Bush Hog | TD Tri-Deck Finishing Mowers | Spec sheet | Bush Hog TD Tri-Deck Finishing Mowers Spec Sheet

Bush Hog TD Tri-Deck Finishing Mowers Spec Sheet
Performance
You Can
Count
On™
FINISHING MOWERS
& TRI-DECKS
ATH SERIES | RDTH SERIES | TD SERIES
ATH SERIES
AIR TUNNEL FINISHING MOWER
IMPECCABLE GROOMING.
If a beautiful, smooth, contoured appearance is important, you want Bush Hog®. Our finishing mowers
are ideal for contractors, government entities, lawncare professionals, contractors, property owners,
and homeowners with large lawns. Everything about these machines is designed for performance.
Floating A-frames, hitch arms, and clevis hitch follow ground contours and provide extra protection
from obstacles. Offset wheels prevent tracking and soil compaction. Three overlapping blades
produce a smooth, yard-like finish. Available in widths up to 90 inches, these mowers are built for low
maintenance and years of trouble-free performance.
2
www.bushhog.com
BUSH HOG® Is Built For Better Performance And Durability
• Bush Hog® Gearboxes with tapered roller bearings
• Aramid Cord Reinforced Belts with proven
• A-Frames float from two different positions to follow
• Fabricated Decks deliver greater strength and rigidity
• Axle Arms built for long life are equipped with offset
• Genuine Bush Hog® Blades are heat treated uplift
provide longer life and greater protection in tough mowing
conditions. Gearboxes are built to exacting Bush Hog
standards.
ground contours and provide extra protection when riding
over obstacles. Lower hitch arms float where they are
attached to the frame and the clevis hitch floats where the
tractor top link attaches.
wheels designed to prevent tracking and reduce soil
compaction.
Bush Hog® design deliver better performance with less
maintenance than competitive machines by using only
one belt.
in tough mowing conditions. The 7-gauge decks resist
wear from air flow and sand that shortens life of standard
decks. Leading edge is formed at a 90 degree angle to
resist bending.
blades that deliver a smooth cut and long life even in
sandy conditions.
• Field Proven Spindle Assemblies provide years
of maintenance-free service. Grease fittings are easily
serviced through convenient openings in the shields.
Create a manicured appearance even
in thick, damp conditions
SPECIFICATIONS
MODEL
ATH-900
Cutting Width
90 inches
Cutting Height (1/2 inch increments)
1 to 6 inches
Tractor HP Range
35 - 55 PTO
• 90-inch cutting width
Type Hitch
Category I
Size Blades
1/4 x 3 x 31-1/2 inches
Number of Blades
3
Blade Tip Speed
15,621 FPM
Blade Overlap
2-1/4 inches
Blade Uplift
Driveline Size
Front Roller Size (optional)
• Parallel uplift blades lift grass for cleaner cut
3 x 13 inches
Right side
7 gauge
Tire Size
•Tunnel easily accommodates large volume of clippings
ASAE Cat. 3
Deck Plate
• 7-gauge steel deck
• Deck reinforcement at each spindle assembly
13 x 5 inches
(solid tire)
Belt
Gearbox
Tractor PTO Speed
Belt Adjustment
Approx. Weight
• Designed for thick and damp conditions
•Curved left front deck edge with tight center baffle directs
material into tunnel
Parallel
Discharge
• For 35 to 55 HP tractors
“C” size Aramid Cord
55 HP
•High blade tip speeds (15,621 FPM) force air and material into
and through tunnel
• Blades overlap for quality appearance
540 RPM
Spring Loaded Idler
•Spring-loaded idler is easy to adjust
•Easy cutting height adjustment from 1 to 6 inches in ½-inch
increments
1164 lbs.
Options
Front Roller
Warranty
1-year limited warranty
with a 5-year gearbox
limited warranty
•Easy-lift tabs for quick lubrication of blade spindles
www.bushhog.com
3
RDTH SERIES
REAR DISCHARGE FINISHING MOWER
A CUT ABOVE THE REST.
Available in cutting widths of 60, 72, and 84 inches, the RDTH Series is designed
to deliver a smooth, even cut with the superior distribution of rear discharge.
Floating top and lower links allow for a uniform cut on uneven terrain and high
blade tip speeds prevent streaking. Cutting height is easily adjustable from
1 to 6 inches. The closed box design and heavy rear discharge chain shielding
reduces potential damage from thrown rocks and other debris.
4
www.bushhog.com
Smooth, even cut with the superior
distribution of rear discharge
• 60- to 84-inch cutting widths
• For 15 to 55+ HP tractors
• Designed to deliver the quality distribution of rear discharge
• Floating top and lower links for uniform cut on uneven terrain
• High (18,000 plus FPM) blade tip speed prevents streaking
• Bush Hog® field proven spindles
• Single Aramid Cord reinforced belt
• Easy-to-use grease zerk in caster stem
• Spring-loaded idler adjusts belt tension
• Rear chains standard on RDTH-60 and RDTH-72
• Flared deck design on RDTH-84
• Easy cutting height adjustment from 1 to 6 inches
• 7-gauge steel deck
SPECIFICATIONS
MODEL
RDTH-60
RDTH-72
RDTH-84
Cutting Width
60 inches
72 inches
84 inches
1-1/2 to 6-1/2 inches
1-1/2 to 6-1/2 inches
1-1/2 to 5-1/2 inches
15 - 35 PTO
20 - 40 PTO
30 - 55 PTO
Type Hitch
Category I
Category I
Category I
Size Blades
1/4 x 2.5 x 21 inches
1/4 x 2.5 x 25 inches
5/16 x 2.5 x 29 inches
3
3
3
Blade Tip Speed
18,231 FPM
18,272 FPM
18,475 FPM
Blade Overlap
1-1/2 inches
1-1/2 inches
1-1/2 inches
Parallel
Parallel
Parallel
ASAE Category 3
ASAE Category 3
ASAE Category 3
3 x 5 inches
3 x 5 inches
3 x 13 inches
Discharge
Rear
Rear
Rear
Deck Plate
7 gauge
7 gauge
7 gauge
3-1/4 x 10-1/4 inches
3-1/4 x 10-1/4 inches
4 x 10 inches
(solid tire)
(solid tire)
(solid tire)
“B” size Aramid Cord
“B” size Aramid Cord
“B” size Aramid Cord
45 HP
45 HP
55 HP
540 RPM
540 RPM
540 RPM
Belt Adjustment
Spring Loaded Idler
Spring Loaded Idler
Spring Loaded Idler
Approx. Weight
536 lbs.
588 lbs.
874 lbs.
Front Roller Kit
Front Roller Kit
Front Roller Kit
Cutting Height
(1/2 inch increments)
Tractor HP Range
Number of Blades
Blade Uplift
Driveline Size
Front Roller Size (optional)
Tire Size
Belt
Gearbox
Tractor PTO Speed
Options
Warranty
1-year limited warranty with a 5-year gearbox limited warranty
www.bushhog.com
5
TD SERIES
TRI-DECK FINISHING MOWERS
The Bush Hog® line of Tri-Deck Finishing Mowers are perfect wherever a well-groomed cut
is needed. With available mowing widths of 11, 15 and 17 feet, there is certain to be a size
to fit your needs. Power requirements start at only 30 HP for the TD1100 and range up to
45 HP for the TD1700. Chances are you already have a tractor that is compatible with at
least one of these mowers.
The entire TD line is well suited for golf courses, municipalities, sporting complexes, and
homeowers with large acreages.
The high blade tip speed and 6-inch deck overlap assures a uniform cut with no streaking.
Built “Bush Hog Tough,” this line is designed to withstand thousands of hours of use with
minimal downtime.
With a choice of three models, the TD Series meets your expectations of quality mowers
from “The Factory Where Legends Are Built.”
6
www.bushhog.com
Bush Hog® Features
The adjustable clevis hitch,
along with the standard
tongue jack, allows one
person to attach mower
to the tractor. The safety
tow chain is standard
equipment.
for Sod Farms, Golf Courses, Parks, Recreation Areas...
• Streamlined deck design
• Reinforced mainframe
construction
• Independent deck flotation
• Heavy duty Aramid Cord
belting
• Large transport wheels for
better flotation and stability
• Deck Gearbox – 45 HP
• Heavy duty divider gearbox
• Economical pricing, choice
of widths
• Adjustable clevis hitch
• Greaseable blade spindles
• Standard front anti-scalp
rollers
• Narrow transport width
The 3 x 5-inches anti-scalp front roller is
standard equipment for all decks.
SPECIFICATIONS
TD1100
11 feet
3/4 inch to 4-1/4 inches
Cutting Width
Cutting Height
Deck Widths
7 gauge
6 inches
1-1/2 inches
Rear
Standard equipment
Single Aramid Cord “B” section
per deck
TD1500
15 feet
1-1/2 inches to 4-1/2 inches
(1) 72-inch deck,
(2) 60-inch decks
7 gauge
6 inches
1-1/2 inches
Rear
Standard equipment
Single Aramid Cord “B” section
per deck
7 gauge
6 inches
1-1/2 inches
Rear
Standard equipment
Single Aramid Cord “B” section
per deck
(12) 11-inch x 4-inch
pneumatic w/roller bearings
(12) 13-inch x 5-inch x 6-inch
pneumatic w/roller bearings
(12) 13-inch x 5-inch x 6-inch
pneumatic w/roller bearings
30 HP minimum
540
40 HP minimum
540
3316 (60 inches),
2792 (72 inches)
95-1/2 inches wide,
95-1/2 inches high, 166 inches long
(2) 23 inches x 9-1/2 inches
x 12 inches
30° up and 10° down
Pull type/clevis,
3 position adjustable
Cat IV 80° CV (main),
Cat. III wing
10° side to side,
10° front to rear
Spring loaded idler
18,231 (60 inches),
18,272 (72 inches) FPM
Standard
45 HP minimum
540
(3) 48-inch decks
Deck Construction
Deck Overlap
Blade Overlap
Material Discharge
Rear Chains
Belts
Gauge Wheels
Tractor HP Required*
Gearbox RPM
Spindle RPMs
4150
Belt Adjustment
78 inches wide, 75 inches high,
146 inches long
(2) 23 inches x 9-1/2 inches
x 12 inches
30° up and 10° down
Pull type/clevis,
3 position adjustable
Cat IV 80° CV (main),
Cat. III wing
10° side to side,
10° front to rear
Spring loaded idler
Blade Tip Speed
18,468 FPM
Transport Dimensions
Trans. Tires (w/taper.
roll.bearings)
Wing Flex
Hitch
Driveline Size
Wing Deck Flex (ind. of
wing frame)
Parking Jack
Standard
* HORSEPOWER SUBJECT TO CHANGE DUE TO MOWING CONDITIONS
TD1700
17 feet
1-1/2 inches to 4-1/2 inches
(3) 72-inch decks
2792
95-1/2 inches wide, 107-1/2 inches
high, 166 inches long
(2) 23 inches x 9-1/2 inches
x 12 inches
30° up and 10° down
Pull type/clevis,
3 position adjustable
Cat IV 80° CV (main),
Cat. III wing
10° side to side,
10° front to rear
Spring loaded idler
18,272 FPM
Standard
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.bushhog.com
7
2501 Griffin Ave.
Selma, Alabama 36703
Tel: 800-363-6096
Fax: 334-874-2701
www.bushhog.com
Bush Hog and
(hog icon) are registered trademarks of Alamo Group Inc. Copyright © 2017
Revised 10/15/2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising