Uniden | ACS2SGLS | Quick Reference | Uniden ACS2SGLS Quick Reference

Uniden ACS2SGLS Quick Reference
AppCam Solo 2 Solar Panel
Quick Start Guide
What’s in the Box
Mount the Solar Panel
1. Mount the bracket with the mounting
template and the screws provided in
the package.
Solar Panel
x1
Screw Mount
x1
Screw Kit
x2
Mounting Template
x2
Positioning the Solar Panel
2. Slot the solar panel into the bracket
and make sure it’s secure.
Please select a position with the
most sunlight throughout the
year for your solar panel. The
solar panel needs direct sunlight
to sufficiently power your
camera daily. The amount of
energy that the solar panel can
produce is affected by weather
conditions, seasonal changes,
geographic locations, etc.
3. Loosen the adjusting control on the
bracket and adjust the angle of the
solar panel to make it receive direct
sunlight, and then fasten the adjusting
control to secure your setting.
2
The Ideal Angle = The Local Latitudes + 5°
3
WARRANTY
Uniden AppCam Solo 2 Solar Panel
Connect to AppCam Solo 2
Connect the solar panel to the App Cam Solo 2
camera with the micro USB cable.
Important Notes:
1. Make sure that there is NO blocking on the
solar panel. The energy harvesting efficiency
drops drastically even when a small portion of
the solar panel is blocked.
2. Please don’t install the solar panel completely
horizontally. Otherwise your solar panel might
accumulate dust and other debris easily.
It’s advised to install the solar panel angularly
to make it receive direct sunlight.
3. Wipe the solar panel regularly to remove the
dust or debris.
!
4
The Waterproof
Wire Cover
Make sure the camera is plugged
in all the way and that the
waterproof wire cover protects
the interface between the camera
and the solar panel.
Uniden Corporation Limited 1 Year Warranty
I mportant: Keep your receipt. Proof of original purchase is
required for warranty service
WARRANTOR: Uniden America Corporation (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year,
to the original retail owner, this Uniden Product to be
free from defects in materials & craftsmanship with only
the limitations or exclusions set out below. Uniden only
warrants the Products contained in the original factory
packaging.
WARRANTY DURATION: This warranty to the original user
shall terminate & be of no further effect 12 months after
the date of original retail sale. The warranty is invalid if the
Product is (A) damaged or not maintained as reasonable
or necessary, (B) modified, altered, or used as part of any
conversion kits, sub-assemblies, or any configurations
not sold by Uniden, (C) improperly installed, (D) serviced
or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this
warranty, (E) used in any conjunction with equipment or
parts or as part of any system not manufactured by Uniden,
or (F) installed or programmed by anyone other than as
detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product
does not conform to this warranty at any time while
this warranty is in effect, warrantor will either, at its
option, repair or replace the defective unit & return it to
you without charge for parts, service, or any other cost
(except shipping & handling) incurred by warrantor or its
representatives in connection with the performance of this
warranty. Warrantor, at its option, may replace the unit
with a new or refurbished unit. Warrantor is not responsible
for any additional costs associated with reinstallation of
product.
5
WARRANTY cont’d
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE &
ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND THE
CONTENTS CONTAINED IN THE ORIGINAL FACTORY PACKAGING
& IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF
ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED
OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY
DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES TO
THE PRODUCT CAUSED BY IMPROPER INSTALLATION OF THE
PRODUCT. THIS WARRANTY DOES NOT COVER ANY COSTS
RELATING TO THE REMOVAL, REPLACEMENT, OR INSTALLATION
OF ANY PRODUCT.
Some states do not allow this exclusion or limitation
of incidental or consequential damages so the above
limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal
rights, & you may also have other rights which vary from
state to state. This warranty is void outside the United
States of America & Canada.
6
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:
If, after following the instructions in the owner’s manual
you are certain that the Product is defective, pack the
Product carefully (preferably in its original packaging).
The Product should include all parts & accessories
originally packaged with the Product. Include evidence of
original purchase & a note describing the defect that has
caused you to return it.
The Product should be shipped freight prepaid, by
traceable means, to warrantor at:
Uniden America Service
C/O Saddle Creek
743 Henrietta Creek Rd., Suite 100
Roanoke, Texas 76262
uniden.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising