Ne pas appuyer sur la gâchette avant d’en
avoir reçu l’instruction.
Ne pas diriger le pistolet vers soi, d’autres personnes ou toute pièce mécanique en engageant le fil de soudage.
L’EMPLOI EXCESSIF peut
SURCHAUFFER L’ÉQUIPEMENT.
Laisser l’équipement refroidir ; respecter le facteur de marche nominal.
Réduire le courant ou le facteur de marche
avant de poursuivre le soudage.
Ne pas obstruer les passages d’air du poste.
LES CHARGES ÉLECTROSTATIQUES peuvent endommager les
circuits imprimés.
Établir la connexion avec la barrette de terre
avant de manipuler des cartes ou des pièces.
Utiliser des pochettes et des boîtes antistatiques pour stocker,
déplacer ou expédier des cartes de circuits imprimes.
UNE REMORQUE QUI BASCULE peut
entraîner des blessures.
Utiliser les supports de la remorque ou des
blocs pour soutenir le poids.
Installer convenablement le poste sur la remorque comme indiqué dans le manuel s’y rapportant.
LIRE LES INSTRUCTIONS.
Lisez le manuel d’instructions avant l’utilisation
ou la maintenance de l’appareil.
N’utiliser que les pièces de rechange recommandées par le constructeur.
Effectuer l’entretien en respectant les manuels d’utilisation,
les normes industrielles et les codes nationaux, d’état et locaux.
LE RAYONNEMENT HAUTE FRÉQUENCE (H.F.) risque de provoquer
des interférences.
Le rayonnement haute fréquence (H.F.) peut
provoquer des interférences avec les équipements de radio−navigation et de communication, les services de sécurité et les ordinateurs.
Demander seulement à des personnes qualifiées familiarisées
avec des équipements électroniques de faire fonctionner l’installation.
L’utilisateur est tenu de faire corriger rapidement par un électricien qualifié les interférences résultant de l’installation.
Si le FCC signale des interférences, arrêter immédiatement l’appareil.
Effectuer régulièrement le contrôle et l’entretien de l’installation.
Maintenir soigneusement fermés les portes et les panneaux des
sources de haute fréquence, maintenir les éclateurs à une distance correcte et utiliser une terre et un blindage pour réduire les
interférences éventuelles.
LE SOUDAGE À L’ARC risque de
provoquer des interférences.
L’énergie électromagnétique risque de provoquer des interférences pour l’équipement électronique sensible tel que les ordinateurs et
l’équipement commandé par ordinateur tel que
les robots.
Veiller à ce que tout l’équipement de la zone de soudage soit
compatible électromagnétiquement.
Pour réduire la possibilité d’interférence, maintenir les câbles de
soudage aussi courts que possible, les grouper, et les poser
aussi bas que possible (ex. par terre).
Veiller à souder à une distance de 100 mètres de tout équipement électronique sensible.
Veiller à ce que ce poste de soudage soit posé et mis à la terre
conformément à ce mode d’emploi.
En cas d’interférences après avoir pris les mesures précédentes, il incombe à l’utilisateur de prendre des mesures supplémentaires telles que le déplacement du poste, l’utilisation de câbles blindés, l’utilisation de filtres de ligne ou la pose de protecteurs dans la zone de travail.
2-7. Proposition californienne 65 Avertissements
Les équipements de soudage et de coupage produisent des
fumées et des gaz qui contiennent des produits chimiques
dont l’État de Californie reconnaît qu’ils provoquent des malformations congénitales et, dans certains cas, des cancers.
(Code de santé et de sécurité de Californie, chapitre 25249.5
et suivants)
Les batteries, les bornes et autres accessoires contiennent
du plomb et des composés à base de plomb, produits chimiques dont l’État de Californie reconnaît qu’ils provoquent des
cancers et des malformations congénitales ou autres
problèmes de procréation. Se laver les mains après manipulation.
Pour les moteurs à essence :
Les gaz d’échappement des moteurs contiennent des produits chimiques dont l’État de Californie reconnaît qu’ils
provoquent des cancers et des malformations congénitales
ou autres problèmes de procréation.
Pour les moteurs diesel :
Les gaz d’échappement des moteurs diesel et certains de
leurs composants sont reconnus par l’État de Californie comme provoquant des cancers et des malformations
congénitales ou autres problèmes de procréation.
2-8. Principales normes de sécurité
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
de Global Engineering Documents (téléphone : 1-877-413-5184, site
Internet : www.global.ihs.com).
Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping, American Welding Society Standard
AWS F4.1 de Global Engineering Documents (téléphone :
1-877-413-5184, site Internet : www.global.ihs.com).
National Electrical Code, NFPA Standard 70, de National Fire Protection Association, P.O. Box 9101, Quincy, MA 02269-9101 (téléphone :
617-770-3000, site Internet : www.nfpa.org).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
de Compressed Gas Association, 4221 Walney Road, 5th Floor, Chantilly, VA 20151 (téléphone : 703-788-2700, site Internet :
www.cganet.com).
Code for Safety in Welding and Cutting, CSA Standard W117.2, de
Canadian Standards Association, 5060 Mississauga, Ontario, Canada
L4W 5NS (téléphone : 800-463-6727 ou à Toronto 416-747-4044, site
Internet : www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, de American National Standards Institute,
11 West 43rd Street, New York, NY 10036-8002 (téléphone :
212-642-4900, site Internet : www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFPA Standard 51B, de National Fire Protection Association,
P.O. Box 9101, Quincy, MA 02269-9101 (téléphone : 617-770-3000,
site Internet : www.nfpa.org).
Pour les normes relatives aux circuits hydrauliques, contacter: National
Fluid Power Association, Publications Department, 3333 North Mayfair
Road, Suite 211, Milwaukee, WI 53222−3219 (tél.: (414) 778−3344,
site web: www.nfpa.com).
OSHA, Occupational Safety and Health Standards for General Industry, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, de U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(téléphone : 1-866-512-1800) (il y a 10 bureaux régionaux−−le téléphone de la région 5, Chicago, est 312-353-2220, site Internet :
www.osha.gov).
OM-4413 Page 13
2-9. Information EMF
Considérations sur le soudage et les effets de basse fréquence et des
champs magnétiques et électriques.
Le courant de soudage, pendant son passage dans les câbles de soudage, causera des champs électromagnétiques. Il y a eu et il y a encore
un certain souci à propos de tels champs. Cependant, après avoir examiné plus de 500 études qui ont été faites pendant une période de
recherche de 17 ans, un comité spécial ruban bleu du National
Research Council a conclu : « L’accumulation de preuves, suivant le
jugement du comité, n’a pas démontré que l’exposition aux champs
magnétiques et champs électriques à haute fréquence représente un
risque à la santé humaine ». Toutefois, des études sont toujours en
cours et les preuves continuent à être examinées. En attendant que les
conclusions finales de la recherche soient établies, il vous serait
souhaitable de réduire votre exposition aux champs électromagnétiques pendant le soudage ou le coupage.
Pour réduire les champs magnétiques sur le poste de travail, appliquer
les procédures suivantes :
OM-4413 Page 14
1. Garder les câbles ensemble, les torsader, les scotcher, ou les
recouvrir d’une housse.
2. Disposer les câbles d’un côté et à distance de l’opérateur.
3. Ne pas courber pas et ne pas entourer pas les câbles autour de
votre corps.
4. Garder le poste de soudage et les câbles le plus loin possible de
vous.
5. Connecter la pince sur la pièce aussi près que possible de la
soudure.
En ce qui concerne les implants médicaux :
Les porteurs d’implants doivent d’abord consulter leur médecin avant
de s’approcher des opérations de soudage à l’arc, de soudage par
points, de gougeage, du coupage plasma ou de chauffage par induction. Si le médecin approuve, il est recommandé de suivre les
procédures précédentes.
SECTION 3 − DEFINITIONS
3-1. Symbol Definitions
CC
Stop Engine
Fast
(Run, Weld/Power)
Fast/Slow
(Run/Idle)
Slow (Idle)
Start Engine
Panel/Local
Temperature
Fuel
Engine Oil
High Temperature
Check Valve
Clearance
Battery (Engine)
Engine
Glow Plug
MIG (GMAW),
Wire
Stick (SMAW)
TIG (GTAW)
Circuit Protector
Constant Voltage
Electrode
Positive
Electrode Negative
Negative
Alternating Current
(AC)
Output
Seconds
Protective Earth
(Ground)
Work Connection
Read Operator’s
Manual
CV
Constant Current
Positive
h
Time
Do not switch while
welding
A
s
Hours
14
Remote 14
Receptacle
Amperes
V
Volts
SECTION 4 − SPECIFICATIONS
4-1. Weld, Power, And Engine Specifications
Welding
Mode
Rated
Welding
Output At
Weld
Speed
Rated
Welding
Output At
Idle Speed
Maximum
Open-Circuit
Voltage
Amperage
Range In
CC Mode
CC/AC
200 A,
25 V, 60%
Duty Cycle
−−
75
35 − 250 A
CC/DC
350 A,
28 V, 60%
Duty Cycle
180 A, 28
V, 100%
Duty Cycle
80
20 − 350 A
CV/DC
300 A,
32 V, 100%
Duty Cycle
−−
50
−−
Voltage
Range In
CV Mode
Generator
Power Rating
Continuous:
Single-Phase,
12 kVA/kW
100/50 A,
120/240 V AC,
60 Hz
Fuel
Capacity
Engine
13 gal (49 L)
Tank
Kubota D1005
Water-Cooled,
Three-Cylinder,
Four-Cycle,
26 HP Diesel
Engine
10 − 34 V
OM-4413 Page 15
4-2. Dimensions, Weights, and Operating Angles
Dimensions
Height
36 in (914 mm)
(to top of exhaust)
Width
24 in (610 mm)
Depth
59-1/2 in (1511 mm)
A
B
C
A
23-5/8 in (600 mm)
B
21-1/2 in (546 mm)
C
1 in (25 mm)
D
15-5/8 in (397 mm)
E
26-3/8 in (679 mm)
F
58-3/4 in (1492 mm)
G
13/32 in (10 mm) Dia.
D
G
4 Holes
F
!
Do not exceed tilt angles or engine could
be damaged or unit could tip.
!
Do not move or operate unit where it could
tip.
E
20°
20°
20°
20°
Weight
1030 lb (467 kg); 1108 lb (502 kg) w/
fuel
Front Panel End
Lifting Eye Weight Rating:
800 426
1150 lb (522 kg)
4-3. Fuel Consumption
7.57
2.00
6.62
1.75
5.67
1.50
4.73
1.25
3.78
1.00
2.84
0.75
0.50
0.95
0.25
DC STICK
(LOW SPEED)
IDLE
0
U.S. GAL./HR.
LITERS/HR.
1.98
DC STICK/AUX POWER
HIGH SPEED
0
50 100 150 200 250 300 350 400
DC WELD AMPERES AT 100% DUTY CYCLE
0
1
2
4
6
8 10
12
POWER KVA AT 100% DUTY CYCLE
207 966
OM-4413 Page 16
4-4. Duty Cycle And Overheating
Duty Cycle is percentage of 10 minutes that unit can weld at rated load
without overheating.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
WELD AMPERES
400
350
300
250
200
150
100
0
10
20
30
40
50
60
70
80
90
100
% DUTY CYCLE
60% Duty Cycle at 350 Amperes DC
6 Minutes Welding
4 Minutes Resting
207 959
4-5. AC Generator Power Curve
The ac power curve shows the generator power in amperes available
at the 120 and 240 volt receptacles.
300
AC VOLTS
250
200
150
100
50
0
0
10
20
30
40
50
60
70
80
90
AC AMPERES
207 960
OM-4413 Page 17
4-6. CC Stick Volt-Ampere Curves
Volt-ampere curves show minimum
and maximum voltage and amperage output capabilities of unit.
Curves of other settings fall between curves shown.
A. CC/DC Stick Mode
When
welding in the Stick
mode, the arc drive circuit provides additional amperage during low voltage (short arc
length conditions) to prevent
“sticking” electrodes.
80
DC VOLTS
70
60
50
40
30
20
10
0
0
100
200
300
400
500
600
DC AMPERES
B. CC/AC Stick Mode
80
70
AC VOLTS
60
50
40
30
20
10
0
0
50
100
150
200
250
300
350
AC AMPERES
207 961 / 207 962
OM-4413 Page 18
4-7. CC TIG Volt-Ampere Curves
Volt-ampere curves show minimum
and maximum voltage and amperage output capabilities of unit.
Curves of other settings fall between curves shown.
A. CC/AC TIG Mode
60
AC VOLTS
50
40
30
20
10
0
0
50
100
150
200
250
300
350
AC AMPERES
B. CC/DC TIG Mode
50
DC VOLTS
40
30
20
10
0
0
50
100
150
200
250
300
350
400
450
DC AMPERES
207 964 / 207 965
OM-4413 Page 19
4-8. DC/CV MIG Volt-Ampere Curves
Volt-ampere curves show minimum
and maximum voltage and amperage output capabilities of unit.
Curves of other settings fall between curves shown.
45
40
DC VOLTS
35
30
25
20
15
10
5
0
0
100
200
300
400
500
600
DC AMPERES
207 963
Notes
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
OM-4413 Page 20
SECTION 5 − INSTALLATION
5-1. Installing Welding Generator
Movement
OR
!
Do not move or operate unit
where it could tip.
!
Do not lift unit from end.
!
Do not weld on base. Welding
on base can cause fuel tank fire
or explosion. Bolt unit down
using holes provided in base.
!
Always securely fasten welding generator onto transport
vehicle or trailer and comply
with all DOT and other applicable codes.
Location / Airflow Clearance
NOTICE − Do not install unit where air
flow is restricted or engine may overheat.
OR
OR
See Section 4-2 for lifting eye rating.
Mounting:
18 in
(460 mm)
18 in
(460 mm)
18 in
(460 mm)
!
Do not mount unit by supporting the base only at the four
mounting holes. Do not use
flexible mounts. Use crosssupports to adequately support unit and prevent damage
to base.
6
Cross-Supports
18 in
(460 mm)
Mount unit on flat surface or use
cross-supports to support base.
18 in
(460 mm)
Mounting
1
install2 2008-01 − Ref. 800 652 / Ref. 800 477-A / 803 274-A / 804 712
OM-4413 Page 21
5-2. Grounding Generator To Truck Or Trailer Frame
1
!
Always ground generator
frame to vehicle frame to prevent electric shock and static
electricity hazards.
!
Also see AWS Safety &
Health Fact Sheet No. 29,
Grounding of Portable And
Vehicle Mounted Welding
Generators.
!
Bed liners, shipping skids,
and some running gear insulate the welding generator
from the vehicle frame. Always connect a ground wire
from the generator equipment grounding terminal to
bare metal on the vehicle
frame as shown.
!
If unit does not have GFCI receptacles, use GFCI-protected extension cord.
1
Equipment Grounding
Terminal (On Front Panel)
Grounding Cable (Not
Supplied)
Metal Vehicle Frame
2
GND/PE
2
3
3
Connect cable from equipment
ground terminal to metal vehicle
frame. Use #10 AWG or larger
insulated copper wire.
Electrically
bond generator
frame to vehicle frame by metal-to-metal contact.
rot_grnd 2008-01 − 800 652-D
5-3. Rating Label Location
1
1
Rating Label − Typical
Locate rating label on unit. Label provides information such as weld output
ratings, generator ratings, and engine
information.
Evidence of label tampering voids
warranty.
rot_label 2008-01 − 804 712
OM-4413 Page 22
5-4. Engine Prestart Checks
Remove air bleed screw
when filling radiator. See
Section 5-5.
Full
Check radiator coolant
level when fluid is low in
recovery tank.
Full
Capacity
w/Overflow Tank
6.4 qt (6 L)
Full
1/2 in
(13 mm)
Full
Gauge On
Front Panel
Diesel
803 178
Check all fluids daily. Engine must be cold
and on a level surface. Unit is shipped with
10W30 engine oil.
Engine stops if oil pressure is too low or engine temperature is too high.
This unit has a low oil pressure shut-
down switch. However, some conditions may cause engine damage before
the engine shuts down. Check oil level
often and do not use the oil pressure
shutdown system to monitor oil level.
Follow run-in procedure in engine manual. If
unburned fuel and oil collect in exhaust pipe
during run-in, see Section 10.
Fuel
NOTICE − Do not use gasoline. Gasoline
will damage engine.
Add fresh diesel fuel before starting engine
the first time (see maintenance label for
specifications). Always leave filler neck
empty to allow room for expansion.
Do not run out of fuel or air enters fuel system and causes starting problems. See engine manual to bleed air from fuel system.
Oil
After fueling, check oil with unit on level surface. If oil is not up to full mark on dipstick,
add oil (see maintenance label).
NOTICE − Engine may use oil and wetstacking may occur during run-in period.
Check oil several times daily during run-in.
Coolant
Check coolant level in recovery tank before
starting unit the first time. Add coolant if
coolant is below bottom of radiator filler neck
(see Section 5-5 for radiator filling instructions.
Check coolant in recovery tank daily. If coolant is below Full level, add coolant until coolant level in tank is between Full and Low levels. If recovery tank coolant level was low,
also check coolant level in radiator (see
Section 5-5).
Engine coolant is a mixture of water and
ethylene glycol base antifreeze. A solution
of 50% antifreeze and 50% water must be
used in this engine. Do not use 100% antifreeze or severe damage will occur.
Keep radiator and air intake clean and free
of dirt.
NOTICE − Incorrect engine temperature
can damage engine. Do not run engine without a properly working thermostat and radiator cap.
To improve cold weather starting:
Use engine block heater (see Section
5-8).
Keep battery in good condition. Store
battery in warm area.
Use fuel formulated for cold weather
(diesel fuel can gel in cold weather).
Contact local fuel supplier for fuel
information.
Use correct grade oil for cold weather.
See Section 6-5 for additional information
on cold weather operation.
OM-4413 Page 23
5-5. Adding Coolant To Radiator
!
Stop engine and let cool.
Check coolant level according
to Section 5-4 before starting
this procedure.
If coolant level is below bottom of
radiator filler neck, add coolant as
follows:
1
1 Radiator Air Bleed Screw
Remove radiator air bleed screw.
Add coolant to radiator until coolant
is at bottom of filler neck. This ensures all air is purged from the system.
Full
Reinstall screw and radiator cap.
Check coolant level in recovery
tank (see Section 5-4).
Capacity
w/Overflow Tank
6.4 qt (6 L)
Engine coolant is a mixture of water
and ethylene glycol base antifreeze. A solution of 50% antifreeze
and 50% water must be used in this
engine. Do not use 100% antifreeze
or severe damage will occur.
Tools Needed:
Ref. 803 178
5-6. Connecting The Battery
!
−
Connect negative (−)
cable last.
+
Tools Needed:
3/8, 1/2 in
Ref. 207 554-A / Ref. 803 178 / Ref. S-0756-D
OM-4413 Page 24
5-7. Installing Exhaust Pipe
Point exhaust pipe in desired
direction but always away from
front panel and direction of
travel.
Tools Needed:
1/2 in
802 173-C / Ref. 207 554-A
5-8. Operating Engine Block Heater
!
Do not touch hot engine
block. Engine block gets hot
near heater.
NOTICE − Do not run engine while
coolant heater is on.
1
2
1
Coolant Heater
2
Heater Plug
Use heater to maintain a constant
engine coolant temperature. See
table for heater specifications.
To turn on heater, connect heater
plug to a 120 volt ac grounded receptacle.
To turn off heater, disconnect plug.
Coolant Heater Specifications
Watts
Volts ±10%
Amps
400
120
3.3
Ref. 803 178 / 803 393
OM-4413 Page 25
5-9. Connecting To Weld Output Terminals
!
Do not connect to CC and CV
terminals at the same time.
1
2
Work Weld Output Terminal
CC (Stick/TIG) Weld Output
Terminal
CV (Wire) Weld Output
Terminal
Supplied Weld Output
Terminal Nut
Weld Cable Terminal
Copper Bar
3
4
5
6
Remove supplied nut from weld output terminal. Slide weld cable terminal onto weld output terminal and
secure with nut so that weld cable
terminal is tight against copper bar.
Do not place anything between
weld cable terminal and copper
bar. Make sure that the surfaces
of the weld cable terminal and
copper bar are clean.
For MIG welding, connect work
cable to Work terminal and wire
feeder cable to CV (Wire) terminal.
For Stick/TIG welding, connect
work cable to Work terminal and
electrode holder cable to CC (Stick/
TIG) terminal.
2
3
3
1
6
Do not place
anything between
weld cable terminal
and copper bar.
4
5
Correct Installation
Incorrect Installation
803 179 / 207 554-A / 803 778-A
OM-4413 Page 26
5-10. Selecting Weld Cable Sizes*
Weld Cable Size** and Total Cable (Copper) Length in Weld Circuit
Not Exceeding***
Weld Output
Terminals
!
Stop engine before
connecting to weld
output terminals.
!
Do not use worn,
damaged,
undersized,
or
poorly
spliced cables.
* This
100 ft (30 m) or Less
150 ft
(45 m)
200 ft
(60 m)
250 ft
(70 m)
300 ft
(90 m)
350 ft
400 ft
(105 m) (120 m)
Welding
Amperes
10 − 60%
Duty
Cycle
60 − 100%
Duty
Cycle
100
4 (20)
4 (20)
4 (20)
3 (30)
2 (35)
1 (50)
1/0 (60)
1/0 (60)
150
3 (30)
3 (30)
2 (35)
1 (50)
1/0 (60)
2/0 (70)
3/0 (95)
3/0 (95)
200
3 (30)
2 (35)
1 (50)
1/0 (60)
2/0 (70)
3/0 (95)
4/0 (120)
4/0 (120)
250
2 (35)
1 (50)
1/0 (60)
2/0 (70)
3/0 (95)
4/0 (120)
2 ea. 2/0
(2x70)
2 ea. 2/0
(2x70)
300
1 (50)
1/0 (60)
2/0 (70)
3/0 (95)
4/0 (120)
2 ea. 2/0
(2x70)
2 ea. 3/0
(2x95)
2 ea. 3/0
(2x95)
350
1/0 (60)
2/0 (70)
3/0 (95)
4/0 (120)
2 ea. 2/0
(2x70)
2 ea. 3/0
(2x95)
2 ea. 3/0
(2x95)
2 ea. 4/0
(2x120)
400
1/0 (60)
2/0 (70)
3/0 (95)
4/0 (120)
2 ea. 2/0
(2x70)
2 ea. 3/0
(2x95)
2 ea. 4/0
(2x120)
2 ea. 4/0
(2x120)
10 − 100% Duty Cycle
chart is a guideline and may not suit all applications. If cables overheat, use next size larger cable.
**Weld cable size (AWG) is based on either a 4 volts or less drop or a current density of at least 300 circular mils per ampere.
( ) = mm2 for metric use
S-0007-F
***For distances longer than those shown in this guide, call a factory applications representative at 920-735-4505.
5-11. Remote 14 Receptacle RC4 Information
Engine runs at weld/power speed whenever a device connected to the remote 14 receptacle is running.
Socket*
Socket Information
A
24 volts ac. Protected by supplementary protector
CB5.
B
Contact closure to A completes 24 volts ac
contactor control circuit.
I
115 volts ac. Protected by supplementary protector CB6.
J
Contact closure to I completes 115 volts ac
contactor control circuit.
C
Output to remote control; 0 to +10 volts dc.
D
Remote control circuit common.
E
0 to +10 volts dc input command signal from
remote control. Voltage is dependent on front panel Voltage/Amperage control setting.
G
Circuit common for 24 and 115 volts ac circuits.
K
Chassis common.
24 VOLTS AC
A
B
K
C L N
D M
E
J
I
H
F
115 VOLTS AC
G
REMOTE
OUTPUT
CONTROL
GND
*The remaining sockets are not used.
OM-4413 Page 27
5-12. Guidelines For Installing Customer-Supplied Emergency Air Shutdown Valve
A customer-supplied emergency air shutdown
valve can be installed to stop the engine immediately in emergency situations.
These guidelines show the typical installation of
a Gator ESD 175-275-L3 air shutdown valve.
Installation of other air shutdown valves may
differ from that shown. Contact the air shutdown valve manufacturer or a Factory Authorized Service Agent for additional installation
and operation information.
!
Stop engine, and let cool.
!
Disconnect battery negative (−) cable.
Open doors and remove side panels.
1 Air Cleaner
2 2 in (51 mm) Hose Clamp
3 1-3/4 x 2 in (44 x 51 mm) Rubber Hose
4 Air Shutdown Valve
(Gator ESD 175-275-L3)
5 1-3/4 x 16-1/2 in (44 x 419 mm) Flexible
Radiator Hose (NAPA Part No. FM68)
Use thick-walled rubber hose. Do not use
7
heater hose. (Heater hose could let dirt into
engine.)
6 Engine Air Inlet
7 Shutdown Control
8 42 in (1067 mm) Shutdown Control Cable
(Supplied By Gator)
9 Shutdown Valve Reset Lever
Install components as shown.
Be sure air shutdown valve is installed with air
flow arrow pointing toward air inlet. Use cable
ties to keep air shutdown system components
away from hot or moving parts.
Verify the emergency air shutdown system operates correctly. After testing, use reset lever to
reset air shutdown valve.
Reinstall side panels and close doors.
Reconnect battery negative (−) cable.
1
2
8
3
Mount on lower
front panel
9
4
5
7
6
803 178 / Ref. 803 390
OM-4413 Page 28
SECTION 6 − OPERATING WELDING GENERATOR
6-1. Controls (See Section 6-2)
12
13
14
15
1
2
3
4
5
7
8
6
11
10
9
207 554-A / Ref. 803 178
OM-4413 Page 29
6-2. Description Of Controls (See Section 6-1)
Engine Lights
7
1
Use switch to lock engine in idle or weld/power
speed when Engine Control switch is in the
Speed Lock position. The idle lock switch is
not needed at start-up. The engine always
starts at idle speed.
Engine Temperature Light
Light goes on and engine stops if engine temperature is too high.
NOTICE − Stop engine and fix trouble if Engine Temperature light goes on.
2
Engine Oil Pressure Light
Light goes on and engine stops if oil pressure
is too low. Light goes on momentarily during
start-up but goes out when engine reaches
normal oil pressure.
NOTICE − Stop engine and fix trouble if Engine Oil Pressure light stays on after start-up.
3
Battery Charging Light
Light goes on if engine alternator is not charging battery. Engine continues to run.
NOTICE − Stop engine and fix trouble if Battery Charging light goes on.
Engine Gauges
4
Fuel Gauge
Use gauge to check fuel level.
5
Speed Lock Switch
With switch in the Idle position and Engine
Control switch in Speed Lock, the engine runs
at idle speed. With switch in Run position and
Engine Control switch in Speed Lock, engine
runs at weld/power speed.
Speed Lock switch does not affect engine
speed when Engine Control switch is in Run/
Idle position. (Engine speed changes with
load.)
8
Glow Plug Switch
If necessary, push switch down before startup to activate glow plug. See glow plug table
following for operating information.
NOTICE − Do not use glow plugs longer than
20 seconds.
Glow Plug Time
Engine Hour Meter
Use meter to schedule maintenance.
Engine Starting Controls
6
Engine Control Switch
Use switch to start engine, select speed, and
stop engine. In Run/Idle position, engine runs
at idle speed at no load, and weld/power
speed under load. In Speed Lock position, engine speed is determined by position of Speed
Lock switch (see item 7 and engine speed
table following).
Place Engine
Control switch in Speed
Lock position and Speed Lock switch in
Run position for TIG (GTAW) welding using a high frequency device.
The unit will not return to idle speed when
Process/Contactor switch is in a Wire or
TIG mode and the remote contactor is on
(closure between pins A and B on remote
receptacle).
70°F (21°C)
32°F (0°C)
−4°F (−20°C)
t
0 seconds
10 seconds
20 seconds
To start:
NOTICE − Do not use ether to start engine.
Using ether voids warranty.
Use glow plug switch if necessary (see item 8
and glow plug table). Turn engine control
switch to Start. Release engine control switch
when engine starts.
See Section 6-5 for additional information on
cold weather operation.
If the engine does not start, let the engine
come to a complete stop before attempting restart.
To Stop: turn Engine Control switch to Off
position.
Push engine stop lever to stop engine if
Engine Control switch does not work (see
item 9).
9 Engine Stop Lever
Use lever to stop engine if Engine Control
switch does not work.
Weld Controls
10 Voltage/Amperage Adjust Switch And
Remote 14 Receptacle
For front panel control, place switch in Panel
position and use the Voltage/Amperage Adjustment control.
For remote control, make connections to Remote 14 receptacle, and place switch in Remote position (see Sections 5-11 and 6-4).
The value selected on Voltage/Amperage Adjustment control is the maximum available at
the remote.
Set Voltage/Amperage Adjustment con-
trol (item13) to max for MIG welding.
11 DC Polarity/AC Selector Switch
NOTICE − Do not switch under load.
Use switch to select AC weld output or polarity
of DC weld output.
12 Process/Contactor Switch
See Section 6-3 for Process/Contactor switch
information.
13 Voltage/Amperage Adjustment Control
With Process/Contactor switch in any Stick or
TIG setting, use control to adjust amperage.
With Process/Contactor switch in any MIG
position, use control to adjust voltage.
Weld Meters
14 Ammeter
Meter displays weld amperage at the weld output terminals.
15 Voltmeter
Meter displays weld voltage at the weld terminals, but not necessarily at the welding arc
due to resistance of cables and connections.
Controlling Engine Speed
=
=
Any
position.
OM-4413 Page 30
=
2525 rpm (Idle Speed)
Continuous
3750 rpm max (Weld/Power Speed)
Continuous.
Use in welding applications where high
speed is needed for better arc starting
and in TIG applications using a high
frequency arc starter.
No Load: 2525 rpm (Idle Speed)
Load: 3750 rpm max (weld/Power
Speed)
6-3. Process/Contactor Switch
1
1
Process/Contactor Switch
!
Weld output terminals are energized when Process/Contactor
switch is in an Electrode Hot position and the engine is running.
The unit will not return to idle speed
when Process/Contactor switch is in
a Wire or TIG mode and the remote
contactor is on (closure between
pins A and B on remote receptacle).
Use switch to select weld process and
weld output on/off control (see table below and Section 6-4).
Place switch in Remote positions to turn
weld output on and off with a device connected to the remote receptacle.
Place switch in Electrode Hot positions
for weld output to be on whenever the engine is running.
Use Stick positions for air carbon arc
(CAC-A) cutting and gouging.
When switch is in a Stick position, the arc
drive circuit provides additional amperage during low voltage (short arc length
conditions) to prevent “sticking” electrodes.
The arc drive circuit is disabled when
switch is in Wire or TIG positions.
207 554-A / 803 179
Process/Contactor Switch Settings
Switch Setting
Process
Output On/Off Control
Remote − TIG
GTAW With HF Unit, Pulsing Device,
Or Remote Control
At Remote Receptacle
Remote − Stick
Stick (SMAW) With Remote On/Off
At Remote Receptacle
Remote − MIG
MIG (GMAW)
At Remote Receptacle
Electrode Hot − MIG
MIG (GMAW)
Electrode Hot
Electrode Hot − Stick
Stick (SMAW),
Air Carbon Arc (CAC-A) Cutting And Gouging
Electrode Hot
Electrode Hot − Scratch
Start TIG
Scratch Start TIG (GTAW)
Electrode Hot
OM-4413 Page 31
6-4. Remote Voltage/Amperage Control
1
Remote 14 Receptacle RC4
Connect optional remote control to
RC4 (see Section 5-11).
1
In Example:
Process = Stick (Using Remote On/Off)
Min = 40 A DC
Max = 180 A DC
Example: Combination Remote Amperage Control (Stick)
Max (180 A DC)
Min (40 A DC)
Set Remote
Process
Set Voltage/
Amperage
Adjust Switch
Set Polarity
Set
Voltage/
Amperage
Control
Adjust Optional Remote Control
0774 / Ref. 207 554-A
In Example:
Process = MIG
Min = 12 V DC
Max = About 42 V DC
Example: Remote Voltage Control (MIG) Using A Voltage-Sensing Wire Feeder
Use this position for
voltage-sensing
feeder
12 V
Set Voltage/
Amperage
Adjust Switch
OM-4413 Page 32
Set Process
Set Polarity
Voltage/Amperage
Control Not Used
42 V
Adjust Voltage On Feeder
6-5. Recommendations For Extreme Cold Weather Operation
For more information on operating in
cold
weather, contact the nearest Factory Authorized Service Agent or Kubota Service
Center.
Fuel
Use an arctic-grade diesel fuel and keep
fuel tank at least half full to prevent fuel
lines from draining back into tank.
Do not use gasoline or kerosene.
Do not use fuel additives.
Battery
Replacement Battery Rating: 12 Volt, 535
CCA (minimum) 90 RSV Group 55.
Check connections at battery, starter, and
engine block. Inspect battery cables for
abrasion and wear, and verify the battery
is secured.
Consider installing easily-accessible battery booster leads (0 or 00 AWG) to provide easy connection to a service truck’s
battery.
Oil
Use 10W30 oil when operating at ambient
temperatures above -4° F (−20° C).
Use 5W30 oil when operating at ambient
temperatures above -13° F (−25° C).
Operating at extremely low temperatures
thickens engine oil and reduces cranking
speed. Contact a Factory Authorized Service Agent or Kubota Service Center for
information on using 0W20 oil in these
conditions. Low temperature oil must be
replaced as ambient operating temperatures increase.
Be sure the cooling system is completely
filled with a 50/50 antifreeze/water mix
(open the radiator vent when filling). Do
not mix antifreeze and water solution in
the overflow tank. Use a premixed 50/50
antifreeze/water solution to “top off” overflow tank. Use caution if rerouting cooling
lines. Engine damage due to lack of
coolant or incorrect coolant mix is not
covered by the warranty.
Boost the starting capability of the battery
by using a battery heater.
Operating
To reduce crankcase condensation and
breather tube freezing problems, allow
engine to reach normal operating temperature as quickly as possible.
Crankcase breather tubes will collect
condensation and freeze if the hose is improperly routed. The breather tube should
be free of sharp bends and kinks. A
blocked breather tube will cause excessive crankcase pressure that will blow out
the safety plug, oil seals, or dipstick. Contact a Factory Authorized Service Agent
to obtain a shorter breather hose that is
less likely to kink.
Inspect the routing and condition of the
breather tube frequently. Reroute or replace the hose if necessary.
For continuous use in extreme cold, block
the cooling holes in the base to reduce air
flow through the radiator and achieve
higher engine temperature. Close off the
base inlet vents only if the engine coolant
or oil temperatures can be monitored to
ensure they remain within the specified
limits.
To obtain warmer air for combustion, turn
the air cleaner inlet away from the inlet
vents, and seal the inlet vents.
If operating in cold weather all the time,
consider replacing the existing radiator
cooling fan with a smaller fan that draws
less air through the radiator. Operation in
warmer temperatures would require an
additional “booster” electric fan to adequately cool the engine.
Starting
Do not use ether.
Use the engine block heater to maintain
engine temperature above ambient temperature.
Use the glow plugs for 20−30 seconds before starting. As a preseason check,
make sure the glow plugs are working
properly.
Coolant
A 50/50 antifreeze/water mix protects engine to -34° F (−37° C). If operating at even
lower temperatures, contact a Factory
Authorized Service Agent or Kubota Service Center for coolant information.
Disconnect all unnecessary loads from
generator ac receptacles when starting.
Notes
Start Your Professional
Welding Career Now!
400 Trade Square East, Troy, Ohio 45373
1-800-332-9448 www.welding.org
Over 80,000 trained
since 1930!
OM-4413 Page 33
6-6. Typical Stick Welding Connections And Control Settings
!
Stop engine.
This
section provides general
guidelines and may not suit all
applications.
Typical Settings For
7018 (1/8 in) Electrode
The control panel shows the typi-
cal settings for welding with a
7018 (1/8 in) electrode. Consult
the amperage selection tables
below if welding with other
electrodes.
1 Work Clamp
2 Electrode Holder
Connect Work cable to Work terminal
and Electrode holder cable to CC
(Stick/TIG) terminal on welding generator.
Be sure to use the correct size
weld cables (see Section 5-10).
Typical Settings For 7018 (1/8 in)
Electrode:
2
1
>
Set Process/Contactor switch to
Electrode Hot − Stick position.
>
Set DC Polarity/AC Selector
Switch to Electrode Positive
position.
>
Set amperage (see table
below).
6013
7014
7018
7024
Ni-Cl
308L
OM-4413 Page 34
USAGE
POSITION
AC
DC*
450
400
350
300
AMPERAGE
RANGE
250
200
150
100
50
ELECTRODE
3/32
1/8
5/32
3/16
7/32
1/4
1/16
5/64
3/32
1/8
5/32
3/16
7/32
1/4
3/32
1/8
5/32
3/16
7/32
1/4
3/32
1/8
5/32
3/16
7/32
1/4
3/32
1/8
5/32
3/16
7/32
1/4
3/32
1/8
5/32
3/16
3/32
1/8
5/32
PENETRATION
6010
&
6011
DIAMETER
ELECTRODE
Electrode Selection Tables
6010
EP
ALL
6011
EP
ALL
DEEP MIN. PREP, ROUGH
HIGH SPATTER
DEEP
6013
EP,EN
ALL
LOW
GENERAL
ALL
MED
ALL
LOW
SMOOTH, EASY,
FAST
LOW HYDROGEN,
STRONG
7014
EP,EN
7018
EP
7024
EP,EN
NI-CL
EP
FLAT
HORIZ
FILLET
ALL
308L
EP
ALL
LOW
SMOOTH, EASY,
FASTER
LOW
CAST IRON
LOW
STAINLESS
*EP = ELECTRODE POSITIVE (REVERSE POLARITY)
EN = ELECTRODE NEGATIVE (STRAIGHT POLARITY)
Tools Needed:
3/4 in
803 310 / 207 554-A / Ref. S-0653
6-7. Typical MIG Welding Connections And Settings
A. Solid Wire Applications
!
Stop engine.
This section provides general guidelines and may not suit all applications.
Control panel shows
Typical Control Settings For
.035 (ER70S-3)
Solid Wire − Short
Circuit Transfer w/Feeder
Powered By 14-Pin Receptacle
typical settings
for welding with .035 (ER70S-3) solid
wire. Use 75/25 Argon-based shielding
gas.
1 Work Clamp
2 Wire Feeder
3 MIG Gun
4 Gun Trigger Plug
5 14-Pin Plug And Cord
6 Gas Cylinder: 75/25 Argon-Based
Gas for Short Circuit Transfer
7 Gas Hose
Connect work cable to welding generator
Work terminal. Connect cable from feeder
to cable from welding generator CV (Wire)
terminal. Connect feeder 14-pin plug to Remote 14 receptacle on welding generator.
Note Process/Contactor,
Voltage/Amperage, and
DC Polarity/AC Selector
switch settings.
6
Be sure to use the correct size weld
cables (see Section 5-10).
Loosen MIG gun securing knob. Insert gun
end through opening in feeder and position
as close as possible to drive rolls without
touching. Tighten knob.
See wire feeder manual for wire threading
procedure
Insert gun trigger plug (item 4) into matching
receptacle and tighten threaded collar.
Connect gas hose from feeder to regulator
on cylinder.
7
5
Typical Control Settings For Short Circuit Transfer Using .035 (ER70S-3) Solid
Wire And 75/25 Argon-Based Gas w/
Feeder Powered By 14-Pin Receptacle:
Quick connector
2
>
Set Process/Contactor switch to Remote − Wire position.
>
Set DC Polarity/AC Selector switch to
Electrode Positive position.
>
Set Output Adjust switch to Remote
position to adjust voltage at feeder.
If feeder does not have remote voltage control, set Output Adjust switch
to Panel and adjust voltage at welding
generator.
>
Set V/A control to obtain minimum
spatter (typically 17 - 20 volts).
>
Set wire feed speed between 150-300
ipm.
3
4
4
1
Tools Needed:
3/4 in
803 268 / 207 554-A
OM-4413 Page 35
B. Self-Shielded Flux Core Wire Applications
!
Stop engine.
This
section provides general
guidelines and may not suit all
applications.
Typical Control Settings For 5/64 in. Self-Shielded Flux Core Wire w/Voltage Sensing Feeder
The control panel shows the typi-
cal settings for welding with 5/64
in. self-shielded flux core wire.
1 Work Clamp
2 Wire Feeder
3 MIG Gun
4 Gun Trigger Plug
5 Voltage Sensing Clamp
Connect work cable to welding generator Work terminal. Connect cable
from wire feeder to cable from welding generator CV (Wire) terminal.
Note Process/Contactor,
Voltage/Amperage, and
DC Polarity/AC Selector
switch settings.
Be sure to use the correct size
weld cables (see Section 5-10).
Loosen MIG gun securing knob. Insert gun end through opening in feeder and position as close as possible
to drive rolls without touching. Tighten knob.
See wire feeder manual for wire
threading procedure.
Insert gun trigger plug (item 4) into
matching receptacle and tighten
threaded collar.
Typical Control Settings Using
5/64 in. Self-Shielded Flux Core
Wire w/Voltage Sensing Feeder:
Quick connector
2
3
5
>
Set Process/Contactor switch
to Electrode Hot − Wire position.
>
Set DC Polarity/AC Selector
switch to Electrode Negative
position.
Set Output Adjust switch to
Panel and adjust voltage at
welding generator.
>
Do a test weld. To increase arc
length, increase voltage. To
shorten arc length, reduce voltage or increase wire feed
speed.
4
1
Tools Needed:
3/4 in
OM-4413 Page 36
803 268 / 207 554-A
6-8. Typical MIG Connections And Settings Using Weld Control And Spoolgun
Typical Settings For 4043 (.047)
Aluminum On 1/8 in Material:
Tools Needed:
3/4 in
Note Process/Contactor,
Voltage/Amperage, and
DC Polarity/AC Selector
switch settings.
6
5
8
3
1
7
2
Work
4
!
Stop engine.
This section provides general guide-
lines and may not suit all applications.
1
2
3
4
5
6
7
Weld Control
Spoolgun
Weld Power Cable From Spoolgun
Work Clamp
Gas Hose
Argon Cylinder
Trigger Control Cord
8
14-Pin Plug And Interconnecting
Cord
Be sure to use the correct size weld
cables (see Section 5-10).
Connect work cable to welding generator
Work terminal. Connect weld cable from
spoolgun to welding generator CV (Wire)
terminal.
Insert trigger control plug (item 7) into weld
control receptacle. Tighten threaded collar.
Insert 14-pin plug (item 8) into 14-pin receptacle on welding generator and tighten
threaded collar.
803 308 / 207 554-A
Connect gas hose from spoolgun to regulator on Argon bottle.
Typical Settings For 4043 (.047)
Aluminum On 1/8 in Material:
>
Set Process/Contactor switch to Remote − Wire position.
>
Set DC Polarity/AC Selector switch
to Electrode Positive position.
Set Output Adjust switch to Panel
and adjust voltage at welding generator (typically 21 − 28 volts).
OM-4413 Page 37
6-9. Typical DC Scratch Start TIG Connections And Settings
Typical Settings For 20
Gauge Material:
Tools Needed:
3/4 in
Note Process/Contactor,
Voltage/Amperage, and
DC Polarity/AC Selector
switch settings.
4
5
3
2
1
Work
6
7
803 309 / 207 554-A
!
Stop engine.
This section provides general guide1
2
3
4
5
6
7
lines and may not suit all applications.
TIG Torch
Gas Hose
Weld Power Cable
Argon Cylinder
14-Pin Plug And Interconnecting Cord
Remote Control (Foot Or Fingertip)
Work Clamp
OM-4413 Page 38
Be sure to use the correct size weld
cables (see Section 5-10).
Connect work cable to welding generator
Work terminal. Connect cable from TIG
torch to welding generator CC (Stick/TIG)
terminal.
Insert 14-pin plug (item 5) into 14-pin receptacle on welding generator and tighten
threaded collar.
Connect gas hose from TIG torch to regulator on Argon bottle.
Typical Settings For 20 Gauge Material:
>
Set Process/Contactor switch to Electrode Hot − Scratch Start TIG position.
>
Set DC Polarity/AC Selector switch to
Electrode Negative position.
Set Output Adjust switch to Panel and
adjust amperage at welding generator
(typically 30 − 60 Amps).
6-10. Typical AC TIG (With High Frequency Unit) Connections And Settings
Typical Settings For
3/16 in Aluminum
Tools Needed:
3/4 in
Note Process/Contactor,
Voltage/Amperage, and
DC Polarity/AC Selector
switch settings.
5
7
6
4
3
1
2
8
9
803 121 / 207 554-A
Work
11
10
!
Stop engine.
!
Turn Off HF Unit and welding power source, and disconnect input
power before making connections.
Stop engine on welding generators.
NOTICE − Not connecting work cables to
HF Unit will damage power source. Always connect work cables to Work Input/
Output terminal.
This section provides general guide-
lines and may not suit all applications.
1
2
3
4
5
6
7
8
9
10
11
TIG Torch
Weld Power Cable From TIG Torch
High Frequency (HF) Unit
Gas Hose
Argon Cylinder
Weld Power Cable From HF Unit
14-Pin Plug And Interconnecting Cord
Work Cable To HF Unit
AC Power Cord From HF Unit
Remote Foot Control
Work Clamp From HF Unit
Be sure to use the correct size weld
cables (see Section 5-10).
Connect the work cables from the welding
generator and the work clamp to the HF unit
Work Input/Output terminal. Connect weld
power cable from welding generator CC
(Stick/TIG) terminal to HF unit Electrode-In
Terminal.
Connect torch cable to HF unit ElectrodeOut Terminal.
Connect HF unit ac power cord to welding
generator 120 volt ac receptacle.
Connect remote control cord to receptacle
on HF unit and tighten threaded collar. Connect interconnecting cord to HF unit and Remote 14 receptacle on welding generator.
tighten threaded collar.
Connect gas hose from TIG torch to HF unit
gas valve outlet. Connect gas hose from
cylinder to HF unit gas valve inlet.
Typical Settings For 3/16 in Aluminum:
>
Set HF unit to Continuous HF and Remote Amperage adjustment.
>
Set Process/Contactor switch to Remote − TIG position.
>
Set DC Polarity/AC Selector switch to
AC position.
Set Output Adjust switch to Remote.
Adjust amperage at remote control.
If welding generator amperage setting
is 100 amperes, maximum output
through remote control is 100 amperes.
OM-4413 Page 39
6-11. Typical Carbon Arc Cutting (CAC-A) Connections And Settings
Typical Settings Using 1/4
in Carbon Electrode:
Tools Needed:
3/4 in
Note Process/Contactor,
Voltage/Amperage, and
DC Polarity/AC Selector
switch settings.
4
3
2
5
1
6
Work
7
!
Stop engine.
!
Breathing compressed air can cause
serious injury or death. Do not use
compressed air for breathing. Use
only for cutting, gouging, and tools.
!
Compressed air can cause injury.
Wear approved safety goggles. do
not direct air stream toward self or
others.
!
Hot metal from air cutting and gouging can cause fire or explosion. Do
not cut or gouge near flammables.
OM-4413 Page 40
803 310 / 207 554-A
This section provides general guidelines and may not suit all applications.
1
2
3
4
5
6
7
Carbon Arc Torch Assembly
Air Hose
Air Valve
Compressed Air Supply Line
(90 PSI at 20 CFM)
Weld Power Cable
Work Cable
Work Clamp
Be sure to use the correct size weld
cables (see Section 5-10).
Connect the work cable to the welding generator Work terminal.
Connect torch assembly weld power cable
to welding generator CC (Stick/TIG) terminal.
Connect torch assembly air hose to compressed air supply valve. Open valve.
>
Set Process/Contactor switch to Electrode Hot − Stick position.
>
Set DC Polarity/AC Selector switch to
Electrode Positive position.
Set Output Adjust switch to Panel
and. adjust amperage at welding generator.
SECTION 7 − OPERATING AUXILIARY EQUIPMENT
7-1. Generator Power Receptacles And Circuit Breakers
!
If unit does not have GFCI
receptacles, use GFCI-protected extension cord.
Generator power decreases as
1
2
weld current increases.
3
1
240 V 50 A AC Receptacle
RC1
RC1 supplies 60 Hz single-phase
power at weld/power speed. Maximum continuous output is 12 kVA/
kW.
2
120 V 20 A AC GFCI Duplex
Receptacle GFCI-2
3
120 V 20 A AC GFCI Duplex
Receptacle GFCI-3
GFCI-2 and GFCI-3 supply 60 Hz
single-phase power at weld/power
speed. Maximum output from
GFCI-2 or GFCI-3 is 2.4 kVA/kW.
4
4
Supplementary Protector CB1
CB1 protects RC1, GFCI-2, GFCI-3
from overload. If CB1 opens, the receptacles do not work.
5
Supplementary Protector CB3
6
Supplementary Protector CB4
CB3 protects GFCI-2 and CB4 protects GFCI-3 from overload. If a circuit breaker opens, the receptacle
does not work.
Move switch (CB1) or press but-
5
ton (CB3, CB4) to reset. If supplementary protector continues
to open, contact Factory Authorized Service Agent.
6
Simultaneous Welding And Genertor Power Output
Weld Current
Amperes
0
100
150
200
300
350
Watts
12000
11000
9500
7500
3000
1000
120 V
Receptacle
Amperes
240 V
Receptacle
Amperes
100
90
80
62
25
10
50
45
40
31
12
5
Combined output of all receptacles
limited to 12 kVA/kW rating of the
generator.
EXAMPLE: If 20 A is drawn from
each 120 V duplex receptacle, only
30 A is available at the 240 V
receptacle:
2 x (120 V x 20 A) + (240 V x 30 A) =
12 kVA/kW
Ref. ST-207 554-A
OM-4413 Page 41
7-2. Wiring Instructions For Optional 240 Volt, Single-Phase Plug (NEMA 14-50P)
The plug can be wired for a 240 V,
2-wire load or a 120/240V, 3-wire
load. See circuit diagram.
1
7
Current Available in Amperes
When wired for 120 V loads, each
duplex receptacle shares a load
with one half of 240 V receptacle.
240 V
Each 120 V Duplex
Receptacle*
Receptacle
0
5
10
15
20
25
30
35
40
Plug Wired for 120/240 V,
3-Wire Load
20
20
20
20
20
15
10
5
0
V x A = Watts
1
3
4
120V
2
Plug Wired for 240 V, 2-Wire
Load
3
Neutral (Silver) Terminal
4
Load 1 (Brass)Terminal
5
Load 2 (Brass) Terminal
6
Ground (Green) Terminal
7
Amperes Available using
120/240 V Plug
5
120V
240V
6
*One 240 V load or two 120 V loads.
Tools Needed:
2
3
4
240V
6
5
240 V AC
120 V AC
120 V AC
plug1 11/03 − 120 813-D
OM-4413 Page 42
SECTION 8 − MAINTENANCE AND TROUBLESHOOTING
8-1. Maintenance Label
OM-4413 Page 43
8-2. Routine Maintenance
!
Recycle engine
fluids.
Stop engine before maintaining.
See
Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
= Check
= Change
= Clean
= Replace
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * To be done by Factory Authorized Service Agent
Every
8
Hours
Reference
Section 5-6
Coolant Level
Fuel Level
Oil Level
Oil, Fuel Spills
Every
100
Hours
Section 8-4,
Engine
Manual
Air Cleaner Element
Air Cleaner Hoses
Weld Terminals
Battery Terminals
Every
200
Hours
Section 8-5,
8-6
Oil
Oil Filter
Radiator Hoses
Unreadable Labels
5/16 in.
(8 mm)
Spark Arrestor Screen
Belt Tension
Every
500
Hours
SLUDGE
Secondary Fuel Filter
Every
1000
Hours
Primary Fuel Filter
Thermostat
Drain Sludge
Slip Rings*
Brushes*
Valve Clearance*
Weld Cables
FUEL
Section 8-5
OR
Inside Unit
Every
2000
Hours
Section 8-6,
Engine
Manual
Coolant And Hoses
OM-4413 Page 44
Fuel Lines And Clamps
Injectors*
8-3. Servicing Optional Spark Arrestor
!
Stop engine and let cool.
1
Cleanout Plug
Remove plug and remove any dirt
covering cleanout hole.
Start engine and run several minutes to blow out cleanout hole. If
nothing blows out of hole, briefly
cover end of exhaust pipe with fireproof material.
!
Stop engine and let cool.
Reinstall cleanout plug.
1
Tools Needed:
1/4 in
802 656
OM-4413 Page 45
8-4. Servicing Air Cleaner
!
Stop engine.
NOTICE − Do not run engine without air
cleaner or with dirty element. Engine
damage caused by using a damaged element is not covered by the warranty.
The air cleaner primary element can
be cleaned but the dirt holding capacity of the filter is reduced with each
cleaning. The chance of dirt reaching
the clean side of the filter while cleaning and the possibility of filter damage
makes cleaning a risk. Consider the
risk of unwarrantable equipment
damage when determining whether
to clean or replace the primary element.
1
2
5
If you decide to clean the primary element, we strongly recommend installing an optional safety element to provide additional engine protection.
Never clean a safety element. Replace the safety element after servicing the primary element three times.
4
3
6
7
1
2
3
4
8
Intake Manifold
Service Indicator
Window
Reset Button
Service air cleaner element if red band
appears in window. A clear window
means air cleaner is okay. Press button to
reset indicator.
Clean or replace primary element if dirty
(see note above before cleaning). Replace primary element if damaged. Replace primary element yearly or after six
cleanings.
Optional
5
9
Housing
6
Safety Element (Optional)
7
Primary Element
8
Dust Cap
9
Dust Ejector
To clean air filter:
Wipe off cap and housing. Remove cap
and dump out dust. Remove element(s).
Wipe dust from inside cap and housing
with damp cloth. Reinstall safety element
(if present). Reinstall cap.
Keep nozzle
2 in (51 mm)
from element.
NOTICE − Do not clean housing with air
hose.
Clean primary element with compressed
air only.
Air pressure must not exceed 100 psi
(690 kPa). Use 1/8 in (3 mm) nozzle and
keep nozzle at least 2 in (51 mm) from
inside of element. Replace primary element if it has holes or damaged gaskets.
Blow
Inspect
Reinstall primary element and cap (dust
ejector down).
aircleaner1 5/02 − ST-153 929-B / ST-153 585 / Ref. 803 283 / Ref. S-0698-B
OM-4413 Page 46
8-5. Servicing Engine Lubrication And Fuel Systems
3
FLOW
4
3
7
5
1
6
Tools Needed:
2
9/16 in
Ref. 803 178 / Ref. 207 554-A / S-0842
!
Stop engine and let cool.
ing to instructions in engine manual.
Replace fuel lines if cracked or worn.
1
Oil Filter
Wipe up any spilled fuel.
2
Oil Drain Valve
NOTICE − Close valve and valve cap before adding oil and running engine.
3
Fuel Line
Fill crankcase with new oil to full mark on
dipstick (see Section 5-4).
4
Primary (In-Line) Fuel Filter
To drain water from fuel system:
5
Secondary (Canister) Fuel Filter
6
Petcock
Open secondary fuel filter petcock and
drain water into metal container. Close petcock when water-free fuel flows.
7
Fuel Tank Sludge Drain Valve
To change fuel filters:
To change oil and filter:
Install new primary fuel filter as shown.
Pull oil drain hose through access hole in
base. Change engine oil and filter accord-
Replace secondary fuel filter according to
engine manual.
!
After servicing, start engine and
check for fuel leaks.
Stop engine, tighten connections as
necessary, and wipe up fuel.
To drain sludge from fuel tank:
Attach hose to drain valve. Put metal container under drain. Open valve and drain
sludge by turning valve screw counterclockwise. Close valve and remove hose
when done.
OM-4413 Page 47
8-6. Servicing Engine Cooling System
!
Stop engine and let cool.
1
Radiator Draincock
2
Radiator Cap
3
Radiator Air Bleed Screw
Change coolant according to engine
manual. Add coolant according to Section 5-5).
Run engine until engine reaches normal
operating temperature. Loosen air bleed
screw to remove air from cooling system.
Tighten screw.
Check coolant level in recovery tank. Add
coolant if necessary
1
3
2
802 579-B / 803 178 / 802 581
OM-4413 Page 48
8-7. Replacing Throttle Solenoid TS1
!
Stop engine, and let cool.
!
Disconnect battery, negative
(−) cable first.
Remove right side engine panel.
1
2
3
4
5
6
7
8
Plug PLG39/Receptacle RC39
Throttle Solenoid TS1
Shoulder Bolt And Nut
Throttle Link
Throttle Solenoid Plunger Rod
Jam Nut
Throttle Arm
Throttle Arm Stop Screw
Disconnect solenoid plug PLG39
from wiring harness receptacle
RC39.
Remove shoulder bolt and nut from
throttle link.
Remove solenoid from mounting
bracket.
Note how much thread is visible on
solenoid plunger rod. Loosen jam nut
just enough so throttle link can be removed from solenoid rod.
Install throttle link on new solenoid
plunger rod. Turn link until the same
amount of thread will be visible on
plunger rod when the jam nut is tightened. (Do not tighten jam nut yet.)
Mount solenoid on bracket. Move solenoid plunger manually to align slot
in throttle link with hole in throttle arm.
Insert shoulder bolt through slot/hole
and secure with nut.
Be
1
sure solenoid plunger rod
pulls all the way in “bottoms”
when energized. If plunger rod
does not pull all the way in, readjust throttle link.
8
Throttle arm
2
7
should not contact
stop screw when solenoid is energized. If necessary, adjust
stop screw to create gap between throttle arm and stop
screw.
Tighten jam nut on solenoid plunger
rod. Verify all other hardware is tight.
Connect solenoid plug PLG39 to wiring harness receptacle RC39.
Reconnect battery, negative (−) lead
last.
Check engine speeds and adjust if
necessary according to Section 8-8.
Reinstall side panel.
5
6
4
3
Tools Needed:
7/16, 3/8, 1/2 in
10 mm
3/16 in
802 330-B
OM-4413 Page 49
8-8. Adjusting Engine Speed
After tuning engine, check engine
speeds with a tachometer (see table).
If necessary, adjust speeds as follows:
2500 rpm (41.6 Hz)
Start engine and run until warm. Turn
V/A control to max.
3750 Max (62.5 Hz)
Adjusting Idle Speed
Idle speed is factory set and normally
does not not require adjustment unless
the governor/injector pump or throttle
solenoid is replaced.
1
2
3
4
Throttle Link
Throttle Solenoid Plunger Rod
Jam Nut
Throttle Arm Stop Screw
Turn Engine Control switch to Run/Idle
position. Loosen jam nut and turn solenoid rod clockwise (into throttle link) to
decrease idle speed. Turn rod counterclockwise to increase idle speed.
Tighten nut.
Be sure solenoid plunger rod pulls
all the way in “bottoms” when energized. If plunger rod does not
pull all the way in, readjust rod and
throttle link.
Throttle arm
should not contact
stop screw when solenoid is energized. If necessary, adjust stop
screw to create gap between
throttle arm and stop screw.
Adjusting Weld/Power Speed
5
6
7
Throttle Solenoid
Weld Speed Jam Nut
Adjustment Screw
Turn Engine Control switch to Run
position. Loosen nut and turn screw
counterclockwise to increase speed.
Turn screw clockwise to decrease
speed. Tighten nut.
6
Using Engine Stop Lever
7
8
Engine Stop Lever
Use lever to stop engine if Engine Control switch does not work.
4
5
8
2
3
1
Tools Needed:
10 mm
802 330-B
OM-4413 Page 50
8-9. Overload Protection
Tools Needed:
3/8 in
!
Stop engine.
When a circuit breaker, supplementary protector, or fuse
opens, it usually indicates a
more serious problem exists.
Contact Factory Authorized
Service Agent.
1 Supplementary Protector CB5
CB5 protects the 24 volt ac output
to Remote 14 receptacle RC4. If
CB5 opens, 24 volt ac output to
RC4 stops.
2 Supplementary Protector CB6
CB6 protects the 115 volt ac output
to Remote 14 receptacle RC4. If
CB6 opens, 115 volt ac output to
RC4 stops.
Press button to reset.
3 Circuit Breaker CB7
4 Circuit Breaker CB8
5 Supplementary Protector
CB10
1
2
CB7 protects the engine glow plug
from overload. If CB7 opens, the
glow plug does not work and engine
may not start in cold weather.
Check continuity and connections
of engine glow plug.
CB8 protects the engine wiring system from overload. If CB8 opens,
the engine will not crank. Check
battery, starter, and engine control
switch.
6
5
4
3
CB10 protects the engine fuel solenoid from overload. If CB10 opens,
the engine cranks but does not
start. Check fuel solenoid FS1 for
obstructions.
6
Fuse F1 (On Power Board
PC7)
F1 protects the exciter excitation
winding from overload. If F1 opens,
generator power output stops or is
low. Weld output is still available.
Replace any open fuses. Reinstall
cover before operating unit.
803 178 / 803 180
OM-4413 Page 51
8-10. Troubleshooting
A. Welding
Trouble
Remedy
No weld output; generator power output Place Process/Contactor switch in a Electrode Hot position, or place switch in a Remote position and
okay at ac receptacles.
connect remote contactor to optional Remote 14 receptacle RC4 (see Section 5-11).
Check position of DC Polarity/AC switch.
Reset supplementary protector(s) CB5 and CB6 (see Section 8-9). Check for faulty remote device
connected to RC4.
Check and secure connections to Remote 14 receptacle RC4 (see Section C).
Have Factory Authorized Service Agent check capacitor board PC4 and connections.
Have Factory Authorized Service Agent check brushes and slip rings, field excitation circuit, circuit
boards PC1 and PC2, and the rotor.
No weld output or generator power out- Disconnect equipment from generator power receptacles during start-up.
put at ac receptacles.
Check fuse F1, and replace if open (see Section 8-9).
Have Factory Authorized Service Agent check brushes and slip rings, field excitation circuit, circuit
boards PC1 and PC7, and the rotor.
Erratic weld output.
Check control settings.
Clean and tighten connections both inside and outside unit.
Be sure connection to work piece is clean and tight.
Remove excessive coils from weld cables.
Use dry, properly stored electrodes.
Check and adjust engine speed (see Section 8-8).
Check and secure lead connections to remote A/V control.
Have Factory Authorized Service Agent check brushes, slip rings, and circuit boards PC1 and PC2.
High weld output.
Check position of Voltage/Amperage Adjust control.
Check engine speed, and adjust if necessary.
Have Factory Authorized Service Agent check circuit boards PC1 and PC2.
Low weld output.
Check engine speed, and adjust if necessary.
Have Factory Authorized Service Agent check brushes and slip rings, field excitation circuit, circuit
boards PC1 and PC2, and the rotor.
Low open-circuit voltage.
Check engine speed, and adjust if necessary.
Weld output cannot be adjusted.
Check position of Voltage/Amperage Adjust switch (see Section 6-1).
No power output at Remote 14 receptacle RC4.
Reset supplementary protector CB5 and/or CB6 (see Section 7-1).
No remote fine amperage or voltage Place Voltage/Amperage Adjust switch in Remote position.
control.
Check and secure connections to Remote 14 receptacle RC4 (see Section 5-11).
Repair or replace remote control device.
OM-4413 Page 52
Trouble
Min or max CV weld output only.
Remedy
Check position of Voltage/Amperage Adjustment control and Voltage/Amperage Adjust switch (see Section 6-1).
Repair or replace remote control device.
Have Factory Authorized Service Agent check circuit boards PC1 and PC2.
Lack of high frequency; difficulty in
establishing Gas Tungsten Arc Welding arc.
Use proper size tungsten for welding amperage.
Operate unit at weld/power speed.
Reduce leakage of high frequency from torch or work cable (check grounding, remove excessive
coils from weld cables, use shorter weld cables, etc.).
Check cables and torch for cracked or deteriorated insulation or bad connections. Repair or replace
necessary parts.
Wandering arc − poor control of arc
direction.
Reduce gas flow rate.
Select proper size tungsten. Properly prepare tungsten.
Tungsten electrode oxidizing and not
remaining bright after conclusion of
weld.
Shield weld zone from drafts.
Increase postflow time.
Check and tighten all gas fittings.
Properly prepare tungsten.
B. Generator Power
Trouble
No generator power output at ac receptacles; weld output okay.
Remedy
Reset supplementary protectors CB1, CB3 and/or CB4 (see Section 7-1).
Check fuse F1, and replace if necessary (see Section 8-9).
Have Factory Authorized Service Agent check brushes, slip rings, and circuit boards PC1 and PC7.
No generator power at ac receptacles
or weld output.
Disconnect equipment from generator power ac receptacles during start-up.
Check fuse F1, and replace if necessary (see Section 8-9).
Have Factory Authorized Service Agent check brushes and slip rings, field excitation circuit, circuit
boards PC1 and PC7, and the rotor.
Low power output at ac receptacles.
Check and clean air cleaner as necessary (see Section 8-4).
Check engine speed, and adjust if necessary (see Section 8-8).
Have Factory Authorized Service Agent check circuit boards PC1 and PC7.
See engine manual.
High power output at ac receptacles.
Check engine speed, and adjust if necessary (see Section 8-8).
Have Factory Authorized Service Agent check circuit boards PC1 and PC7.
Erratic power output at ac receptacles.
Have Factory Authorized Service Agent check brushes, slip rings, and circuit boards PC1 and PC7.
Check receptacle wiring and connections.
Check governor according to engine manual.
OM-4413 Page 53
C. Engine
Trouble
Engine will not crank.
Remedy
Reset circuit breaker CB8 (see Section 8-9).
Check battery voltage.
Check battery connections and tighten if necessary.
Have Factory Authorized Service Agent check Engine Control switch S2.
Engine cranks, but does not start.
Check fuel level (see Section 5-4).
Check oil level (see Section 5-4). Engine will not start if oil pressure is low.
Reset supplementary protector CB10 (see Section 8-9).
Check coolant level and fan belt (see Section 5-4 and engine manual). Engine will not start if coolant
temperature is high.
Use Glow Plug if unit does not start in cold weather. If unit still does not start, reset circuit breaker
CB7 (see Section 8-9).
Service primary and secondary fuel filters (see Section 8-5).
Check battery and replace if necessary.
Check engine charging system according to engine manual.
Bleed air from fuel system according to engine manual.
Have Factory Authorized Service Agent check low oil pressure switch S5, engine coolant temperature switch S4, and control relay CR1.
See engine manual.
Engine starts but stops when Engine
Control switch is released.
Check oil level (see Section 5-4). Engine will not start if oil pressure is too low.
Reset supplementary protector CB10 (see Section 8-9).
Check coolant level and fan belt (see Section 5-4 and engine manual). Engine will not start if engine
temperature is too high.
Check and refill crankcase with proper viscosity oil for operating temperature, if necessary (see engine manual).
Have Factory Authorized Service Agent check low oil pressure switch S5 and engine coolant temperature switch S4.
Engine does not stop.
Stop engine by pushing down engine stop lever (see Section 8-8). After stopping engine, adjust fuel
solenoid linkage (see engine manual).
Engine stopped during normal
operation.
Check fuel level (see Section 5-4).
Open fuel valve (see Section 5-4).
Check oil level (see Section 5-4). Engine stops if oil pressure is too low.
Check coolant level and fan belt (see Section 5-4 and engine manual). Engine stops if engine temperature is too high.
Bleed air from fuel system according to engine manual.
Have Factory Authorized Service Agent check low oil pressure switch S5 and engine coolant temperature switch S4.
Battery discharges between uses.
Clean top of battery with baking soda and water solution; rinse with clear water.
Periodically recharge battery (approximately every 3 months).
Replace battery.
Check voltage regulator according to engine manual.
OM-4413 Page 54
Trouble
Engine does not return to idle speed
when load is removed with Engine
Control switch in Run/Idle position.
Remedy
Remove all weld and generator power loads.
Place Process/Contactor switch in Electrode Hot position or turn off remote contactor. The unit will not
return to idle speed when Process/Contactor switch is in a remote position and the remote contactor
is on.
Turn off remote device connected to Remote 14 receptacle RC4 (see Section 5-11).
Check for obstructed movement of throttle solenoid linkage.
Have Factory Authorized Service Agent check control relay CR2, current transformer CT1, throttle
solenoid TS1, and circuit boards PC1 and PC2.
Engine does not remain at weld/power
speed when power or weld load is
applied with Engine Control switch in
Run/Idle position.
Check for obstructed movement of solenoid linkage (see Section 8-8).
Have Factory Authorized Service Agent check control relay CR2, current transformer CT1, throttle
solenoid TS1, and circuit boards PC1 and PC2.
Engine does not remain at idle speed
with Engine Control switch in Speed
Lock position and Speed Lock switch
in Idle position.
Check for obstructed movement of solenoid linkage (see Section 8-8).
Have Factory Authorized Service Agent check control relay CR2, Idle Lock switch S7, throttle solenoid TS1, and circuit boards PC1 and PC2
Engine does not remain at weld/power
speed with Engine Control switch in
Speed Lock position and Speed Lock
switch in Run position.
Check for obstructed movement of solenoid linkage (see Section 8-8).
Have Factory Authorized Service Agent check control relay CR2, Idle Lock switch S7, throttle solenoid TS1, and circuit boards PC1 and PC2.
Engine uses oil during run-in period;
wetstacking occurs.
Dry engine (see Section 10 and engine manual).
Coolant recovery tank continuously
overflows.
Bleed air from radiator, and replace lost coolant (see Section 5-5).
OM-4413 Page 55
SECTION 9 − ELECTRICAL DIAGRAMS
Figure 9-1. Circuit Diagram For Welding Generator
OM-4413 Page 56
222 859−A
OM-4413 Page 57
SECTION 10 − RUN-IN PROCEDURE
run_in4 2007−05
10-1. Wetstacking
2
!
Do not perform run-in
procedure at less than 20
volts weld output and do not
exceed duty cycle or equipment damage may occur.
1
Welding Generator
Run diesel engines near rated voltage and current during run-in period
to properly seat piston rings and
prevent wetstacking. See nameplate, rating label, or specifications
section in this manual to find rated
voltage and current.
Do not idle engine longer than
necessary. Piston rings seat
faster if engine runs at weld/
power rpm, and the welding
generator is kept loaded during
run-in.
2
Engine Exhaust Pipe
1
Wetstacking is unburned fuel and
oil in the exhaust pipe and occurs
during run-in if the engine is run too
long at light load or idle rpm.
If exhaust pipe is coated with a wet,
black, tar-like substance, dry the
engine using one of the following
run-in procedures.
See the engine manual for additional engine run-in information.
OM-4413 Page 58
10-2. Run-In Procedure Using Load Bank
4
2
1
!
Stop engine.
!
Do not touch hot exhaust
pipe, engine parts, or load
bank/grid.
!
Keep exhaust and pipe away
from flammables.
NOTICE − Do not perform run-in
procedure at less than 20 volts weld
output and do not exceed duty
cycle or equipment damage may
occur.
1 Load Bank
Turn all load bank switches Off. If
needed, connect load bank to 115
volts ac wall receptacle or generator auxiliary power receptacle.
2
Welding Generator
3 Weld Cables
Connect load bank to generator
weld output terminals using proper
size weld cables with correct
connectors. Observe
correct
polarity.
Start engine and run for several
minutes.
Set load bank switches and then
adjust generator V/A control so load
equals 225 amps at 30 volts.
3
Check generator and load bank
meters after first five minutes then
every fifteen minutes to be sure
generator is loaded properly.
Check oil level frequently during run-in; add oil if needed.
It is recommended to run the welding generator for two hours minimum and up to four hours under
load. Place V/A control in minimum
position, then turn off load bank to
remove load. Run engine several
minutes at no load.
!
Stop engine and let cool.
4 Engine Exhaust Pipe
Repeat procedure if wetstacking is
present.
S-0683
OM-4413 Page 59
10-3. Run-In Procedure Using Resistance Grid
6
2
!
Stop engine.
!
Do not touch hot exhaust
pipe, engine parts, or load
bank/grid.
!
Keep exhaust and pipe away
from flammables.
NOTICE − Do not perform run-in
procedure at less than 20 volts weld
output and do not exceed duty
cycle or equipment damage may
occur.
1
1 Resistance Grid
Use grid sized for generator rated
output.
Turn Off grid.
2
Welding Generator
3 Weld Cables
Connect grid to generator weld
output terminals using proper size
weld cables with correct connectors (polarity is not important).
4
Voltmeter
5 Clamp-On Ammeter
Connect voltmeter and ammeter as
shown, if not provided on generator.
Start engine and run for several
minutes.
3
5
Set grid switches and then adjust
generator V/A control so load
equals 225 amps at 30 volts.
Check generator and meters after
first five minutes then every fifteen
minutes to be sure generator is
loaded properly.
Check oil level frequently dur-
4
ing run-in; add oil if needed.
+
It is recommended to run the welding generator for two hours minimum and up to four hours under
load. Place V/A control in minimum
position, then shut down grid to
remove load. Run engine several
minutes at no load.
!
Stop engine and let cool.
6 Engine Exhaust Pipe
Repeat procedure if wetstacking is
present.
S-0684
OM-4413 Page 60
SECTION 11 − GENERATOR POWER GUIDELINES
The views in this section are intended to be representative of all engine-driven welding generators. Your unit may differ from those shown.
11-1. Selecting Equipment
1
2
3
Generator Power Receptacles
− Neutral Bonded To Frame
3-Prong Plug From Case
Grounded Equipment
2-Prong Plug From Double
Insulated Equipment
Be sure equipment has double
insulated symbol and/or wording on it.
1
!
2
Do not use 2-prong plug unless equipment is double insulated.
3
OR
gen_pwr 2008−01 − ST-800 577
11-2. Grounding Generator To Truck Or Trailer Frame
!
Always ground generator
frame to vehicle frame to prevent electric shock and static
electricity hazards.
!
Also see AWS Safety &
Health Fact Sheet No. 29,
Grounding of Portable And
Vehicle Mounted Welding
Generators.
1
Equipment Grounding
Terminal (On Front Panel)
Grounding Cable (Not
Supplied)
Metal Vehicle Frame
2
3
1
2
Connect cable from equipment
ground terminal to metal vehicle
frame. Use #10 AWG or larger
insulated copper wire.
Electrically
bond generator
frame to vehicle frame by metal-to-metal contact.
GND/PE
!
Bed liners, shipping skids,
and some running gear insulate the welding generator
from the vehicle frame. Always connect a ground wire
from the generator equipment grounding terminal to
bare metal on the vehicle
frame as shown.
!
If unit does not have GFCI receptacles, use GFCI-protected extension cord.
3
800 652-D
OM-4413 Page 61
11-3. Grounding When Supplying Building Systems
1
2
1
2
Use #10 AWG or larger insulated
copper wire.
3
GND/PE
Equipment Grounding
Terminal
Grounding Cable
Ground Device
Use ground device as stated in
electrical codes.
2
3
!
Ground generator to system
earth ground if supplying
power to a premises (home,
shop, farm) wiring system.
!
Also see AWS Safety &
Health Fact Sheet No. 29,
Grounding of Portable And
Vehicle Mounted Welding
Generators.
ST-800 576-B
11-4. How Much Power Does Equipment Require?
1
Resistive Load
A light bulb is a resistive load and
requires a constant amount of power.
2
3
2
1
Non-Resistive Load
Equipment with a motor is a non-resistive load and requires approximately six times more power while
starting the motor than when running
(see Section 11-8).
VOLTS 115
AMPS 4.5
Hz
60
3
Rating Data
Rating shows volts and amperes, or
watts required to run equipment.
Amperes x Volts = Watts
Example 1: If a drill uses 4.5 amperes at 115 volts, calculate its running power requirement in watts.
3
4.5 A x 115 V = 520 W
The load applied by the drill is 520
watts.
Example 2: If three 200 watt flood
lamps are used with the drill from Example 1, add the individual loads to
calculate total load.
(3 x 200W) + 520 W = 1120 W
The total load applied by the three
flood lamps and drill is 1120 watts.
S-0623
OM-4413 Page 62
11-5. Approximate Power Requirements For Industrial Motors
Industrial Motors
Split Phase
Capacitor Start-Induction Run
Capacitor Start-Capacitor Run
Fan Duty
Rating
Starting Watts
Running Watts
1/8 HP
1/6 HP
1/4 HP
1/3 HP
1/2 HP
1/3 HP
1/2 HP
3/4 HP
1 HP
1-1/2 HP
2 HP
3 HP
5 HP
1-1/2 HP
5 HP
7-1/2 HP
10 HP
1/8 HP
1/6 HP
1/4 HP
1/3 HP
1/2 HP
800
1225
1600
2100
3175
2020
3075
4500
6100
8200
10550
15900
23300
8100
23300
35000
46700
1000
1400
1850
2400
3500
300
500
600
700
875
720
975
1400
1600
2200
2850
3900
6800
2000
6000
8000
10700
400
550
650
800
1100
11-6. Approximate Power Requirements For Farm/Home Equipment
Farm/Home Equipment
Stock Tank De-Icer
Grain Cleaner
Portable Conveyor
Grain Elevator
Milk Cooler
Milker (Vacuum Pump)
FARM DUTY MOTORS
Std. (e.g. Conveyors,
Feed Augers, Air
Compressors)
High Torque (e.g. Barn
Cleaners, Silo Unloaders,
Silo Hoists, Bunk Feeders)
3-1/2 cu. ft. Mixer
High Pressure 1.8 Gal/Min
Washer 2 gal/min
2 gal/min
Refrigerator or Freezer
Shallow Well Pump
Sump Pump
Rating
1/4 HP
1/2 HP
3/4 HP
2 HP
1/3 HP
1/2 HP
3/4 HP
1 HP
1-1/2 HP
2 HP
3 HP
5 HP
1-1/2 HP
5 HP
7-1/2 HP
10 HP
1/2 HP
500 PSI
550 PSI
700 PSI
1/3 HP
1/2 HP
1/3 HP
1/2 HP
Starting Watts
Running Watts
1000
1650
3400
4400
2900
10500
1720
2575
4500
6100
8200
10550
15900
23300
8100
23300
35000
46700
3300
3150
4500
6100
3100
2150
3100
2100
3200
1000
650
1000
1400
1100
2800
720
975
1400
1600
2200
2850
3900
6800
2000
6000
8000
10700
1000
950
1400
1600
800
750
1000
800
1050
OM-4413 Page 63
11-7. Approximate Power Requirements For Contractor Equipment
Contractor
Hand Drill
Circular Saw
Table Saw
Band Saw
Bench Grinder
Air Compressor
Electric Chain Saw
Electric Trimmer
Electric Cultivator
Elec. Hedge Trimmer
Flood Lights
Submersible Pump
Centrifugal Pump
Floor Polisher
High Pressure Washer
55 gal Drum Mixer
Wet & Dry Vac
OM-4413 Page 64
Rating
Starting Watts
Running Watts
1/4 in
3/8 in
1/2 in
6-1/2 in
7-1/4 in
8-1/4 in
9 in
10 in
14 in
6 in
8 in
10 in
1/2 HP
1 HP
1-1/2 HP
2 HP
1-1/2 HP, 12 in
2 HP, 14 in
Standard 9 in
Heavy Duty 12 in
1/3 HP
18 in
HID
Metal Halide
Mercury
Sodium
Vapor
400 gph
900 gph
3/4 HP, 16 in
1 HP, 20 in
1/2 HP
3/4 HP
1 HP
1/4 HP
1.7 HP
2-1/2 HP
350
400
600
500
900
1400
4500
6300
2500
1720
3900
5200
3000
6000
8200
10500
1100
1100
350
500
2100
400
125
313
1000
1400
1250
600
900
4500
6100
3150
4500
6100
1900
900
1300
350
400
600
500
900
1400
1500
1800
1100
720
1400
1600
1000
1500
2200
2800
1100
1100
350
500
700
400
100
250
1000
200
500
1400
1600
950
1400
1600
700
900
1300
11-8. Power Required To Start Motor
Single-Phase Induction Motor Starting Requirements
Motor Start
Code
G
H
J
K
L
M
N
P
KVA/HP
6.3
7.1
8.0
9.0
10.0
11.2
12.5
14.0
1
2
3
4
Motor Start Code
Running Amperage
Motor HP
Motor Voltage
To find starting amperage:
4
1
3
AC MOTOR
VOLTS 230
AMPS 2.5
CODE M
Hz
60
HP
1/4
PHASE 1
2
Step 1: Find code and use table to
find kVA/HP. If code is not listed,
multiply running amperage by six to
find starting amperage.
Step 2: Find Motor HP and Volts.
Step 3: Determine starting amperage (see example).
Welding generator amperage output must be at least twice the
motor’s running amperage.
(kVA/HP x HP x 1000) / Volts =
Starting Amperage
Example: Calculate starting amperage required for a 230 V, 1/4 HP motor with a motor start code of M.
Volts = 230, HP = 1/4, kVA/HP =
11.2
(11.2 x 1/4 x 1000) / 230 = 12.2A
Starting the motor requires 12.2
amperes.
S-0624
11-9. How Much Power Can Generator Supply?
1
Limit Load To 90% Of
Generator Output
Always start non-resistive (motor)
loads in order from largest to smallest, and add resistive loads last.
2
1
2
5 Second Rule
If motor does not start within 5
seconds, turn off power to prevent
motor damage. Motor requires
more power than generator can
supply.
Ref. ST-800 396-A / S-0625
OM-4413 Page 65
11-10. Typical Connections To Supply Standby Power
1
2
Utility
Electrical
Service
4
3
Transfer Switch
Fused
Disconnect
Switch
(If Required)
Welding
Generator
Output
!
Have only qualified persons
perform these connections
according to all applicable
codes and safety practices.
!
Properly install and ground
this equipment according to
its Owner’s Manual and national, state, and local codes.
Customer-supplied equipment
is required if generator will supply standby power during
emergencies or power outages.
1 Utility Electrical Service
5
2 Transfer Switch (Double-Throw)
Essential
Loads
Switch transfers the electrical load
from electric utility service to the
generator. Transfer load back to
electric utility when service is restored.
Install correct switch (customersupplied). Switch rating must be
same as or greater than the branch
overcurrent protection.
3 Fused Disconnect Switch
Install correct switch (customersupplied) if required by electrical
code.
4 Welding Generator Output
Generator output voltage and wiring must be consistent with regular
(utility) system voltage and wiring.
Connect generator with temporary
or permanent wiring suitable for the
installation.
Turn off or unplug all equipment
connected to generator before
starting or stopping engine. When
starting or stopping, the engine has
low speed which causes low voltage and frequency.
5 Essential Loads
Generator output may not meet the
electrical requirements of the premises. If generator does not produce
enough output to meet all requirements, connect only essential
loads (pumps, freezers, heaters,
etc. − See Section 11-4).
OM-4413 Page 66
11-11. Selecting Extension Cord (Use Shortest Cord Possible)
Cord Lengths for 120 Volt Loads
If unit does not have GFCI receptacles, use GFCI-protected extension cord.
Maximum Allowable Cord Length in ft (m) for Conductor Size (AWG)*
Current
(Amperes)
Load (Watts)
5
600
7
840
10
1200
15
4
6
8
10
12
14
350 (106)
225 (68)
137 (42)
100 (30)
400 (122)
250 (76)
150 (46)
100 (30)
62 (19)
400 (122)
275 (84)
175 (53)
112 (34)
62 (19)
50 (15)
1800
300 (91)
175 (53)
112 (34)
75 (23)
37 (11)
30 (9)
20
2400
225 (68)
137 (42)
87 (26)
50 (15)
30 (9)
25
3000
175 (53)
112 (34)
62 (19)
37 (11)
30
3600
150 (46)
87 (26)
50 (15)
37 (11)
35
4200
125 (38)
75 (23)
50 (15)
40
4800
112 (34)
62 (19)
37 (11)
45
5400
100 (30)
62 (19)
50
6000
87 (26)
50 (15)
*Conductor size is based on maximum 2% voltage drop
Cord Lengths for 240 Volt Loads
If unit does not have GFCI receptacles, use GFCI-protected extension cord.
Maximum Allowable Cord Length in ft (m) for Conductor Size (AWG)*
Current
(Amperes)
Load (Watts)
5
1200
7
1680
10
2400
15
4
6
8
10
12
14
700 (213)
450 (137)
225 (84)
200 (61)
800 (244)
500 (152)
300 (91)
200 (61)
125 (38)
800 (244)
550 (168)
350 (107)
225 (69)
125 (38)
100 (31)
3600
600 (183)
350 (107)
225 (69)
150 (46)
75 (23)
60 (18)
20
4800
450 (137)
275 (84)
175 (53)
100 (31)
60 (18)
25
6000
350 (107)
225 (69)
125 (38)
75 (23)
30
7000
300 (91)
175 (53)
100 (31)
75 (23)
35
8400
250 (76)
150 (46)
100 (31)
40
9600
225 (69)
125 (38)
75 (23)
45
10,800
200 (61)
125 (38)
50
12,000
175 (53)
100 (31)
*Conductor size is based on maximum 2% voltage drop
OM-4413 Page 67
SECTION 12 − PARTS LIST
Hardware is common and
not available unless listed.
17
7
6
14
15
18
16
13
12
11
10
9
8
19
5
4
20
3
107
21
30
29
22 − Fig.12-3
31
28
32
104
33
2
34
1
105
103 Fig. 12-2
35
23
24
27
26
25
99
100
102
101
Figure 12-1. Main Assembly
OM-4413 Page 68
63
62
61
60
64
59
58
65
57
54
56
55
38
106
40
37
36 − Fig. 12-4
66
67
52
68
39
72
70
53
51
73
50
47
44
69
71
77
41
74
75
42
46
95
43
49
48
76
45
93
94
78
80
92
81
91
90
79
82
85
83
84
86
89
87
88
98
97
96
803 269
OM-4413 Page 69
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 12-1. Main Assembly
. . . 1 . . . . . . . . . . . . . . 013367
. . . 2 . . . . . . . . . . . . . +198157
. . . 2 . . . . . . . . . . . ♦+198 873
. . . 3 . . . . . . . . . . . . . . 233953
. . . 4 . . . . . . . . . . . . . +198155
. . . 4 . . . . . . . . . . . +♦198 871
. . . . . . . . . . . . . . . . . . ♦163175
. . . . . . . . . . . . . . . . . . ♦163167
. . . . . . . . . . . . . . . . . . ♦163174
. . . . . . . . . . . . . . . . . . . . 173348
. . . 5 . . . . . . . . . . . . . . 192041
. . . 6 . . . . . . . . . . . . . . 200775
. . . 7 . . . . . . . . . . . . . . 198159
. . . 8 . . . . . . . . . . . . . . 193411
. . . 9 . . . . . . . . . . . . . . 198156
. . . 9 . . . . . . . . . . . . ♦198872
. . . 10 . . . . . . . . . . . . . . 198525
. . . 11 . . . . . . . . . . . . . . 198164
. . . 11 . . . . . . . . . . . +♦198 878
. . . 12 . . . . . . . . . . . . . . 194320
. . . 13 . . . . . . . . . . . . . . 237919
. . . 14 . . . . . . . . . . . . . +198162
. . . 14 . . . . . . . . . . . . ♦198 875
. . . 15 . . . . . . . . . . . . . . 200448
. . . 16 . . . . . . . . . . . . . . 183314
. . . 17 . . . . . . . . . . . . . . 201882
. . . 18 . . . . . . . . . . . . . . 198153
. . . 19 . . . . . . . . . . . . . . 176230
. . . 20 . . . . . . . . . . . . . . 194320
. . . 21 . . . . . . . . . . . . . +198154
. . . 21 . . . . . . . . . . . . ♦198 870
. . . 22 . . . . . . . . . . Figure 12-3
. . . 23 . . . . . . . . . . . . . . 198167
. . . 24 . . . . . . . . . . . . . . 190861
. . . . . . . . . . . . . . . . . . . . 208871
. . . . . . . . . . RC5 . . . . 158466
. . . . . . . . . PLG38 . . . 192170
. . . . . . . . . . . . . . . . . . . . 192169
. . . . . . . . . PLG36 . . . 192171
. . . . . . . . . PLG37 . . . 192168
. . . . . . . . . PLG39 . . . 092670
. . . . . . . . . . . . . . . . . . . . 192167
. . . 25 . . . . CB10 . . . . 139266
. . . 26 . . . . CB8 . . . . 115427
. . . 27 . . . . CB7 . . . . 147658
. . . . . . . . . . . . . . . . . . . . 187654
. . . 28 . . . . . . . . . . . . . . 198054
. . . . . . . . . . . . . . . . . . . . 209344
. . . 29 . . . . CR3 . . . . 155309
. . . 30 . . . . . . . . . . . . . . 193414
. . . 31 . . . . . . . . . . . . . . 172296
. . . 32 . . . . . . . . . . . . . . 192239
. . . 33 . . . . . . . . . . . . . . 206795
. . . 34 . . . . . . . . . . . . . +197265
. . . 35 . . . . . . . . . . . . . . 203260
. . . 36 . . . . . . . . . . Figure 12-4
. . . 37 . . . . . S5 . . . . . 197145
. . . 38 . . . . . . . . . . . . . . 192517
OM-4413 Page 70
. . Label, Warning Moving Parts Can Cause Serious Etc . . . . . . . . . . . . . . . . 1
. . Panel, Generator Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Panel, Generator Left Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Label, Warning General Precautionary Csa . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Cover, Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Cover, Generator Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Screw, 250−20x .75 Hex Hd−pln Stainless Pln T18−8 302−305 . . . . . . . . 37
. . Washer, Lock .254idx0.489odx.062t Stainless Split.250 . . . . . . . . . . . . . . . 37
. . Washer, Flat .281idx0.625odx.050t Stainless . . . . . . . . . . . . . . . . . . . . . . . . 37
. . Extrusion, Rubber W/Adhesive .370 X .750 . . . . . . . . . . . . . . . . . . . . . . . 4.75 ft
. . Label, Use Diesel Fuel Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Edge, Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ft
. . Tray, Fuel Spill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Brace, Hood Access Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Panel, Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Panel, Access Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Hinge, Door Access 180 Deg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . Hood, Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Hood, Access Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Latch, Lever Flush Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Label, Diesel Engine Maintenance Kubota D1005 . . . . . . . . . . . . . . . . . . . 1
. . Plenum, Radiator Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Plenum, Radiator Cover Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Label, Warning Steam And Hot Coolant Can Burn . . . . . . . . . . . . . . . . . . . 1
. . Clamp, Muffler 1.625 Dia U Pld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . Pipe, Exhaust Elbow 1.654 ID Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Panel, Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Label, Hot Exhaust Parts Do Not Touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Latch, Lever Flush Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . Door, Access Removable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Door, Access Removable Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Stabilizer/Rectifier/Control box Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Support, Weld Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . Label, Warning Electric Shock And Moving Parts Etc . . . . . . . . . . . . . . . . 1
. . Harness, Wrg Engine Compartment (consisting of) . . . . . . . . . . . . . . . . . . 1
. . . . Conn, Rect Univ 084 12p/S 3row Rcpt Cable/Panel Lkg . . . . . . . . . . . . 1
. . . . Conn, Rect 250 2skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Conn, Rect 250 1skt 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Conn, Rect 250 3skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Conn, Rect 250 1pin 1row Rcpt Cable Lkg . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Conn, Rect Univ 084 3p/S 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . 1
. . . . Seal, Wire Univ 3p/S 1row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Supplementary Protector, Man Reset 1p 15a 250vac Frict . . . . . . . . . . 1
. . . . Circuit Breaker, Man Reset 1p 25a 250vac Frict . . . . . . . . . . . . . . . . . . . 1
. . . . Circuit Breaker, Man Reset 1p 30a 250vac Screw . . . . . . . . . . . . . . . . . 1
. . . . Seal, Wire Univ 12p/S 3row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Upright, Base Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Seal, Upright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Contactor, Solenoid 12vdc Continuous 400a Inrush . . . . . . . . . . . . . . . . . . 1
. . Bracket, Mtg Gas Spring Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Ball Gas Spring, Stud .39 Dia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . Spring, Pressure Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Boot, Circuit Breaker Clear Hex Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . Bracket, Mtg Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Label, Caution Do Not Use Ether . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Switch, Pressure Oil 7psi Nc Screw Term . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Gasket, Exhaust Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 12-1. Main Assembly (Continued)
. . . 39 . . . . . . . . . . . . . . 236993
. . . 40 . . . . . S4 . . . . . 205800
. . . 41 . . . . . . . . . . . . . . 192475
. . . 42 . . . . . . . . . . . . . . 118829
. . . 43 . . . . . . . . . . . . . . 194127
. . . 44 . . . . . . . . . . . . . . 145675
. . . 45 . . . . TS1 . . . . 192196
. . . 46 . . . . . . . . . . . . . . 192663
. . . 47 . . . . . . . . . . . . . . 047235
. . . 48 . . . . . . . . . . . . . . 047234
. . . 49 . . . . . . . . . . . . . . 203897
. . . 50 . . . . . . . . . . . . . . 165271
. . . 51 . . . . . . . . . . . . . +187462
. . . 52 . . . . . . . . . . . . . . 192934
. . . . . . . . . . . . . . . . . . . . 192517
. . . . . . . . GLOW PLUG . 187820
. . . . . . . . . . . . . . . . . . . . 206107
. . . . . . . . . . . . . . . . . . . *197197
. . . . . . . . . . . . . . . . . . . . 010146
. . . 53 . . . . . . . . . . . . . . 197671
. . . 54 . . . . . . . . . . . . . . 192194
. . . 55 . . . . . . . . . . . . . . 242596
. . . 56 . . . . . . . . . . . . . . 191693
. . . 57 . . . . . . . . . . . . . +202243
. . . 58 . . . . . . . . . . . . . . 191341
. . . 59 . . . . . . . . . . . . . . 198186
. . . 60 . . . . . . . . . . . . . . 197822
. . . . . . . . . . . . . . . . . . . . 187120
. . . 61 . . . . . . . . . . . . . . 194578
. . . 62 . . . . . . . . . . . . . . 198181
. . . 63 . . . . . . . . . . . . . . 191626
. . . 64 . . . . . . . . . . . . . . 192195
. . . 65 . . . . . . . . . . . . . . 182092
. . . 66 . . . . . . . . . . . . . . 201528
. . . 67 . . . . . . . . . . . . . . 198187
. . . 68 . . . . . . . . . . . . . . 198185
. . . 69 . . . . . . . . . . . . . . 191342
. . . 70 . . . . . . . . . . . . . . 202198
. . . 71 . . . . . . . . . . . . . *192744
. . . 72 . . . . . . . . . . . . . *066113
. . . 73 . . . . . . . . . . . . . *196428
. . . 74 . . . . . . . . . . . . . . 192476
. . . 75 . . . . . . . . . . . . . . 192188
. . . . . . . . . . . . . . . . . . . *187441
. . . . . . . . . . . . . . . . . . . *202102
. . . 76 . . . . . . . . . . . . . . 193026
. . . 77 . . . . . . . . . . . . . . 209329
. . . 78 . . . . . . . . . . . . . . 197256
. . . 79 . . . . . . . . . . . . . . 197227
. . . 80 . . . . . . . . . . . . . . 110465
. . . 81 . . . . . . . . . . . . . . 032453
. . . 82 . . . . . . . . . . . . . . 204875
. . . 83 . . . . BATT . . . . 146237
. . . . . . . . . . . . . . . . . . . . 108081
. . . 84 . . . . . . . . . . . . . . 114923
. . . 85 . . . . . . . . . . . . . . 182276
. . . 86 . . . . . . . . . . . . . . 494604
. . . 87 . . . . . . . . . . . . . . 097829
. . Engine, Kubota Dsl Elec D1005−e3b−mlr−1 (Consisting Of) . . . . . . . . . . . 1
. . . . Switch, Thermo Temp 230deg +/−5deg F No . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Support, Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . Screw, shld stl sch .312-18 x .500 x .375 . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Linkage, Throttle Solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Nut, .312-18 .50 hex .37h stl Pld Deformed Lkg thrd . . . . . . . . . . . . . . . . 1
. . . . Solenoid, Throttle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Bracket, Mtg Solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Washer, Seal Oil Copper .879id X 1.059od 111−8737 . . . . . . . . . . . . . . 2
. . . . Banjo Bolt, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Hose, Oil W/Fittings 22.500 Lg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Valve, Oil Drain 3/8−18 Nptf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Bottle, Overflow W/Cap & Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Bracket, Mtg Coolant Recovery Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Gasket, Exhaust Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Glow Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . Injector Assy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Belt, Fan Kubota 905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Clamp, Nyl .625 Clamp Dia X.500 Wide (For Overflow Bottle Hose) . . . 1
. . Label, Coolant Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Pipe, Exhaust Flexible Inlet W/Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Fan, Engine Cooling 330mm 6 Blade Pusher Kubota . . . . . . . . . . . . . . . . 1
. . Guard, Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Shroud, Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Hose, Radiator Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Bracket, Mtg Radiator Lh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Radiator, W/14# Cap 3 Row Core 1.125 Inlet/Outlet . . . . . . . . . . . . . . . . . 1
. . Cap, radiator pressure 14 lb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Baffle, Foam Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Radiator Arch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Bumper, Door Engine Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . Pipe, Exhaust Outlet 1.625 Od . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Label, Warning Moving Parts Can Cause Serious Etc . . . . . . . . . . . . . . . . 1
. . Muffler, Exhaust Engine Kubota Dh905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Bracket, Mtg Radiator Rh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Baffle, Lower Radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Hose, Radiator Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Base, Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Filter, Fuel Spin−on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Filter, Fuel Inline .250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Filter, Oil Kubota 905dh/1005dh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Mount, Engine Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . Air Cleaner, Intake 90deg Outlet 4.25in Dia. . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Element, Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Element, Air Cleaner Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Band, Mtg Air Cleaner Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Indicator, restriction air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Hose, Elbow Air Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Hose, Elbow Air Cleaner 1.750id . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Tubing, Corrugated Plastic Slit .500 dia x coil . . . . . . . . . . . . . . . . . . . . . . . 2.1 ft
. . Cable, Bat Neg 26.000 No.2 Awg W/Clamp & .406 Rng . . . . . . . . . . . . . . 1
. . Hold Down, Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . Battery, Stor 12v 535 Crk 90 Rsv Gp 55 Maint Free . . . . . . . . . . . . . . . . . 1
. . Terminal Protector, Battery Post Mtg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . Boot, Insulator Term Post Red 1/0 Cable .875odx1.00 . . . . . . . . . . . . . . . 2
. . Cable, Bat Pos 28.000 No 1 Awg W/Clamp & .406 Rng . . . . . . . . . . . . . . 1
. . Bolt, J Stl .250−20 X 8.000 Pld W/Nuts&washers . . . . . . . . . . . . . . . . . . . . 2
. . Bolt, J Stl .250−20 X 2.750 Pld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
OM-4413 Page 71
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 12-1. Main Assembly (Continued)
. . . 88 . . . . . . . . . . . . . . 200407
. . . 89 . . . . . . . . . . . . . . 198168
. . . 90 . . . . . . . . . . . . . . 198180
. . . 91 . . . . . . . . . . . . . . 181572
. . . 92 . . . . . . . . . . . . . . 198510
. . . 93 . . . . . . . . . . . . . . 198511
. . . 94 . . . . . . . . . . . . . . 190198
. . . 95 . . FUEL SEND . . 198512
. . . 96 . . . . . . . . . . . . . . 189908
. . . 97 . . . . . . . . . . . . . . 124253
. . . 98 . . . . . . . . . . . . . . 199500
. . . 99 . . . . . . . . . . . . +197835
. . 100 . . . . . . . . . . . . . 197930
. . 101 . . . . . . . . . . . . . 192477
. . 102 . . . . . . . . . . . . . 199701
. . 103 . . . . . . . . . Figure 12-2
. . 104 . . . . . . . . . . . . . 168385
. . 105 . . . . . . . . . . . . +198158
. . 105 . . . . . . . . . . . ♦198 874
. . 106 . . . . . . . . . . . . . 200653
. . 107 . . . . . . . . . . . . . 233088
. . 108 . . . . . . . . . . . . . 209330
. . . . . . . . . . . . . . . . . . . . 204773
. . . . . . . . . PLG18 . . . 131198
. . . . . . . . . . . . . . . . . . . . 194126
. . . . . . . . . . . . . . . . . . . . 209496
. . Strap, Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Support, Fuel Tank/Weld Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Tank, Fuel 13.1 Gal (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Bushing, Tank Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Ftg, Stand Pipe Hose .3125 X24.570lg 90 Deg Zinc . . . . . . . . . . . . . . .
. . . . Ftg, Stand Pipe Hose .1875x24.570lg 90 Deg Zinc . . . . . . . . . . . . . . . .
. . . . Cap, Tank Screw−on 3.500 In W/Vent W/Lanyard 8” . . . . . . . . . . . . . . .
. . . . Sender, Fuel Gauge 22.500 Deep Tank . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Valve, Drain Fuel 180 Deg Zinc Pld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Bushing, Tank Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Tank, Fuel 13.1 Gal Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Label, Warning Do Not Weld On Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Mount, Generator Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Panel, Front Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Front Panel Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Label, Warning Battery Explosion Can Blind . . . . . . . . . . . . . . . . . . . . . . . .
. . Panel, Generator Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Panel, Generator Right Stainless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Heater, Block Engine 120v 400w Kabota 905 . . . . . . . . . . . . . . . . . . . . . . . .
. . Label, Danger Using A Generator Indoors Can Kill You In Minutes . . . . .
. . Label,Available Power While Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Plug, W/Leads (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Conn, Rect Mini 045 3skt 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . .
. . Kit, Acoustical Foam Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Kit, Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
♦Optional
*Recommended Spare Parts.
+
When ordering a component originally displaying a precautionary label, the label should also be ordered. Order
label individually or as part of Label Kit 209 496.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-4413 Page 72
Notes
Start Your Professional
Welding Career Now!
400 Trade Square East, Troy, Ohio 45373
1-800-332-9448 www.welding.org
Over 80,000 trained
since 1930!
OM-4413 Page 73
Hardware is common and
not available unless listed.
46
15
45
44
1
2
3
4
9
5
10
6
11
43
7
42
8
12
41
40
36
13
14
39
37
38
16
35
34
18
19
33
20
21
22
32
31
29
30
28
17
8
24
27
26
25
23
803 270−A
Figure 12-2. Panel, Front w/Components
OM-4413 Page 74
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 12-2. Panel, Front w/Components (Figure 12-1 Item 103)
. . . 1 . . . . . . . . . . . . . . . . . . . . . . . . Nameplate (order by model and serial number) . . . . . . . . . . . . . . . . . . . . . .
. . . 2 . . . . . . . . . . . . . . 207088 . . Panel, Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 3 . . . . . . . . . . . . . . 115440 . . Stand−off, No 6−32 X .687 Lg .250 Hex Al Fem . . . . . . . . . . . . . . . . . . . . .
. . . 4 . . . . PC2 . . . . 215235 . . Circuit Card Assy, Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 207781 . . Harness, Control Power Board Interconnecting (consisting of) . . . . . . . . .
. . . . . . . . . PLG16 . . . 114655 . . . . Conn, Rect Mini 045 6skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . .
. . . . . . . . PLG12,PLG27 . . 117037 . . . . Conn, Rect Mini 045 2skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . PLG21 . . . 113750 . . . . Conn, Rect Mini 045 4skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 206794 . . Shield, Pcb Protective Anti Static 4.813x12.750 . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 207779 . . Harness, Remote Control 14pin (consisting of) . . . . . . . . . . . . . . . . . . . . . .
. . . 5 . . . . RC4 . . . . 143976 . . . . Conn, Circ Ms/Cpc 14skt Size 20 Rcpt Panel Pushin (Service Kit) . . . .
. . . . . . . . . PLG24 . . . 131054 . . . . Conn, Rect Mini 045 2skt 2row Plug Cable Lkg (Service Kit) . . . . . . . . .
. . . . . . . . . . RC23 . . . . 115093 . . . . Conn, Rect Mini 045 6skt 2row Plug Cable Lkg (Service Kit) . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 202884 . . Harness, Switch Control (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . PLG20 . . . 131198 . . . . Conn, Rect Mini 045 3skt 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . .
. . . 6 . . . . . S3 . . . . . 011609 . . . . Switch,Tgl Spdt 15a 125vac On−none−on Spd Term Chr . . . . . . . . . . .
. . . 7 . . . . PC5 . . . . 148030 . . Circuit Card Assy, Filter Hf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 8 . . . . . . . . . . . . . . 134201 . . Stand−off Support, Pc Card .312/.375w/Post&lock .43 . . . . . . . . . . . . . . .
. . . 9 . . . . . S2 . . . . . 176606 . . Switch, Ignition 4 Position W/Out Handle . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 207783 . . Harness, Wrg Interconnecting (consisting of) . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . PLG25 . . . 113752 . . . . Conn, Rect Mini 045 10skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . .
. . . . . . . . RC7,RC9 . . 136924 . . . . Conn, Rect Comm 093 2p/S 1row Rcpt Cable Lkg . . . . . . . . . . . . . . . . .
. . . 10 . . . . . S7 . . . . . 011609 . . . . Switch,Tgl Spdt 15a 125vac On−none−on Spd Term Chr . . . . . . . . . . .
. . . 11 . . . . . S6 . . . . . 021467 . . Switch, Tgl Spst 3a 250v Off−none−(On) Spd Term (Included In Ignition
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wiring Harness, See Figure 12-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 12 . . CB5,CB6 . . 083432 . . Supplementary Protector, Man Reset 1p 10a 250vac Frict . . . . . . . . . . . .
. . . 13 . . CB3,CB4 . . 093996 . . Supplementary Protector, Man Reset 1p 20a 250vac Frict . . . . . . . . . . . .
. . . 14 . . GFCI-2,GFCI-3 . 151981 . . Rcpt, Str Dx Grd 2p3w 15/20a 125v *5−20r Gfi . . . . . . . . . . . . . . . . . . . . .
. . . 15 . . . . . . . . . . . . . . 198049 . . Upright, Base Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 16 . . . . CB1 . . . 203 026 . . Supplementary Protector, Man Reset 2P 50A 240VAC . . . . . . . . . . . . . .
. . . 17 . . . . PC3 . . . . 148021 . . Circuit Card Assy, Filter Hf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 18 . . . . . . . . . . . . . . 129524 . . Term, Frict 250x032 Uninsul Male .130 Stud Mtg 3pr . . . . . . . . . . . . . . . .
. . . 19 . . . . . . . . . . . . . . 099255 . . Terminal, Pwr Output Neutral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 20 . . . . . . . . . . . . . . 083030 . . Stud, Brs .250−20 X 1.750 W/Hex Collar . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 21 . . . . . . . . . . . . . . 601836 . . Nut, 250−20 .50hex .19h Brs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 22 . . . . . . . . . . . . . . 010915 . . Washer, Flat .257idx0.640odx.031t Brs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 23 . . . . . . . . . . . . . . 188039 . . Cover, Receptacle W/Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 24 . . . . . . . . . . . . . . 203016 . . Boot, Circuit Breaker 2 Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 25 . . . . . . . . . . . . . . 021385 . . Boot, Toggle Switch Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 26 . . . . . . . . . . . . . . 206795 . . Boot, Circuit Breaker Clear Hex Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 27 . . . . . FG . . . . . 192265 . . Gauge, Fuel Elec Switch W/O Switchgage Sensor . . . . . . . . . . . . . . . . . .
. . . 28 . . . . . HM . . . . . 145247 . . Meter, Hour 12−24vdc 1.25 X 2.12 Rect . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 29 . . . . . . . . . . . . . . 119014 . . Lever, Switch Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 30 . . . . RC1 . . . . 182954 . . Rcpt, Str 3p4w 50a 125/250v Flush Mtg *14−50 . . . . . . . . . . . . . . . . . . . . .
. . . 31 . PL1,PL2,PL3 . 206879 . . Light, Ind Amber Lens 12v Snap−in Mtg .500 Mtg Hol . . . . . . . . . . . . . . . .
. . . 32 . . . . . . . . . . . . . . 181169 . . Spacer, Output Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 33 . . . . . . . . . . . . . . 180735 . . Washer, Output Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 34 . . . . . . . . . . . . . . 186621 . . Boot, Generic Output Stud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 35 . . . . . . . . . . . . . . 115493 . . Handle, Switch Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 36 . . . . . . . . . . . . . . 170391 . . Conn, Circ Ms Protective Cap Size 20 Nylon . . . . . . . . . . . . . . . . . . . . . . .
. . . 37 . . . . . . . . . . . . . . 097924 . . Knob, Pointer 1.625 Dia X .250 Id W/Set Screwsplstc . . . . . . . . . . . . . . . .
. . . 38 . . . . . . . . . . . . . . 097922 . . Knob, Pointer .875 Dia X .250 Id W/Set Screwsplstc . . . . . . . . . . . . . . . . .
. . . 39 . . . . CT1 . . . . 207786 . . Xfmr, Current Sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 40 . . . . . . . . . . . . . . 025248 . . Stand−off, Insul .250−20 X 1.250 Lg X .437 Thd . . . . . . . . . . . . . . . . . . . .
. . . 41 . . . . . . V . . . . . 164874 . . Voltmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 42 . . . . . . A . . . . . 164873 . . Ammeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 43 . . . . . S1 . . . . . 207577 . . Switch, Changeover Assy W/Leads (consisting of) . . . . . . . . . . . . . . . . . . .
. . . 44 . . . . . . . . . . . . . . 187189 . . . . Bracket, Shunt Mtg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 45 . . . . LEM . . . . 168829 . . Transducer, Current 1000a Module Max Open Loop . . . . . . . . . . . . . . . . .
1
1
3
1
1
1
2
1
1
1
1
1
1
1
1
1
1
3
1
1
1
2
1
1
2
2
2
1
1
1
1
3
1
3
3
1
1
3
4
1
1
1
1
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
OM-4413 Page 75
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 12-2. Panel, Front w/Components (Continued)
. . . 46 . . . . CT2 . . . . 209274 . . Xfmr, Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . 209831 . . Receptacles, W/Leads (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . RC29 . . . . 113751 . . . . Conn, Rect Mini 045 8skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . PLG6 . . . . 204640 . . . . Cable,Lem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . RC30 . . . . 136924 . . . . Conn, Rect Comm 093 2p/S 1row Rcpt Cable Lkg . . . . . . . . . . . . . . . . . 1
+ When ordering a component originally displaying a precautionary label, the label should also be ordered. Order
label individually or as part of Label Kit 209 496.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
Hardware is common and
not available unless listed.
7
6
8
9
5
10
4
1
3
2
11
13
12
19
14
18
15
16
17
OM-4413 Page 76
803 273
Figure 12-3. Stabilizer/Rectifier/Control Box Assembly
Item
No.
Dia.
Mkgs.
Part
No.
Description
Quantity
Figure 12-3. Stabilizer/Rectifier/Control Box Assembly (Figure 12-1 Item 22)
. . . 1 . . . . SR1 . . . . 198514 . . Rectifier, Si 3ph 350 Amp 400 Piv 100% Duty Cycle . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . 010381 . . Connector, Rectifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . 207791 . . Harness, Wrg Ignition (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 2 . . CR1,CR2 . . 173069 . . . . Relay, Encl 12vdc Spdt 30a/20a 5pin Flange Mtg . . . . . . . . . . . . . . . . . . 2
. . . 3 . . . . . 2T . . . . . 197147 . . . . Block, Term 5−4−3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . PLG5 . . . . 158465 . . . . Conn, Rect Univ 084 12p/S 3row Plug Cable Lkg . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . S6 . . . . . 021467 . . . . Switch, Tgl Spst 3a 250v Off−none−(On) Spd Term (On Front Panel,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Figure 12-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . PLG10 . . . 092670 . . . . Conn, Rect Univ 084 3p/S 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . PLG15 . . . 113751 . . . . Conn, Rect Mini 045 8skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . PLG19 . . . 113752 . . . . Conn, Rect Mini 045 10skt 2row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . PLG35 . . . 114063 . . . . Conn, Rect Univ 084 4p/S 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . PLG8 . . . . 177859 . . . . Conn, Body 5 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . 148850 . . . . Socket, Relay 5 Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . RC7 . . . . 136925 . . . . Conn, Rect Comm 093 2p/S 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . 1
. . . . . . . PLG31, PLG33 . 135134 . . . . Conn, Rect Univ 084 9p/S 3row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . PLG17 . . . 066104 . . . . Conn, Rect Univ 084 6p/S 3row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . RC32 . . . . 148389 . . . . Conn, Rect Univ 084 4p/S 1row Rcpt Cable/Panel Lkg . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . 187654 . . . . Seal, Wire Univ 12p/S 3row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . PLG34 . . . 150316 . . . . Conn, Rect Univ 039 6p/S 3row Plug Cable Lkg . . . . . . . . . . . . . . . . . . . 1
. . . 4 . . . . . . . . . . . . . . 004214 . . Bushing, Snap−in Nyl 1.625 Id X 2.000 Mtg Hole . . . . . . . . . . . . . . . . . . . . 1
. . . 5 . . . . . . . . . . . . . . 097132 . . Stand−off, No 6−32 X .375 Lg .250 Hex Brs M&f . . . . . . . . . . . . . . . . . . . . 10
. . . 6 . . . . PC1 . . . . 212701 . . Circuit Card Assy, Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 7 . . . . . . . . . . . . . . 209355 . . Cover, PCB Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 8 . . . . C25 . . . . 176007 . . Capacitor, Elctlt 1200 Uf 300 Vdc Can 1.37 Dia . . . . . . . . . . . . . . . . . . . . . 1
. . . 9 . . . . PC7 . . . . 203130 . . Circuit Card Assy, Gen Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 10 . . . . . R1 . . . . . 188067 . . Resistor, Ww Fxd 100 W 200 Ohm W/Clips . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 11 . . . . . . . . . . . . . +207803 . . Bracket, Mtg Pc Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 12 . . . . . . . . . . . . . . 200263 . . Label, Warning Electric Shock Hazard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 13 . . . . . . . . . . . . . . 202331 . . Gasket, Capacitor Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 14 . . . . . . . . . . . . . . 204166 . . Bracket, Capacitor Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 15 . . . . DC-Z . . . . 207664 . . Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 16 . . . . . . . . . . . . . . 207733 . . Frame, Mtg Stab/Rect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 17 . . . . . 1T . . . . . 172661 . . Block, Stud Connection 6 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
. . . 18 . . . . . . . . . . . . . . 173734 . . Link, Jumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . 19 . . . . . . . . . . . . . . 207735 . . Bracket, Mtg Rectifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
+ When ordering a component originally displaying a precautionary label, the label should also be ordered. Order
label individually or as part of Label Kit 209 496.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-4413 Page 77
Item
No.
Part
No.
Description
Quantity
Figure 12-4. Generator (Figure 12-1 Item 36)
. . . 1 . . . . . . . . . . . . . . 217046
. . . 2 . . . . . . . . . . . . . . 216532
. . . 3 . . . STATOR . . +207637
. . . 4 . . . . . . . . . . . . . . 013367
. . . 5 . . . ROTOR . . . 207591
. . . 6 . . . . . . . . . . . . . . 181143
. . . 7 . . . . . . . . . . . . . . 192600
. . . 8 . . . . . . . . . . . . . . 159918
. . . 9 . . . . . . . . . . . . . . 193515
. . . 10 . . . . . . . . . . . . . . 170861
. . . 11 . . . BRUSH . . . 205725
. . . . . . . . . . . . . . . . . . . . 207640
. . . . . . . . . PLG32 . . . 114063
. . . 12 . . . . . . . . . . . . . . 010910
. . . 13 . . . . . . . . . . . . . . 010909
. . Endbell (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Ring, Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Stator, Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Label, Moving Parts Can Cause Serious Injury . . . . . . . . . . . . . . . . . . . . . .
. . Rotor, Generator (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Bearing, Ball Rdl Sgl Row .984 X 2.047 X .591 . . . . . . . . . . . . . . . . . . . .
. . . . Fan, Rotor Gen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Baffle, fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Adapter, Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Stud, Stl .375−16 X 17.375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Brushholder Assy, Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . Plug, W/Leads Brushholder (consisting of) . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . Conn, Rect Univ 084 4p/S 1row Plug Cable Lkg . . . . . . . . . . . . . . . . . . .
. . Washer, Flat .406 ID x 0.812 OD x .065t Stl Pld Ansi .375 . . . . . . . . . . . .
. . Nut, .375-16 .56 hex .46h Stl Pld Elastic Stop . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
1
1
1
4
2
1
1
4
4
Hardware is common and
not available unless listed.
8
5
9
7
6
4
3
10
1
2
11
12
13
803 271
Figure 12-4. Generator
+
When ordering a component originally displaying a precautionary label, the label should also be ordered. Order
label individually or as part of Label Kit 209 496.
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-4413 Page 78
Effective January 1, 2009
(Equipment with a serial number preface of LK or newer)
Warranty Questions?
Call
1-800-4-A-MILLER
for your local
Miller distributor.
Your distributor also gives
you ...
Service
You always get the fast,
reliable response you
need. Most replacement
parts can be in your
hands in 24 hours.
Support
Need fast answers to the
tough welding questions?
Contact your distributor.
The expertise of the
distributor and Miller is
there to help you, every
step of the way.
This limited warranty supersedes all previous Miller warranties and is exclusive with no other
guarantees or warranties expressed or implied.
LIMITED WARRANTY − Subject to the terms and conditions
* Induction Heating Coils and Blankets, Cables, and
below, Miller Electric Mfg. Co., Appleton, Wisconsin, warrants to
Non-Electronic Controls
its original retail purchaser that new Miller equipment sold after
* APT & SAF Model Plasma Cutting Torches
the effective date of this limited warranty is free of defects in
* Remote Controls
material and workmanship at the time it is shipped by Miller. THIS
* Accessory (Kits)
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
* Replacement Parts (No labor)
WARRANTIES OF MERCHANTABILITY AND FITNESS.
* Spoolmate Spoolguns
Within the warranty periods listed below, Miller will repair or
* Canvas Covers
replace any warranted parts or components that fail due to such
defects in material or workmanship. Miller must be notified in
writing within thirty (30) days of such defect or failure, at which
time Miller will provide instructions on the warranty claim
procedures to be followed.
Miller shall honor warranty claims on warranted equipment listed
below in the event of such a failure within the warranty time
periods. All warranty time periods start on the delivery date of the
equipment to the original end-user purchaser, and not to exceed
one year after the equipment is shipped to a North American
distributor or eighteen months after the equipment is shipped to
an International distributor.
1.
2.
3.
4.
5.
5 Years Parts — 3 Years Labor
* Original main power rectifiers only to include SCRs,
diodes, and discrete rectifier modules
3 Years — Parts and Labor
* Transformer/Rectifier Power Sources
* Plasma Arc Cutting Power Sources
* Process Controllers
* Semi-Automatic and Automatic Wire Feeders
* Inverter Power Sources (Unless Otherwise Stated)
* Water Coolant Systems (Integrated)
* Intellitig
* Engine Driven Welding Generators
(NOTE: Engines are warranted separately by the
engine manufacturer.)
1 Year — Parts and Labor Unless Specified
* Motor Driven Guns (w/exception of Spoolmate
Spoolguns)
* Positioners and Controllers
* Automatic Motion Devices
* RFCS Foot Controls
* Induction Heating Power Sources, Coolers, and
Electronic
Controls/Recorders
* Water Coolant Systems (Non-Integrated)
* Flowgauge and Flowmeter Regulators (No Labor)
* HF Units
* Grids
* Spot Welders
* Load Banks
* Fume Extractors
* Arc Stud Power Sources & Arc Stud Guns
* Racks
* Running Gear/Trailers
* Plasma Cutting Torches (except APT & SAF
Models)
* Field Options
(NOTE: Field options are covered under True Blue®
for the remaining warranty period of the product they
are installed in, or for a minimum of one year —
whichever is greater.)
* Bernard-Branded Mig Guns (No Labor)
* Weldcraft-Branded TIG Torches (No Labor)
* Subarc Wire Drive Assemblies
6 Months — Batteries
90 Days — Parts
* MIG Guns and Subarc (SAW) Guns
Miller’s True Blue® Limited Warranty shall not apply to:
1.
Consumable components; such as contact tips,
cutting nozzles, contactors, brushes, slip rings,
relays or parts that fail due to normal wear.
(Exception: brushes, slip rings, and relays are
covered on Bobcat, Trailblazer, and Legend
models.)
2.
Items furnished by Miller, but manufactured by others,
such as engines or trade accessories. These items are
covered by the manufacturer’s warranty, if any.
Equipment that has been modified by any party other
than Miller, or equipment that has been improperly
installed, improperly operated or misused based upon
industry standards, or equipment which has not had
reasonable and necessary maintenance, or equipment
which has been used for operation outside of the
specifications for the equipment.
3.
MILLER PRODUCTS ARE INTENDED FOR PURCHASE AND
USE BY COMMERCIAL/INDUSTRIAL USERS AND PERSONS
TRAINED AND EXPERIENCED IN THE USE AND
MAINTENANCE OF WELDING EQUIPMENT.
In the event of a warranty claim covered by this warranty, the
exclusive remedies shall be, at Miller’s option: (1) repair; or (2)
replacement; or, where authorized in writing by Miller in
appropriate cases, (3) the reasonable cost of repair or
replacement at an authorized Miller service station; or (4)
payment of or credit for the purchase price (less reasonable
depreciation based upon actual use) upon return of the goods at
customer’s risk and expense. Miller’s option of repair or
replacement will be F.O.B., Factory at Appleton, Wisconsin, or
F.O.B. at a Miller authorized service facility as determined by
Miller. Therefore no compensation or reimbursement for
transportation costs of any kind will be allowed.
TO THE EXTENT PERMITTED BY LAW, THE REMEDIES
PROVIDED HEREIN ARE THE SOLE AND EXCLUSIVE
REMEDIES. IN NO EVENT SHALL MILLER BE LIABLE FOR
DIRECT,
INDIRECT,
SPECIAL,
INCIDENTAL
OR
CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF
PROFIT), WHETHER BASED ON CONTRACT, TORT OR ANY
OTHER LEGAL THEORY.
ANY EXPRESS WARRANTY NOT PROVIDED HEREIN AND
ANY
IMPLIED
WARRANTY,
GUARANTY
OR
REPRESENTATION AS TO PERFORMANCE, AND ANY
REMEDY FOR BREACH OF CONTRACT TORT OR ANY
OTHER LEGAL THEORY WHICH, BUT FOR THIS
PROVISION, MIGHT ARISE BY IMPLICATION, OPERATION
OF LAW, CUSTOM OF TRADE OR COURSE OF DEALING,
INCLUDING
ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR
PURPOSE, WITH RESPECT TO ANY AND ALL EQUIPMENT
FURNISHED BY MILLER IS EXCLUDED AND DISCLAIMED
BY MILLER.
Some states in the U.S.A. do not allow limitations of how long an
implied warranty lasts, or the exclusion of incidental, indirect,
special or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty provides specific
legal rights, and other rights may be available, but may vary from
state to state.
In Canada, legislation in some provinces provides for certain
additional warranties or remedies other than as stated herein,
and to the extent that they may not be waived, the limitations and
exclusions set out above may not apply. This Limited Warranty
provides specific legal rights, and other rights may be available,
but may vary from province to province.
miller_warr 2009−01
Owner’s Record
Please complete and retain with your personal records.
Model Name
Serial/Style Number
Purchase Date
(Date which equipment was delivered to original customer.)
Distributor
Address
City
State
Zip
For Service
Contact a DISTRIBUTOR or SERVICE AGENCY near you.
Always provide Model Name and Serial/Style Number.
Contact your Distributor for:
Welding Supplies and Consumables
Options and Accessories
Personal Safety Equipment
Service and Repair
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Replacement Parts
Training (Schools, Videos, Books)
Technical Manuals (Servicing Information
and Parts)
Circuit Diagrams
For International Locations Visit
www.MillerWelds.com
Welding Process Handbooks
To locate a Distributor or Service Agency visit
www.millerwelds.com or call 1-800-4-A-Miller
Contact the Delivering Carrier to:
File a claim for loss or damage during
shipment.
For assistance in filing or settling claims, contact
your distributor and/or equipment manufacturer’s
Transportation Department.
ORIGINAL INSTRUCTIONS − PRINTED IN USA
International Headquarters−USA
USA Phone: 920-735-4505 Auto-Attended
USA & Canada FAX: 920-735-4134
International FAX: 920-735-4125
© 2009 Miller Electric Mfg. Co.
2009−01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising