Sub-Zero | 400 Series Wine Storage | Design Guide | Sub-Zero 400 Series Wine Storage Design Guide

Sub-Zero 400 Series Wine Storage Design Guide
Wine Storage
65
BUILT-IN
subzero.com/specs
Wine Storage. Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to
ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helps
make a wine collection an element of beauty in the home.
3
27"
2
(686)
15 1/8"
237/8"
241/4"
(384)
80"
(606)
(616)
(2032)
34 1/16"
34"
(865)
(864)
8
80"
8
(2032)
84"
(2134)
343/163"
(868)
424G
424FSG
427G
427RG
WS-30
INTEGRATED
315W
30"
(762)
27"
(686)
PRO 48
WINE STORAGE MODELS
KEY FEATURES
• Integrated, overlay, flush inset and stainless steel
design options.
• Two independent storage zones maintain temperature,
humidity and UV protection.
• Full-view glass door standard on all models.
• Roller-assembly wine shelves with natural cherrywood
facing have three-quarter extension for easy access.
• Discreet interior lighting with illuminated display shelf
for prized bottles of wine.
• Wine shelves accommodate 750 ml bottles, halfbottles and magnums.
WINE STORAGE
• Freestanding model 424FSG does not require panels or
surrounding cabinetry.
UNDERCOUNTER
BUILT-IN
Wine Storage
66
Overall Dimensions
UNDERCOUNTER WINE STORAGE
PRO 48
15 1/8" (384)
24" (610)
23 7/8" (606)
341/16"
34"
(865)
(864)
4" (102)
4" (102)
INTEGRATED
24" (610)
16 5/8"
(422)
25 3/8"
(645)
1 3/4" (44)
UNDERCOUNTER
WINE STORAGE
1 3/4" (44)
MODEL 315W
MODEL 424G
Refer to page 83 for door clearance information.
Refer to page 83 for door clearance information.
Overall dimensions are based on stainless steel panels
and handles.
Wine Storage
67
BUILT-IN
subzero.com/specs
Overall Dimensions
FULL-SIZE WINE STORAGE
27" (686)
24" (610)
27" (686)
14" (356)
24" (610)
14" (356)
13/16"
(21)
PRO 48
13/16"
(21)
78 9/16"
78 9/16"
(1995)
(1995)
80"
80"
(2032)
OPENING
HEIGHT
(2032)
OPENING
HEIGHT
3/8"
(10)
1/2"
(13)
13 1/4"
(337)
INTEGRATED
10 1/4"
34 1/2"
(876)
(260)
20 3/8"
(518)
8 15/16"
9 3/4"
(227)
(248)
4"
HEIGHT DIMENSIONS ± 1/2" (13)
4"
HEIGHT DIMENSIONS ± 1/2" (13)
(102)
24"
(610)
4 5/8"
4 5/8"
(117)
(117)
251/2"
191/2"
251/2"
(648)
(495)
(648)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODEL 427G
MODEL 427RG
Overall dimensions do not include panels or handles.
UNDERCOUNTER
WITH REFRIGERATOR DRAWERS
WINE STORAGE
24"
(610)
(102)
BUILT-IN
Wine Storage
68
Overall Dimensions
Capacity and Weight
FULL-SIZE WINE STORAGE
Storage Capacity
26 3/16" (665)
PRO 48
30" (762)
84"
(2134)
73 3/4"
4" (102)
INTEGRATED
23 7/8" (606)
23 7/8"
(606)
17"
WINE STORAGE
(432)
311/4"
(796)
2 3/8" (60)
UNDERCOUNTER
MODEL WS-30
Overall dimensions are based on the stainless steel model.
For flush inset applications, add 1/2" (13) to door clearance
dimensions.
Bottles (750 ml)
R cu ft (L)
26
424G
46
427G
132
427RG
78
WS-30
147
5.3 (150)
Shipping Weight
lbs (kg)
315W
118 (54)
424G
(1873)
HEIGHT DIMENSIONS ± 1/2" (13)
315W
195 (88)
424FSG
220 (100)
427G
395 (179)
427RG
410 (186)
WS-30
445 (202)
Wine Storage
69
BUILT-IN
subzero.com/specs
Opening Dimensions
UNDERCOUNTER WINE STORAGE
FULL-SIZE WINE STORAGE
TOP VIEW
TOP VIEW
24" (610)
OPENING DEPTH
341/2" (876)
A
OPENING
HEIGHT
OPENING WIDTH
SIDE VIEW
FRONT VIEW
80" (2032)
OPENING
HEIGHT
27" (686)
OPENING WIDTH
INTEGRATED
25" (635)
OPENING DEPTH
PRO 48
25" (635)
OPENING
DEPTH
24" (610)
OPENING
DEPTH
MODELS 315W AND 424G
Opening Width
A
315W
15 1/4" (387)
424G
24" (610)
FRONT VIEW
WINE STORAGE
SIDE VIEW
MODELS 427G AND 427RG
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design
may necessitate moving the unit back or cabinets forward to
achieve a flush fit. This will require a minimum rough opening
depth of 25" (635).
UNDERCOUNTER
BUILT-IN
Wine Storage
70
Opening Dimensions
FULL-SIZE WINE STORAGE
TOP VIEW
24" (610)
OPENING
DEPTH
If two units are installed side by side, refer to pages 30–31 for
dual standard installations.
PRO 48
INTEGRATED
WINE STORAGE
24" (610)
OPENING DEPTH
SIDE VIEW
UNDERCOUNTER
MODEL WS-30
83 3/4"
(2127)
OPENING
HEIGHT
IMPORTANT NOTE: If an 83" (2108) grille height is specified,
the opening height must be decreased by 7/8" (22). If an 88"
(2235) grille height is specified, the opening height increases
by 4" (102).
29 1/2" (746)
OPENING WIDTH
FRONT VIEW
Wine Storage
71
BUILT-IN
subzero.com/specs
Planning Information
ELECTRICAL REQUIREMENTS
Electrical Requirements
The electrical supply should be located within the shaded
area shown in the illustration for your specific model.
For model 315W, the electrical supply can be located
anywhere on the back wall of the opening. Follow the
National Electrical Code and local codes and ordinances
when installing the receptacle. A separate circuit, servicing
only this appliance, is required. A ground fault circuit
interrupter (GFCI) is not recommended and may cause
interruption of operation.
Power Supply
Circuit Breaker
3-prong grounding-type
FRONT VIEW
7"
(178)
6"
75 1/2"
(1918)
FROM
FLOOR
15 1/2"
13" (330)
(394)
4 1/2"
(114)
3" (76)
FRONT VIEW
1/4"
(6)
FLOOR
FRONT VIEW
Models 427G and 427RG.
WINE STORAGE
Model 424G.
INTEGRATED
21/2"
(64)
2" (51)
E
(152)
Model WS-30.
LEFT SIDE
OF OPENING
LEFT SIDE
OF OPENING
15 amp
Receptacle
PRO 48
If you will be connecting the unit to a home security
system, you must allow a minimum of 36" (914) of the
system’s wiring to be routed in the electrical area designated for your model.
115 V AC, 60 Hz
UNDERCOUNTER
BUILT-IN
PRO 48
INTEGRATED
Wine Storage
72
Overlay Panels
Door Clearance
MODELS 315W AND 424G
MODELS 315W AND 424G
For models 315W and 424G, the overlay door panel will
affix directly to the door with screws through a series of
predrilled holes.
Models 315W and 424G can be installed flush with surrounding cabinetry. Depending on the thickness of the
overlay door panel, it may be necessary to install the unit
so that it extends 1/4" (6) beyond the front surface of surrounding cabinetry. This will prevent interference between
the door panel and adjacent cabinetry up to a 145° door
opening. Refer to the full-scale template on page 83.
Do not install a solid panel on the glass door unit. This
may cause moisture to form behind the panel. For model
424G, a solid door is available as a sales accessory and
must be installed if a solid door panel is being specified.
Service may be required to install the door. Contact your
authorized Sub-Zero dealer for more information. For solid
door dimensions, refer to the overall glass door panel
dimensions. Refer to the charts for panel specifications.
IMPORTANT NOTE: The width of stiles and rails can be
increased but should not exceed cabinet manufacturers’
standard widths or the overall panel dimensions. The back
sides of stiles and rails that will be visible through the
glass door will need to be finished along with the inside
edges of the frame.
Overlay Panels
PANEL DIMENSIONS
315W
424G
W
H
15" (381)
23 3/4" (603)
30 1/16" (764)
30 1/16" (764)
Panel Requirements
UNDERCOUNTER
WINE STORAGE
MIN WIDTH
Stiles / Rails
2 1/4" (57)
MAX PANEL WEIGHT
Door Frame (315W)
Door Frame (424G)
10 lbs (5 kg)
10 lbs (5 kg)
MIN PANEL THICKNESS
Overlay Panels
5/8"
(16)
Freestanding Model 424FSG
Model 424FSG does not require any panels or surrounding
cabinetry. It has a finished stainless steel exterior that is
designed to be used in a freestanding application.
Wine Storage
73
BUILT-IN
subzero.com/specs
Integrated Panels
MODELS 427G AND 427RG
Integrated Panels
For models 427G and 427RG, the integrated door panel
will affix directly to the door with screws through a series
of predrilled holes. Drawer panels for model 427RG will be
applied using the integrated mounting brackets.
427G
W
H
Door
26 3/4" (679)
75 7/8" (1927)
Door
Top Drawer
Bottom Drawer
W
H
26 3/4" (679)
26 3/4" (679)
26 3/4" (679)
45 3/8" (1153)
13 9/16" (345)
16 11/16" (424)
PRO 48
Do not install a solid panel on the glass door unit. This
may cause moisture to form behind the panel. A solid door
is available as a sales accessory and must be installed if
a solid door panel is being specified. Service may be
required to install the door. Contact your authorized
Sub-Zero dealer for more information. For solid door
dimensions, refer to the overall glass door panel dimensions. Refer to the charts for panel specifications.
427RG
Panel Requirements
MIN WIDTH
Stiles
Top Rail
Bottom Rail (427G)
Bottom Rail (427RG)
2 1/4" (57)
3 3/4" (95)
8" (203)
3" (76)
MAX PANEL WEIGHT
The height of the door panel can extend beyond the
typical panel height, provided you do not exceed the panel
weight limit. The toe kick clearance can vary with the
height of the panel. Refer to specifications on page 59.
IMPORTANT NOTE: The width of stiles and rails can be
increased but should not exceed cabinet manufacturers’
standard widths or the overall panel dimensions. The back
sides of stiles and rails that will be visible through the
glass door will need to be finished along with the inside
edges of the frame.
An optional lock kit is available for models 427G and
427RG. Review the lock kit instructions to ensure your
panels will allow for adequate installation. These instructions are available on our website, subzero.com/specs.
20 lbs (9 kg)
12 lbs (5 kg)
MIN PANEL THICKNESS
All Panels
5/8"
(16)
DUAL INSTALLATIONS
For information on dual installations for models 427G and
427RG, refer to integrated dual installations on page 61.
WINE STORAGE
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design
may necessitate moving the unit back or cabinets forward
to achieve a flush fit.
Door Frame
Drawer Panel (427RG)
INTEGRATED
Panel dimensions listed in the chart, assume the models
finish off at 80" (2032) in overall height and a 4" (102) toe
kick for model 427G.
UNDERCOUNTER
BUILT-IN
Wine Storage
74
Model WS-30
PRO 48
FRAMED PANEL
FRAMED PANEL SPECIFICATIONS
If the thickness of the framed panel is less than 1/4" (6), it
must be backed up with a sheet of shim material to build
the total thickness to 1/4" (6). If the panel is thicker than
1/4" (6), a routed edge must be provided around the panel
to ensure a proper fit. Refer to the illustration below.
A
A
A
H
Routing, recessing or an extended handle may be required
on raised panels for finger clearance under the handle.
IMPORTANT NOTE: Do not cover the glass door with a
solid panel. The window cut-out edges of the framed
panel will need to be finished, as they will be exposed.
A
W
Framed Panel Requirements
WS-30 Framed
INTEGRATED
MODEL WS-30
Max Panel Weight
Min Panel Thickness
ROUT TO
1/4" (6)
WINE STORAGE
DOOR
Door Panel
MAIN FRAME
DOOR
FRAME
GLASS
Raised framed panel.
W
H
29 3/4" (756)
69 9/16" (1767)
A
Stiles / Rails
TRIM
REVEAL
1/4" (6) min
UNDERCOUNTER
75 lbs (34 kg)
1/4" (6)
3 1/8" (79)
Wine Storage
75
BUILT-IN
subzero.com/specs
Model WS-30
OVERLAY PANEL
OVERLAY PANEL SPECIFICATIONS
Overlay model WS-30 can be used in an overlay or flush
inset application. The specific application will affect panel
sizes, opening dimensions and the installation.
H
A
A
A
IMPORTANT NOTE: Do not cover the glass door with a
solid panel. The window cut-out edges of the overlay,
spacer and backer panels will need to be finished, as they
will be exposed.
Overlay Panel Requirements
MODEL WS-30
75 lbs (34 kg)
5/8" (16)
A
W
WS-30 Overlay
DOOR
Overlay Panel
Spacer Panel
Backer Panel
W
H
30" (762)
29 1/8" (740)
29 3/4" (756)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
A
3 1/4" (83)
Stiles / Rails
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
W
H
30" (762)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Grille panel dimensions listed are for a standard 84" (2134)
overall height of the unit. For an 83" (2108) overall height,
subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Do not exceed overlay panel dimensions, as this could
cause damage to panels and the Sub-Zero unit.
OVERLAY
PANEL
SPACER PANEL
WINE STORAGE
Max Panel Weight
Min Panel Thickness
H
INTEGRATED
The overlay design allows the decorative panel to cover
the door trim for a more seamless appearance. The most
common way to achieve this look is to work with three
panels—the decorative overlay panel, which is typically
3/4" (19), a .10" (3) spacer panel and a 1/4" (6) backer panel.
Depending on your cabinet manufacturer, this could be
one panel routed for different dimensions. The illustrations
below will give you a better idea of the panel construction
and how it interacts with our frame. The size of the overlay
panel is critical, it must fit over the door frame.
PRO 48
Overlay model WS-30 will be shipped without handle
hardware and with an overlay panel grille as standard
equipment. Along with the door panel, you will need to
provide a panel for the grille and hardware to complement
your surrounding cabinetry.
SPACER
PANEL
CUSTOM PANEL
BACKER PANEL
BACKER
PANEL
TRIM
DOOR FRAME
3/4"
(19)
typical
.10" (3) 1/4" (6)
Panel assembly cross section. Panel assembly rear view.
UNDERCOUNTER
5/16" (8) min
1/8"
(3)
GLASS
BUILT-IN
Wine Storage
76
Model WS-30
FLUSH INSET PANEL SPECIFICATIONS
INTEGRATED
PRO 48
FLUSH INSET PANEL
Overlay model WS-30 used in a flush inset application
allows the decorative panel to cover the door trim for a
seamless appearance. The most common way to achieve
this look is to work with three panels—the decorative flush
inset panel, which is typically 3/4" (19), a .10" (3) spacer
panel and a 1/4" (6) backer panel. Depending on your
cabinet manufacturer, this could be one panel routed for
different dimensions. The illustrations below will give you a
better idea of the panel construction and how it interacts
with our frame. The size of the flush inset panel is critical,
it must fit over the door frame.
IMPORTANT NOTE: Do not cover the glass door with a
solid panel. The inside edges of the rough opening as well
as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be
exposed when the doors are open. The window cut-out
edges of the overlay, spacer and backer panels will also
need to be finished.
IMPORTANT NOTE: For flush inset panels thicker than
3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.
MODEL WS-30
WINE STORAGE
A
A
A
H
A
W
WS-30 Flush Inset
DOOR
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
31" (787)
29 1/8" (740)
29 3/4" (756)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
A
3 3/4" (95)
Stiles / Rails
Flush Inset Panel Requirements
Max Panel Weight
Min Panel Thickness
75 lbs (34 kg)
5/8" (16)
FLUSH INSET
PANEL
SPACER PANEL
SPACER
PANEL
FLUSH INSET PANEL
BACKER PANEL
BACKER
PANEL
TRIM
5/16" (8) min
UNDERCOUNTER
H
9/16"
(14)
Panel assembly cross
section.
3/4"
(19)
typical
.10" (3) 1/4" (6)
Panel assembly rear view.
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
31" (787)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Grille panel dimensions listed are for a standard 84" (2134)
overall height of the unit. For an 83" (2108) overall height,
subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Do not exceed flush inset panel dimensions, as this
could cause damage to panels and the Sub-Zero unit.
Wine Storage
77
BUILT-IN
subzero.com/specs
Model WS-30
DUAL INSTALLATIONS
Illustrations A–D provide panel offsets and reveals for
model WS-30 in a flush inset application. Refer to the
chart below for reference to the illustrations.
When two models WS-30 or a model WS-30 and built-in
unit are installed side by side, a dual installation kit may
be required. Contact your authorized Sub-Zero dealer for
the proper components and installation instructions. For
questions relative to the installation, call Sub-Zero at
800-222-7820. For local dealer information, visit the find a
showroom section of our website, subzero.com.
Panel Offsets
Illus.
MODEL WS-30
Door / Grille Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
A
B
C
D
TOP VIEW
CABINETRY
DOOR / DRAWER / GRILLE
1/2" (13)
1/8"
5/16" (3)
(8)
CABINETRY
GRILLE
FLUSH INSET PANEL
5/16" (8)
1/2"
(13)
5/8"
(16)
SIDE VIEW
Illus. A
Illus. B
DUAL STANDARD INSTALLATIONS
Two framed, overlay or stainless steel units may be placed
side by side in a dual installation. Some dual standard
installations will require a dual installation kit, available
through your authorized Sub-Zero dealer.
A custom filler strip can be used in between two units in a
framed, overlay or stainless steel design application. It is
recommended that the filler strip be at least 2" (51) wide,
to prevent condensation between the units. Be sure to add
the filler strip width to your rough opening width.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in
illustration A below. The dual installations shown in illustrations B and C require a filler strip.
IMPORTANT NOTE: For the application shown in illustration A, a dual installation accessory kit is required.
5/16"
(8) 5/32"
(4)
WITHOUT FILLER STRIP
DOOR
FILLER STRIP REQUIRED
FILLER STRIP REQUIRED
5/16"
(8)
1/2" (13)
WINE STORAGE
DOOR /
DRAWER
GRILLE
INTEGRATED
BACKER
SPACER
PRO 48
FLUSH INSET PANEL
3/32"
5/16" (2)
(8)
SIDE VIEW
SIDE VIEW
Illus. C
Illus. D
3/32"
(2)
Illus. A
W
Illus. C
UNDERCOUNTER
S
Illus. B
BUILT-IN
Wine Storage
78
Model WS-30
PRO 48
DUAL FLUSH INSET INSTALLATIONS
DUAL FLUSH INSET PANEL SPECIFICATIONS
Installing two models WS-30 or a model WS-30 and
built-in unit side by side in a flush inset application will
require adjustments to the dimensions of your finished
rough opening, panel sizes and panel offsets. It will also
require a dual installation kit, available through your
authorized Sub-Zero dealer.
INTEGRATED
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in
illustration A below. The dual installations shown in illustrations B and C require a filler strip. Illustration A is the
only application that will accommodate the dual wide
grille.
IMPORTANT NOTE: The application shown in illustration A
can only be achieved by installing dual flush inset panels.
Failure to install dual flush inset panels will cause the
handle side of the panels to collide when closing. In this
application a dual installation accessory kit is also
required.
Dual flush inset panels and dual installation kits are
available through your authorized Sub-Zero dealer. Refer
to the illustration and chart for dual flush inset panel
specifications.
FILLER STRIP REQUIRED
FILLER STRIP REQUIRED
WINE STORAGE
WITHOUT FILLER STRIP
UNDERCOUNTER
Illus. A
Illus. B
Illus. C
H
A
A
A
H
A
W
WS-30 Dual Flush Inset
DOOR
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
30 1/2" (775)
29 1/8" (740)
29 3/4" (756)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
A
3 3/4" (95)
Stiles / Rails
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
30 1/2" (775)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Grille panel dimensions listed are for a standard 84" (2134)
overall height of the unit. For an 83" (2108) overall height,
subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Wine Storage
79
BUILT-IN
subzero.com/specs
Model WS-30
DUAL FLUSH INSET PANELS
TOP VIEW
TOP VIEW
IMPORTANT NOTE: If a filler strip is not used, dual installations can only be accomplished using two units with
opposite hinges.
DUAL
TRIM
DOOR
BACKER
SPACER
FLUSH INSET PANEL
5/16" (8)
1/2"
(13)
5/16" (8)
1/8" (3)
5/8"
(16)
1/4" (6)
REVEAL
Illus. A
Illus. B
CABINETRY
1/2" (13)
GRILLE
1/8"
5/16" (3)
(8)
GRILLE
1/2" (13)
DOOR
Do not exceed the flush inset decorative panel
dimensions. Exceeding dimensions could cause
damage to the panels and the Sub-Zero unit.
SIDE VIEW
Illus. C
3/32"
5/16" (2)
(8)
SIDE VIEW
S
Illus. D
Illus.
DOOR /
DRAWER
MODEL WS-30
A
B
C
D
E
S
5/16"
(8)
SIDE VIEW
WINE STORAGE
Doors (hinge) / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
5/16"
(8) 5/32"
(4)
INTEGRATED
Illustrations A–E provide panel offsets and reveals for
model WS-30 in a flush inset application. Refer to the
chart below for reference to the illustrations. All reveals
are 1/2" (13) unless otherwise specified.
Panel Offsets
DOOR
CABINETRY
PRO 48
When installing two models WS-30 or a model WS-30
and built-in unit side by side in a flush inset application,
you must decrease the width of the decorative flush inset
panels by 1/2" (13). Adjustments to the panel offsets will
also need to be made. These adjustments are needed to
achieve a proper fit and to ensure the panels do not
collide when closing. Panel dimensions in the chart below
have been adjusted to reflect the decrease in panel
dimensions.
DOOR / DRAWER / GRILLE
3/32"
(2)
Illus. E
UNDERCOUNTER
5
BUILT-IN
Wine Storage
80
Side Panels
Handle Hardware
MODEL WS-30
For overlay and integrated models, handle hardware must
be provided. Optional stainless steel tubular and pro
handles are available through your authorized Sub-Zero
dealer.
PRO 48
When planning for side panels with the installation of the
model WS-30, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact
panel you are using, the height of the panel may vary.
IMPORTANT NOTE: The use of side panels may change
the width of your rough opening.
When installing a model WS-30 with a custom side panel,
an accessory kit is required. Stainless steel side panels
are also available through your authorized Sub-Zero dealer.
INTEGRATED
The side panel will need to be a minimum of 24" (610) deep
and 1/2" (13) thick. Refer to the illustrations below for side
panel dimensions. Routing will be necessary so that the
side panel fits flush against the side of the unit.
24" (610)
FRONT
OF SIDE
PANEL
1" (25)
1 7/8" (48)
1/8" (3)
ROUT TO 1/8" (3)
1/2" (13)
WINE STORAGE
1 7/8"(48)
84"
1" (25)
(2134)
Routing detail.
4" (102)
UNDERCOUNTER
MAIN
FRAME
OPTIONAL
TOE KICK
CUT-OUT
2 5/8"
(67)
Side panel dimensions.
SIDE PANEL
ROUTING
The door frame has numerous mounting holes on each
side to accommodate handle hardware. Using the predrilled holes to attach the handle will provide the best
alignment and strength.
IMPORTANT NOTE: Refer to the full-scale template at the
end of this section for a profile of the door frame and
position of the glass. Do not drill through the glass.
Wine Storage
81
Accessories
Door Frame Profile
These optional accessories are available through your
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
FULL-SCALE TEMPLATE
BUILT-IN
subzero.com/specs
The full-scale template below shows an example of the
door frame profile for wine storage models and the relationship to the overlay panel (stiles and rails).
Dimension
• Stainless steel tubular and pro handles to match the
style of Wolf ovens and ranges.
424G and 315W
427G and 427RG
WS-30
A
1" (25)
7/8"
15/16"
PRO 48
• Stainless steel front panel with tubular or pro handle for
models 427G and 427RG.
(22)
(24)
• Grille for an 83" (2108) or 88" (2235) finished height for
model WS-30.
• Side panel in stainless steel or white enamel and
stainless steel kickplate for model WS-30.
• Dual installation kit.
GLASS
• UL approved door lock.
• 90° door stop for model WS-30.
• Harness kit for Star-K compliance.
INTEGRATED
• Full-length standard or extended framed handle for
model WS-30.
PANEL
PROFILE
CL
STANDARD HANDLES
Standard Handles
Length
Stud Spacing
24 3/16" (614)
21" (533)
16 1/4" (413)
19 11/16" (500)
41 3/16" (1046)
39 9/16" (1006)
33 1/4" (845)
38 5/16" (973)
63 7/8" (1622)
45 3/16" (1147)
43 7/8" (1114)
43 7/8" (1114)
A
2 1/4" (57) RAIL / STILE
315W, 424G, 424FSG, 427RG DRAWERS
Tubular Handle
Pro Handle
A
DOOR FRAME PROFILE
WINE STORAGE
Refer to the chart below for standard handle lengths and
the stud spacing of tubular and pro handles used on wine
storage models.
MODEL 424G SHOWN
427G AND 427RG DOOR
Tubular Handle
Pro Handle
WS-30
Tubular Handle
Pro Handle
UNDERCOUNTER
BUILT-IN
Wine Storage
82
PRO 48
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
Dimension
For each model, the wine storage shelves have a natural
cherrywood facing. You can replace these strips with
wood more complementary to your design and surrounding cabinetry. Refer to the full-scale template below.
315W
424G and 424FSG
427G and 427RG
WS-30
A
10 15/16" (278)
19 1/2" (495)
20 15/15" (532)
24 9/16" (624)
Dimensions will vary for model 315W. Refer to specifications
on our website, subzero.com.
To remove the cherry strips, take the shelves out and
remove the screws. Reverse the procedure to affix the
new wood facing.
INTEGRATED
IMPORTANT NOTE: If you choose to stain or seal the
wood facing, be aware that some of these substances are
hazardous and will damage stored wine.
5/8"
MAXIMUM THICKNESS
(16)
7/64"
(3)
11/2" (38)
27/32"
(21)
5/64"
WINE STORAGE
(2)
A (WIDTH)
(9)
9/16" (14)
FRONT VIEW
WINE SHELF WOOD FACING
WINE STORAGE MODELS
UNDERCOUNTER
23/64"
SIDE VIEW
Wine Storage
83
BUILT-IN
subzero.com/specs
Door Clearance—Undercounter Models
FULL-SCALE TEMPLATE
PRO 48
To allow for a 145° door opening,
the unit should extend a minimum of
1/4" (6) beyond the front surface of
adjacent cabinetry. The unit can be
installed flush, however, there is
potential for interference with the
panel if the door is opened past 90°.
ADJACENT
CABINETRY
UNDERCOUNTER
UNIT
INTEGRATED
DOOR CLOSED
1/2"
(13)
3/4" (19) DOOR PANEL
1/8" (3)
WINE STORAGE
1/4" (6)
HINGE DETENT
AT 145° OPENING
(DOOR OPENS PAST 145°)
1" (25)
TOP VIEW
SCALE
UNDERCOUNTER
0"
DOOR OPENING 145°
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising