Petsafe | 62358 | Use Guide | Petsafe 62358 Happy Ride™ Cargo Area Dog Barrier Use Guide

Petsafe 62358 Happy Ride™ Cargo Area Dog Barrier Use Guide
Cargo Area Net Pet Barrier
Care & Use Guide
Thank you for your purchase of the Sta-Put™ Cargo Area Net Pet Barrier. This barrier is designed for installation
behind the middle or third row bench seat in all vehicles with headrests.
WARNING: The mesh barrier is attached to a coiled metal frame which might “pop open” when removed from the
pouch - remove carefully in an open area. The pouch should contain the mesh barrier and a support rod.
Installation: To ease installation, consider raising each head rest to clearly expose the metal headrest posts (they can
be returned to their normal position after installation). Allow the mesh barrier to “pop open” to its natural, rectangular
shape. Assemble the support rod with the coupler between the two straight sections. Insert one end of the support rod
into the small “pocket” at the bottom edge of the barrier. While bending the support rod slightly, insert the other end
into the pocket at the top edge of the barrier.
On each end of the barrier are two cinch straps – a lower set for
attaching to the headrest post, and an upper set for looping around the
head rest cushion. With the support rod on the “front facing” side of the
barrier, wrap the upper straps over the headrest cushions and loop back
through the cinch straps under the cushions. Leave these straps loosely
connected for now. Next, thread the lower straps around the outer
headrest posts and loop back through the cinch rings. Tighten each
cinch strap so the barrier is centered between the two headrests.
Optional: If the bench seat has a split in the back, the Sta-Put™ tube
can be used for additional stability. Run the strap through the split to
the front side of the seat and push the plastic tube into the space between
the seat back and seat bottom (see image below). Tighten the Sta-Put™
strap so the bottom edge of the barrier rests firmly against the back of
the seats (it might be necessary to hold the Sta-Put™ tube in place when
adjusting the strap). The Sta-Put™ tube can be removed with a strong
tug, but should stay in place under normal conditions.
To “fold down” the barrier for storage, remove the support rod, then while holding the
left and right sides, twist hands in opposite directions while bringing hands together.
The wire frame should form three concentric circles. Align the circles then place
barrier in the storage pouch. Handle carefully as the barrier can “pop open” if not
held in this stowed position.
Cleaning: Wipe with damp cloth or sponge and mild cleaner. No machine wash.
Warranty: The Cargo Area Net Pet Barrier is warranted to be free from
defects in materials or workmanship for a period of one (1) year from the
date of purchase. A copy of the original sales receipt is required for warranty issues.
Solvit Products is dedicated to offering innovative solutions to improve pets’ quality
of life. Check out our website for more information. Please feel free to contact us with and questions, comments, or
warranty issues. Thank you for your purchase!
SOLVIT Products, LP  1114 W Harris Rd, Suite 101  Arlington, TX 76001
Tel: 866-6-SOLVIT (866-676-5848)  Fax: (817) 466-2291
Email: 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF