Goodmans | GDSPKBT10 | User guide | Goodmans GDSPKBT10 Bluetooth Speaker User Guide

Goodmans GDSPKBT10 Bluetooth Speaker User Guide
BLUETOOTH SOUNDTOWER
MODEL: GDTSPK02BLK
2.1 CHANNEL SOUNDTOWER WITH BLUETOOTH
USER MANUAL
Content
............................................................................................................................................................1
SPECIFICATION/ACCESSORIES
WARNING.........................................................................................................................................2
INSTALLATION................................................................................................................................4
PANELS..............................................................................................................................................5
REMOTE CONTROL........................................................................................................................6
BASIC OPERATION.........................................................................................................................7
FM OPERATION...............................................................................................................................8
BLUETOOTH OPERATION.............................................................................................................9
AUDIO OPERATION......................................................................................................................10
USB OPERATION............................................................................................................................11
TROUBLE SHOOTING...................................................................................................................12
IMPORTANT INFORMATION........................................................................................................13
Specification
Power supply
Max. power consumption
Input joint
Frequency
Audio output
Bluetooth effective distance
Bluetooth edition
Operating conditions
AC 220V-240V~50Hz
60W
Aux in, USB
87.5MHz-108.0MHz
2x10W+25W RMS (10%THD)
10meters in open air
CSR 2.1 +EDR
Temperature : 5 C~35 C (Max.75%RH)
Installation : on a flat horizontal surface
Accessories
DISPLAY
USER MANUAL
1* Remote Control
1* Audio cable
1* User Manual
1
1* Power Cable
Warning
1. Read these Instructions - All the safety and operating instructions should be read before this product is
operated.
2. Keep these Instructions - The safety and operating instructions should be retained for future reference.
3. Heed all Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions - All operating and use instructions should be followed.
5. Do not use this apparatus near water- The appliance should not be used near water or moisture - for
example, in a wet basement or near a swimming pool, and the like.
6. Clean only with a damp cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat Registers, stoves, or other apparatus
(including amplifiers)that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug the apparatus during lightning storms or when unused for long periods of time.
12. Refer all serving to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture.
13. Please keep the unit in a good ventilation environment.
14.These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
15. The MAINS PLUG is used as disconnect device, the disconnect device shall remain readily operable.
16.
This equipment is a Class II or double insulated electrical appliance. It has been designed
in such a way that it does not require a safety connection to electrical earth.
17.
- This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulatd dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no
userserviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance in the literature accompanying the appliance.
18. The batteries in remote control shall not be exposed or excessive heat such as sunshine, fire or the like.
19. The apparatus shall not be exposed to dripping or slashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
20. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
21. The battery (battery of batteries or battery pack) shall not be exposed to excessive heat, sunshine or fire.
22. A warning that excessive sound pressure from earphones and headphones can cause hearing loss.
2
Safety Instructions
Please read and understand all the warnings provided below, as well as and those marked
on the unit. This unit has been designed and manufactured to assure personal safety.
Only use power source that is specified
in the User Manual or on the system.
Keep the unit and power plug
away from water.
Avoid placing the unit in direct
or sunshine or near a heat source.
Never open the cover and avoid dropping
anything into the unit, such as coins,
hairpins and needles for example.
Do not bend or pull the power cable
excessively, and do not apply pressure
to it by standing on it.
Unplug the unit from the main power
outlet when you do not use it for a long
time.
ERP II (Energy related products note)
This product complies with the European Commission on the Eco-design Directive and
its implementing Regulations-Energy related products. 15 minutes (approx.) later without
any input ( expect in FM mode), the system will automatically enter standby mode.
Follow up the instruction manual to assume the function operation.
3
Installation Instructions
(DESIGN SKETCH)
(INSTALLATION SKETCH MAP)
Note:
Please tear off
the protective
film before use
Case
Base Plate
Fixed Screw of Base Plate
4
Panel Controls
PANELS
USB PORT
PREVIOUS
STANDBY
FAST FORWARD
FAST REWIND
NEXT
STOP
VOLUME -/+
PLAY/PAUSE
SOURCE
AUDIO INPUT
L/R AUDIO IN SOCKET
FM ANTENNA
R
AUDIO IN
L
AUDIO IN
5
Remote control
1. Align the remote control directly at the remote control sensor of the device.
2. The range of the remote control depends on the charge of the battery.
3. Bright light (sun or artificial light) should not fall directly at the remote control
sensor. Bright light can negative influence the efficacy of the remote control.
4. Make sure that there are no obstacles between the remote control and the
remote control sensor.
MUTE
STANDBY
BLUETOOTH
USB
AUDIO
VOLUME+
PREVIOUS
NEXT
PLAY/PAUSE
VOLUME-
DISPLAY
DISPLAY
STOP
FAST FORWARD
REPEAT
FAST REWIND
FM
MONO/STEREO
SAVE
SEARCH
NUMBER BUTTONS
9
FREQUENCY
6
Basic Operation
PREPARATION
1) Before the unit is turned on, please check if all the connections are right and safe.
Then connect the main power.
2) Press the POWER ON/OFF button on the back panel to turn on the main power.
3) Press the STANDBY button to turn on the unit or to the standby mode.
SOURCE BUTTON
Press SOURCE button on the front panel to switch to BT, AUX, USB, or FM mode. Or,
press the USB, FM, AUDIO, or BT button on remote control to select the mode.
MUTE BUTTON
If you press the MUTE button while playing, sound signal will not be heard. Press the
MUTE button again or the VOL+/- buttons to resume the previous volume level.
VOLUME SETTING
Press the VOL.+/- buttons to turn the volume up or down.
PREVIOUS AND NEXT
Press the 9
or :
button to skip to the previous or next track/station/frequency.
FAST FORWARD AND FAST REWIND
Press the 7
or 8
button to rewind or forward the track. Press again to resume normal.
NUMBER BUTTONS
Press the NUMBER buttons to select the track/station/frequency.
PLAY/PAUSE BUTTON
Press the button to pause the music, press again to resume playing.
STOP BUTTON
Press the STOP button to stop playing, press PLAY/PAUSE button to re-start.
REPEAT BUTTON
Press the REPEAT button to select the repeat mode: Repeat One, Repeat All, Repeat off.
DISPLAY
Press the DISPLAY button to turn on or off the display screen.
7
FM operation
1.The range of FM frequency is from 87.50MHz to 108.00MHz.
2. Press SOURCE button or FM button to enter FM mode.
3. Extend the antenna as far as it can to get the best reception. Vary the antenna direction
to find the strongest signal for each station.
4. Press MO/ST button on remote control to turn on or off the stereo. If the reception is
not good enough, it can turn on the stereo.
SEARCH
Press SEARCH button to search stations from low to high frequency; press again to
stop searching. After searching all the stations, it starts playing from the first station.
SELECT STATIONS
1) Press FAST REWIND or FAST FORWARD button to adjust the frequency up or
down a step of 0.05 MHZ.
2) Press NUMBER buttons directly to selection the stations.
E.g. to play the station 24, press 2, then press 4 to skip to station 24.
3) Press -/-- button, then press NUMBER buttons on remote to select frequency.
E.g. to select 108.50MHz, press -/-- button, then press 1, 8, 5, 0 to enter 108.50MHz.
4) Press PREVIOUS or NEXT button to skip to the previous or next station.
SAVE STATIONS
1) Press NUMBER buttons to select the preset number for saving the wanted station.
2) Press -/-- button and number buttons to select the frequency.
3) Press SAVE button to save the wanted station/frequency into the preset number.
E.g. to save the station 88.50MHz into preset 13, press 1, 3 to select preset 13, then
press -/-- and next press 8, 8, 5, 0 to select 88.50MHz, at last press SAVE button.
8
Bluetooth operation
BLUETOOTH PAIRING
1. Put the Bluetooth device (e.g. smart phone) within the 10m Bluetooth search range.
Then turn on the Bluetooth function on the phone.
2. Press BLUETOOTH button on remote or press SOURCE button on the panel to
enter Bluetooth mode. The indicator flashes blue quickly in pairing status.
3. Enter the Bluetooth searching interface on the phone and start to search the devices.
4. Select the device name GDTSPK02 from the search list. If they are paired successfully,
there comes a audible signal and the indicator lit steadily in blue.
5. Some device may ask you to select OK/YES/PAIR to pair the phone with the unit.
And some even ask to input the password, just input “0000" (four Zero) to pair.
6. To disconnect the device and connect to a different device:
Turn off the Bluetooth function on your device and un-pair the unit with the BT
device. Then follow the pairing Steps 2-5 to pair with a new device.
Please follow the BASIC OPERATION to control the playback on Bluetooth mode.
To receive a phone call while playing music:
• When a call is received while playing music through a phone, the music will stop
automatically.
• When the call ends, depending on the setting of your phone, the current track may
resume playback.
NOTE:
1. Some devices, such as an iPhone, connect immediately after pairing so the indicator
remains on.
2. The unit can only connect with one device at a time and the unit memorizes the last
paired device the next time turning on the Bluetooth mode.
3. If the device is out of Bluetooth range (10m), put the device within the BT search
range and make connection again manually if it is suspended.
9
Audio operation
Before connecting with the music devices, pay attention to the picture below.
1. Each connection must be safe and firm. Disconnect the power cable before you have
finished all the connections.
2. The unit can connect with the DVD player/MP3 player/Smart phone/Computer or
other music device via a audio cable.
DVD Player
MP3 player
Select one of the below connections
1. Connect one end of 3.5mm audio cable to
the Mp3 player’s line output/headphone
and the other end to the AUDIO L/R
sockets on the rear panel of the unit.
2. Connect one end of 3.5mm audio cable to
the unit’s AUDIO IN socket and the other
end to the DVD player’s L/R AUDIO
OUTPUT sockets on the rear panel of the
unit.
Operation
1. Press SOURCE button or AUDIO button
to enter the audio mode.
2. Control the playback only by the DVD/MP3
player.
3. If the AUDIO IN and L/R AUDIO IN sockets are connected at the same time, the
device connected with AUDIO IN socket is prior to play.
R
AUDIO IN
10
L
AUDIO IN
USB connection
USB OPERATION
1. Insert USB stick to the USB port to connect with this unit.
2. Press SOURCE button or USB button to enter USB mode.
3. Once the unit detects the USB stick, it starts playing music automatically.
4. Please refer to BASIC OPERATION for playback control.
Note:
1. Depending on the amount of data and media speed, it may take longer time to read
files stored in the USB device. In some cases, reading time may be as long as 60
seconds. This is not a malfunction.
2. The supported files format is Mp3 with an extended name “.mp3".
3. For some music files, even when they are in a supported format, the unit may be
unable to play because of the format compatibility.
11
Trouble shooting
For your convenience, we have listed some methods to solve common problems you
may encounter when you use the system. If the problem occurs repeatedly, contact
the nearest maintenance center.
Power supply can not be turned on
* Make sure that the power cord is fully inserted in the power outlet.
The remote control does not work
* Battery is used up
* The front end of the remote control is not aimed at the infrared reception part of the
player.
No sound
* Make sure that the audio cable is connected correctly and securely to the back of
your unit and to the sound system.
* Make sure that the sound system is set to the correct audio input.
* Turn your unit off, then back on.
The unit does not work at all
* The embedded microcomputer may have failed because of a lightning strike, static,
or other interference.
12
Important information
Waste Electrical and Electronic Equipment Directive
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances
must not be disposed of in the normal unsorted municipal waste stream.
Correct disposal of this product
Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and
the environment. The crossed out “wheeled bin” symbol reminds you of your
obligation, that when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning
the correct disposal of their old appliance. This marking indicates that this product
should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for
environmental safe recycling.
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising