Uniden | JRT2002 | Owner Manual | Uniden JRT2002 Owner Manual

Uniden JRT2002 Owner Manual
Color profile: Disabled
Composite Default screen
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . 2
CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Included in Your Package . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• Important Electrical Considerations . . . . . . . . . . . . . . . . . . 6
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:01 1999
Installing and Adjusting Your Phone . . . . . . . . . . . . . 8
• Installation Considerations . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Adapter Safety Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Desk/Tabletop Installation. . . . . . . . . . . . . . . . . . . . . . . . . 10
• Wall Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Installing the Handset Battery Pack. . . . . . . . . . . . . . . . . . 17
• Charging the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . 18
• Cleaning the Battery Contacts . . . . . . . . . . . . . . . . . . . . . . 18
• Setting the Pulse/Tone Switch. . . . . . . . . . . . . . . . . . . . . . 19
• Adjusting the Ringer and volume Controls . . . . . . . . . . . . 19
• Automatic Digital Code Security . . . . . . . . . . . . . . . . . . . . 20
Using Your New Phone . . . . . . . . . . . . . . . . . . . . . . . 21
• Making and Receiving Calls. . . . . . . . . . . . . . . . . . . . . . . . 21
• Flash and Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
• Storing a Phone Number in Memory . . . . . . . . . . . . . . . . 22
• Editing a Phone Number in Memory . . . . . . . . . . . . . . . . 23
• Erasing a Number from Memory . . . . . . . . . . . . . . . . . . . 24
• Using Memory Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• Chain Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
• Using Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• Using the Tone Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• Selecting a Different Channel . . . . . . . . . . . . . . . . . . . . . . 31
• Traveling Out-of-Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
• Quick Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Introduction
Installing and
Adjusting
Using Your
New Phone
Troubleshooting
Specifications
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Citizen Electronics Portable Product Warranty . . . . 36
I.C. Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
1
Color profile: Disabled
Composite Default screen
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, these basic safety precautions should always be followed to
reduce the risk of fire, electrical shock, and injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a dry cloth for cleaning without
liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table. The telephone may fall, causing
serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
protect the product from overheating, these openings must not be blocked or covered. This
product should never be placed near or over a radiator or heat register. This product should
not be placed in a built-in installation unless proper ventilation is provided.
7. This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your dealer or
local power company.
8. Do not allow anything to rest on the power cord. Do not locate this product where the cord
will be damaged by persons walking on it.
9. Do not overload wall outlets and extension cords, as this can result in the risk of fire or
electrical shock.
10. Never push objects of any kind into this product through cabinet slots, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product. Take it to qualified
service personnel when service or repair work is required. Opening or removing covers
may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A.
B.
C.
When the power supply cord is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
2
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:01 1999
Color profile: Disabled
Composite Default screen
D.
E.
F.
If the product does not operate normally when following the operating instructions.
(Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive
repair work by a qualified technician.)
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of the leak.
▼
Additional Battery Safety Precautions
Caution! To reduce the risk of fire or injury to persons by the battery, read and follow
these instructions:
1. Use only the appropriate type and size battery pack specified in the reference guide.
2. Do not dispose of the battery pack in a fire. The cell may explode.
3. Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if swallowed.
4. Exercise care in handling the battery in order not to short the battery with conducting
materials such as rings, bracelets, and keys. The battery or conductor may overheat and
cause burns.
5. Charge the battery pack provided with or identified for use with this product only in accordance with
the instructions and limitations specified in the reference guide provided for this product.
6. Observe proper polarity orientation between the battery pack and battery charger.
▼
Cordless Telephone Privacy
Note!
Cordless telephones are radio devices. Communications between the handset and base
of your cordless telephone are accomplished by means of radio waves which are
broadcast over the open airways. Because of the inherent physical properties of radio
waves, your communications can be received by radio receiving devices other than
your own cordless telephone unit. Consequently, any communications using your
cordless telephone may not be private.
3
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:02 1999
Color profile: Disabled
Composite Default screen
INTRODUCTION
TO YOUR NEW PHONE
Introduction
WELCOME
Congratulations on your purchase of the Citizen JRT 2002 telephone.
This phone is designed for reliability, long life, and outstanding
performance.
FEATURES
• 900 MHz Technology
• Call Waiting Caller ID
• 3-line Backlit Display
• 30 Number Caller ID Memory
• Face Up/Face Down Charging
• 10 Memory Dial Locations
• 32 Digit Redial
• Pulse/Tone Dialing
• Page
• 7 Hour Talk Time
• Handset Earpiece and Ringer
Volume Control
• Hearing Aid Compatible
The JRT 2002 features include AutoTalkTM and AutoStandbyTM AutoTalk
allows you to answer a call by just removing the handset from the base
so you don’t have to waste time pushing buttons or flipping switches.
AutoStandby allows you to hang up by simply returning the handset to
the base.
The UltraClear Plus true compander circuitry virtually eliminates
background noise. This innovative technology, together with 40
different channels, provides you with the best possible reception during
all your conversations.
To protect you against misbilled calls which might result from your phone
being activated by other equipment, the JRT 2002 has Random Code™
digital security which automatically selects one of over 65,000 digital
security codes for the handset and base. Also, the AutoSecure™ feature
electronically locks your phone when the handset is in the base.
To get the most from your phone, please read this reference guide thoroughly.
Also, be sure to complete the product registration form and mail it in.
AutoTalk, AutoStandby, Random Code, and AutoSecure are proprietary trademarks of Uniden America Corporation.
4
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:02 1999
Color profile: Disabled
Composite Default screen
INCLUDED IN YOUR PACKAGE
TIP
To get the most from your
phone, please read this
reference guide thoroughly.
Base
Handset
Rechargeable Battery
Telephone Cord
AC Adapter
5
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:05 1999
Color profile: Disabled
Composite Default screen
IMPORTANT ELECTRICAL CONSIDERATIONS
WARNING
Please do not attempt
to unplug any
appliance during an
electrical storm.
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
Industry Canada Wants You To Know
Changes or modifications to this product not expressly approved by the
manufacturer, or operation of this product in any way other than as
detailed by the reference guide, could void your authority to operate
this product. The equipment cannot be used on public coin phone
service provided by the telephone company.
Range
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications set
forth by Industry Canada. We have rated this phone to operate at a
maximum distance with the qualification that the range depends upon
the environment in which the telephone is used. Many factors limit
range, and it would be impossible to include all the variables in our
rating. The Maximum Range rating of this phone is meant to be used
as a means of comparison against other range claims.
Telephone Line Problems
Industry Canada has granted the telephone company the right to
disconnect service in the event that your phone causes problems on the
telephone line. Also, the telephone company may make changes in
facilities and services which may affect the operation of your unit.
However, your telephone company must give adequate notice in
writing prior to such actions to allow you time for making necessary
arrangements to continue uninterrupted service.
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your problem.
If you determine that it is the cause, you must leave it disconnected
until the trouble has been corrected.
6
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:05 1999
Color profile: Disabled
Composite Default screen
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This interference
is caused by an external source such as a TV, refrigerator, vacuum
cleaner, fluorescent lighting, or electrical storm. Your unit is NOT
DEFECTIVE. If these noises continue and are too distracting, please
check around your home to see what appliances may be causing the
problem. In addition, we recommend that the base not be plugged into
a circuit that also powers a major appliance because of the potential for
interference. Be certain the antenna is kept in the vertical position.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change to
a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate
the interference.
More Than One Cordless Telephone
If you want to use more than one cordless telephone in your home,
they must operate on different channels. Press the channel key to select
a channel that provides the clearest communication.
7
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:06 1999
Color profile: Disabled
Composite Default screen
INSTALLATION CONSIDERATIONS
AND ADJUSTING YOUR PHONE
INSTALLING
Selecting a Location
8
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:06 1999
Before choosing a location for your new phone, there are some
important guidelines you should consider:
• The location should be close to both a phone jack and continuous power
outlet. (A continuous power outlet is an AC outlet which does not have
a switch to interrupt its power.)
• Keep the base and handset away from
sources of electrical noise such as motors or
fluorescent lighting.
• Be sure there is sufficient space to fully
extend the base antenna.
• The base can be placed on a desk or tabletop
or mounted on a standard wall plate.
• You should charge your new phone for 15-20
hours before completing the installation or using the handset.
Telephone Line Outlets
There are two types of phone outlets:
▼
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords
are fitted with a molded plastic connector which plugs into this type of
jack. If you do not have modular phone jacks, contact your local
telephone company for information about their installation.
▼
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of installation
is not difficult; however, you should contact your local telephone
dealer or a telephone supply store for advice about the proper adapter
or converter for your particular situation.
Color profile: Disabled
Composite Default screen
Connecting the Telephone Cords
Consider these safety guidelines before connecting the
telephone cords:
Place the power cord so that
it does not create a trip
hazard or where it could
become chafed and create
an electrical hazard
or fire.
Caution!
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
• Use caution when installing or modifying telephone lines.
Applying Power to the Base
HINT
Before using your phone,
fully charge the NickelCadmium battery pack for
15-20 hours.
This phone requires an AC outlet, without a switch to interrupt power,
and the included AC adapter. To relieve strain on the DC plug when the
phone is placed on a desk or table, wrap the power cord around the
strain relief notch on the bottom of the base.
ADAPTER SAFETY FEATURES
If the AC adapter furnished with this phone has a polarized line plug (a
plug having one blade wider than the other), this plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into
the outlet, try reversing the plug.
Do not alter the shape of the
blades of the polarized plug!
NOTE: If you cannot plug the
AC adapter into the outlet,
contact someone about
replacing the outlet.
Plug the AC Adapter into a
standard 120 VAC wall outlet.
Do not use an outlet controlled
by a wall switch. Use only the AC
Adapter supplied with this phone.
AC
ADAPTER
Wide
Blade
9
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:08 1999
Color profile: Disabled
Composite Default screen
Installing and Adjusting Your Phone
DESK/TABLETOP INSTALLATION
TIP
When choosing a location for
your phone, keep the base unit
and the handset away from
electrical noise caused by
objects like motors and
fluorescent lighting.
!
Before you plug the other end
of the telephone cord into the
modular jack on the wall,
charge the battery (refer to
“Charging the Battery Pack,”
page 18).
1) Plug the AC adapter cord into the
DC input jack on the back of
the base, then place the AC
adapter cord inside the molded
strain relief.
2) Plug one end of the long
telephone cord into the TEL LINE
jack on the base, then place the
telephone cord into the right
molded channel cord holder.
3) Plug the other end of the long
telephone cord into the telephone
wall jack. (Remember, the phone
must be fully charged before you
can use it.)
10
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:10 1999
Color profile: Disabled
Composite Default screen
4) Plug the AC adapter into a
standard 120 VAC wall outlet.
Place the power cord so that
it does not create a trip
hazard or where it could
become chafed and create
an electrical hazard
or fire.
HINT
Use only the AC adapter supplied with this phone and
DO NOT use an outlet controlled by a wall switch.
5) Raise the antenna to a
vertical position.
Before using your phone,
fully charge the NickelCadmium battery pack for
15-20 hours.
WALL INSTALLATION
▼
Setting the Handset Retainer for Wall Mounting
1) Remove the handset retainer on
the base by sliding it upward.
2) Flip the handset retainer over so
the tab is facing up.
11
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:11 1999
Color profile: Disabled
Composite Default screen
3) Slide the handset retainer back
onto the base.
!
DO NOT use an outlet
controlled by a wall switch.
▼
Standard Wall Plate Mounting
This phone can be mounted on any standard wall plate.
1) Plug the AC adapter into the DC
input jack on the back of the
base, then place the AC adapter
cord inside the left molded
channel cord holder.
!
Before you plug the other end
of the telephone cord into the
modular jack on the wall,
charge the battery (refer to
“Charging the Battery Pack,”
page 18).
2) Plug a short telephone cord into the
TEL LINE jack on the base, then place
the telephone cord inside the right
molded channel cord holder.
12
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:13 1999
Color profile: Disabled
Composite Default screen
3) Plug the other end of the cord
into the wall jack. (Remember, the
phone must be fully charged before
you can use it.)
4) Place the base on the two posts of
the wall plate and slide it downward
to secure.
5) Plug the AC adapter into a standard
120 VAC wall outlet that is not
controlled by a wall switch.
6) Raise the antenna on the base.
13
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:15 1999
Color profile: Disabled
Composite Default screen
▼
Direct Wall Mounting
If you don’t have a standard wall plate, you can mount your phone
directly to the wall. Before mounting your cordless telephone, consider
the following:
• Select a location away from electrical cables, pipes, or other items
behind the mounting location. Inserting screws into areas such as this
can be hazardous.
• Try to mount your phone within 10 - 15 feet of a working phone jack in
order to avoid excessive cord length. Remember, you are not mounting
your phone to a wall plate with a built-in phone jack.
• If the selected mounting area has no wooden support beams directly
behind it, you will need the appropriate anchoring devices in order for
the wall to properly support your phone.
1) Insert two mounting screws into
the wall, with their appropriate
anchoring device if necessary,
3-15/16 inches apart. Allow about
3/16 of an inch between the wall
and screw heads for mounting
the phone.
3/16 in.
3 15/16 in.
2) Set the handset retainer. (Refer to “Setting the Handset Retainer for
Wall Mounting” on page 11.)
3) Plug the AC adapter into the DC
input jack on the back of the base
and place the cord inside the left
molded channel cord holder.
14
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:16 1999
Color profile: Disabled
Composite Default screen
4) Plug one end of the long telephone
cord into the TEL LINE jack on the
back of the base and place the
telephone cord into the right molded
channel cord holder.
5) Place the base on the screws and push
it downward to secure.
6) Plug the other end of the telephone
cord into the wall jack.
15
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:17 1999
Color profile: Disabled
Composite Default screen
7) Plug the AC adapter into a standard
120 VAC wall outlet that is not
controlled by a wall switch.
8) Raise the antenna on the base.
16
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:18 1999
Color profile: Disabled
Composite Default screen
INSTALLING THE HANDSET BATTERY PACK
1) Remove the handset battery cover
by pressing in on the cover
release and sliding it downward.
!
2) Plug the battery’s cable into
the handset.
Use only the battery (BT-905)
supplied with your phone.
3) Slide the battery cover on until it
snaps into place.
17
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:18 1999
Color profile: Disabled
Composite Default screen
CHARGING THE BATTERY PACK
▼
Initial battery charging
Before plugging the phone line into your new phone for the first time,
fully charge the rechargeable battery pack for 15-20 hours
without interruption.
1) Place the handset on the base.
2) Make sure that STATUS LED
lights. If the LED doesn’t light,
check to see that the AC adapter is
plugged in and that the handset
makes good contact with the base
charging contacts.
NOTE
Rechargeable batteries have
a “memory effect” that can
reduce standby and talk
time. To avoid this memory
effect, on a monthly basis
use the phone until the low
battery indicator appears.
Then charge the battery for
15-20 hours.
▼
Low battery indicator
When the battery pack is very low and needs to be charged, the phone
is programmed to eliminate functions in order to save power. The
handset beeps. Complete your conversation as quickly as possible and
return the handset to the base for charging.
CLEANING THE BATTERY CONTACTS
To maintain a good charge, clean all charging contacts on the handset
and base about once a month with a pencil eraser or other contact
cleaner. DO NOT use liquids or solvents; you may damage your phone.
18
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:20 1999
Color profile: Disabled
Composite Default screen
SETTING THE PULSE/TONE SWITCH
TIP
Most phone systems use tone
dialing. Check with your
local phone company if
you’re not sure whether your
system is tone or pulse.
Be sure the PULSE/TONE switch
is in the TONE position unless your
local phone system uses pulse dialing.
PU
LS
E-
TO
N
E
ADJUSTING THE RINGER AND VOLUME CONTROLS
▼
Handset Ringer Tone and Volume
Your JRT 2002 lets you choose from
Ring Type B
two ringer tones, Type A and Type B.
High
Each tone has a low and high volume
setting. When the phone is in standby
mode, press the ▲ or ▼ key on the handset to select the handset
ringer tone and volume. As you change the settings, the selection appears
on the LCD.
▼
Handset Earpiece Volume
The JRT 2002 comes with four volume settings for the handset earpiece
- normal, medium, high and loud. The Loud setting is especially useful
in places with a lot of background noise, or for the
hearing impaired.
NOTE
You can only adjust the
volume settings during a call.
Normal, Medium, High
During a call, press ▲ to increase
the earpiece volume, press ▼ to
decrease the earpiece volume. As you
increase or decrease the volume, your selection
appears on the LCD.
<High>
When you hang up, the JRT 2002 keeps the last volume
setting selected.
19
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:21 1999
Color profile: Disabled
Composite Default screen
Loud
During a call, press and hold ▲ for two
seconds. Your selection appears on
the LCD.
<Loud>
The JRT 2002 does not keep the Loud volume setting when you hang
up, but returns to the normal setting to avoid any hearing discomfort
for the next person using the phone.
AUTOMATIC DIGITAL CODE SECURITY
To prevent other parties from making unauthorized calls on your
phone line, a digital code was added to the JRT 2002. Your phone’s
handset and base share this code, which is randomly set each time you
place the handset in the charging cradle.
To reestablish communication between the handset and the base in the
event of a power failure:
1) Restore power to the base.
2) Place the handset on the base and press PAGE.
3) Pick up the handset from the base.
4) Return the handset to the base. The STATUS LED blinks to indicate that
the digital security code is reset.
20
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:22 1999
Color profile: Disabled
Composite Default screen
Using Your New Phone
MAKING AND RECEIVING CALLS
Handset
On Base
Handset
Off Base
Pick up the handset
Press any button (Autotalk)
(AutoTalk) or
or press TALK.
press TALK.
1) Pick up the handset.
1) Press TALK.
2) Press TALK.
2) Listen for the dial tone.
3) Listen for the dial tone. 3) Dial the number.
To make 4) Dial the number.
OR
OR
a call
1) Pick up the handset.
1) Dial the number.
2) Dial the number.
2) Press TALK.
3) Press TALK.
Press TALK, or return the handset to the
To hang up
base (AutoStandby).
1) Pick up the handset.
1) Press TALK.
2) Press TALK.
2) Listen for the dial tone.
3) Listen for the dial tone. 3) Press REDIAL.
4) Press REDIAL.
OR
To redial
OR
1) Press REDIAL.
1) Pick up the handset.
2) Press TALK.
2) Press REDIAL.
3) Press TALK.
USING
YOUR NEW PHONE
To answer
a call
21
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:23 1999
Color profile: Disabled
Composite Default screen
FLASH AND CALL WAITING
If you have “call waiting” service
and a call waiting tone sounds
while you are on a call, press
FLASH to accept the waiting call.
There is a short pause, then you
will hear the new caller. To
return to the original caller,
press FLASH again.
STORING A PHONE NUMBER IN MEMORY
NOTE
Whenever you are using a
menu screen, you must press
a key within 20 seconds or
the phone will return to
standby. You may also press
MEM to exit a memory
menu at any time.
HINT
The character menu consists
of letters, symbols, and
numbers.
NOTE
1) Remove the handset from the base.
2) Press and hold MEM for two seconds.
The following screen appears.
Memory Store
1>
2
3) Use the : and ; keys or number keypad to choose the memory
location where you would like to enter a number.
4) Press SELECT. The following screen appears,
and a cursor flashes indicating that the
display is ready for the name to be entered.
Store Name
❚
5) Use the : and ; keys to scroll through the character menu. Use the
< and > keys to move the cursor to the desired location, and enter the name.
6) If you make a mistake, press DELETE to erase the character you just
entered. Or press and hold DELETE to erase the entire line.
7) Press SELECT. The following screen
appears, and a cursor flashes indicating
that the display is ready for the number.
Store Number
❚
8) Enter the phone number with the handset keypad.
The pause button counts
as one digit. Pressing
PAUSE more than
once increases the length
of pause between numbers.
22
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:25 1999
NOTE
When entering numbers, press PAUSE to enter a
pause in the dialing sequence. The display shows
a P. The pause feature is useful for long distance
calling, credit card dialing, or sequences requiring
a pause between digits.
Color profile: Disabled
Composite Default screen
9) Press SELECT. The handset beeps and
displays a confirmation screen. For
example, if you store a name and number
into memory location number one, the
display shows Memory 1 Stored.
Memory 1 Stored
10)Press MEM or return the handset to the charging cradle to exit store
mode. Or, wait 20 seconds for the phone to return to standby.
EDITING A PHONE NUMBER IN MEMORY
NOTE
Whenever you are using a
menu screen, you must press a
key within 20 seconds or the
phone will return to standby.
You may also press MEM to
exit a memory menu at any
time.
NOTE
Follow these steps to edit a phone number that you have already
programmed into memory.
1) Remove the handset from the base.
2) Press and hold MEM for two seconds.
The display shows the Memory Store
screen and any saved numbers.
Memory Store
1> KAYSIE SCHLITZ
2
CITIZEN
3) Use the : and ; keys or number keypad to select the memory
location you would like to edit. The < and > keys toggle between the
names display and the numbers display.
4) Press SELECT. The following screen appears
with the memory location number that
you have selected in the display
If you select Go Back
at any time, no changes are
made and the handset
shows the Memory
Store screen.
NOTE
> Edit Memory 1
Delete Memory 1
Go Back
You may move the > cursor down to Go Back and
press SELECT if you would like to exit this menu.
5) With > cursor next to Edit Memory,
press SELECT. The following screen
appears, and a cursor flashes indicating
that the display is ready for the name to
be edited.
Store Name
KAYSIE SCHLITZ
6) Use the : and ; keys to scroll through the character menu. Use the
< and > keys to move the cursor to the desired location, and enter the name.
23
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:27 1999
Color profile: Disabled
Composite Default screen
7) Press SELECT. The following screen
appears, and a cursor flashes indicating
that the display is ready for the number
to be edited.
Store Number
4165551212
8) Enter the phone number with the number keypad.
9) Press SELECT. The handset beeps and
displays a confirmation screen. For
example, if you store a name and number
into memory location number one, then
the handset shows Memory 1 Stored.
Memory 1 Stored
10)The display then returns to the Memory Store screen. You may select
another number to edit (return to step 3) or you may press MEM to
return to standby.
ERASING A NUMBER FROM MEMORY
Use these steps to erase a programmed number from memory. Once a
number is erased, that memory location may be programmed with a
new number.
HINT
Use the < and > keys to
toggle between the names
and the numbers displayed
in memory.
NOTE
If you select Go Back
at any time, no changes are
made and the handset shows
the Memory Store screen.
1) Remove the handset from the base.
2) Press and hold MEM for two seconds.
The handset shows the Memory Store
screen with any saved numbers displayed.
Memory Store
1> KAYSIE SCHLITZ
2
CITIZEN
3) Use the : and ; keys or number keypad to select the memory
location you would like to delete. The < and > keys toggle between the
names display and the numbers display.
4) Press SELECT. The following screen
appears with the memory location
number that you have selected in
the display.
5) Use the ; key to move the > cursor
down to the Delete Memory command.
> Edit Memory 1
Delete Memory 1
Go Back
Edit Memory 1
> Delete Memory 1
Go Back
24
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:28 1999
Color profile: Disabled
Composite Default screen
6) Press SELECT. The following confirmation
screen appears.
NOTE
If you select No, no changes
are made and the handset
shows the Memory
Store screen.
Delete Memory?
Yes
> No
7) Use the : key to move the > cursor to the Yes command.
8) Press SELECT. There is a confirmation
tone, and the handset displays Memory
Memory 1 Deleted
1 Deleted.
9) The display then returns to the Memory Store screen. You may select
another number to delete (return to step 3) or you may press MEM to
return to standby.
NOTE
Whenever you are using a
menu screen, you must press a
key within 20 seconds or the
phone will return to standby.
You may also press MEM to
exit a memory menu at
any time.
USING MEMORY DIALING
Follow the steps below to dial a number using a programmed
memory location.
1) Press MEM. The handset displays
your programmed memory locations.
1 > KAYSIE SCHLITZ
2
CITIZEN
3 Grandma
2) Use the : and ; keys or the number
keypad to select the memory location
you would like to dial.
1
KAYSIE SCHLITZ
2 > CITIZEN
3 Grandma
3) Press TALK and the number dials.
NOTE
If you already know the memory location of the
number you wish to dial, press TALK then MEM and
the memory location. The phone will automatically
dial the number.
25
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:30 1999
Color profile: Disabled
Composite Default screen
CHAIN DIALING
On certain occasions after dialing a number, you may be requested to
enter an access code, such as your account number. You can enter this
number into a memory location for later use by doing the following.
1) Store the access code into one of the memory locations (0-9). See
“Storing A Phone Number in Memory” (page 22).
2) Dial the party or service main number.
3) When you need to enter the special number, press MEM followed by
the memory location (0-9).
USING CALLER ID
You must subscribe to Caller ID from your phone company in
order to use this feature.
▼
Setting Up Caller ID Options
There are three Caller ID setup options available; Autotalk, CIDCW, and
Area Code.
AutoTalk allows you to answer the phone without pressing the TALK
button. If the phone rings when Autotalk is on, simply remove the
handset from the cradle and the phone automatically answers the call.
If the phone rings when Autotalk is off, you must press TALK to answer
the call. This option is useful to help you screen your calls
more effectively.
CIDCW (Caller ID on Call Waiting) performs the same as regular Caller
ID on a call waiting number. You must subscribe to CIDCW from your
phone company in order to use this feature.
NOTE
You must subscribe to
CIDCW from your phone
company in order to use
this feature.
If you enter your 3-digit area code number in the Area Code option,
your local area code does not appear in Caller ID messages. When
reviewing Caller ID messages, you will see only the local seven digit
number. For calls received from outside your local area code, you will
see a full 10-digit number.
NOTE
26
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:31 1999
If your calling area requires 10-digit dialing, do
not program this option.
Color profile: Disabled
Composite Default screen
To change your Caller ID options:
HINT
You may use the < and >
keys to toggle between
numbers when programming
the area code.
1) Press and hold CALLER ID for two
seconds. The following screen appears.
1>Auto Talk:Off
2 CIDCW
:On
3 Area Code:
2) Use the : and ; keys to move the cursor to the selection that you
would like to change. Press the SELECT key to toggle between On and
Off for Autotalk and CIDCW. Press SELECT and use the number
keypad to enter or change the area code, then press SELECT again. (You hear
a confirmation tone indicating the area code has been changed.)
3) After you have made your selections, press CALLER ID and return the
handset to the base. The STATUS LED flashes, indicating that your
setup changes are now effective.
NOTE
▼
If you have no New Caller ID
Messages, then the “New”
display is blank. Only the
“Total” display appears.
Screening Your Calls
Caller ID allows you to review caller
information before you answer your
phone. When the phone rings, the
display shows the date, time, name, and
phone number of the caller. If your Caller ID
service is number only, then the name does
not appear on the second line.
NOTE
12/21 12:30PM
Schlitz Kaysie
416-555-1212
If a name or number is not available, the display will show a
message such as Incomplete Data, Private Number,
Private Name, etc.
Once a Caller ID message
has been viewed, it is no
longer considered a
new message.
▼
Using CIDCW (Caller ID on Call Waiting)
1) During a call when you hear the
Caller ID tone, check the handset
for the name and number of the
incoming caller.
2) Press FLASH to accept the incoming call. See page 22 for
additional information.
27
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:32 1999
Color profile: Disabled
Composite Default screen
▼
Your phone stores the most recent 30 numbers in Caller ID memory. If
the memory is full, a new call replaces the oldest number. To review
your Caller ID numbers, follow the steps below.
NOTE
If you have no Caller ID
messages, then the total is
shown as 00.
Reviewing Caller ID Numbers
1) Press CALLER ID, and the Caller ID
New : 01
summary screen appears. The screen
Total
: 02
shows the number of new callers and
the total number of callers stored in
Caller ID memory. (This screen appears on the display whenever the
handset is face up in the base.)
2) Press ; to scan through the list. The
most recent call appears first, with the
date, time, call count, name, and phone
number. Press : to scan back
through the list.
12/21 12:30PM 03
Schlitz Kaysie
416-555-1212
3) Once you have reviewed your oldest
call, the following screen appears.
Press CALLER ID to return to standby.
NOTE
NOTE
Your phone stores the most
recent 30 numbers
in Caller ID memory. If
the memory is full, a
new call replaces the
oldest number.
HINT
For long distance dialing,
press 1 to add a 1 to the
number in the display.
▼
End
Once you have viewed all of your Caller ID
numbers and reached the “End” display, the list
does not cycle back to the beginning. You must
press : to view your previous calls.
Calling a Caller ID Number
1) Press CALLER ID, and the Caller ID
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Select the number that you would like to
dial. Press ; to scan forward and : to
scan back through the list.
New : 01
Total : 02
12/21 12:30PM 03
Schlitz Kaysie
416-555-1212
3) Press TALK and the number automatically dials.
28
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:33 1999
Color profile: Disabled
Composite Default screen
▼
Storing a Caller ID Number Into a Memory Location
1) Press CALLER ID, and the Caller ID
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Press ; or : to find the number that
you would like to store, then press
MEM to store the selection.
NOTE
If you select No, then the
Caller ID screen returns.
3) The select location screen appears. Use
the : and ; keys to select a blank
memory location where you would like to
store the number. (If you want to replace
an existing number with the Caller ID
number, skip to step 5.)
New : 01
Total : 02
12/21 12:30PM 03
Schlitz Kaysie
416-555-1212
Select Location
1> KAYSIE SCHLITZ
2
CITIZEN
4) Press SELECT. A confirmation tone sounds, and the number is
programmed. (Do not complete steps 5 and 6.)
5) If you choose to replace an existing
number with the Caller ID number,
press SELECT, and the following
screen appears.
Replace Memory?
Yes
> No
6) Use the : key to move the cursor to Yes and press SELECT. A
confirmation tone sounds, and the number is programmed.
▼
Deleting a Caller ID Number
To delete a single Caller ID message, follow the steps below.
1) Press CALLER ID, and the Caller ID
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Select the number that you would like to
delete. Press ; to scan forward and : to
scan backwards through the list.
New : 01
Total : 02
12/21 12:30PM 03
Schlitz Kaysie
416-555-1212
29
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:35 1999
Color profile: Disabled
Composite Default screen
3) Press DELETE, and the following
screen appears.
Delete Message?
> Yes
No
4) Press SELECT or DELETE. A confirmation tone sounds and the Caller
ID screen returns with the next message displayed.
5) After you have deleted all Caller ID
number, the display shows End.
Press CALLER ID to return to standby.
▼
End
Deleting All Caller ID Numbers
To delete all of your Caller ID numbers, follow the steps below.
1) Press CALLER ID, and the Caller ID
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Press DELETE, and the following
screen appears.
New : 01
Total : 02
Delete All?
Yes
> No
3) Use the : key to move the cursor to Yes, then press SELECT
or DELETE.
4) A confirmation tone sounds, and the
following screen appears.
5) Press CALLER ID to return to standby.
Total:00
30
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:36 1999
Color profile: Disabled
Composite Default screen
USING REDIAL
REDIAL calls the last number dialed.
The number redialed can be up to 32
digits long.
USING THE TONE FEATURE
If you are dialing in the pulse mode
and need to enter tone digits, press
TONE to enter the digits. Once the call
has ended, the tone mode is canceled
and pulse dialing resumes. The tone
feature applies only when the base
unit is set to pulse.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while
using your phone, you can manually
change the channel for clearer
operation. This function works only
when the phone is in use.
The CHAN button on the handset allows
you to choose between 40 set channels.
During the course of a conversation, if
you hear static or noise which makes it
difficult to hear, press CHAN. The
following screen appears and the phone
changes to a different channel.
Scanning
TRAVELING OUT-OF-RANGE
During a call, as you begin to move too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will
terminate within 20 seconds.
31
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:37 1999
YOUR NEW PHONE
TROUBLESHOOTING
Color profile: Disabled
Composite Default screen
32
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:38 1999
Troubleshooting
QUICK REFERENCE CHART
If your phone is not performing to your expectations, please try these
simple steps.
PROBLEM
SUGGESTION
The charge light won’t come
on when the handset is
placed in the base.
• Make sure the AC adapter is
plugged into the base and
wall outlet.
• Make sure the handset is properly
seated in base.
• Make sure the charging contacts on
the handset and base are clean.
The audio sounds weak
and/or scratchy.
• Make sure that the base antenna is
in a vertical position.
• Press CHAN to help eliminate
background noise.
• Move the handset and/or base to a
different location away from metal
objects or appliances and
try again.
Can’t make or receive calls.
• Check both ends of the base
telephone line cord.
• Make sure the AC adapter is
plugged into the base and
wall outlet.
• Disconnect the AC adapter for a few
minutes, then reconnect it.
• Reset security code (see page 20).
Color profile: Disabled
Composite Default screen
PROBLEM
The handset doesn’t ring or
receive a page.
SUGGESTION
• The Nickel-Cadmium battery pack
may be weak. Charge the battery
on the base unit for 15-20 hours.
• The handset may be too far away
from the base unit.
• Place the base unit away from
appliances or metal objects.
• Reset security code (see page 20).
33
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:38 1999
SPECIFICATIONS
OF YOUR NEW PHONE
Color profile: Disabled
Composite Default screen
34
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:38 1999
G E NER A L
Frequency control:
PLL
Modulation:
DBPSK
Operating temperature: -10º to 50º C (+14º F to +122º F)
BASE
Frequency:
925.997 to 927.947 Mhz (40 channels)
Power requirements:
9 V 210 mA, or 9 V 180 mA
(from AC adapter)
Size:
4-3/8 in. (W) x 2-1/4 in. (D) x 8-1/2 in. (H)
Weight:
Approx. 11.1 oz.
HANDSET
Frequency:
902.052 to 904.002 MHz (40 channels)
Power requirements:
Rechargeable Nickel-Cadmium battery pack
Size (without antenna): 2-1/8 in. (W) x 1-1/2 in. (D) x 7 in. (H)
Weight:
Approx. 8.6 oz. (including battery)
Battery: BT-905
Capacity
600 mAH, 3.6V
Talk mode
7 hours
Standby mode 14 days
Specifications, features, and availability of optional accessories are
all subject to change without prior notice.
Color profile: Disabled
Composite Default screen
35
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:38 1999
Color profile: Disabled
Composite Default screen
CITIZEN ELECTRONICS PORTABLE PRODUCT WARRANTY
We appreciate your purchase of a Citizen Portable Product. We take pride in the quality of our products and have manufactured your new
portable unit to exacting quality standards. We feel confident that in normal use, it will provide you with satisfactory performance.
Citizen Portable Products are warranted against manufacturing defects in materials and workmanship in normal use for the following
periods from the date of purchase by the original retail purchaser or gift recipient in an unused condition. This warranty is conditional
upon the unit being installed and used as directed in the instruction manual.
Product
Remote Controls
Portable Audio
Clock Radio
Cable Converter
Combination Radio/Television (B/W)
Small Screen Television (B/W)
Fans
Headphones
Small Screen Colour Television (Max. 10”)
Breadmakers
Telephones Answering Machines
Telephone/Cordless Telephones
Parts
90 days
1 year
1 year
1 year
1 year
1 year
1 year
90 days
1 year
1 year
1 year
1 year
Labour
90 days
1 year
1 year
1 year
1 year
90 days
1 year
90 days
1 year
1 year
1 year
1 year
Citizen Electronics’ obligation under this warranty shall be limited to the repair, including all necessary parts of the cost of shop labour
connected therewith, or at our option, the exchange of any Portable Product which shows evidence of a manufacturing defect within the
warranty period. Replacement parts, furnished in connection with this warranty shall be warranted for a period equal to the unexpired
portion of the original equipment warrant.
WARRANTY EXCLUSIONS
This warranty is extended to Citizen Portable Products purchased in Canada. This warranty shall not apply to appearance or accessory
items including, but not limited to: antennae, cabinet, cabinet parts, knobs, batteries, dust covers, connecting cables, cassette tapes, and
styli. This warranty shall, in addition, not apply to customer adjustments that are covered in the instruction book; damages due to
handling, transportation, unpacking, set-up, installation, repair or replacement of parts supplied by other than the Citizen Service Centre; or
any malfunction or failure caused by or resulting from abnormal environmental conditions, improper unauthorized service, improper
maintenance, modifictations or repair by the customer, abuse, misuse, neglect, accident, incorrect line voltage, fire, flood, or any Acts
of God.
This Portable Product is only warranted to the original retail purchaser or gift recipient. This warranty becomes void in the event of
commercial or rental use. This warranty becomes void in the event serial numbers are altered, defected
or removed.
Citizen Electronics reserves the right to make changes in design or to make additions to or improvements upon this product, without
incurring any obligation to install the same on products previously manufactured.
The foregoing is in lieu of all other warranties expressed or implied and Citizen Electronics neither assumes nor authorizes any person to
assume for it any other obligation or liability in connection with the sales or service of this product. In no event shall Citizen Electronics or
its Jutan dealers be liable for special or consequential damage arising from the use of this product, or for any delay in the performance of
this warranty due to cause beyond our control.
The purchaser may have the rights under existing provincial or federal laws, and where any items of this warranty are prohibited by such
laws, they are deemed null and void, but the remainder of the warranty shall remain in effect. Warranty service is only available
in Canada.
CUSTOMER OBLIGATIONS
The dealer’s original, dated bill-of-sale should be retained as proof of purchase date and must be presented, together with this warranty
card, to the Citizen Service Centre in Canada, when this product is to be serviced under the provisions of this warranty. Transportation to
and from the service centre is the responsibility of the owner.
HOW TO OBTAIN WARRANTY SERVICE
Should this product require warranty service, bring or mail it prepaid and insured along with the dealer’s original dated bill-of-sale to the
closest Citizen Service Centre.
OUT OF WARRANTY SERVICE
TORONTO
455 Gordon Baker Road
Ontario, M2H 4H2
(416) 499-5449 / 499-5450
Should this product require service after the warranty period has expired, bring or mail it prepaid and insured to the nearest Citizen Service
Centre. Please include a money order for $8.95 to cover the cost of insurance and return of the product. Repair charges will be in addition
to this amount.
36
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:39 1999
Color profile: Disabled
Composite Default screen
I.C. NOTICE
Notice: The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment Technical Requirements
document(s). The Department does not guarantee the equipment will operate to the
user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the users of this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.”
Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
37
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:40 1999
Color profile: Disabled
Composite Default screen
PRECAUTIONS!
Before you read anything else, please observe the following:
Warning!
The manufacturer DOES NOT represent this unit to be waterproof. To reduce the risk of fire,
electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
Rechargeable Nickel-Cadmium Battery Warning
• This equipment contains a rechargeable nickel-cadmium battery.
• The rechargeable nickel-cadmium battery contained in this equipment may explode if disposed of in
a fire.
• Do not short-circuit the battery.
• Do not charge the rechargeable nickel-cadmium battery used in this equipment in any charger other
than the one designed to charge this battery as specified in the owner’s manual. Using another
charger may damage the battery or cause the battery to explode.
RECHARGEABLE NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR
DISPOSED OF PROPERLY
Covered under one or more of the following U.S. patents:
4,511,761
5,426,690
5,650,790
5,717,312
4,523,058
5,434,905
5,660,269
5,754,407
4,595,795
5,491,745
5,661,780
5,768,345
4,797,916
5,533,010
5,663,981
5,787,356
5,381,460
5,574,727
5,671,248
5,838,721
©1999 Citizen is a registered trademark of Citizen Electronics Toronto, Canada M2H 4H2
All rights reserved.
Printed in the Philippines
P:\Citizen\JRT2002\JRT2002 OM.vp
Thu May 27 15:05:40 1999
CONTROLS
AND FUNCTIONS
Color profile: Disabled
Composite Default screen
P:...JRT2002 OMfoldout.vp
Thu May 27 15:33:26 1999
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising