Grindmaster | Front of House Stainless Steel Iced Tea Dispenser | Operator Manual | Grindmaster Front of House Stainless Steel Iced Tea Dispenser Operator Manual

Grindmaster Front of House Stainless Steel Iced Tea Dispenser Operator Manual
Operator Manual
Stainless Steel Iced Tea Urns
Models GTD2 and GTD3
Model GTD3-C
Model GTD3-FOT
Model GTD2-DNT-ST
Table of Contents
Specifications...........................2
Safety Information..................2
Installation...............................3
Cleaning & Maintenance ........3
Parts Diagrams and List ..........4
Thank you for purchasing this quality tea dispenser. For your safety and the safety of others, read all
warnings and the operator’s manual before installing or using the product. Properly instruct all operators.
Keep training records.
GMCW
4003 Collins Lane, Louisville, KY 40245 USA
Phone: 502.425.4776 Toll Free: 800.695.4500
Fax: 502.425.4664
Web: gmcw.com Email: info@gmcw.com
©2015 GMCW
Printed in China
GMCW provides the industry’s BEST
warranty. Visit gmcw.com for warranty
terms and conditions.
0515 Form # AW-357-01
Part # 390-00034
Specifications
Model
Description
Part No.
GTD3-DNT
GTD3-FOT
GTD3-TP
GTD3-RP
GTD3-C
GTD3-DNT-ST
GTD3-DNT-SBS
GTD2-DNT-ST
Tomlinson® down-facing
Tomlinson® front
Tomlinson® front w/ pinch tube
Rapak® front w/ pinch tube
Crathco® design
Stackable Tomlinson® down-facing
Side-by-side Tomlinson® down-facing
Stackable Tomlinson® down-facing
6700-20001
6700-30000
6700-30001
6700-30002
6700-40000
6700-50000
6700-50001
6700-50002
Depth
In
14.9
14.9
14.9
14.9
14.9
17.0
22.2
17.0
Height
In
22.1
21.6
21.6
21.6
22.1
12.7
14.1
10.0
Tank
US Gal.
3
3
3
3
3
3
3
2
Model GTD3-FOT
GTD3-TP
GTD3-RP
Model GTD3-DNT
Width
In
6.2
6.2
6.2
6.2
6.2
6.2
4.2
6.2
Model GTD3-C
Model GTD3-DNT-ST
Model GTD3-DNT-SBS
Model GTD2-DNT-ST
GMCW provides the industry’s BEST warranty. Visit our website at GMCW.com for warranty terms and
conditions.
Safety Information
Important Safety Information
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
For your safety and the safety of others, read all warnings and the operator’s manual before installing or using
the product.
DANGER: This term warns the user of imminent hazard that will result in serious injury or death.
WARNING: This term refers to a potential hazard or unsafe practice, which could result in serious injury or death.
CAUTION: This term refers to a potential hazard or unsafe practice, which could result in minor or moderate
injury.
NOTICE: This term refers to information that needs special attention or must be fully understood.
2
Grindmaster®
Stainless Steel Iced Tea Urns
Safety Information (continued)
CAUTION
Burn hazard. Water used for brewing tea is very hot. Use caution when brewing, pouring, or transporting hot
tea. Never attempt to move the urn without first draining or allowing contents to cool.
Clean and sanitize your iced tea urn daily.
Do not keep brewed tea or other brewed beverages overnight.
Installation
Operation
Set-up
CAUTION: Burn hazard. Water used for brewing
tea is very hot. Use caution when brewing, pouring, or
transporting hot tea. Never attempt to move the urn
without first draining or allowing contents to cool.
1. Carefully open and unpack the iced tea
urn.
2. Inspect for damaged parts.
3. Clean and sanitize the urn before
operation. See Cleaning Instructions.
1. Verify the urn is clean and properly
sanitized.
4. Place on a flat, level surface.
2. Be sure the faucet is placed in the “OFF”
position.
Assembly
Crathco valves (Model GTD3-C):
1. Install the handle into the slot opening in
the front of the urn and drop in valve from
the top with gasket preinstalled.
3. Carefully fill the urn. Do not overfill.
Maximum fill is to the indented line near
the top (approx. 1 inch below the top).
4. Place lid onto top of urn.
Other valve types:
Cleaning & Maintenance
1. Slide wing nut onto the valve seat and
install the C-ring.
CAUTION: Burn hazard. Water used for brewing
tea is very hot. Use caution when brewing, pouring, or
transporting hot tea. Never attempt to move the urn
without first draining or allowing contents to cool.
2. For pinch tube style valves:
a. Install pinch tube and pull until it is
fully seated inside of the urn.
b. Pull the valve handle to the fully open
and locked position; then slide it over
the pinch tube until it is seated on the
valve seat.
3. With the valve seated onto the valve seat,
and at the correct vertical displacement,
tighten the wing nut until the valve is
firmly seated.
4. For pinch tube style valves, move the valve
handle to the closed position.
If you need help, call GMCW Technical Service
Department, (502) 425-4776 or (800) 695-4500 (USA &
Canada only) (Monday through Friday 8 AM - 6 PM
EST). Please have the model ready so that accurate
information can be given.
Prior authorization must be obtained from GMCW for
all warranty claims.
Stainless Steel Iced Tea Urns
NOTICE: Never use chlorine based cleaners such as
bleach to clean stainless steel. Do not use scouring
cleaners on the urn’s surfaces.
Disassembly
1. Empty the entire contents of the iced tea
urn.
2. For Crathco valve types (Model GTD3-C),
pull out valve and then remove handle.
3. For valve types with pinch tubes, open the
dispense valve by moving the dispense
lever to the fully open and locked position.
4. For valve types except Crathco:
a. Detach faucet retaining nut from
faucet
by
turning
the
nut
counterclockwise.
b. Remove faucet from tube by pulling
away from valve seat.
c. Disassemble faucet by turning the
handle locking nut counterclockwise.
5. For valve types with pinch tubes, reach
inside the urn and remove dispense tube by
grasping the dispense tube handle and
pulling outwards.
Grindmaster®
3
Cleaning & Maintenance (continued)
Cleaning Instructions
Frequency: Clean and sanitize your iced tea urn daily.
Maintenance
1. Inspect urn parts before each use.
1. Place urn body, lid, dispense tube, and
faucet halves into a warm soapy wash.
2. Do not use a damaged urn
2. Clean all components by brushing or
scrubbing.
4. Use only factory authorized repair parts.
3. Replace damaged or worn parts.
3. Rinse carefully to remove soap.
4. Place the parts into the sanitizing solution.
5. Follow the sanitization procedure of your
chosen sanitizing solution. Be sure to soak
the parts for at least ten minutes.
6. Remove parts from sanitizing solution and
air dry.
Parts Diagrams and List
Model -DNT
Model -C
Model -FOT
-TP
-RP
Item No.
1
Part No.
280-00052
280-00053
280-00054
280-00055
99464
Description
Tomlinson 600T3G - For 6700-20001, 6700-50000, 6700-50001, 6700-50002
Tomlinson SPBA - for 6700-30000
Tomlinson 600T3P - for 6700-30001
Rapak Valve - for 6700-30002
Dispense Valve, w/ 99380 Seal - for 6700-40000
2
3
4
280-00052
280-00052
280-00052
280-00052
280-00052
280-00052
280-00052
200-00522
Valve Retaining C-Ring
Tomlinson Wingnut
Lid, Stackable - for 6700-50000, 6700-50002
Lid, Side-by-Side - for 6700-50001
Lid, Dine Urn - for 6700-20001, 6700-30000, 6700-30001, 6700-30002, 6700-40000
Tea Urn Pinch Tube - for 6700-20001, 6700-50000, 6700-50001, 6700-50002
Tea Urn Pinch Tube - for 6700-30001, 6700-30002
Push Handle
5
6
GMCW
4003 Collins Lane, Louisville, KY 40245 USA
Phone: 502.425.4776 Toll Free: 800.695.4500
Fax: 502.425.4664
Web: gmcw.com Email: info@gmcw.com
©2015 GMCW
Printed in China
0515 Form # AW-357-01
Part # 390-00034
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising