Bush Hog | Tiller | Parts Manual | Bush Hog Tiller RTG and GR Series Roto Hog Parts Manual

Bush Hog Tiller RTG and GR Series Roto Hog Parts Manual
RTG SERIES
ROTARY TILLERS
MODELS
RT60G, RT60GR, RT72G, RT72GR,
RT84G, RT84GR
Revised 11/19
PARTS MANUAL
SECTION 42
An Operator’s Manual was shipped with the
equipment. The Operator’s Manual is an integral
part of the safe operation of this machine and
must be maintained with the unit at all times.
READ, UNDERSTAND, and FOLLOW the
Safety and Operation Instructions contained in
this manual before operating the equipment. If
the Operator’s Manual is not with the equipment,
contact your dealer or Bush Hog to obtain a copy
before operating the equipment.
Important
Operating
and Safety Instructions
are found in the Mower
Safety Video that can
be instantly accessed
on the internet at:
www.algqr.com/bve
© 2017 Alamo Group Inc.
To the Owner/Operator/Dealer
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded
operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has
designed this implement to be used with all its safety equipment properly attached to minimize the chance of
accidents.
BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rules
of safety and common sense!
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty RegistrationForm in
full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on theWarranty Card and
on the Warranty Form that you retain.
LIMITED WARRANTY
2222222222222222222222222222222
Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush
Hog dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for
non-commercial, state and municipalities’ use and ninety (90) days for commercial use from date of retail sale. The
obligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defective
parts.
Replacement or repair parts installed in the equipment covered by this limited warranty are warranted for ninety
(90) days from the date of purchase of such part or to the expiration of the applicable new equipment warranty
period, whichever occurs later. Warranted parts shall be provided at no cost to the user at an authorized Bush Hog
dealer during regular working hours. Bush Hog reserves the right to inspect any equipment or parts which are
claimed to have been defective in material or workmanship.
DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES
Bush Hog’s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties, implied or
expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to the sale or
use of the items warranted. Such incidental and consequential damages shall include but not be limited to:
transportation charges other than normal freight charges; cost of installation other than cost approved by Bush
Hog; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of income; rental of
substitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or parts
resulting from acts beyond the control of Bush Hog.
THIS LIMITED WARRANTY SHALL NOT APPLY:
1. To vendor items which carry their own warranties, such as engines, tires, and tubes.
2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.
3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgement
of Bush Hog such use affects its performance, stability or reliability.
4. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner which, in the
sole judgement of Bush Hog, affects its performance, stability or reliability.
5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid, worn
blades, or to normal deterioration of such things as belts and exterior finish due to use or exposure.
6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in the
company’s sole judgement is a wear item.
NO EMPLOYEE OR REPRESENTATIVE OF BUSH HOG IS AUTHORIZED TO CHANGE THIS LIMITED
WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE IN
WRITING AND SIGNED BY BUSH HOG’S SERVICE MANAGER, 2501 GRIFFIN AVE., SELMA, ALABAMA
36703.
2222222222222222222222222222222
Record the model number, serial number and date
purchased. This information will be helpful to your
dealer if parts or service are required.
MODEL NUMBER ________________________________
SERIAL NUMBER ________________________________
DATE OF RETAIL SALE ___________________________
MAKE CERTAIN THE WARRANTY
HAS BEEN FILED WITH BUSH HOG
SELMA, ALABAMA
September, 2019
TABLE OF CONTENTS
RTG SERIES ROTARY TILLERS
MODELS
RT60G, RT60GR, RT72G, RT72GR, RT84G, RT84GR
Skids, Tailgates And Front Covers .........................................................................42-1-1, 42-1-2
Top Deck And Related Parts RT60G,RT60GR, RT72G, RT72GR .....................................42-1-3
Top Deck And Related Parts RT84G, RT84GR S/N 1HDLR1171240096 and Below ........42-1-4
Top Deck And Related Parts RT84G, RT84GR S/N 1HDLR1171240097 and ABOVE......42-1-5
Drives, Driveline And Related Parts....................................................................................42-1-6
Driveshaft Assembly ...............................................................................................42-1-7, 42-1-8
Driveshaft Shielding RT84G, RT84GR ..............................................................................42-1-9
Center Gearbox Assembly ................................................................................................42-1-10
Side Gearbox Assembly .....................................................................................42-1-11, 42-1-12
Outboard Hub Assembly ...................................................................................................42-1-13
Five Foot Tine Bar Assembly ............................................................................................42-1-14
Six Foot Tine Bar Assembly..............................................................................................42-1-15
Seven Foot Tine Bar Assembly.........................................................................................42-1-16
Hitch Extension Kit (Optional) ...........................................................................................42-1-17
Decals.................................................................................................................42-1-18, 42-1-19
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
SKIDS, TAILGATES and FRONT COVERS
(RT60G, RT60GR, RT72G, RT72GR)
1)
u
r
1) y
1!
1)
1@
q
e
w
1% 1*
i
1( 1! 1@
1$
o
1@
1!
1^
1&
Item
No.
Part
No.
1
50074817-10
50074817-16
50074817-23
50074817-28
50074818-10
50074818-16
50074818-23
50074818-28
50074125
50029803
50075127
50075097
50074827
50074848
50074825
50074828
50075506
50075093
19487BH
45111BH
45070BH
45307BH
45059BH
1273BH
45086BH
45105BH
45066BH
50075556
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1#
y
1)
1(
t
Description
Tailgate (Red) for 5’ Models
Tailgate (Green) for 5’ Models
Tailgate (Orange) for 5’ Models
Tailgate (Blue) for 5’ Models
Tailgate (Red) for 6’ Models
Tailgate (Green) for 6’ Models
Tailgate (Orange) for 6’ Models
Tailgate (Blue) for 6’ Models
Shackle, Anchor
Chain, 9 Link
Tailgate Rod, 5’ Models
Tailgate Rod, 6’ Models
Skid Weldment, LH
Skid Adjuster
Skid Weldment, RH
Kickstand
Shield for 5’ Reverse Rotation
Shield for 6’ Reverse Rotation
Capscrew 1/2” x 1-3/4” Gr.5
Lockwasher 1/2”
Hex Nut 1/2”
Cotter Pin 3/16” x 1-1/2”
Flatwasher 1/2”
Presto Pin
Capscrew 3/8” x 1”
Locknut 3/8”
Flatwasher, 5/8”
Side Plate
1!
1) 1@
1)
Qty.
Req’d.
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
6
6
6
1
1
2
6
6
2
2
42-1-1
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
SKIDS, TAILGATES and FRONT COVERS
(RT84G, RT84GR)
1)
y
1)
u
r
q
e
1!1@
w
1% 1*
i
1( 1! 1@
1$
o
1^
1&
Item
No.
Part
No.
1
50074819-10
50074819-16
50074819-23
50074819-28
50074125
50029803
50075297
50074827
50074848
50074825
50074828
50075507
19487BH
45111BH
45070BH
45307BH
45059BH
1273BH
45086BH
45105BH
45066BH
50075556
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Description
y
1@
1!
1(
1) t
1@1!
1#
1)
1)
Qty.
Req’d.
Tailgate (Red), for 7’ Models
Tailgate (Green), for 7’ Models
Tailgate (Orange), for 7’ Models
Tailgate (Blue), for 7’ Models
Shackle, Anchor
Chain, 9 Link
Tailgate Rod, 7’ Models
Skid Weldment, LH
Skid Adjuster
Skid Weldment, RH
Kickstand
Shield for 7’ Reverse Rotation
Capscrew 1/2” x 1-3/4” Gr.5
Lockwasher 1/2”
Hex Nut 1/2”
Cotter Pin 3/16” x 1-1/2”
Flatwasher 1/2”
Presto Pin
Capscrew 3/8” x 1”
Locknut 3/8”
Flatwasher, 5/8”
Side Plate
1
1
1
1
1
1
1
1
2
1
1
1
6
6
6
1
1
2
6
6
2
2
42-1-2
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
TOP DECK AND RELATED PARTS
(RT60G, RT60GR, RT72G, RT72GR)
2@
2#2$2%
2^
y
1% 1*1(2)2!
t
q
1!
2#2$2%
2^
t
u
io
1^1&
1!
1*1(2)2!
i
o
1
50075108-10
50075108-16
50075108-23
50075108-28
50075109-10
50075109-16
50075109-23
50075109-28
50075101-10
50075101-16
50075101-23
50075101-28
50075103
50033665
20508
15925
15805
45075BH
20206
15165BH
63765
2
3
4
5
6
7
8
9
10
11
12
o
i
1)
o
o
1$
Part
No.
e
o
1# 1$
Item
No.
r
1)
i
i
1@
r
Description
“A” Frame RH (Red)
“A” Frame RH (Green)
“A” Frame RH (Orange)
“A” Frame RH (Blue)
“A” Frame LH (Red)
“A” Frame LH (Green)
“A” Frame LH (Orange)
“A” Frame LH (Blue)
Cover, Red
Cover, Green
Cover, Orange
Cover, Blue
Mast Bar
Cat I Bushing
Capscrew 5/8” x 4-1/2” Gr.5
Flatwasher 5/8”
Lockwasher 5/8”
Hex Nut 5/8”
Capscrew 5/8” x 2” Gr.8
Capscrew 5/8” x 1-3/4” Gr.5
Lift Pin Cat I
w
i
1!
1#
1@
Qty.
Req’d.
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
7
7
2
4
2
Item
No.
Part
No.
13
14
15
16
17
18
19
20
21
22
23
24
25
26
15824
44061BH
19043
45305BH
45300BH
45086BH
45063
45113
45073
50035829
45160
45112BH
45071BH
15907BH
Description
Lockwasher 7/8”
Hex Nut 7/8”UNF
Capscrew 3/4” x 3-3/4” Gr.5
Lockwasher 3/4”
Hex Nut 3/4”
Capscrew 3/8” x 1-3/4”
Flatwasher 3/8”
Lockwasher 3/8”
Hex Nut 3/8”
Manual Tube
Capscrew 1/4” x 1”
Lockwasher 1/4”
Hex Nut 1/4”
Flatwasher, 5/16”
Qty.
Req’d.
2
2
1
1
1
4
4
4
4
1
2
2
2
2
42-1-3
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
TOP DECK AND RELATED PARTS
(RT84G, RT84GR Serial Numbers 1HDLR1171240096 AND BELOW)
2&
r
2$
2%
2#
1(2)
y ut
r
i
1^
q
1!
i
o
2
3
4
5
6
7
8
9
10
w
o
i
1%
1# i
Description
“A” Frame RH (Red)
“A” Frame RH (Green)
“A” Frame RH (Orange)
“A” Frame RH (Blue)
“A” Frame LH (Red)
“A” Frame LH (Green)
“A” Frame LH (Orange)
“A” Frame LH (Blue)
Cover, Red
Cover, Green
Cover, Orange
Cover, Blue
Mast Bar
Cat I Bushing
Capscrew 5/8” x 4-1/2” Gr.5
Flatwasher 5/8”
Lockwasher 5/8”
Hex Nut 5/8”
Capscrew 5/8” x 2” Gr.8
1!
1!
1$
Qty.
Req’d.
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
7
7
2
1)
oi
i
o
1# 1%
50075108-10
50075108-16
50075108-23
50075108-28
50075109-10
50075109-16
50075109-23
50075109-28
50075101-10
50075101-16
50075101-23
50075101-28
50075103
50033665
20508
15925
15805
45075BH
20206
i
o
o
1$
1
e
t2!2@ 1*
1)
1@
Part
No.
o
1&
1(2)2!2@
1!
Item
No.
2^
1@
Item
No.
Part
No.
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
15165BH
50075144
2850005
91062
91061
19043
45305BH
45300BH
45086BH
45063
45113
45073
50035829
45160
45112BH
45071BH
15907BH
Description
Capscrew 5/8” x 1-3/4” Gr.5
Pin Weldment, RT
Klik Pin, .44” x 1.75”
Spacer, Cat 2 STD
Spacer
Capscrew, 5/8” x 2” Gr. 5
Lockwasher, 3/4”
Hex Nut, 3/4”
Capscrew 3/8” x 1-3/4”
Flatwasher 3/8”
Lockwasher 3/8”
Hex Nut 3/8”
Manual Tube
Capscrew 1/4” x 1”
Lockwasher 1/4”
Hex Nut 1/4”
Flatwasher, 5/16”
Qty.
Req’d.
4
2
2
2
2
1
1
1
4
4
4
4
1
2
2
2
2
42-1-4
© 2017 Alamo Group Inc.
Marterial Handling Repair Parts Manual
TOP DECK AND RELATED PARTS
(RT84G, RT84GR Serial Numbers 1HDLR1171240097 AND ABOVE)
2&
r
2$
2%
2#
2^
r
y ut
1(2)
o
1&
1^
q
1!
i
1(2)2!2@
1!
t2!2@ 1*
1)
i
o
io
1@
1$
1%
1#
e
io
w
o
1)
oi
i
o
i
1!
1!
1# 1%
Item
No.
Part
No.
1
50076519-10
50076519-16
50076519-23
50076519-28
50077040-10
50077040-16
50077040-23
50077040-28
50075101-10
50075101-16
50075101-23
50075101-28
50075103
50033665
20508
15925
15805
45075BH
20206
2
3
4
5
6
7
8
9
10
Description
“A” Frame RH (Red)
“A” Frame RH (Green)
“A” Frame RH (Orange)
“A” Frame RH (Blue)
“A” Frame LH (Red)
“A” Frame LH (Green)
“A” Frame LH (Orange)
“A” Frame LH (Blue)
Cover, Red
Cover, Green
Cover, Orange
Cover, Blue
Mast Bar
Cat I Bushing
Capscrew 5/8” x 4-1/2” Gr.5
Flatwasher 5/8”
Lockwasher 5/8”
Hex Nut 5/8”
Capscrew 5/8” x 2” Gr.8
Qty.
Req’d.
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
7
7
2
1$
1@
Item
No.
Part
No.
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
15165BH
50075144
2850005
91062
91061
19043
45305BH
45300BH
45086BH
45063
45113
45073
50035829
45160
45112BH
45071BH
15907BH
Description
Capscrew 5/8” x 1-3/4” Gr.5
Pin Weldment, RT
Klik Pin, .44” x 1.75”
Spacer, Cat 2 STD
Spacer
Capscrew, 5/8” x 2” Gr. 5
Lockwasher, 3/4”
Hex Nut, 3/4”
Capscrew 3/8” x 1-3/4”
Flatwasher 3/8”
Lockwasher 3/8”
Hex Nut 3/8”
Manual Tube
Capscrew 1/4” x 1”
Lockwasher 1/4”
Hex Nut 1/4”
Flatwasher, 5/16”
Qty.
Req’d.
4
2
2
2
2
1
1
1
4
4
4
4
1
2
2
2
2
42-1-5
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
DRIVES, DRIVELINE AND RELATED PARTS
(ALL MODELS)
i
o
1)
2#
1(
r
1@
2)2!2@
1$ 1%
u
1&
1!
1)
o
t
o
1^
1*
o
q
w
e
1#
1$
1%
1@
1@
1@
1@
o
Item
No.
Part
No.
1
50075156
50075151
50075157
50075148
50071676
50071701
50071706
50075098
50075249
50075260
50071675
44094BH
45111BH
45059BH
44076BH
2
3
4
5
6
7
8
9
10
11
Description
Qty. Item
Req’d. No.
Tubing, Cover for 5’
1
Tubing, Cover for 6’
1
Tubing, Cover for 7’
1
Bracket, Tubing
2
Shaft, Hex for 5’
1
Shaft, Hex for 6’
1
Shaft, Hex for 7’
1
Gearbox Plate
1
Gearbox Assy., Center
1
Gearbox Assy, Side
1
Hub Assy., Outboard
1
Capscrew 1/2” x 1-1/4” Gr.5 2
Lockwasher 1/2”
20
Flatwasher 1/2”
4
Capscrew 1/2” x 1-1/2” Gr.5 2
Part
No.
12
13
14
15
16
17
18
19
45070BH
45086BH
45113
45073
20961
45087BH
19487BH
50075248
20
21
22
23
1160806
45112BH
15907BH
50071668
50080581
o
1*
o
1*
1@ o
y
1*
1*
Description
Qty.
Req’d.
Hex Nut 1/2”
Capscrew 3/8” x 1” Gr.5
Lockwasher 3/8”
Hex Nut 3/8”
Capscrew 1/2” x 1-3/4” Gr.5
Capscrew 3/8” x 1-3/4”
Capscrew 1/2” x 1-3/4”
Shield Assy. (See Note Below)
(For Later Models RT84G & RT84GR
See pg 42-1-9 for Shielding)
Capscrew 1/4” x 3/4” Gr.5
Lockwasher 1/4”
Flatwasher, 5/16”
Driveshaft Assy (See Note Below)
Driveshaft Assy, 4 Plate Clutch
(For Later Models RT84G & RT84GR)
14
4
10
10
4
6
12
1
4
4
4
1
1
Note: Used on RT60G, RT60GR, RT72G, RT72GR
and Earlier Models RT84G, RT84GR
42-1-6
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
DRIVESHAFT ASSEMBLY
(Models: RT60G, RT60GR, RT72G & RT72GR &
Earlier Models RT84G, RT84GR)
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
50072088
50072089
50072090
50072091
50072092
50072093
50072094
50072095
50072096
50072097
50072098
50072099
50072101
50072102
Description
Push Pin End Yoke
Cross Bearing
Outer Triangle Yoke
Nylon Bearing
Inner Nylon Bearing
Inner Triangular Yoke
Friction Clutch Assy.
Push Pin
Push Pin Spring
Decal, Outer
Tension Pin M8 x 60
Tension Pin M8 x 55
Decal, Inner
Friction Disk
Qty.
Req’d.
Ref.
No.
Part
No.
1
2
1
1
1
1
1
1
1
1
1
1
1
1
15
16
17
18
19
20
21
22
23
24
25
26
27
50078224
50078225
50078226
50078227
50078228
50078229
50078230
50078231
50078232
50078541
50078234
50072103
50071668
Description
Qty.
Req’d.
Hex Nut M10
Spring
Bolt M10 x 80
Flanged Yoke
Bushing
Hub
Bolt M12-1.25 x 65
Washer
Nut M12
Internal Disc
Outer Pressure Plate
Complete Shield Pk.
Driveshaft Assembly
8
8
8
1
1
1
1
1
1
1
1
1
1
42-1-7
© 2017 Alamo Group Inc.
Marterial Handling Repair Parts Manual
DRIVESHAFT ASSEMBLY
(For Later Models: RT84G & RT84GR)
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
50072088
50072089
50072090
-------50072091
----------------------------50072092
-------50072093
50080582
50072095
50072096
50072097
50072098
50072099
Description
Push Pin End Yoke
Cross Bearing
Outer Triangle Yoke
Outer Triangle Tube
Nylon Bearing
Plastic Cone
Outer Plastic Tube
Inner Plastic Tube
Plastic Cone
Inner Nylon Bearing
Inner Triangle Tube
Inner Triangle Yoke
4FF3 Friction Yoke
Push Pin
Push Pin Spring
Outer Sticker
Tension Pin 08 x 60
Tension Pin 08 x 55
Qty.
Req’d.
Ref.
No.
Part
No.
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
50072101
50078224
50080583
50080584
50080585
50078228
50080586
50080587
50080588
50080589
50080590
50080591
50078231
50078232
50080581
Description
Qty.
Req’d.
Inner Sticker
Hex Nut
Spring
Bolt
Flanged Yoke
Bushing
Friction Disc
Baffle
Internal Disc
Hub
Outer Pressure Plate
Bolt
Washer
Nut
Driveshaft Assembly
1
8
8
8
1
1
4
1
2
1
1
2
2
2
1
42-1-8
© 2017 Alamo Group Inc.
Marterial Handling Repair Parts Manual
DRIVESHAFT SHIELDING
USED FOR DRIVELINE ASSEMBLY 50080581
(For Later Models: RT84G & RT84GR)
September, 2019
4
5
4 5
1
5 4
4
5
6
3
Ref.
No.
Part
No.
1
2
3
4
5
6
50081323
50081328
D546
1160806
45112BH
45065BH
2
Description
Cover
Cover Mount Assy
Decal, Danger (Guard Missing)
Capscrew, 1/4” x 3/4” G5 ZP
Lockwasher, 1/4” YZ
Flatwasher, 5/16” YZ
Qty.
Req’d.
1
1
1
7
7
4
42-1-9
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
CENTER GEARBOX ASSEMBLY
27
Item
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
50072008
50072009
50072010
50075263
50072012
50075262
50072014
50075522
50072016
50072017
50072018
50072019
50075261
50072021
12
13
Description
Shaft, Output
Key
Gear, Output
Housing, Gearbox
Cap, Input
Gear Shaft, Input
Seal
Retaining Ring
Screw
Washer
Gasket .3MM Thick
Gasket .5MM Thick
Bearing
Bearing
Qty.
Req’d.
Item
No.
Part
No.
1
1
1
1
1
1
1
1
4
4
1
1
1
2
14
15
16
17
18
19
20
21
22
23
24
25
26
27
50072022
50072023
50072024
50072025
50072026
50072027
50072028
50072029
50072030
50072031
50072032
50072033
50075264
50075249
Description
Bearing
Retaining Ring
Seal
Gasket, Rectangle
Cap
Washer
Screw
Pipe Plug - Inner
Pipe Plug, Sq. Head
Relief, Pressure
Retaining Ring
Washer
Snap Ring
Gearbox Assembly
Qty.
Req’d.
2
2
2
1
1
4
4
1
1
1
1
1
2
1
42-1-10
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
SIDE GEARBOX ASSEMBLY
40
42-1-11
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
SIDE GEARBOX ASSEMBLY
Item
No.
1
2
3
4
5
6
7
8
9
10
11
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Part
No.
50075267
50072035
50072036
50072037
50072038
50072039
50072066
50071994
50072068
50072069
50078223
50072071
50072072
50072073
50072074
50075517
50075268
50072077
50072078
50072079
50072028
50072027
50071998
50071999
50072080
50072002
50072081
50072022
50072082
50072023
50072083
50072087
50072085
50075518
50072031
50075519
50075520
50077061
50075260
Description
Plate, Side Housing
Saddle, Input Bearing
Spacer
Sealed Cap
Shaft, Input Gear
Gasket .5mm, Input
Gasket .3mm, Input
Washer
Pinion Gear
Gear, Output
Flange w/output Shaft
Bearing Saddle, Output
Spacer
Gasket .5mm, Output
Gasket .3mm, Output
Seal
Side Cover
Seal, Output
Bearing
Retaining Ring
Screw
Washer
Screw
Hub Washer
Ball Bearing
Seal
Retaining Ring
Bearing
Retaining Ring
Retaining Ring
Screw
Flatwasher
Screw , Inner Hex
Flatwasher
Pressure Relief Plug
Seal Ring 10MM.
Flatwasher
Snap Ring
Side Gearbox Assy.
Qty.
Req’d.
1
1
1
1
1
*
*
2
1
1
1
1
1
*
*
1
1
2
1
1
7
29
2
2
1
1
1
2
2
1
17
1
6
16
1
1
1
1
1
*As Required
42-1-12
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
OUTBOARD HUB ASSEMBLY
15
1
13
14
4
12
8
9
2
5
3
11
6
7
10
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
50071992
50071993
50071994
50071995
50071996
50071997
50071997
50071998
50071999
50072000
50072001
50072077
50072003
50072004
50071675
Description
Qty.
Req’d.
Bearing Saddle
Hub Cap
Ring
Flange w/ Output Shaft
Hub Shaft
Hub Gasket
Hub Gasket
Screw
Hub Washer
Ball Bearing
Hub Nozzle
Seal
Screw
Hub Washer
Outboard Hub Assy.
1
1
1
1
1
*
*
1
1
1
1
2
6
6
1
* As Required
42-1-13
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
FIVE FOOT TINE BAR ASSEMBLY
6
3
2
5
1
4
Ref.
No.
Part
No.
1
2
3
4
5
6
50072005
50071671
08311800
50020933
50071677
50071695
50071696
Description
5’ Tine Bar Assy.
Bolt 9/16” x 1-1/2” NF Gr. 5
Hex Nut 9/16” NF
Lockwasher 9/16”
5’ Bar
Tine RH
Tine LH
Qty.
Req’d.
1
84
84
84
1
21
21
42-1-14
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
SIX FOOT TINE BAR ASSEMBLY
6
3
2
5
1
4
Ref.
No.
Part
No.
1
2
3
4
5
6
50072006
50071671
08311800
50020933
50071700
50071695
50071696
Description
6’ Tine Bar Assy.
Bolt 9/16” x 1-1/2” NF Gr. 5
Hex Nut 9/16” NF
Lockwasher 9/16”
6’ Bar
Tine RH
Tine LH
Qty.
Req’d.
1
108
108
108
1
27
27
42-1-15
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
SEVEN FOOT TINE BAR ASSEMBLY
6
2
5
3
1
4
Ref.
No.
Part
No.
1
2
3
4
5
6
50072007
50071671
08311800
50020933
50071707
50071695
50071696
Description
7’ Tine Bar Assy.
Bolt 9/16” x 1-1/2” NF Gr. 5
Hex Nut 9/16” NF
Lockwasher 9/16”
7’ Bar
Tine RH
Tine LH
Qty.
Req’d.
1
132
132
132
1
33
33
42-1-16
© 2017 Alamo Group Inc.
Marterial Handling Repair Parts Manual
November, 2019
HITCH EXTENSION KIT (Optional)
50081431
2
Existing Nuts
& Washers
3
1
4
5
4
2
1
3
Existing Pins
w/Nuts
Ref.
No.
Part
No.
1
2
3
4
5
50081418
------------15824
19503
Description
Lift Arm
Capscrew, 5/8” x 2-1/2” Gr. 5 ZP
Capscrew, 7/8” x 3” Gr. 5 ZP
Lockwasher, 7/8” CP
Hex Nut, 7/8”, CP
Qty.
Req’d.
2
4
2
2
2
42-1-17
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
DECALS
(RT60G, RT60GR, RT72G, RT72GR)
1$
1!
e
1%
t
i
y
1@
u
1!
r
w
1^
1#
o
1)
q
ITEM
PART NO.
DESCRIPTION
1
2
N/A
50075239
50075523
50075240
50075524
50061049
50075245
50076462
50074259
50035829
D859
D546
D547
50031214
50031212
81067
78413
D628
D829
Serial No. Decal
Decal, Model Number RT60G
Decal, Model Number RT60GR
Decal, Model Number RT72G
Decal, Model Number RT72GR
Decal, Bush Hog Logo
Decal, Roto Hog Series
Decal, Gear Drive Logo
Decal, Made in USA
Storage Tube, Operators Manual
Decal, Genuine Parts Warning
Decal, Danger (Guard Missing)
Decal, Danger
Decal, Red Reflector
Decal, Amber Reflector
Decal, Keep Away Rotating Tines
Decal, Read Manual
Decal, Crush Hazard / Pinch Points
Decal, Danger Multilingual
3
4
5
6
7
8
9
10
11
12
13
14
15
16
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
42-1-18
© 2017 Alamo Group Inc.
Material Handling Repair Parts Manual
DECALS
(RT84G, RT84GR)
1^
1%
e
t
1!
i
1$
y
u
r
1!
1@
w
1#
o
1)
q
ITEM
PART NO.
DESCRIPTION
1
2
N/A
50075241
50075524
50061049
50075245
50076462
50074259
50035829
D859
D546
D547
50031214
50031212
81067
78413
D628
D829
Serial No. Decal
Decal, Model Number RT84G
Decal, Model Number RT84GR
Decal, Bush Hog Logo
Decal, Roto Hog Series
Decal, Gear Drive Logo
Decal, Made in USA
Storage Tube, Operators Manual
Decal, Genuine Parts Warning
Decal, Danger (Guard Missing)
Decal, Danger
Decal, Red Reflector
Decal, Amber Reflector
Decal, Keep Away Rotating Tines
Decal, Read Manual
Decal, Crush Hazard / Pinch Points
Decal, Danger Multilingual
3
4
5
6
7
8
9
10
11
12
13
14
15
16
QTY.
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
42-1-19
© 2017 Alamo Group Inc.
• SELMA, AL 3670
WWW.BUSHHOG.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising