Bush Hog | Backhoe CBH Series | Spec sheet | Bush Hog Speed Seeder Series — Drill Parts Manual

Bush Hog Speed Seeder Series — Drill Parts Manual
CONSTRUCTION, LANDSCAPE
& TILLAGE
Path to New Horizons
Index of Products
Construction
Pull Dirt Scrapers..........................................................................................................................2
Post Hole Diggers.........................................................................................................................4
Hydraulic Post Hole Diggers.........................................................................................................6
Backhoes.......................................................................................................................................8
Pressure Washers.......................................................................................................................12
Generator/Compressor/Welder Units........................................................................................14
Skid Steer Buckets......................................................................................................................16
Grapples......................................................................................................................................20
Pallet Forks.................................................................................................................................24
Landscape
Compact Implements (Rear Blades, Box Blades, Tillers, Road Grader, Rakes)........................26
Rear Mounted Blades.................................................................................................................28
Box Blades..................................................................................................................................32
Road Grader................................................................................................................................37
Landscape Rakes........................................................................................................................41
Pulverizers..................................................................................................................................42
Pluggers......................................................................................................................................43
Speed Seeders........................................................................................................................... 44
Spreader..................................................................................................................................... 46
Tillage
Compact Implements (Standard Duty Subsoiler, Layoff Plow, Cultivator)..............................47
Rotary Tillers (See Landscape Section for Compact Tiller)......................................................49
Lift Disc Harrows.........................................................................................................................51
Pull Disc Harrows........................................................................................................................53
All Purpose Plow.........................................................................................................................55
Heavy Duty Subsoilers...............................................................................................................57
Pasture Aerators.........................................................................................................................59
www.bushhog.com / 1
DSP SERIES
CONSTRUCTION
PULL DIRT SCRAPERS
Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is
ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available
in 8’, 10’ and 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the
standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material
can be transferred by dragging it to nearby locations and raising the scraper to deposit the load.
Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated
material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125
horsepower tractors and have replaceable wear plates on the sides.
2 / www.bushhog.com
PULL DIRT SCRAPERS SPECIFICATIONS
Description
DSP8
DSP10
Horsepower Rating
Transport Width
Working Width
Capacity
DSP12
70 to 125
97”
121”
145”
96 3/16”
120 3/16”
144 3/16”
1 3/4 cu. yds.
2 1/4 cu. yds.
2 3/4 cu yds.
Weight with Weight Box
without material in wieght box
Tilt Axle
1525
1645
1700
No Tilt Axle
1405
1525
1580
Weight of Material in Weight Box
760
Depth of Box
39”
Maximum Cutting Depth
5” below grade
Dump Clearance
Maximum Tilt Depth To the Right
Maximum Tilt angle
Tongue Construction
21”
7”
7 5/8”
8 1/4”
3 1/2°
4” x 4” x 1/4” tubing
Side Plate Construction
3/8” x 24 5/16” high x 39 3/4” deep
Moldboard Construction
1/4” x 24 1/4” high when formed
Cutting Edge
1/2” x 6” reversible & replacable
Cutting Edge Reinforcment
Tires
Maximum Transport Speed
3” x 3” x 5/16” angle plus a 1/4” mold board = 9/16” at the cutting edge.
New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC
20 MPH
Lift Cylinder
3 1/2” x 8” ASAE
Tilt Cylinder
3 1/2” x 8” ASAE
www.bushhog.com / 3
CONSTRUCTION
Built To Last.
PHD SERIES
CONSTRUCTION
POST HOLE DIGGERS
Model PHD2403 shown
Whether you need to drill holes for posts, tree plantings, structural support members, or other tasks,
Bush Hog® has a post hole digger to meet your needs. Our three 2400 Series models fit both Cat. 1 and
Cat. 2 tractors. Augers are offered in both standard and heavy duty versions in sizes from 6 inches to 24
inches depending on digger model. Tough soil penetration is no problem for the powerful Bush Hog® post
hole diggers.
4 / www.bushhog.com
CONSTRUCTION
Built To Last.
PHD2401
• Rugged gearbox construction
• Special alloy pinion gears and tapered
roller bearings on both sides of each
gear
• Shear pin driveline protection
Augers... the heart
of the digger
• Bush Hog® offers
both regular duty and
heavy duty augers in a
variety of sizes, from
6-inch to 24-inch
depending on the
model
• 2” Round hub
connection
• Replaceable drill teeth
• Heavy duty augers are
equipped with double
flighting for more
cutting surfaces and
faster, easier digging–
especially in heavier
soils
PHD2402
SPECIFICATIONS
Models
Auger Length
Auger Diameter
PHD2401
PHD2402
PHD2403
42” RD/48” HD
42” RD/48” HD
42” RD/48” HD
6 in., 9 in. or
12 in., Reg. Duty and
Heavy Duty
6 in., 9 in. or 12 in. Reg. Duty; 6 in., 9 in., 12 in.,
18 in. or 24 in. Heavy Duty
Auger RPM
180
170
135
Type Hitch
Cat. I and II
Cat. I and II
Cat. I and II
Input RPM
540
540
540
Gear Ratio
3.00:1
3.18:1
4.00:1
2 in. Diameter
2 in. Diameter
2 in. Diameter
Driveshaft
ASAE Cat. I
ASAE Cat. III
ASAE Cat. III
Hitch Yoke
2- 7/8 in. tubing
2- 7/8 in. tubing
3 in. tubing
Boom
2- 7/8 in. tubing
3- 1/2 in. tubing
3- 1/2 in. tubing with
reinforcing rib
Shear bolt
Shear bolt
Shear bolt
Output Shaft
Component Protection
Options (All Models)
Hydraulic Down Force Kit | Parking Stand | Auger Extensions
www.bushhog.com / 5
PHD SERIES
CONSTRUCTION
HYDRAULIC POST HOLE DIGGERS
•
Planetary Hydraulic drive features a high torque level to power the auger through the most
demanding conditions.
•
All augers are heavy industrial grade with 3/8" thick flighting. Sized in diameters from 6" to 36"
(depending on model), these are excellent for all soil conditions and solid rock.
•
The Farm and Ranch PHDHF Series features a selection of mounting brackets for skid steer loaders
and front end loaders.
•
The Commercial Grade PHDHC Series features mounting brackets for excavators, skid steer loaders,
backhoes and front end loaders.
•
All mounting brackets have a dual swivel feature that keeps the auger vertical while digging.
6 / www.bushhog.com
SPECIFICATIONS
Model
PHDHF15
PHDHF20
Drive Type
Shaft Output Size
PHDHF30
PHDHC20
PHDHC30
PHDHC35
Planetary With Reversible Motor
2" Hex
2" Hex
2" Hex
2" Hex
2" Hex
2" Hex
Maximum Output Torque*
1419 FT. LBS.
1777 FT. LBS.
2632 FT. LBS.
2008 ft. lbs
2937 ft. lbs.
3582 ft. lbs.
Recommended Hyd. Flow
6 to 15 GPM
10 TO 20 GPM
15 TO 30 GPM
10 to 20
15 to 30
20 to 35
3,000 PSI
3,000 PSI
3,000 PSI
3,000 PSI
3,000 PSI
3,000 PSI
Max. System Pressure
Drive Protection
Hydraulic Relief Valve
Hydraulic Hoses
1/2" x 8 ft. with 10 MB ends.
Type of Mounts
Loader Bucket, Skid Steer Universal, Euro
Loader Bucket, Skid Steer Universal,
Euro, backhoe
Max. Auger Diameter (Rock)
N/A
9"
12"
24"
36"
36"
Max. Auger Diameter (Dirt)
18"
30"
36"
30"
36"
36"
Standard Digging Depth
48"
48"
48"
48"
48"
48"
Warranty
2 Years Limited
5 Years Limited
*All values are theoretical. Specifications and models are subject to change without notice.
AVAILABLE AUGER TYPES
Note: Auger tips are available only in black. Shown in
yellow for visual effect only.
HRAD*
HSRA*
HSDA**
T-POST**
* Available only for C-Series posthole diggers
** Available for both C & F-Series posthole diggers
www.bushhog.com / 7
CONSTRUCTION
Built To Last.
75CBH, 85CBH, 95CBH
CONSTRUCTION
BACKHOES
BORN TO BE BRUTAL. – Bush Hog®’s brawny new line of backhoes all feature curved booms that provide
greater operator visibility, larger range of motion, easier trailering, and superior digging performance. They
are designed to deliver years of exceptional performance under tough and continuous working conditions.
Engineered for maximum strength and durability, Bush Hog® backhoes are constructed of high-grade steel
that delivers more powerful digging forces while requiring less maintenance. Yet, even though our backhoes
are built to be tough at the job site, they are designed to be easy on the operator. From comfortable seating
and spacious footrests, fluid movements and smooth operation, you’ll feel the Bush Hog® difference
immediately.
So whether you need a large backhoe for heavy farm, construction and field jobs, or a compact unit for
landscape or contracting work, you’ll get more value, more features and more performance with Bush Hog.
8 / www.bushhog.com
CONSTRUCTION
Built To Last.
The 85CBH fits compact and utility tractors from
30 to 75 PTO HP. With its 102” digging depth, the
85C is used for a wide range of jobs! The 85CBH
can provide more than 4,100 pounds of bucket
digging force and can be mounted on a sub-frame
or on 3-Point brackets.
The sleek lines of the 75CBH make it an
outstanding match for compact tractors ranging
from 25 to 45 PTO HP. With more than 2,800
pounds of bucket digging force and 90” dig depth,
the 75CBH is a lot more than just pretty lines!
It gets the job done quickly! The 75CBH can be
mounted on a sub-frame for quick installation and
removal or with 3-Point brackets, adding to its
versatility.
• Curved boom backhoes that match the sleek styling
and performance of today’s tractors.
• Fewer moves are required for trenching or
close-up work!
• Designed for Homeowner, Commercial Contractors,
and AG applications with outstanding performance!
• Easier to dig over obstructions!
• Available in three models with digging depths of 7.5’,
8.5’, and 9.5’.
• Available in a variety of colors to match your tractor!
• Heavy-duty cast stabilizer pads and bucket linkages
for great durability.
• Better productivity with a Quick-Mount Sub-Frame!
• Curved Boom provides greater visibility into the
digging area.
www.bushhog.com / 9
75CBH, 85CBH, 95CBH
CONSTRUCTION
BACKHOES
STABILIZER PADS— Bush Hog® Backhoes
feature cast reversible stabilizer pads to
fit most applications. Optional Rubber
“Street Pads” are available for use on
paved or concrete surfaces. “Bigfoot” Dirt
Pads are also available for added stability
in loose soil conditions.
MECHANICAL THUMB— Bush Hog®
75CBH, 85CBH, 95CBH Backhoes
have an optional mechanical
thumb. The fixed thumb allows the
operator to grasp items between
the bucket and the thumb using the
hydraulic control of the bucket.
SWING FRAME AND CYLINDERS— Bush Hog® 75CBH,
85CBH, and 95CBH Backhoes use two hydraulically
cushioned swing cylinders to provide 180° of swing with
plenty of power in both directions!
HEAVY DUTY BUCKETS— Every Backhoe
Bucket features replaceable teeth for aggressive digging and weld on wear strips for
outstanding wear protection and strength.
Buckets for the three models are available in
9”, 12”, 16”, 18”, 24” and 36” widths. Buckets
are interchangeable on all three models.
10 / www.bushhog.com
CONSTRUCTION
Built To Last.
BACKHOE SPECIFICATIONS
MODELS
75CBH
85CBH
95CBH
Tractor PTO HP
25-45
30-75
40-90
Digging Depth 2’ Flat Bottom (A)
90”
102”
114”
Max Reach to Bucket Tooth (B)
117.6”
135.1”
148.0”
Loading Height (C)
69.9”
80.0”
91.0”
Swing Arc (D)
180°
180°
180°
Transport Height (E)
77.3”
86.1”
95.6”
Transport Overhang (F)
45.4”
51.6”
55.4”
Bucket Rotation (G)
180°
180°
180°
Stabilizer Down (H)
90”
90”
90”
53.75”
53.75”
53.75”
Digging Force—Bucket
2827 lbs
4156 lbs
4159 lbs
Digging Force—Dipper
2022 lbs
2183 lbs
2667 lbs
System Pressure
2150 PSI
2500 PSI
2500 PSI
Shipping Weight (Less Bucket)
1014 lbs
1036 lbs
1100 lbs
Flow, Hydraulic, GPM
5-6 GPM
5-6 GPM
7-9 GPM
Stabilizer Up (I)
OPTIONS & EXTRA EQUIPMENT
9”, 12”, 16”, 18”, 24”, 36”
Heavy Duty Bucket
X
X
X
PTO Pump & Reservoir
X
X
X
Bigfoot Dirt Pads (12 in2)
X
X
X
Rubber Street Pads
X
X
X
Mechanical Thumb
X
X
X
Bush Hog® guarantees each piece of Bush
Hog® equipment against defective materials
and workmanship for a period of one year from
the date of delivery to the purchaser unless
otherwise specified.
Bush Hog® reserves the right to make changes
and/or improvements to product design and
construction of parts or machines shown
herein without notice or obligation.
The 95CBH Backhoe is designed for tractors from 40 to
90 PTO HP, and can be mounted on a sub-frame or 3-Point
brackets. The 95C has a 2’ Flat Bottom digging depth of
114”, allowing it to fill the needs of a wide range of backhoe
applications. With a bucket digging force of over 4,100
pounds, this is the Bush Hog backhoe you need to blast
through the biggest jobs!
®
www.bushhog.com / 11
PW SERIES
CONSTRUCTION
PRESSURE WASHERS
Clean up! Bush Hog ®’s new PW-series line of pressure washers is the ideal choice for making your
cleaning jobs a cinch. Equipped with commercial grade Honda engines, top-of-the-line CAT pumps
comprised of solid ceramic plungers and high pressure seals, five quick connect spray tips, and a 25' high
pressure rubber hose, these units are the perfect option for cleaning jobs at home or on location. The PW
models also come mounted on a durable welded steel frame. From top to bottom, the PW series pressure
washers are built Bush Hog® tough for years of reliable service!
12 / www.bushhog.com
CONSTRUCTION
Built To Last.
5 Quick-Connect Spray Tips
Honda GX Engine
•CAT Pump with Solid Ceramic Plungers
and High Pressure Seals
• Commercial-Grade Honda GX Engine
• Durable Steel Construction
•Heavy Duty Cart with Polymer Powder Coat
• 3-Year Limited Warranty
CAT Pump
PRESSURE WASHER SPECIFICATIONS
MODEL
PW 2750
PW 3200
PW 4000
2750
3200
4000
2.5
3.0
3.5
Engine
Honda GX160
Honda GX270
Honda GX390
Pump
CAT 4DNX
CAT 4SPX
CAT 67DX
PSI
GPM
Hose (High Pressure Rubber)
Dimensions (Assembled)
Weight
25'
50'
22"L x 34"D x 30.5"H
22"L x 34"D x 30.5"H
22"L x 34"D x 30.5"H
94 lbs.
133 lbs.
155 lbs.
www.bushhog.com / 13
GA & GAW SERIES
CONSTRUCTION
GAS COMBINATION UNITS
GENERATOR, AIR COMPRESSOR AND WELDER (CERTAIN MODELS)
Bush Hog ® recognizes how important it is to have the right tools to repair and maintain your high quality
equipment to ensure it stays in good working condition. Bush Hog®’s GA and GAW-series units offer the
convenience of multiple machines in a single compact platform. Powered by a high end Honda GX series
engine, the GA and GAW units come with a 5,000 max watt generator in combination with a two-stage air
compressor. The GAW-series models add the functionality of a 200A arc (stick) welder. These combination
units are ideal for use in commercial or industrial applications or on the farm. When dependability and
productivity matter, let the Bush Hog® GA and GAW combination units help you keep working.
14 / www.bushhog.com
CONSTRUCTION
Built To Last.
Welder
(GAW Models)
Outlets/Circuit Breaker
• T wo-Stage Cast Iron
Air Compressor With
Up to 30 Gallon Tanks
• 5,000 Watt Generator
•5
0–200 Amp DC Welder
Available in Certain Models
Pressure Gauge/Air Rail
GAS COMBINATION UNIT SPECIFICATIONS
MODEL
Components
Weight (Assembled)
GA 2110
GA 2130
GAW 3110
Generator / Air Compressor
GAW 3130
Generator / Air Compressor / Welder
450 lbs.
506 lbs.
485 lbs.
554 lbs.
49"
49"
49"
49"
Width
23"
23"
23"
23"
Height
28.5"
42"
28.5"
42"
Length
Engine
Honda GX390, Single Cylinder, Electric Start, Auto-Idle Throttle, Gas, 6.4-quart Tank
GENERATOR
Output (AC)
Type
120V / 240V
Brushless
Brushed
Watts
Outlets
6000 Surge/5000 Continuous
(2) 120V 20 Amp Duplex Outlets / (1) 120/240V 30 Amp Twistlock
AIR COMPRESSOR
Type
Reciprocating 2-Stage
CFM
Air Tank
14.3 @ 90 PSI / 13.7 @ 175 PSI
10-gallon (twin 5-gallon)
30-gallon
Air Rail
10-gallon (twin 5-gallon)
30-gallon
3/8" NPT - High Flow
WELDER
Amps
Duty Cycle
Material Thickness
Notes
50-200 Amp DC
Not Applicable
100%@150A / 65%@180A
16 Gauge to 1/2" Steel
12V Power Source for Starting Not Included
Welding Cables Not Included
www.bushhog.com / 15
SS, HS & HC SERIES
CONSTRUCTION
SKID STEER BUCKETS
Bush Hog ® offers a wide range of skid steer buckets to meet all of your material handling needs.
Built Bush Hog tough to give dependable service day after day, these skid steer buckets are ideal
for construction, landscape, and general farm use. From moving dirt to spreading gravel to hauling
manure, choose a model that matches your work and get the job done.
®
16 / www.bushhog.com
CONSTRUCTION
Built To Last.
SSBLS (Skid Steer Bucket,
Low Profile, Short Bottom)
• Solid tube design adds heavy duty strength
• Heavy duty quick attach plate
• Available with or without heavy duty weld-on
teeth
• 3/4-inch x 6-inch cutting edge
The SSBLS-model has a short bottom that adds to
the cutting edge breakout force needed for those
tough jobs. The SSBLS is designed as a heavy duty
general purpose bucket.
SSBLL (Skid Steer Bucket,
Low Profile, Long Bottom)
• Available with or without weld-on teeth
• 3/4-inch x 6-inch cutting edge
• Low profile long bottom design results in
maximum visibility
The SSBLL model combines heavy duty features
with good visibility from the operator’s seat.
Strength and visibility features of the SSBLL make
it the preferred choice of professionals for their
rubber tired machines.
www.bushhog.com / 17
SS, HS & HC SERIES
CONSTRUCTION
SKID STEER BUCKETS
HSSBLL ( Heavy Duty Skid Steer
Bucket, Low Profile,
Long Bottom)
• Available with or without bolt-on teeth
• Reinforced one piece quick attach plate
• 1/2-inch side gussets
• 1-inch x 8-inch high carbon cutting edge
The HSSBLL-model was designed for high horse
power track machines. It has the heavy duty
features that allow it to withstand the forces
generated by modern Skid Steer track machines,
with the same low profile long bottom feature as
the SSBLL-model allowing for good visibility.
HCSSB ( High Capacity, Heavy Duty,
Skid Steer Bucket)
• Heaviest Skid Steer bucket
• Available with or without heavy duty
bolt-on teeth
• High capacity
• 1-inch x 8-inch cutting edge and
3/4-inch x 6-inch side cutting edge
The high capacity HCSSB-model has all of the
heavy duty features of the HSSBLL. Its reinforced
high capacity design will provide years of service
with today’s largest Skid Steer machines.
Bush Hog® Skid Steer buckets are built Bush Hog® tough and will give dependable service day
after day. Choose a model that matches your work and desired width. See back page for a list
of specifications.
18 / www.bushhog.com
HCSSLB (High Capacity Skid Steer
Litter Bucket)
•
•
•
•
•
Designed to carry high volumes of material
3/4-inch x 6-inch bucket edge
The Quick Attach has heavy designed plates.
Max 80 HP for rubber track machines
Max 100 HP for rubber tire machines
The HCSSLB Litter bucket is designed for high
volumes, easy fill and easy clean out. Excellent for
use with litter, silage and bulk material.
SKID STEER BUCKET SPECIFICATIONS
Models
Overall Depth
Overall Height
Overall Width
Useable Depth
Useable Height
Useable Width
Roll Back Angle
Volume (Not
Heaped)
Weight
(With Teeth/
No Teeth)
Number of Teeth
SSBLS
28"
20 1/2"
5, 5 1/2, 6,
6 1/2 & 7'
22 1/2"
19 1/2"
59" (5')
65" (5 1/2')
71" (6')
77" (6 1/2')
83" (7')
20°
8.2'³ (5')
9'³ (5 1/2')
9.8'³ (6')
10.6'³ (6 1/2')
11.4'³ (7')
484/434 (5')
499/449 (5 1/2')
543/493 (6')
575/518 (6 1/2')
601/537 (7')
7 (5')
7 (5 1/2')
8 (6')
8 (6 1/2')
9 (7')
3/4" x 6"
Cutting Edge
Horse power
100 HP/80HP
(Rubber Tire/Track)
BL
Paint options
R & R* = Reversible and Replaceable
Powder coat paint options BL = BLACK
SSBLL
39 1/4"
20"
5, 5 1/2, 6,
6 1/2 & 7'
33 3/4"
19 1/16"
59" (5')
65" (5 1/2')
71" (6')
77" (6 1/2')
83" (7')
20°
12.25'³ (5')
14.00'³ (5 1/2')
15.25'³ (6')
16.50'³ (6 1/2')
17.75'³ (7')
545/507 (5')
576/527(5 1/2')
604/548 (6')
650/600 (6 1/2')
701/625 (7')
7 (5')
7 (5 1/2')
8 (6')
8 (6 1/2')
9 (7')
3/4" x 6"
HSSBLL
39 1/4"
20"
33 3/4"
19 1/16"
71" (6')
77" (6 1/2')
83" (7')
101" (8 1/2')
HCSSB
37 5/8"
25 7/8"
6, 6 1/2, 6 3/4
& 7 1/2'
31 5/8"
23 7/8"
69 1/2" (6')
73 1/2" (6 1/2')
78 5/8" (6 3/4')
86 5/8" (7 1/2')
20°
15.25'³ (6')
16.50'³ (6 1/2')
17.75'³ (7')
24.5'³ (8 1/2')
20°
18.75'³ (6')
19.75'³ (6 1/2')
21'³ (6 3/4')
23'³ (7 1/2')
743/686 (6')
771/716 (6 1/2')
811/748 (7')
960/884 (8 1/2')
775/720 (6')
811/755 (6 1/2')
830/775 (6 3/4')
900/870 (7 1/2')
8 (6')
8 (6 1/2')
9 (7')
9 (8 1/2')
8 (6')
8 (6 1/2')
9 (6 3/4')
9 (7 1/2')
1" x 8"
1" x 8"
3/4" x 6"
100 HP/80HP
120 HP/100 HP
120 HP/100 HP
100 HP/80HP
BL
BL
BL
BL
6, 6 1/2, 7 & 8 1/2'
HCSSLB
45 11/16"
26 5/8"
6, 6 1/2,
7, 8 & 9'
40 3/8"
25 1/16"
71" (6')
77" (6 1/2')
83" (7')
95" (8')
107" (9')
20°
25.75'³ (6')
28'³ (6 1/2')
30'³ (7')
34.32'³ (8')
38.61'³ (9')
662 (6')
679 (6 1/2')
742 (7')
800 (8')
895 (9')
N/A
www.bushhog.com / 19
CONSTRUCTION
Built To Last.
AG, BGR & BRGR SERIES
CONSTRUCTION
GRAPPLES
Bush Hog’s® AG, BGR, and BRGR-series grapples are built tough and help you make quick work of larger
jobs. The AG and BGR grapples use an open bottom design to move brush and debris, rake, and dig
without picking up dirt. The BRGR-series provides the operator with the grasp and hold abilities of a
grapple, along with the storage capacity of a conventional bucket. Each model is designed to mount onto
a universal skid steer mount. Let Bush Hog’s® grapples help you get a grip on your work.
20 / www.bushhog.com
CONSTRUCTION
Built To Last.
Brush Grapple Series (BRGR)
• Constructed of 1/2-inch top quality steel
• 3/8-inch solid quick attach plate
• 9-inch aggressive teeth
• Protected cylinders and hoses
• Extra wide opening for large capacity work
• Independent grapple arms for uneven loads
• Max. 100 HP for rubber tire machines
• Max. 80 HP for rubber track machines
•Fits all skid steers and tractors using the
universal skid steer quick attach system
BRUSH GRAPPLE SPECIFICATIONS
Model Number
BRGR72
BRGR84
Overall Depth
37 1/2"
37 1/2"
Overall Height
25 1/2"
25 1/2"
Overall Width
6'
7'
Useable Depth
28"
28"
46 1/2"
46 1/2"
71"
83"
13 degrees
13 degrees
702 lbs.
787 lbs.
8
10
Usable Open Height
Usable Width
(in side end plates)
Roll Back Angle
Weight
Number of Teeth
Attachment Method
Paint Color
Universal Skid Steer Quick Attach
Black
Black
www.bushhog.com / 21
AG, BGR & BRGR SERIES
CONSTRUCTION
GRAPPLES
Bucket Grapple Series (BGR)
• Constructed of 1/2-inch top quality steel
• 3/8-inch solid quick attach plate
• Protected cylinders and hoses
• Wide opening for large capacity work
• Independent grapple arm
• Solid bottom for materials
• Max. 100 HP for rubber tire machines
• Max. 80 HP for rubber track machines
•Fits all skid steers and tractors using the
universal skid steer quick attach system
BUCKET GRAPPLE SPECIFICATIONS
with teeth
without teeth
Model Number
BGR72T
BGR84T
BGR72
BGR84
Overall Depth
39 1/4"
39 1/4"
39 1/4"
39 1/4"
Overall Height
24"
24"
24"
24"
Overall Width
6'
7'
6'
7'
Useable Depth
33 3/4"
33 3/4"
33 3/4"
33 3/4"
Usable Open Height
45 1/2"
45 1/2"
45 1/2"
45 1/2"
71"
83"
71"
83"
20 degrees
20 degrees
20 degrees
20 degrees
907 lbs.
993 lbs.
827 lbs.
903 lbs.
8
9
Usable Width
(in side end plates)
Roll Back Angle
Weight
Number of Teeth
Attachment Method
Paint Color
22 / www.bushhog.com
Universal Skid Steer Quick Attach
Black
Black
Black
Black
CONSTRUCTION
Built To Last.
Ag Grapple Series (AG)
• Replaceable 5/8” plow points
• 27” opening
• Not for skid steer use
•Light weight and rugged design for today’s
compact tractors with a maximum of 40 h.p.
•Compatible with Skid Steer, John Deere, and
Euro Quick Attach Systems
AG GRAPPLE SPECIFICATIONS
Model Number
AGR60
AGR72
Overall Depth
25", closed
25", closed
Overall Height
37 3/4"
37 3/4"
Overall Width
5 FT.
6 FT.
Useable Depth
N/A
N/A
Usable Open Height
31"
31"
Usable Width
5 FT.
6 FT.
N/A
N/A
372 lbs
409 lbs
5
5
(in side end plates)
Roll Back Angle
Weight
Number of Teeth
Attachment Method
Universal Skid Steer Quick Attach,
Euro or John Deere
Maximum Tractor h.p.
Paint Color
40
R,G,O,B, BL, or Y
R,G,O,B, BL, or Y
R=Red, G= green, O= orange, B= blue, BL = black, Y = yellow
www.bushhog.com / 23
PF SERIES
CONSTRUCTION
PALLET FORKS
The PF series pallet forks can be used in a variety of applications, from around the farm to nurseries to
construction sites, the PF series forks will save you time and money. Quickly and conveniently convert
your tractor mounted or skid steer loader with a universal skid steer frame into a material handler and
expand the utilization of existing machines. With a lift capacity of 4,000 pounds, the PF seires pallet forks
will handle the lifting for you.
24 / www.bushhog.com
CONSTRUCTION
Built To Last.
PALLET FORK SPECIFICATIONS
Overall Height
41 3/8”
Overall Width
45 5/16”
Overall Depth
60 3/8”
Fork Size
Fork Length
Fork Adjustable Width
1 1/2” X 4”
48”
Up to 44 3/8”
Increments of 4”
Weight
Max. Capacity
Attachment Method
Color
308 lbs.
PF MODEL
• 48” Fork length
• 4,000 lbs. Capacity
• 1 ½” x 4” fork size
• Forks adjustable in 4” increments
•Step plate for easy access to cockpit
of skid steer
•Models are compatible with Skid Steer,
John Deere and Euro Quick Attach
Systems
4,000 lbs.
Universal Skid Steer Quick Attach,
Euro or John Deere
Black
www.bushhog.com / 25
CRB, CBX, RTC, CRG, CLR SERIES
COMPACT IMPLEMENTS
LANDSCAPE
REAR BLADES, BOX BLADES, TILLERS, ROAD GRADER, LANDSCAPE RAKES
Big performance for small tractors.
Bush Hog®’s compact tools are designed to do big things with small tractors up to 24 HP. All feature Bush Hog®’s
legendary rugged construction and performance features that’ll help you get the job done not just today or
tomorrow, but for many years to come.
26 / www.bushhog.com
Built To Last.
Compact Rear Blades
Available in major tractor colors!
CRB48
MODELS
Moldboard Widths
CRB60CRB72
48 inches
60 inches
72 inches
Approximate Weight
136 lbs
150 lbs
164 lbs
Maximum Tractor HP
24 PTO
24 PTO
24 PTO
ASAE Cat. I/QH
ASAE Cat. I/QH
ASAE Cat. I/QH
12 inches x 1/4 inches
12 inches x 1/4 inches
12 inches x 1/4 inches
3/8 x 3 inches
3/8 x 3 inches
3/8 x 3 inches
King Pin Diameter
1 1/4 inches
1 1/4 inches
1 1/4 inches
Angle Adjustment
15° & 30° Forward & Reverse
15° & 30° Forward & Reverse
15° & 30° Forward & Reverse
Type Hitch
Moldboard Height and Thickness
Moldboard Cutting Edge
1-year limited warranty
Warranty
Compact Box Blades
MODELS
CBX48
CBX60
MODEL
CRG48
Working Width
48 inches
60 inches
Hitch
238 lbs
Box Depth
12 inches
12 inches
Max. Tractor HP (PTO), 2WD/FWA
24/20
3/16 inches
3/16 inches
5/8 inches x 2 1/2 inches
5/8 inches x 2 1/2 inches
Side End Plate Thickness
Scarifier Size
Number of Scarifier Teeth
Type Hitch
Cutting Edge
Number of Cutting Edges
Working Width
48”
Weight (lbs.)
238
Side Panel Thickness
5 teeth
ASAE Cat. I/QH
Reversible
Reversible
Rear Beam Construction
2” x 2” x 11g
2 Blades, Bolt on
Skid Shoe Construction
1/4” x 2” x 38 1/8”, Replaceable
2 Blades, Bolt on
Reversible Cutting Edge
Front Main Beam Construction
Reversible Cutting Edge
3” x 3” x 3/16”
Scarifier Shanks
Maximum Tractor HP
24 PTO
24 PTO
Cutting Edges
Approximate Weight
248 lbs
258 lbs
Warranty
Warranty
3/16”
4 teeth
ASAE Cat. I/QH
N/A
Two 3/8” x 6” bolt-on, replaceable and reversible heat-treated blades
1-year limited warranty
1-year limited warranty
Compact Tillers
Compact Landscape Rakes
MODELS
RTC50G
MODELS
CLR48
CLR60
Total Width
53 inches
Working Width
48 inches
60 inches
ASAE Cat. I / QH
ASAE Cat. I / QH
Working Width
Number of Blades
Minimum Tractor HP
Type Hitch
Offset
Number of Flanges
Rotor Speed
Type of Blades
Power to Rotor Transmission
Depth of Cut
Driveline
Approximate Weight
Warranty
48 inches
Type Hitch
6 blades per flange
Maximum Tractor HP
24 PTO
24 PTO
15 PTO
Approximate Weight
126 lbs
143 lbs
Rake Pivot
18° and 36°
18° and 36°
Center Mount
Pivot King Pin
1 1/4 inches
1 1/4 inches
5
1 inch
ASAE Cat. I / QH
Tine Spacings
1 inch
253 RPM/540 PTO
Tine Size
1 inch
C-type
Warranty
1 inch
1-year limited warranty
Gear Drive
6 inches
Slip Clutch Standard
374 lbs
1-year limited warranty
www.bushhog.com / 27
LANDSCAPE
Compact Road Grader
REAR MOUNTED BLADES
LANDSCAPE
4’ TO 14’ RUGGED BLADES
We can help you out of a tough scrape!
If you need a tool for landscaping, snow removal, feed lot work, ditching, terracing, dam building, road
reconditioning, or general farm maintenance, a Bush Hog® Rear Mounted Blade is always the answer.
Bush Hog® offers models ranging from light duty to heavy duty in a variety of widths, all engineered and
built to provide years of service under demanding conditions at a very reasonable price. So if you find
yourself facing a tough scrape, turn to Bush Hog® for performance you can count on!
28 / www.bushhog.com
Built To Last.
Whether you’re a homeowner, farmer, landscaper, or contractor,
Bush Hog® has a blade for every job and every level of duty.
COMPACT REAR BLADE
(CRB)
Bush Hog’s compact rear blades are the ideal choice for
light duty landscaping, driveway maintenance, or snow
removal. These light duty blades are rated for use on
two-wheel drive tractors up to 24 PTO horsepower and
four-wheel drive tractors up to 15 PTO horsepower. The
moldboard may be reversed for backfilling and angled left
or right for use in a wide variety of applications. Tilting
of the blade is achieved by adjustment of the tractor’s
3-point hitch arms.
Available in 4, 5, and
6-foot operating widths.
35SERIES BLADE
Available in 4, 5, 6,
and 7-foot
operating widths.
50 SERIES BLADE
LANDSCAPE
Whether you are a budget-minded landscape contractor
considering a blade for your jobsite, or a homeowner
interested in landscaping or snow removal, the 35 Series
has what you’re looking for. These utility blades are
rated for use on two-wheel drive tractors up to 35 PTO
horsepower and four-wheel drive tractors up to 30 PTO
horsepower and feature tilt, angle, and offset adjustments
in both forward and reverse positions.
Available in 6 and
7-foot operating widths.
Ideal for jobsites, landscaping, and homeowners, the 50
Series is the preferred choice for those who need a 50 PTO
horsepower rated blade with the features and
capabilities of a much heavier unit. Rated for a maximum
of 50 HP 2WD or 40 HP 4WD, the 50 Series blades
feature tilt, angle, and offset adjustments in both forward
and reverse positions.
70 SERIES BLADE
The medium-duty 70 Series Blades are designed for
landscaping, road maintenance, and snow removal. These
blades feature a heavy duty mainframe and high-strength,
reinforced moldboards to ensure years of trouble-free
performance. The 70 Series Blades are rated for use on
two-wheel drive tractors up to 70 PTO horsepower and
four-wheel drive tractors up to 55 PTO horsepower. These
blades feature tilt, angle and offset adjustments in both
forward and reverse positions.
Available in 6, 7, and
8-foot
operating widths.
www.bushhog.com / 29
REAR MOUNTED BLADES
4' TO 14' RUGGED BLADES
91 SERIES BLADE
The rugged construction of the 91 Series Rear Blades make them ideal for a wide variety of
applications, ranging from general roadmaintenance to ditching and terracing jobs.
These blades are recommended for use on two-wheel drive tractors up to 90 PTO
horsepower and four-wheel drive tractors up to 70 PTO horsepower.
Available in 7
and 8-foot
operating widths.
The 91 Series blades feature a number of tilt, angle, and offset adjustments in both the
forward and reverse positions for the versatility to handle a variety of tough jobs.
100 & 160 SERIES BLADES
The 100 and 160 Series Rear Blades are the ideal choice
for heavy-duty grading chores around the farm such as road
construction,terracing, dam building, and cleaningout feed lots.
LANDSCAPE
These blades offer a choice of manual or hydraulic tilt, angle,
and offset adjustments. Moldboard can be reversed
100 Series
Available in 8 and
9-foot operating widths.
for backfilling. They are rated for use on a wide range of 2WD
and 4WD tractors, depending on blade width.
With their heavy-duty construction, the 100 & 160 Series
Blades are engineeredand built to meet
the most demanding conditions.
160 Series
Available in 8 and 10-foot
operating widths
141 & 181 SERIES BLADES
Let Bush Hog®’s new 141 and 181-Series Blades give you the strength and
durability to pave a new way. Perfect for road building and maintenance, snow
removal, terracing, backfilling, and grading, these blades can handle any scrape.
These new series of rear mounted blades are available in sizes ranging from 7-feet
all the way up to 10-feet and recommended for tractors from 110 HP up to 180 HP.
Standard features include 3-point ASAE Category II and Category III hitches with
Quick Hitch compatibility, 4-inch King Pin, 1/2-inch x 6-inch cutting edges, and a 19inch moldboard height. These blades also feature manual or hydraulic offset, angle,
and tilt adjustments. Other available options include heavy duty skid shoes, as well
as, heavily constructed end plates.
225 & 300 SERIES BLADES
The heavy-duty design and construction of the 225 and 300
Series make them ideal for the most rugged road maintenance
and grading jobs. The precision-formed moldboards are reinforced
to withstand the most demanding conditions and can be reversed
for backfilling. These top-of-the-line blades are rated for
use on higher horsepower tractors and feature standard
all-hydraulic controls for easeof operation. The 225 and 300
Series are readyfor heavy-duty action and give you the ability
and confidence to tackle the toughest jobs.
30 / www.bushhog.com
225 Series
Available in 8, 10
and 12-foot
operating widths.
300 Series (not shown).
Available in 12 and 14-foot
operating widths.
1 1/4-inch
Grade 8
3-Pt. Hitch
None
King Pin Diameter
Offset Adjustment
Skid Shoes
End Plates
Parking Stand
Hydraulics
All Specifications subject
Angle Adjustment
1 1/4-inch
Grade 8
15° up or
down
30
35
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
to change without notice.
12-inches
left or right
(manual
5 forward
5 forward
positions up to
positions
30°, 3 reverse
up to 30°,
positions up
3 reverse
to 15°
positions up
to 15°
15
Front Wheel Assist
Tilt Adjustment
24
15 7/8 x 1/4inch
1/2 x
6-inches
Reversible
3-Pt. Cat. I,
Cat. I Quick
Hitch
50
6 and 7-feet
70
6, 7, and
8-feet
18 x
5/16-inch
1/2 x
6-inches
Reversible
3-Pt. Cat. I
& II,
Quick Hitch
16 x
3/8-inch
1/2 x
6-inches
Reversible
3-Pt. Cat. I
& II,
Quick Hitch
91
7 and 8-feet
17 x
3/8-inch
1/2 x
6-inches
100
8 and 9-feet
141
1/2 x
6-inches
19-Inches
REAR BLADE SPECIFICATIONS
1 1/4-inch
Grade 8
30° up or
down
55
70
3-inches
70
90
3-inches
8-feet: 105
9-feet: 80
8-feet: 125
9-feet: 95
4-inches
110
141
4-inches
8-feet: 160
10-feet: 135
8-feet: 190
10-feet: 160
1409-lbs.
(8-ft.)
1529-lbs.
(10-ft.)
3-Pt. Cat. I
& II,
Quick Hitch
160
8 and
10-feet
18 x
1/2-inch
1/2 x
6-inches
www.bushhog.com / 31
LANDSCAPE
15° up or
15° up or
15° up or
15° up or
down (manual down (manual down (manual down (manual
or hydraulic) or hydraulic) or hydraulic) or hydraulic)
23-inches
18-inches left 30-inches left 30-inches left 37-inches left 37-inches left
left or right
or right
or right
or right
or right
or right
(manual)
(manual or hyd.) (manual or hyd.) (manual or hyd.) (manual or hyd.) (manual or hyd.)
45° left or
5 forward
5 forward
45° left
45° left or
45° left or
right (in
positions
positions
or right in
right (in
right (manual
up to 30°,
up to 45°,
forward
forward and or hydraulic) forward and
reverse posi3 reverse
5 reverse
position, 20° reverse position, manual
positions up positions up left or right in tion), manual
or hyd.)
to 15°
to 15°
rev. position
or hydraulic
(manual or
hydraulic
N/A
N/A
Optional
Optional
Optional
Optional
N/A
N/A
N/A
Optional
Optional
Optional
Standard
Standard
Standard
Standard
Standard
Standard
N/A
N/A
Optional
Optional
Optional
Optional
Note: 225 and 300 Series blades not warrantied for use on track-type tractors.
1 1/4-inch
Grade 8
15° up or
down
40
50
3-Pt. Cat. I
3-Pt. Cat. II,
& II,
III & Quick
Cat II Quick
Hitch
Hitch
(4-ft.) 403-lbs. (6-ft.) 510-lbs. (6-ft.) 703-lbs. (7-ft.) 942-lbs. (8-ft.)
(5-ft.) 430-lbs. (7-ft.) 538-lbs. (7-ft.) 740-lbs. (8-ft.) 975-lbs. (9-ft.)
(6-ft.)
572-lbs. (8-ft.)
(7-ft.)
35
4, 5, 6, and
7-feet
14.5 x 1/4inch
1/2 x
3-inches
Reversible
3-Pt. Cat. I
Cat. I Quick
Hitch
136-lbs. (4-ft.) 250-lbs.
150-lbs. (5-ft.) 280-lbs.
164-lbs. (6-ft.) 290-lbs.
325-lbs.
3-Pt. Cat. I
Cat. I Quick
Hitch
3/8 x
3-inches
CRB
4, 5, and
6-feet
12 x 1/4-inch
Max. Tractor HP
(PTO)
2-Wheel Drive
Approximate
Weight
Hitch
Moldboard Height
and Thickness
Moldboard
Cutting Edge
SERIES
Moldboard Width
4 1/2-inches
8-feet: 250,
10-feet: 225
12-feet: 160
8-feet: 225
10-feet: 200
12-feet: 160
2120-lbs.
(8-ft.)
2260-lbs.
(10-ft.)
2400-lbs.
(12-ft.)
3-Pt. Cat. II
& III,
Quick Hitch
225
8, 10, and
12-feet
20 x
1/2-inch
1/2 x
6-inches
12-feet: 300
DBHP
14-feet: 250
DBHP
5-inches
N/A
3463-lbs.
(12-ft.)
3603-lbs.
(14-ft.)
3-Pt. Cat. III
& IV,
Quick Hitch
300
12 and
14-feet
20 x
1/2-inch
1/2 x
6-inches
Optional
Optional
Standard
Optional
Optional
Optional
Standard
Standard
Optional
Optional
Standard
Standard
15° up or
15° up or
15° up or
down (manual
down
down
or hydraulic)
(hydraulic)
(hydraulic)
37-inches left 46-inches left 50-inches left
or right
or right
or right
(manual or hyd.) (hydraulic)
(hydraulic)
45° left or
45° left or
45° left or
right (in
right (in
right (manual
forward
or hydraulic) forward and
reverse posi- and reverse
tion, manual
position,
or hyd.)
hydraulic)
4-inches
140
180
3-Pt. Cat. II,
III & Quick
Hitch
1/2 x
6-inches
19-Inches
181
Built To Last.
BBX SERIES
LANDSCAPE
BOX BLADES
More tools to handle the landscaping chores of
homeowners and compact tractor owners…
Bush Hog® now offers a light-duty, full-size box blade line, along with a series of compact road graders that
expand the work capabilities of your small, compact and subcompact tractors. Bush Hog® is committed
to providing you more reasons to get out of the house and go to work. The dirt around your house or
workplace better look out… things are going to be moving!
32 / www.bushhog.com
LANDSCAPE
Built To Last.
LIGHT-DUTY BOX BLADE SPECIFICATIONS
Models
Working Width
Moldboard Height
Box Depth
BBX48
BBX60
BBX65
BBX72
48”
60"
65”
72”
15 /8”
22”
15 /8”
22”
15 /8”
22”
15 5/8”
22”
5
5
5
Overall Depth
27”
27”
27”
27”
Overall Height
33”
33”
33”
33”
Overall Width
49”
61”
67”
73”
Side Sheet Thickness
1
/4”
/4”
Scarifier Size
Number of Scarifier Teeth
1
4
1
5
5
6
2
2
375
390
Cat. 1 Std. and QH
Lower Hitch
Single lug
Cutting Edge (Reversible)
/8” x 6”
3
2
2
Max. HP Requirement 2 WD
40
Max. HP Requirement 4 WD
30
A-Frame
Bolt-on
Scarifier Box
Weight (pounds)
/4”
1
/8” x 2 /2”
5
Hitch
Number of Blades
/4”
1
4” x 4” x 1/4”
260
325
www.bushhog.com / 33
SBX & MBX SERIES
LANDSCAPE
BOX BLADES
Quality-Built Tools for Rugged Landscaping Chores
Bush Hog® landscape tools are built tough to handle tough jobs. Whether you’re a farmer, rancher,
professional landscaper or construction contractor, Bush Hog® has the right tool for the job. All offer
heavy-duty construction, with special features to make your job a little easier. And because they wear the
Bush Hog® brand, you can rely on them to provide years of trouble-free performance. Trust Bush Hog® to help
you get the job done right!
34 / www.bushhog.com
Built To Last.
SBX BOX BLADES
The Bush Hog® SBX Series Box Blades are exceptional tools when
the job requires grading, leveling or back filling. The scarifiers have
three adjustable height positions and replaceable heat-treated
tips for extended wear. Two 1/2 x 6-inch heat-treated, reversible
and replaceable cutting edges smooth even the roughest ground.
Rated for use on 2WD tractors up to 50 PTO horsepower and
4WD tractors up to 35 PTO horsepower, these box blades provide
excellent value for the price.
SPECIFICATIONS
MODEL
No. of
Width
Scarifiers
SBX48
48 in.
4
430 lbs.
SBX60
60 in.
5
490 lbs.
SBX65
65 in.
5
510 lbs.
SBX72
72 in.
6
550 lbs.
SBX78
78 in.
6
580 lbs.
SBX84
84 in.
6
610 lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
MBX BOX BLADES
Bush Hog’s MBX Series Medium Duty Box Blades are the ideal choice for use around the farm
or by landscape contractors on the jobsite. These box blades are rated for use on 2WD tractors
up to 65 PTO horsepower and 4WD tractors up to 55 PTO horsepower with a Cat. I or II 3-point
hitch. They feature a heavy duty A-frame, heat-treated scarifier shanks, and a swinging tailgate to
provide years of trouble-free performance. Whether you are grading driveways, cleaning out barns,
or leveling a construction jobsite, these medium duty box blades are sure to meet your needs.
SPECIFICATIONS
MODEL
No. of
WidthWeight
Scarifiers
MBX60
60 in.
5
580 lbs.
MBX72
72 in.
6
640 lbs.
MBX84
84 in.
6
710 lbs.
MBX96
96 in.
6
790 lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.bushhog.com / 35
LANDSCAPE
Weight
RO SERIES
ROLLOVER BOX BLADES
LANDSCAPE
With the ability to perform three different functions, Bush Hog’s Rollover Box Blade is one of the most versatile
implements for landscapers. In the first position the heat-treated reversible cutting edge is ideal for grading
the material. In the second position, backfilling can be easily accomplished. Finally, in the third position, heavy
duty scarifier shanks give you plenty of ripping ability when breaking up compacted ground. What makes
this tool more valuable is that all three positions can be changed from the tractor seat. These rollover box
blades are rated for use on 2WD tractors up to 60 PTO horsepower and 4WD tractors up to 45 PTO horsepower.
SPECIFICATIONS
MODEL
Width
Number of Scarifiers
Weight
RO-600
60 in.
5
630 lbs.
RO-650
65 in.
5
680 lbs.
RO-720
72 in.
6
710 lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
36 / www.bushhog.com
RG SERIES
Built To Last.
LANDSCAPE
ROAD GRADER
Potholes beware! Bush Hog®’s line of road graders smooth out your ride and return your dirt, gravel or
slag roads to like-new condition. Designed with two offset and angled scraper blades within a boxed
frame, these Bush Hog® road graders cut off material from the high spots in your road and deposit the
material in the low lying areas, thereby leveling the surface. Our RG series road graders are available
in 5’, 6’ and 7’ operating widths and are designed for use on tractors up to 50 horsepower. When you
encounter the toughest road conditions and even more material needs to be cut and moved to level
the surface, scarifier shanks with replaceable hardened tips are available on each road grader to rip the
soil up to depths of 2-3/8”. In addition to maintaining existing roads, these road graders can be used in
countless other applications such as road building, landscaping, building and maintaining baseball fields
and horse arenas, to name a few. Let Bush Hog®’s road graders level out your work areas!
www.bushhog.com / 37
RG SERIES
ROAD GRADER
Scarifiers can rip soil up to 2-3/8”
deep.
Dual, replaceable and reversible
½” x 6” cutting edges.
Full length, replaceable skids.
LANDSCAPE
ROAD GRADER SPECIFICATIONS
Model Number
RG60
Hitch
RG72
RG84
Cat. 1 Std and QH
Recommended HP, 2WD / (FWA)
50 / (40)
Working Width
60”
72”
84”
Weight (lbs.)
500
571
642
Side Panel Thickness
3/16”
Front Main Beam Construction
4” x 4” x 5/16” wall
Rear Beam Construction
2-1/2” x 2-1/2” x 3/16” wall
Skid Shoe Construction
3/8” x 2-1/2” x 46-3/4” long
Scarifier Shanks
Number of Scarifier Shanks
Cutting Edges
Key Product Specifications:
• Cat. 1 hitch, quick hitch compatible
• Strong tubular steel frame construction
• Offered in 5’, 6’ and 7’ working widths
• 13-3/4” side skirt depth for moving large
volumes of loose material
38 / www.bushhog.com
Three position shanks with dimpled-on hardened tips
4
6
6
Two 1/2” x 6” bolt-on, replaceable and
reversible heat-treated blades
• Three-position shanks with replaceable
hardened tips
• Dual, replaceable and reversible ½” x 6”
heat-treated cutting edges
• Full length, replaceable skids
• Available in tractor colors
HDRG SERIES
Built To Last.
LANDSCAPE
ROAD GRADER
The new Bush Hog® Heavy Duty Road Grader is available in 7-feet and 8-feet operating widths. The HDRG’s
heavy duty construction boasts a weight of up to 828-lbs., enabling it to tackle any grading job. The HDRG’s
design features all-welded construction, a max rating up to 90 HP, and two offset and angled scraper blades
that are vertically adjustable. The vertical blade adjustment system provides the user the ability to adjust
the cutting depth to compensate for blade wear and tear. Heat treated plow point scarifier shanks enable
the HDRG to rip through most any earthen surface when grading driveways, fire lanes, and maintaining/
building dirt or gravel roads.
www.bushhog.com / 39
HDRG SERIES
ROAD GRADER
LANDSCAPE
Four-position hardened
steel shanks
HDRG84 Shown
Key Product Specifications
• Category I, II Quick Hitch Compatible
• Four Position Adjustable Scarifier Shanks
• All Welded Steel Frame Construction
• Cutting Edge Height Adjustment
• D
ual Replaceable and Reversible
Heat-treated Cutting Edges
• Recommended for up to 90 HP
• Available in Tractor Colors
SPECIFICATIONS
Models
HDRG84
HDRG96
3-Pt. Cat I & II QH
3-Pt. Cat I & II QH
90 (2WD), 70 (4WD)
90 (2WD), 70 (4WD)
Working Width
84-inches
96-inches
Side Panel Thickness
3/16-inch
3/16-inch
Hitch
Recommended HP
Front Main Beam
4-inches x 4-inches x 3/8-inch
Rear Beam Construction
4-inches x 4-inches x 1/4-inch
Skid Shoe Construction
1/2-inch x 2 1/2-inches
Scarifier Shanks
Four Position Shanks with Hardened Tips
Number of Scarifier Shanks
6
Cutting Edges
40 / www.bushhog.com
8
1/2-inch x 6-inches Bolt on Replaceable & Reversible Heat Treated Blades
Built To Last.
LLR & MLR SERIES
LANDSCAPE RAKES
LANDSCAPE
Bush Hog®’s line of landscape rakes are the perfect tools for removing debris or giving an area that “groomed
look.” Perfect for jobs ranging from brush removal to grooming horse arenas, this tool is available in
both a light duty model for tractors up to 30 PTO HP and a medium duty model for tractors up to 50 PTO HP.
One-inch spacing between the heat-treated tines allows you to easily remove sticks, small rocks and other
unwanted material. An optional gauge wheel is available for both models and the medium duty model
offers a ratchet or hydraulic cylinder option to control angle adjustment. All units feature 360° pivot ability
with angle adjustment of the rake, and a king pin size of 1-1/4 inches. With a Category I hitch, and in sizes
from 60 to 96-inch widths, there is sure to be a Bush Hog® Landscape Rake to match your requirements.
SPECIFICATIONS
MODEL
Width Weight
LLR60
60 in. 205 lbs. MLR72
72 in. 325 lbs.
LLR72
72 in. 225 lbs. MLR84
84 in. 345 lbs.
LLR84
84 in. 245 lbs. MLR96
96 in. 365 lbs.
MODEL
Width
Weight
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.bushhog.com / 41
PVB & PVS SERIES
PULVERIZERS
LANDSCAPE
After the heavy material has been removed, a Bush Hog® Pulverizer becomes the perfect tool
to prepare a seedbed. The steel shanks break up compacted soil, while the heavy roller pulverizes
large clumps and prepares the area for seeding. This tool is ideal for the professional landscaper/
contractor who requires clean, level ground in one pass. Available in 60, 72 and 84 inch widths,
with one or two rollers and featuring a Category I hitch, there is sure to be a Bush Hog® Pulverizer
to match your requirements.
SPECIFICATIONS
MODEL
No. of
WidthWeight
Rollers
PVB-600
PVS-600
PVB-602
PVS-602
PVB-660
PVS-660
60 in.
1
530 lbs.
60 in.
2
640 lbs.
66 in.
1
560 lbs.
PVB-662
PVS-662
66 in.
2
680 lbs.
PVB-720
72 in.
1
590 lbs.
PVS-720
PVB-722
PVS-722
72 in.
2
720 lbs.
PVB-840
84 in.
1
650 lbs.
84 in.
2
790 lbs.
PVS-840
PVB-842
PVS-842
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
PVB = Bar Shanks
42 / www.bushhog.com
PVS = Spike Shanks
Built To Last.
PG & MPG SERIES
PLUGGERS
The Bush Hog® Pluggers are literally designed to get to “the root of the problem.” The 3/4-inch
spoons provide excellent soil penetration, allowing nutrients and air to reach the turf’s root system.
A 1-1/4 inch diameter shaft with greasable sleeves supports the independent hubs. The frame is
designed as a weight box so that additional weight may be added to increase down pressure when
the soil is heavily compacted. All models are rated for tractors up to 60 PTO HP with a Category I
three point hitch. Optional slicing knives are also available.
LANDSCAPE
You get consistent plugs up to 3/4inch to promote root growth.
SPECIFICATIONS
MODEL
Width Hubs
Weight
PG-600
60 in.
8
350 lbs.
PG-720
72 in.
10
390 lbs.
MPG-600
60 in.
10
460 lbs.
MPG-720
72 in.
12
500 lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
www.bushhog.com / 43
SD, SS & SP SERIES
SPEED SEEDERS
SPEED DRILL
LANDSCAPE
Designed with versatility in mind, the Speed Drill utilizes a
unique Seed Metering System that makes the Speed Drill
capable of handling a wide variety of seed types, all with the
same seed box.
USES
• Pasture Renovation
• Large Food Plots
• Row Crops
FEATURES
• 16” straight coulters slice the ground, followed by 14”
concave openers to form a seedbed trench.
• A 3-speed transmission and precise adjustment of the
seed metering slots allow a wide range of seed rates.
• The gear box is easily accessible for quick changes.
• A full row of heavy-duty cultipacker wheels follow up to
ensure premium seed-to-soil contact.
MODEL
SD72
SD96
DESCRIPTION
No-Till Drill; 3-Pt. Cat. I/II
No-Till Drill; 3-Pt. Cat. I/II
WIDTH
6’
8’
ROW SPACING
8”
8”
#OF ROWS
9
12
WEIGHT
1385 lbs.
1855 lbs.
HOPPER CAPACITY
4.4 Bushels
7.7 Bushels
SPEED SLICE
The Speed Slice offers precision seed placement and
optimum seed-to-soil contact, ensuring excellent germination in existing stands of grass or new turf applications. It is designed to allow you to easily vary the width
of the seed groove by adjusting the disc angle.
USES
• Pasture Overseeding
• Landscape of Sports Turf
• Golf Courses
• Waterways or Roadside Seeding
• New Construction
• Food Plots
• Mine Reclamation
FEATURES
• The close-spaced disc blades are on an adjustable
gang; adding angles to the blades works to break up
the existing root base.
• Solid stand planting for tighter germination.
MODEL
SS48
SS72
DESCRIPTION
Solid Stand Scatter; 3-Pt. Cat. I/II
Solid Stand Scatter; 3-Pt. Cat. I/II
44 / www.bushhog.com
WIDTH
4’
6’
DISC SPACING
4”
4”
WEIGHT
960 lbs.
1480 lbs.
HOPPER CAPACITY
2.5 Bushels
4.4 Bushels
Built To Last.
SPEED PLOTTER
LANDSCAPE
If you take your food plots
seriously, then you need serious
equipment. The Bush Hog® Speed
Plotter offers quality and value
in the most versatile implement
of its kind. You can use it as a
broadcast seeder for planting
grasses, or as a no-till drill for
planting row crops such as corn
or beans. And you can switch
between broadcast or drilling in a
matter of minutes!
FEATURES
• Plants virtually any seed
• Scatters seed grasses for tight
germination and a uniform
stand.
• Drills row crop seeds such as
corn or beans.
• All of the ground-engaging
components are rolling—No
shanks to drag trash.
MODEL
DESCRIPTION
WIDTH
ROW SPACING
#OF ROWS
WEIGHT
HOPPER CAPACITY
SP48P
Food Plot Machine; ATV Pull Type
4’
10”
4
740 lbs.
2.5 Bushels
SP48L
Food Plot Machine; 3-Pt. Cat. I/II
4’
10”
4
660 lbs.
2.5 Bushels
SP72L
Food Plot Machine; 3-Pt. Cat. I/II
6’
8”
9
1040 lbs.
4.4 Bushels
www.bushhog.com / 45
FSP SERIES
LANDSCAPE
SPREADER
The Bush Hog® three point hitch fertilizer spreaders have bottom opening gates for accurate flow rates.
Variable gate position openings and fine adjustments ensure material drops on different positions of
the spinning disc. This produces a center, right and left pattern. The polyethylene hopper offers long
lasting protection from the deteriorating effects of fertilizer. For further resistance to deterioration, the
distribution fins are electroplated and the paint is powder coat for hardness and durability. The FSP
models can also be used to distribute seeds. The FSP-500 has a weight capacity of 500 lbs, and the FSP800 has a weight capacity of 800 lbs.
46 / www.bushhog.com
SS, LP, 1RCV SERIES
Built To Last.
COMPACT IMPLEMENTS
3-POINT SUBSOILER, LAYOFF PLOW & CULTIVATOR
SS1 3-PT Standard Duty Subsoiler
The new 3-point standard duty subsoiler from Bush Hog® is
the right tool for you when breaking up a hardpan developed
over years of use. This subsoiler is available with a single
shank equipped with a replaceable tip capable of ripping
the soil a depth of 19 inches. The beveled edge of the
high carbon steel shank, combined with a heat-treated
replaceable plow point, allows you to cut through the soil
with minimal ground disturbance; shear pin protection is
provided. The SS1 is designed for 25-45 HP tractors with
Cat I Standard and Quick Hitch.
TILLAGE
LP Layoff Plow
Once a field has been broken and disked, the Bush Hog®
LP Layoff Plow is used to make rows where crops
are planted. The LP has a single, wide prong with a
replaceable tip used to lay off and create a bed where
you can plant your crops. After the rows are made, the
planting can begin. In addition, the Bush Hog® LP Layoff
Plow can be used for digging root type vegetables such
as potatoes. The layoff plow is designed for 25-45 HP
tractors with Cat I Standard and Quick Hitch.
www.bushhog.com / 47
SS, LP, 1RCV SERIES
COMPACT IMPLEMENTS
3-POINT SUBSOILER, LAYOFF PLOW & CULTIVATOR
1RVC Cultivator
The Bush Hog® 1RVC Cultivator is ideal for
aerating, stirring and pulverizing the soil to
remove weeds, prepare the ground before
planting, or loosen the soil after the crop has
begun to grow. The 1RVC has 6 shanks with
replaceable tips and is designed for 25-45 HP
tractors with Cat I Standard and Quick Hitch.
The 1RVC has mounting holes in place for
seed planters made by Covington® or Cole.
This feature allows for reduced trips over the
field and makes the implement even more
valuable to you.
COMPACT IMPLEMENTS SPECIFICATIONS
Model
SS1
LP
1RCV
Subsoiler
Layoff Plow
Cultivator
Cat. I Standard and
Quick Hitch
Cat. I Standard and Quick Hitch
Cat. I Standard and Quick Hitch
Overall width
32 3/8”
32 3/8”
57 7/8”
Overall height
50”
38”
41 3/16”
25-45
25-45
25-45
113
75
171
3/4” x 6”
3/4” x 4”
3/8” x 1 3/4”
1
1
6
1/2” x 2 1/2” x 12”
16” x 4.75mm
1/4” x 2 1/2” x 11
Description
Hitch
TILLAGE
Engine Horsepower
Weight (lbs.)
Shank size
Number of Shanks
Cutting Point
AVAILABLE IN MAJOR TRACTOR COLORS
48 / www.bushhog.com
RT SERIES
Built To Last.
ROTARY TILLERS
CHOICE OF 2 SERIES TILLERS, GEAR OR CHAIN DRIVEN.
RTH ROTARY TILLER
FEATURES:
Rugged construction
Heavy-duty gearboxes
Direct gear drive
Replaceable skids
Shielded drivelines
RTH SERIES ROTARY TILLERS
80 and 88-inch tilling widths
for 60-80 PTO HP tractors
59, 70 1/2, and 82 1/2-inch tilling widths
for 25-65 PTO HP tractors
RTG ROTARY TILLER
FEATURES:
Rugged construction
Heavy-duty gearboxes
Direct gear drive
Replaceable skids
Shielded drivelines
•
•
•
•
•
TILLAGE
RTG SERIES ROTARY TILLERS
•
•
•
•
•
www.bushhog.com / 49
RT SERIES
ROTARY TILLERS
CHOICE OF 2 SERIES TILLERS, GEAR OR CHAIN DRIVEN.
Gear drive with oil bath
in side gearbox is more
durable than a chain
drive that will wear and
could break.
RT60GR
Rotary Tiller, 60-inches Model,
Gear Drive, Reverse Till
SPECIFICATIONS
SERIES
RTHRTG
Tilling Width
80 and 88 inches
Tractor PTO HP
Requirements
60 – 80
Hitch
Category l & ll, 3-Point
Blades
TILLAGE
36, 40, 44
Rotor Speed
213 RPM/540 PTO
Power to Rotor
Transmission
Category I & II, Standard & Quick Hitch
42, 54, 66
211 RPM/540 PTO
Gear Drive Single Speed
# of Flanges on Rotor
9, 10, 11
7, 9, 11
12” Fixed Offset on 60” Model
*Depth of Cut
Driveline Protection
Weight Range
* May require additional passes depending upon soil type
50 / www.bushhog.com
25 – 65
C-Type
Number of Blades
Offset Capability
59, 70 1/2, 82 1/2-inches
Adjustable to 7” maximum with skid shoe
Slip Clutch
884 to 964 lbs.
673 to 831-lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Built To Last.
D SERIES
LIFT DISC HARROWS
3 MODELS FROM 60 TO 118” WIDTH
2D Series
3D Series
TILLAGE
1D Series
www.bushhog.com / 51
D SERIES
LIFT DISC HARROWS
3 MODELS FROM 60 TO 118” WIDTH
Bearing hangers reinforced
with gussets
Easy-to-grasp handle for
simple gang adjustment
Key Product Specifications:
Notched discs for maximum
cutting action
• 9” front gangs/7 1/2” rear gangs–the best of both worlds
•Square and rectangle tube steel frames and gang tubes
• Self-aligning, sealed ball bearings
• Adjustable gang angles, front and rear, using an easy-to-grasp
handle
•Notched disc blades for maximum cutting action
• Cat 1 standard and quick hitch on the 1D and 2D series, along
with Cat 1 and 2 standard and quick hitch on the 3D series
• Variable Blade Spacings Available:
• 9” front and rear gangs for tough-to-cut “New Ground”
• 7 1/2” front and rear gangs for finer soil finishing
•1” square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8” square, high carbon steel gang axle used on
the 3D series
• Available in tractor colors
• Optional disc scrapers
TILLAGE
LIFT DISC HARROW SPECIFICATIONS
Description
Drawbar horsepower requirement
Hitch type
Max. cultivation width
Approx weight load on each
blade
Disc blade sizes Notched
Disc blade spacing
Disc bearing type
Number of bearings
Forward gang angle adjustment
Rear gang angle adjustment
Mainframe front tube construction
Gang arm construction
Gang axles
Disc scrappers
52 / www.bushhog.com
1D60
1D78
35 hp
60”
35-38
2D78
2D96
3D96
65 hp
78’
30-32
Cat. 1 Std and QH
78”
96”
39-43
39-41
3D118
95 hp
96”
53-59
118”
52-57
16” OR 18”
18” OR 20”
20” OR 22”
9” Front, 7 1/2” Rear or 9” Front/Rear or 7 1/2” Front/Rear
Self-aligning, sealed ball bearings
2 PER GANG
Front Gangs – 0, 7, 14, 21 degrees
Rear Gangs – 7, 14, 21 degrees
2” square tubing
3” x 1 1/2” tubing
1” square, high carbon steel
Optional
1 1/8” square, high carbon steel
DHP SERIES
Built To Last.
PULL DISC HARROWS
Bush Hog®’s new Pull Disc Harrows, the DHP Series, are designed for pulverizing soil, seed bed preparation and general tillage.
Solid built units available in widths of 8’, 10’ and 12’, the DHP line of disc harrows are ideally suited for use by small farmers,
food plot managers, ranchers, construction crews and nursery operators.
The DHP Series units share many features available on larger, more expensive models, including front-to-rear leveling, a
depth control system, adjustable-gang angles, and streamlined tubular gang hangers.
Multiple blade spacing options are available with your DHP Series Pull Disc harrows. Blade spacings of 7-1/2” allow for fine,
finish discing needed for seedbed preparation or 9 inches for breaking up and fracturing “new ground” or a combination of
the two. Six multiple blade spacing options for each model are available with your DHP Series Pull Disc Harrows; 20” or 22”
notched discs at each of following spacing options: 7.5” front & rear, 9” front & rear, 9” front and 7.5” rear. High strength
1-1/8” square gang axles, combined with tough gang components, and triple lip sealed ball bearings, ensure the DHP models
are ready for the toughest jobs. Put a Bush Hog® DHP disc harrow to work for you today.
www.bushhog.com / 53
TILLAGE
8, 10 AND 12’ WIDTHS
DHP SERIES
PULL DISC HARROWS
8, 10 AND 12’ WIDTHS
PULL DISC HARROWS SPECIFICATIONS
Model
Drawbar horsepower requirement
DHP8
DHP10
DHP12
40-65 hp
45-100 hp
55-100 hp
Hitch type
Approximate transport width
Max. cultivation width
Mainframe width
Approx weight load on each blade (lbs.)
Pull-type w/clevis & hole for 1 1/4” pin
8’-10”
10’-10”
12’-4”
8’-6”
10”- 6”
12’
60”
93 1/2”
93 1/2”
95-114
84-98
78-90
Disc blade sizes and types
20” or 22” Notched
Disc blade spacing
7.5” or 9” or a combination of both
Disc bearing type
Number of bearings
Triple lip sealed ball bearings
8
12
Forward gang angle adjustment
15, 16.5, 18, 19.5, 21 Degrees
Rear gang angle adjustment
12, 13.5, 15, 16.5, 18 Degrees
Hitch frame construction
4” x 4” x 1/4” tubing
Slide mainframe construction
4” x 3” x 1/4” tubing
Mainframe front & rear tube construction
5” x 3” x 1/4” tubing
Mainframe middle tube construction
4” x 3” x 1/4” tubing
Gang arm construction
4” x 3” x 1/4” tubing
Gang axles
Front to rear leveling system
Depth control
Hydraulic cylinder
Transport tires and wheels
Parking jack
TILLAGE
Options
54 / www.bushhog.com
1 1/8” Square, High Carbon Steel
Manual crank adjustment
Cylinder stroke control spacers
3- 1/2” x 8” ASAE hydraulic cylinder
Two 9.5L x 15 tires on 15” x 6” - 5 bolt wheels
Standard
Disc Scrapers, Center Sweep Kit, Dual Wheel Transport Kit
12
APP SERIES
Built To Last.
ALL PURPOSE PLOW
3, 5, 7 AND 9-SHANK MODELS
A simple tool to do serious work…
field cultivators break up, cultivate and aerate the ground in agricultural fields, food plots, gardens or
anywhere you need to get something growing. Spring loaded, auto-reset shanks allow you to go where
other tools cannot… stumps, rocks and other obstacles will not keep you from breaking up “new” ground
or reclaiming “old” ground. With 3, 5, 7 and 9-shank models available, Bush Hog® has an All Purpose Plow
to meet your ground breaking needs.
www.bushhog.com / 55
TILLAGE
Bush Hog’s new line of All Purpose Plows help you tackle a wide range of ground breaking tasks. These
APP SERIES
ALL PURPOSE PLOW
3, 5, 7 AND 9-SHANK MODELS
Spring loaded, auto-reset shanks protect
the implement when obstacles such as
rocks, stumps or roots are encountered
in rough ground.
Heat treated shanks with replaceable
points; points are 1080 high carbon
steel hardened to 38-44 Rockwell C.
Easily adjustable shank spacing in 1”
increments; heavy gauge 2 1/2” x 2 1/2”
x 3/8” angle iron frame.
SPECIFICATIONS
Models
APP48-3
APP60-5
APP66-5
APP66-7
APP85-7
APP85-9
5
49 /8”
5
61 /8”
5
67 /8”
5
67 /8”
5
85 /8”
85 5/8”
44”
56”
62”
62”
80”
80”
Overall Depth
39 3/4”
39 3/4”
39 3/4”
39 3/4”
39 3/4”
39 3/4”
Overall Height
40 3/8”
40 3/8”
40 3/8”
40 3/8”
40 3/8”
40 3/8”
Weight (lbs)
206
228
284
367
386
455
# of Shanks
3
5
5
7
7
9
Over All Width
Maximum Working Width
Angle Iron Size (width x height x thickness)
2 /2” x 2 1/2” x 3/8”
1
Hole Spacing
1”
TILLAGE
Hitch
Teeth
Suggested Min. PTO HP
56 / www.bushhog.com
Cat. 1 Std and QH
/16” x 2” x 10 /8” 1080 HIGH CARBON 38-44 ROCKWELL C REVERSIBLE
5
1
24
35
35
49
49
63
HDSS SERIES
Built To Last.
HEAVY DUTY SUBSOILERS
1 OR 2 SHANK MODELS
The new 3-point heavy duty subsoilers from Bush Hog® are the right tool for you when breaking up a hardpan
developed over years of heavy use. Compacted soil can hurt you in two ways: plant roots cannot penetrate into
both effects weaken your plants and reduce your yields. The new HDSS model subsoilers from Bush Hog® are
available in four configurations, single or double shank with either short or long shank, capable of ripping the soil
to depths ranging from 19 inches to 23 inches depending on the shank length. In certain areas, these subsoilers
can be used to install water lines at depths suitable to get below the frost line. The beveled edge of the high
carbon steel shank, combined with a heat-treated replaceable plow point, allow you to cut through the soil with
minimal ground disturbance; shear pin protection is provided. When you need to go deep…the Bush Hog® HDSS
subsoilers get the job done for you. Nothing beats a Bush Hog®!
www.bushhog.com / 57
TILLAGE
the lower levels of the soil to tap additional nutrients and, in wet conditions, the excess water cannot drain away…
HDSS SERIES
HEAVY DUTY SUBSOILERS
1 OR 2 SHANK MODELS
HEAVY DUTY SUBSOILERS SPECIFICATIONS
Model
Description
HDSS1S
HDSS1L
HDSS2S
HDSS2L
Subsoiler Heavy Duty
1 Shank Short
Subsoiler Heavy Duty
1 Shank Long
Subsoiler Heavy Duty
2 Shank Short
Subsoiler Heavy Duty
2 Shank Long
Hitch
Cat. 1/2 Quick Hitch
Overall width
Overall height
41”
39 1/2”
Max Depth
43 1/2”
261
Number of Shanks
Cutting Point
TILLAGE
43 1/2”
23”
Approximately 35 hp per shank up to 85 hp
276
Shank size
Replaceable Heat-Treated
Cutting Tip
Available in Major Tractor Colors
58 / www.bushhog.com
39 1/2”
19”
Horsepower
Weight
49”
420
450
1 1/4” x 9 7/16” x 26 1/8”
1
2
1” x 2 1/2” x 9 3/8”, Replaceable, Bolted On
Beveled Shanks Promote
Easier Ground Penetration
Parking Stands are Standard
PA SERIES
Built To Last.
PASTURE AERATORS
The PA series pasture aerators from Bush Hog® are designed for use anywhere soil compaction exists.
Available in eight foot or ten foot models, the PA series units are equipped with twisted shanks that
nutrients and creates improved soil growing conditions. The PA series aerators are ideal for a wide range
of potential users including hay producers, cattlemen, sod farmers and landscapers. Give the PA series
aerators a chance to make a difference in your soil's potential today!
www.bushhog.com / 59
TILLAGE
serve both to lift and fracture compacted soil. This dual action design improves the intake of water and
PA SERIES
PASTURE AERATORS
SPECIFICATIONS
MODEL
PA8
PA10
Tractor Horsepower Requirements
40 to 90 HP
Working Width
86"
116"
Overall Width
97.38"
127.63"
Overall Length
136" in transportation position
Overall Height (with tines on the ground)
44.25"
Weight (lbs) [approximate]
Max. Ballast in Weight Box (lbs)
**(Weight Box Included)**
(Weights/Ballast NOT included)
Number of Tines
Tine Material
1950
2500
2200-lbs.
2900-lbs.
24 LH & 24 RH
32 LH & 32 RH
Forged & heat treated through steel
Tine Hub Spacing
7.5"
Tine Penetration
Up to 8.125" depending on ground condition
Frame Construction
4" square tubing; all welded construction
Main Tongue Beam
4" square
Rotor/Tine Support Hangers
1" x 7" heavy duty hangers
Rotor Bearings
Heavy duty greaseable bearings
Rotor Bearing Protection
.38" x 3.5" metal housing
Rotor Angle Adjustment
2.5°, 5°, 7.5°
Tires & Wheels
9.5L x 15 tires on 15" - 5 bolt wheels
Tine Depth Control
Add cylinder donuts to cylinder rod (included)
Hydraulic Cylinder
3.5" x 8"
Transportation Lock
Manual cylinder lock
Rear Axle Pivot
* Safety Tow Chain Included
Greaseable
TILLAGE
* Available in major tractor colors
Angled rotor adjustment from 2.5° to 7.5°
allows the user to achieve even more soil
fracturing as the gangs are offset
60 / www.bushhog.com
Heavy duty bearing hangers support the
twisted shank rotors
Built-in weight box to ensure maximum
soil penetration (weights not included)
Nothing beats a
Made
BUSH
HOG
in Selma Alabama
2501 Griffin Ave.
Selma, Alabama 36703
Tel: (800) 363-6096
Fax: (334) 874-2701
bushhog.com
Bush Hog and
(hog icon) are registered trademarks of Alamo Group, Inc. Copyright © 2015
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising