Bush Hog | Single-Spindle Rotary Cutter | Parts Manual | Bush Hog Single-Spindle Rotary Cutter BH300 Series Rotary Cutter Parts Manual

Bush Hog Single-Spindle Rotary Cutter BH300 Series Rotary Cutter Parts Manual
BH300 SERIES
ROTARY CUTTER
MODELS
BH315, BH316, BH317
Published
Revised
11/19
PARTS MANUAL
SECTION 122
An Operator’s Manual was shipped with the
equipment. The Operator’s Manual is an integral
part of the safe operation of this machine and
must be maintained with the unit at all times.
READ, UNDERSTAND, and FOLLOW the
Safety and Operation Instructions contained in
this manual before operating the equipment. If
the Operator’s Manual is not with the equipment,
contact your dealer or Bush Hog to obtain a copy
before operating the equipment.
Important
Operating
and Safety Instructions
are found in the Mower
Safety Video that can
be instantly accessed
on the internet at:
www.algqr.com/bve
©2019 Alamo Group Inc.
To the Owner/Operator/Dealer
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded
operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has
designed this implement to be used with all its safety equipment properly attached to minimize the chance of
accidents.
BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rules
of safety and common sense!
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty RegistrationForm in
full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on theWarranty Card and
on the Warranty Form that you retain.
Bush Hog Land Maintenance Parts
TABLE OF CONTENTS
BH200 SERIES ROTARY CUTTERS
BH315, BH316, BH317
DESCRIPTION .............................................................................PAGE NUMBER
Front Belting and Rear Band, (ALL MODELS) ............................................122-1-1
Front Chains and Rear Chains, Single Row (ALL MODELS) .......122-1-2, 122-1-3
Front Chains and Rear Chains, Double Row (ALL MODELS) ......122-1-4, 122.1-5
BH315 Base Frame Assembly ......................................................122-1-6, 122-1-7
BH316 Base Frame Assembly ......................................................122-1-8, 122-1-9
BH317 Base Frame Assembly .................................................................122-1-10,
Gearbox Assembly BH315 ..........................................................................122-2-1
Gearbox Assembly BH316 ..........................................................................122-2-2
Gearbox Assembly BH317 ..........................................................................122-2-3
Driveline Assembly BH315 .........................................................................122-3-1
Driveline Assembly BH316 ..........................................................................122-3-2
Driveline Assembly BH317 ..........................................................................122-3-3
Hitch Assembly, (ALL MODELS) .................................................................122-4-1
Single Tailwheel and Related Parts, (ALL MODELS)..................................122-5-1
Dual Tailwheel and Related Parts BH317 ...................................................122-5-2
Bush Hog Land Maintenance Parts
FRONT BELTING and REAR BAND
All Models BH315, BH316, BH317
r
tyu
u yt
e
r
q
REF.
NO.
PART
NO.
1
50071065
50070871
50070974
50080398
50080399
50070973
50070300
50070318
50070342
44109BH
15915BH
15812
8151200
2
3
4
5
6
7
w
DESCRIPTION
Angle for BH315 - 5’ Models
Angle for BH316 - 6’ Models
Angle for BH317 - 7’ Models
Belting BH315 - 5’ Models
Belting BH316 - 6’ Models
Belting BH317 - 7’ Models
Rear Band BH315
Rear Band BH316
Rear Band BH317
Carriage Bolt 3/8” x 1” G5 ZP
Flatwasher, 3/8” ZP
Lockwasher, 3/8”
Hex Nut, 3/8” CP
QTY.
REQ’D.
1
1
1
1
1
1
1
1
1
*
*
*
*
* As Required
122-1-1
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
FRONT CHAINS and REAR CHAINS
SINGLE ROW
All Models BH315, BH316, BH317
o
1)
i
y
1!
1$ 1# 1@
1@ 1# 1$
uiy
t
1!
r
e
wq
122-1-2
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
FRONT CHAINS and REAR CHAINS
SINGLE ROW
All Models BH315, BH316, BH317
REF.
NO.
PART
NO.
1
50074799SP
50074796SP
50073880SP
50017211
————
50070149
50070049
50070112
50070145
50070045
50070107
50018912
————
50073402
50073357
50074289
50070146
50070046
50070109
————
44109BH
15915BH
15812
8151200
2
3
4
5
6
7
8
9
10
11
12
13
14
DESCRIPTION
Front Chain Assy. BH315
Front Chain Assy. BH316
Front Chain Assy. BH317
Chain, 6 Link
Chain Bracket, Front
Retainer Rod, Front BH315
Retainer Rod, Front BH316
Retainer Rod, Front BH317
Rear Chain Assy. LH, BH315
Rear Chain Assy. LH, BH316
Rear Chain Assy. LH, BH317
Chain, 4 Link
Rear Chain Bracket, LH
Retainer Rod, Rear, BH315
Retainer Rod, Rear, BH316
Retainer Rod, Rear, BH317
Rear Chain Assy. RH, BH315
Rear Chain Assy. RH, BH316
Rear Chain Assy. RH, BH317
Rear Chain Bracket, RH
Carriage Bolt, 3/8”x 1” Gr.5
Flatwasher, 3/8”
Lockwasher, 3/8”
Hex Nut, 3/8”
QTY.
REQ’D.
1
1
1
*
1
1
1
1
1
1
1
*
1
2
2
2
1
1
1
1
*
*
*
*
*As Required
122-1-3
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
FRONT CHAINS and REAR CHAINS
DOUBLE ROW
All Models BH315, BH316, BH317
o
1)
i
y
1!
1$ 1# 1@
1@ 1# 1$
uiy
t
1!
r
e
wq
122-1-4
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
FRONT CHAINS and REAR CHAINS
DOUBLE ROW
All Models BH315, BH316, BH317
REF.
NO.
PART
NO.
1
50070302
50070320
50070344
50017213
————
50070149
50070049
50070112
50070303
50070321
50070345
50017212
————
50070142
50070036
50074289
50070304
50070322
50070346
————
44109BH
15915BH
15812
8151200
2
3
4
5
6
7
8
9
10
11
12
13
14
DESCRIPTION
Front Chain Assy. BH315
Front Chain Assy. BH316
Front Chain Assy. BH317
Chain, 11 Link
Chain Bracket, Front
Retainer Rod, Front BH315
Retainer Rod, Front BH316
Retainer Rod, Front BH317
Rear Chain Assy. LH, BH315
Rear Chain Assy. LH, BH316
Rear Chain Assy. LH, BH317
Chain, 47Link
Rear Chain Bracket, LH
Retainer Rod, Rear, BH315
Retainer Rod, Rear, BH316
Retainer Rod, Rear, BH317
Rear Chain Assy. RH, BH315
Rear Chain Assy. RH, BH316
Rear Chain Assy. RH, BH317
Rear Chain Bracket, RH
Carriage Bolt, 3/8”x 1” Gr.5
Flatwasher, 3/8”
Lockwasher, 3/8”
Hex Nut, 3/8”
QTY.
REQ’D.
1
1
1
*
1
1
1
1
1
1
1
*
1
2
2
2
1
1
1
1
*
*
*
*
*As Required
*As Required
122-1-5
©2019 Alamo Group Inc.
November, 2019
Bush Hog Land Maintenance Parts
BASE FRAME ASSEMBLY
MODEL BH315 ROTARY CUTTER
w
e
3)
r
4)t
y
1#
2@
1^
1(
2%
2@
1@
2(
2*
2!
2& 3!
3@ 1&
3#
u
q
2$ 2#
2)
2^
3$
1!
1)
1*
3%
3(
3*
3&
3^
i
1%
1$
o
122-1-6
©2019 Alamo Group Inc.
November, 2019
Bush Hog Land Maintenance Parts
BASE FRAME ASSEMBLY
MODEL BH315 ROTARY CUTTER
REF.
NO.
PART
NO.
1
————————00791060BH
81592
20299
44216
90560
50072529
63607
7919BH
20322
252BH
7555BH
50035829
00791093
00791085
2850005
50080166
50080370
50074259
50070832
D813
D454
D614
D590
D551
D559
D549
D547
D546
50031214
50080249
91061
91062
1162424
50040387
50081172
3161212
15915BH
15812
8151200
44311BH
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
DESCRIPTION
Deck Weldment, BH Red (50080188-10)
Deck Weldment, JD Green (50080188-16)
Deck Weldment, Kub Orange (50080188-23)
Deck Weldment, NH Blue (50080188-28)
Gearbox Assembly
Input Shield
Locknut, 3/4” ZP
Flatwasher, M8 ZP
HHCS, M8 x 1.25 x 15 G8.8 w/Patch
Pan Weldment
Blade Bolt Kit
Blade Bolt
Lockwasher, 1-1/8” CP
Jamnut” 1-1/8” NF
Blade, 5’ Uplift
Owners Manual Tube
Castle Nut, M30 - 2
Shield, Protective
Klik Pin, 7/16” x 1-3/4”
Hitch Pin, 7/8” x 7”
Decal, BH - Reflect
Decal, Made in USA
Decal Kit (items 20-29)
Decal, Danger Multilingual
Decal, Warning Crush Hazard
Decal, Danger Thrown Objects
Decal, Lube
Decal, Blade Rotation CCW
Decal, Genuine BH Parts
Decal, Danger, Operation
Decal, Danger
Decal, Danger Guard Missing
Red Reflector
Decal, Model, BH315
Spacer
Spacer, Cat 2 Std
HHCS, 3/4” x 2-1/2” G5 ZP
Removable Front Skid
Removable Skid
#3 HD Plow BLT 3/8” x 1-1/4” G5
Flatwasher 3/8” ZP
Lockwasher 3/8” ZP
Hex Nut 3/8” CP
Lockwasher, M8 ZP
QTY.
REQ’D.
1
1
1
1
1
1
6
4
4
1
2
2
2
2
2
1
1
1
2
2
2
1
1
1
1
2
1
1
1
1
1
1
2
1
2
2
6
2
2
12
12
12
12
4
122-1-7
©2019 Alamo Group Inc.
November, 2019
Bush Hog Land Maintenance Parts
BASE FRAME ASSEMBLY
MODEL BH316 ROTARY CUTTER
w
e
3)
r
4)t
y
1#
2@
1^
1(
2%
2@
1@
2(
2*
2!
2& 3!
3@ 1&
3#
u
2^
3$
q
2$ 2#
2)
1!
1)
1*
3%
3(
3*
3&
3^
i
1%
1$
o
122-1-8
©2019 Alamo Group Inc.
November,2019
Bush Hog Land Maintenance Parts
BASE FRAME ASSEMBLY
MODEL BH316 ROTARY CUTTER
REF.
NO.
PART
NO.
1
————————00791059BH
81592
20299
44216
90560
50072533
63607
7919BH
20322
252BH
7556BH
50035829
00791093
00791085
2850005
50080166
50080370
50074259
50070832
D813
D454
D614
D590
D551
D559
D549
D547
D546
50031214
50080249
91061
91062
1162424
50040387
50040390
3161212
15915BH
15812
8151200
44311BH
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
DESCRIPTION
Deck Weldment, BH Red (50080204-10)
Deck Weldment, JD Green (50080204-16)
Deck Weldment, Kub Orange (50080204-23)
Deck Weldment, NH Blue (50080204-28)
Gearbox Assembly
Input Shield
Locknut, 3/4” ZP
Flatwasher, M8 ZP
HHCS, M8 x 1.25 x 15 G8.8 w/Patch
Pan Weldment
Blade Bolt Kit
Blade Bolt
Lockwasher, 1-1/8” CP
Jamnut, 1-1/8” NF
Blade, 5’ Uplift
Owners Manual Tube
Castle Nut M30 - 2
Shield, Protective
Klik Pin, 7/16” x 1-3/4”
Hitch Pin, 7/8” x 7”
Decal, BH - Reflect
Decal, Made in USA
Decal Kit (items 20-29)
Decal, Danger Multilingual
Decal, Warning Crush Hazard
Decal, Danger Thrown Objects
Decal, Lube
Decal, Blade Rotation CCW
Decal, Genuine BH Parts
Decal, Danger, Operation
Decal, Danger
Decal, Danger Guard Missing
Red Reflector
Decal, Model, BH316
Spacer
Spacer, Cat 2 Std
HHCS, 3/4” x 2-1/2” G5 ZP
Removable Front Skid
Removable Skid
#3 HD Plow BLT 3/8” x 1-1/4” G5
Flatwasher 3/8” ZP
Lockwasher 3/8” CP
Hex Nut 3/8” CP
Lockwasher, M8 ZP
QTY.
REQ’D.
1
1
1
1
1
1
6
4
4
1
2
2
2
2
2
1
1
1
2
2
2
1
1
1
1
2
1
1
1
1
1
1
2
1
2
2
6
2
2
14
14
14
14
4
122-1-9
©2019 Alamo Group Inc.
November, 2019
Bush Hog Land Maintenance Parts
BASE FRAME ASSEMBLY
MODEL BH317 ROTARY CUTTER
w
e
3)
r
4)t
y
1#
2@
1^
1(
2%
2@
1@
2(
2*
2!
2& 3!
3@ 1&
3#
u
2^
3$
q
2$ 2#
2)
1!
1)
1*
3%
3(
3*
3&
3^
i
1%
1$
o
122-1-10
©2019 Alamo Group Inc.
November, 2019
Bush Hog Land Maintenance Parts
BASE FRAME ASSEMBLY
MODEL BH317 ROTARY CUTTER
REF.
NO.
PART
NO.
1
————————00791059BH
81592
20299
44216
90560
50072531
63607
7919BH
20322
252BH
7557BH
50035829
00791093
00791085
2850005
50080167
50080370
50074259
50070832
D813
D454
D614
D590
D551
D559
D549
D547
D546
50031214
50080251
50081249
50081248
1162424
50040387
50040390
3161212
15915BH
15812
8151200
44311BH
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
DESCRIPTION
Deck Weldment, BH Red (50080223-10)
Deck Weldment, JD Green (50080223-16)
Deck Weldment, Kub Orange (50080223-23)
Deck Weldment, NH Blue (50080204-28)
Gearbox Assembly
Input Shield
Locknut, 3/4” ZP
Flatwasher, M8 ZP
HHCS M8 x 1.25 x 15 G8.8 w/Patch
Pan Weldment
Blade Bolt Kit
Blade Bolt
Lockwasher, 1-1/8” CP
Jamnut, 1-1/8” NF
Blade, 5’ Uplift
Owners Manual Tube
Castle Nut, M30 - 2
Shield, Protective
Klik Pin, 7/16” x 1-3/4”
Hitch Pin, 7/8” x 7”
Decal, BH - Reflect
Decal, Made in USA
Decal Kit, (items 20-29)
Decal, Danger Multilingual
Decal, Warning Crush Hazard
Decal, Danger Thrown Objects
Decal, Lube
Decal, Blade Rotation CCW
Decal, Genuine BH Parts
Decal, Danger, Operation
Decal, Danger
Decal, Danger Guard Missing
Red Reflector
Decal, Model, BH317
Spacer Bushing, (1.145” x 2” x 2.69L)
Cat III Bushing, (1.145” x 1.4375” x 2.88L)
HHCS, 3/4” x 2-1/2” G5 ZP
Removable Front Skid
Removable Skid
#3 HD Plow BLT 3/8” x 1-1/4” G5
Flatwasher 3/8” ZP
Lockwasher 3/8” CP
Hex Nut 3/8” CP
Lockwasher, M8 ZP
QTY.
REQ’D.
1
1
1
1
1
1
6
4
4
1
2
2
2
2
2
1
1
1
2
2
2
1
1
1
1
2
1
1
1
1
1
1
2
1
2
2
6
2
2
14
14
14
14
4
122-1-11
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
GEARBOX ASSEMBLY
540 RPM
MODEL BH315
REF.
NO.
PART
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
00791060BH
——
00791063
00791064
50068116
50074092
44390BH
00791032
00791065
00755621
00791066
00791067
0070796
00791081
00755618
70800
00791083
2516460
00755632
70499
00791085
00791084
00790983
00790985
4038611
2716423
00791093
DESCRIPTION
QTY.
Gearbox Assembly
Housing
Cap, Top
Shaft, Input
Seal, Oil M45 x 85 x 10
Sight Glass 85mm
Capscrew, M10-1.5 x 20 Gr8.8
Plug, Socket Head
Shaft, Output
Nut, Castle M30-1.5
Kit, Shim for Input Shaft
Kit, Shim for Output Shaft
Bearing, Roller M45 x 85 x 20.75
Kit, Gear (24 and 14 T Gears)
Ring, Snap M85 x 88.5 x 3
Bearing, Roller M50 x 90 x 21.75
Ring, Snap M90 x 93.5 x 3
Ring, Snap M50 x 47 x 3
Shim, M45.3 x 65.3 x 2.5
Pin, Cotter M5 x 63
Shield, Protective
Seal, Oil Dbl. Lip M60 x 90 x 10
Sealing Washer
Plug, Vent M16 -1.5
Dipstick, Oil
Pin, Cotter M6 x 60
Nut, Castle M30-2
1
1
1
1
1
1
4
1
1
1
2
1
2
1
2
2
2
1
1
1
1
1
1
1
1
1
1
122-2-1
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
GEARBOX ASSEMBLY
540 RPM
MODEL BH316
REF.
NO.
PART
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
00791059BH
——00791063
00791064
50068116
50074092
44390BH
00791032
00791065
00755621
00791066
00791067
00791080
70796
00755618
70800
00791083
2516460
00755632
70499
00791085
00791084
00790983
00790985
4038611
2716423
00791093
DESCRIPTION
QTY.
Gearbox Assembly
Housing
Cap, Top
Shaft, Input
Seal, Oil M45 x 85 x 10
Sight Glass 85mm
Capscrew M10-1.5 x 20 Gr8.8
Plug, Socket Head "
Shaft, Output
Nut, Castle M30-1.5"
Kit, Shim for Input Shaft
Kit, Shim for Output Shaft
Kit, Gear (19 and 13 Tooth Gears)
Bearing , Roller 50 x 90 x 21.75
Ring, Snap M85 x 88.5 x 3
Bearing, Roller M50 x 90 x 21.75
Ring, Snap M90 x 93.5 x 3
Ring, Snap M50 x 47 x 3"
Shim M45.3 x 65.3 x 2.5
Pin Cotter M5 x 63
Shield, Protective"
Seal, Oil Dbl. Lip M60 x 90 x 10
Sealing Washer
Plug, Vent M16 -1.5
Dipstick, Oil
Pin, Cotter M6 x 60
Nut, Castle M30-2
1
1
1
1
1
1
4
1
1
1
2
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
122-2-2
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
GEARBOX ASSEMBLY
540 RPM
MODEL BH317
17T
14T
REF.
NO.
PART
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
00791057BH
————
00791063
00791064
50068116
50074092
44390BH
00791032
00791065
00755621
00791066
00791067
00791079
70796
00755618
70800
00791083
2516460
00755632
70499
00791085
00791084
00790983
00790985
4038611
2716423
00791093
DESCRIPTION
QTY.
Gearbox Assembly
Housing,EZ80 Gearbox
Cap, EZ80 Gearbox
Shaft, Input EZ80 Gearbox
Seal, Oil 45x85x10
Sight Window 85mm
Capscrew, M10-1.5x20Gr.8.8
Plug, Hex Socket Hd M6
Shaft, Output EZ80 Gearbox
Nut, Castle M30x1.5
Shim Kit, Input EZ80
Shim Kit, Output EZ80
Gear Kit, (14T & 17T Gears)
Bearing, Ball (45x85x20.75)
Snap Ring (85x88.5x3)
Bearing, Roller (50x90x21.75)
Snap Ring (90x93.5x3)
Snap Ring (50x47x3)
Shim (45.3x65.3x2.5)
Cotter Pin M5X63
Shield, Protective
Seal, Oil (60x90x10)
Washer, Seal M16
Plug, Vent M16-1.5
Dipstick
Cotter Pin M6x60
Nut, Castle M30-2.5
1
1
1
1
1
1
4
1
1
1
2
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
122-2-3
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
DRIVELINE ASSEMBLY
540 RPM
MODEL BH315
3
18 9
8
10
11
12
14
13
12
15
16
17
2
1
21
20
2
19
4
6
22
5
5
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Part
No.
50053135
76801
64610
50050544
50053169
50050289
50053240
50053253
50017480
76080
76081
76082
76083
76247
76309
76085
76086
44155BH
44154BH
————78786
78608
7
Description
Qty.
Req’d.
Driveline Assy
1
Complete Collar Yoke
1
Cross Journal Set
2
Complete Disc Clutch F29
1
Guard Retaining Collar, Outer
1
Bolt
6
Guard Retaining Collar, Inner
1
Complete Shield
1
Ball Collar Kit 1-3/8”
1
Spring
8
Flanged Yoke
1
Bushing
1
Lining Ring
2
Tapered Pin Set 1-3/4”
1
Clutch Support F29
1
Inner Plate
1
Pressure Plate
1
Capscrew M10 X 1.5 X 85
8
Lock Nut M10 X 1.5
8
Half Female Shaft W/ Shield
1
Half Male Shaft W/ Shield
1
Danger Decal, Outer Tube
1
Danger Decal, Outer Shield
1
122-3-1
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
DRIVELINE ASSEMBLY
540 RPM
MODEL BH316
3
18 9
8
10
11
12
14
13
12
16
15
17
2
1
21
20
2
19
4
6
22
5
5
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART
NO.
50053133SP
76801
64610
50050544
50053169
50056404
50053240
50053249
50017480
76080
76081
76082
76083
76247
76309
76085
76086
44155BH
44154BH
————78786
78608
7
DESCRIPTION
Driveline Assembly
Complete Collar Yoke
Cross Journal Set
Complete Disc Clutch F29
Guard Retaining Collar, Outer
Bolt
Guard Retaining Collar, Inner
Complete Shield
Ball Collar Kit 1-3/8”
Spring
Flanged Yoke
Bushing
Lining Ring
Tapered Pin Set 1-3/4”
Clutch Support F29
Inner Plate
Pressure Plate
Capscrew, M10 x 1.5 x 85
LockNut, M10 x 1.5
Half Female Shaft w/ Shield
Half Male Shaft w/ Shield
Danger Decal, Outer Tube
Danger Decal, Outer Shield
QTY.
1
1
2
1
1
6
1
1
1
8
1
1
2
1
1
1
1
8
8
1
1
1
1
122-3-2
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
DRIVELINE ASSEMBLY
540 RPM
MODEL BH317
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
76994
76802
64663
63956
66865
66866
67006
66868
66869
66870
76456
76057
87992
76059
76150
Description
Driveline Assy
Ball Collar Yoke
Cross Journal Set
Grease Nipple
Outer Yoke
Roll Pin For Outer Tube
Outer Tube
Inner Tube
Roll Pin For Inner Tube
Inner Yoke
Complete Disc Clutch F49
Guard Retaining Collar, Outer
Bolt
Guard Retaining Collar, Inner
Complete Shield
Qty.
Req’d.
Ref.
No.
Part
No.
1
1
2
2
1
1
1
1
1
1
1
1
6
1
1
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
50017480
76080
76164
76082
76083
76247
76458
76085
76197
76086
44159BH
44154BH
————78786
78608
Description
Qty.
Req’d.
Ball Collar Kit 1-3/8”
Spring
Flanged Yoke
Bushing
Lining Ring
Tapered Pin Set 1-3/4”
Clutch Support F49
Inner Plate
Intermediate Plate
Pressure Plate
Capscrew, M10 x 1.5 x 100
Lock Nut, M10 x 1.5
Half Female Shaft W/ Shield
Half Male Shaft W/ Shield
Danger Decal, Outer Tube
Danger Decal, Outer Shield"
1
8
1
1
4
1
1
2
1
1
8
8
1
1
1
1
122-3-3
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
HITCH ASSEMBLY
All Models BH315, BH316 & BH317
o
1!
1)
1%
1&
1(
e
r
i
tu
y1*
1$
i
1^
1#
1*y
ut
1@
q
y
r
1(
1) i
y t
w
REF.
NO.
PART
NO.
1
2
3
4
5
6
7
8
9
10
11
12
20294
50080067
20510
50050393
15598BH
20748
50050555
20638
19037
50050392
50033665
50080066
50080104
50080149
50080063
50080065
50080103
50080148
50080062
50080060
50080226
50080059
50080225
19053
50080366
13
14
15
16
17
18
19
DESCRIPTION
HHCS, 5/8” x6-1/2” G5 ZP
Bushing, .88 “x .67” x 5.3” OL
HHCS, 3/4” x 2-1/4” G5 ZP
Wear Bushing
Locknut, 5/8” CP
Flatwasher, 5/8” SAE ZP
Strut Weldment Bushing
Locknut, 3/4” CP
HHCS, 3/4” x 5-1/2” G5 ZP
Spacer Bushing
Cat 1 QH Top Bushing
RH Strut, BH315
RH Strut, BH316
RH Strut, BH317
Toggle, RH
LH Strut, BH315
LH Strut, BH316
LH Strut, BH317
Toggle, LH
RH Riser Strut, BH315/BH316
RH Riser Strut, BH317
LH Riser Strut, BH315/BH316
LH Riser Strut, BH317
HHCS, 5/8” x 2-1/4” G5 ZP
Bushing
QTY.
1
1
4
1
3
4
2
5
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
122-4-1
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
SINGLE TAILWHEEL and RELATED PARTS
All Models BH315, BH316, & BH317
20
19
19
18
17
15
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
NO.
50069838
500BH
50068522
44269
44204BH
50067488
120BH
50068521
50068525
50068523
50068520
50068524
44824BH
20167
449BH
50069839
50080190
50080203
50080146
44625
20748
15598BH
DESCRIPTION
Tailwheel Assy.
Solid Tire Assy.
Hub Casting
Flatwasher, M12
Capscrew, M12 x 1.75 x 25 Gr8.8
Axle Bolt ,3/4” -16 Thread
Slotted Nut, 3/4”- 16 Thread
Bearing Assy.
Seal
Bushing
Cap, Protective
Washer
Roll Pin, 1/2” x 2-1/2”
Cotter Pin, 3/16” x 2”
Grease Fitting
Fork Assy.
Tailwheel Tube Weld. for BH315
Tailwheel Tube Weld. for BH316
Tailwheel Tube Weld. For BH317
Capscrew, 5/8” x 4-3/4” Gr.5
Flatwasher, 5/8”
Locknut 5/8”
QTY.
1
1
1
4
4
2
1
2
2
2
2
2
1
1
2
1
1
1
1
1
2
1
122-5-1
©2019 Alamo Group Inc.
Bush Hog Land Maintenance Parts
DUAL TAILWHEEL and RELATED PARTS
MODEL BH317
20
19
19
18
1%
1&
1%
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART
NO.
50069838
500BH
50068522
44269
44204BH
50067488
120BH
50068521
50068525
50068523
50068520
50068524
44824BH
20167
449BH
50069839
50080396
44625
20748
15598BH
DESCRIPTION
QTY.
Tailwheel Assy.
Solid Tire Assy.
Hub Casting
Flatwasher, M12
Capscrew, M12 x 1.75 x 25 Gr8.8
Axle Bolt, 3/4” -16 Thread
Slotted Nut, 3/4”- 16 Thread
Bearing Assy.
Seal
Bushing
Cap, Protective
Washer
Roll Pin,1/2” x 2-1/2”
Cotter Pin, 3/16” x 2”
Grease Fitting
Fork Assy.
Tailwheel Tube Weld. for BH317
Capscrew, 5/8” x 4-3/4” Gr.5
Flatwasher, 5/8
Locknut, 5/8”
2
2
2
8
8
4
2
4
4
4
4
4
2
2
4
2
1
1
2
1
122-5-2
©2019 Alamo Group Inc.
• SELMA, AL 3670
WWW.BUSHHOG.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising