Bush Hog | Crop Flail | Spec sheet | Bush Hog Crop Flail BRC Flail Crop Shredder Spec Sheet

Bush Hog Crop Flail BRC Flail Crop Shredder Spec Sheet
Performance
You Can
Count
On™
CROP FLAIL SHREDDERS
BRC SERIES | BRC115, BRC118, BRC120, BRC125
BRC Series
CROP FLAIL SHREDDER
The Bush Hog® line of BRC row crop flails provides superior shredding performance in a
number of crop conditions, cotton, BT corn stalks, milo, rice, wheat, and vegetable stubble
are no match for these machines. Designed to handle higher volumes of crop residue,
the BRC models from Bush Hog® are equipped with a re-cutter bar design which allows
the material to be cut three times, thereby speeding up crop decomposition. Computerbalanced 10 3/4-inches diameter rotors ensure smooth operation in tough conditions.
Triple-lipped, sealed double row spherical roller bearings, combined with reversible, hard
surfaced cutter knives and 3/16-inch internal steel liners at critical wear areas, ensure
greater reliability in tough conditions. Bush Hog® units are available in 15, 18, 20, and
25-feet operating widths to match various crop conditions and row spacings. Depending
on the model, the BRC row crop flails are available with pull, lift, or semi-mount hitches.
These BRC row crop flails are ready to shred!
2
www.bushhog.com
Bush Hog® Features
• Blades chops through cotton, BT corn stalks, milo, rice, wheat, or vegetable stubble.
• Re-Cutter Bar speeds up decomposition of plant residue to get nutrients back into
the ground quickly.
• Frame provides ground cover to minimize wind and water erosion.
• Sizes available in 15, 18, 20, and 25-feet widths to fit your crop’s
row spacing.
SPECIFICATIONS
BRC115
BRC118
BRC120
BRC125
Cutting Width
180-inches
216-inches
240-inches
300-inches
Overall Width
204-inches
240-inches
264-inches
324-inches
Cutting Height
1-inch to 18-inches
1-inch to 18-inches
1-inch to 18-inches
1-inch to 18-inches
CAT II-III QH Lift,
Semi-Mount, or
Pull Type
CAT II-III QH Lift,
Semi-Mount, or
Pull Type
CAT II-III QH Lift,
Semi-Mount, or
Pull Type
Lift, Semi-Mount,
or Pull Type
10 3/4-inches
10 3/4-inches
10 3/4-inches
10 3/4-inches
Lift
120 HP
130 HP
130 HP
N/A
Semi-Mount
100 HP
110 HP
120 HP
150 HP
Pull-Type
100 HP
110 HP
120 HP
140 HP
207 HP
207 HP
207 HP
207 HP
1,000 RPM
1,000 RPM
1,000 RPM
1,000 RPM
Hitch Types
Cutter Shaft Diameter
Min PTO HP Required
Gearbox Rating**
PTO Type
Hard Surfaced: No “D” Rings
Blades
12,620
12,620
12,620
12,000
No. of Blades
168
200
216
272
Driveline Size
Cat. 5 or 6
Cat. 5 or 6
Cat. 5 or 6
Cat. 5 or 6
5 x 5V Banded Belt
5 x 5V Banded Belt
5 x 5V Banded Belt
5 x 5V Banded Belt
Blade Tip Speed (FPM)
Driveline Protection
Anti-Wrap Seal Protector
Rotor Bearing Protection
2 9/16-inches Double Row Spherical Roller, Triple Sealed
Cutter Shaft Bearings
3/16-inch with 3/16-inch Internal Wear Liner
Hood Thickness
End Plate Thickness
No. of Axles
1/4-inch
1/4-inch
1/4-inch
1/4-inch
4
4
4
4
Wheel Hub Size
5-Bolt
5-Bolt
6-Bolt
6-Bolt
Tire Size/Type
6.70-5 Ribbed
6.70-5 Ribbed
9.5L-15 Ribbed
9.5L-15 Ribbed
Safety Lights
Standard
Standard
Standard
Standard
Weight (Approx.)
4,600-lbs.
4,960-lbs.
5,150-lbs.
6,300-lbs.
www.bushhog.com
3
2501 Griffin Ave.
Selma, Alabama 36703
Tel: 800-363-6096
Fax: 334-874-2701
www.bushhog.com
Bush Hog and
(hog icon) are registered trademarks of Alamo Group Inc. Copyright © 2018
Revised 01/15/2018
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising