3000 Version 3: Quick Reference Exits/Enters COOL MODE. Check actual, setpoint temperatures and software versions. Access programming, respond to left-display prompts and check recovery. Access Filter Menu if enabled Pressed Individually: Scroll menu, programming options. Pressed Simultaneously: Launches Polish. Product buttons. Press to begin and end a cook cycle. Press and hold to stop a cook. Removable Menu Strip Exit Menus, Scan programmed menu items. Pressed Individually: Scroll menu, programming options. Pressed Simultaneously: Changes to 2nd language if programmed. ON/OFF ON/OFF Left Side Product Buttons: 1-5 and 11-15 are products for left side display. ON/OFF Product Button LED: Lit when product is cooking or holding. cancel alarm. HOLD displayed: Press blinking product button to cancel hold alarm. Cancel Cook Cycle: Press and hold product button. Right Side Product Buttons: 6-10 and 16-20 are products for right side display. Thermometer: Fryer ON: Press and release for setpoint/left; vat temp/right. Thermometer: Fryer OFF: Press and re lease to display temperature, time, date, sys tem version, 3000 version. Press and hold for Controller Button Navigation AIF, ATO board versions. Product: Press to start cook cycle. Press at Checkmark(): Fryer OFF: Press and hold end of cook cycle to stop alarm. 3 seconds: Scroll filter usage; Press and hold Exit/Scan: Press once, all programmed Cooking 10 seconds: Main Menu-Product setup product buttons are lit; Select Product dis COOL displayed: Press product button or Checkmark(): Fryer ON: Press and replayed. Press product button to view product Exit Cool button; fryer heats to setpoint and lease: Check recovery. Press and hold 4 secname. Press right arrow to view parameters. displays READY. onds: Info Mode. Press Exit/Scan again to repeat. Press Exit/ Press product button and drop product. *Filter: Press and hold: Filter options: Filter, Scan twice to escape. - - - - displayed: The vat temperature is out Clean and Filter, Dispose, and Boil Out (only Left/Right Arrows (): Navigate options of the READY zone. with controller off). in left display. Press and hold simultaneously READY displayed: Press product button and *Filter: Press and release: Cooks Remaining. to launch Polish cycle. drop product. (*NOTE: Functions only if enabled) Up/Down Arrows (): Navigate options in SHAKE displayed: If shake is needed, alarm right display. Press and hold simultaneously sounds. to change language if programmed. DONE displayed: Press product button to 819-6986 MAR 2013 Exit Cool: Press to enter/exit Cool Mode. Press ON/OFF button. Fryer enters melt cycle before switching to full temperature and heating to setpoint. Exit melt cycle by pressing and releasing the Exit Cool button or any programmed product button. Displays show Exit Melt? on left and YES NO on the right. Press to exit. Common programming and navigation are shown below. The left and middle column show the computer displays; the right column has the action necessary to continue. Exit from a programming step at any time by pressing the Scan key until the display returns to its pre-programming status. Filter Menu Navigation* ( if Filters enabled) Cool, READY Cool, READY Press and hold Filter button for 10 seconds Programming For Single Setpoint Cooking* *Filter Blank Press to scroll to choices: Filter, Clean and Filter, Dispose, Fill Vat from Bulk (Bulk only) Boil Out (only with fryer OFF) and Exit. With the desired choice displayed press . *NOTE– Options only available if enabled. Left Display Right Display OFF OFF PRODUCT setup Product Setup Select Product LONG Name 1 alarm name 1 Alarm Mode Blank Enter Code Blank Product name or button number Product name or button number 0:00 or previously entered time Temp Number 0:00 or previously entered time Shake Auto or manual 1 Alarm tome HOLD TIME Short 0 Exit Exit Select Product Blank Product Setup OFF Blank Short Name 1 Time 1 TempR 1 SENSITIVITY 1 Alarm TIME Left Display Right Display Action Press until Main Menu changing to Product Setup is displayed. Press Enter 1650 Press desired product button Enter product name with letter keys. Press . Action * The Filter button is disabled as a factory default setting. When Filter is disabled, the Filter button has no function. Pressing it with the fryer ON or OFF will have no effect. See page 1-2 of the manual for an explanation of enabling 3000 Version 3 options. Enter abbreviated product name with letter keys. Press . Enter time with numbered keys. Press . (Enter Info Mode Navigation 0:00 here and press Exit/Scan to unassigned button.) OFF or READY OFF or Ready Press until INFO MODE is displayed and release. Last Dispose Stats Blank Press to scroll to choices: *Last Dispose Stats, Daily Stats, Selected Period Stats, Last Load Stats. With the desired choice displayed press . *NOTE: With Filter option disabled, not all data in these features will be collected. Enter new temperature. Press . Set to desired position with keys. Press . Enter time in cook cycle for audible alarm for shaking. Press . Set to desired position with keys. Press . Set to desired position with keys. Press . Set to desired position with keys. Press . Enter time in minutes to hold product before discarding. Press . Press Scan button to exit or the button for additional programming. More Programming? Press product button and follow instructions above Exit Programming? Press Scan Button. Press Scan OFF * The 3000 Version 3 allows segmented cooking (the ability to set up to five different times and temperatures). When the Cooks feature is enabled, a different programming sequence is also enabled. The menu shown above is with this feature disabled. Left Display Right Display Action Vat Setup Navigation Left Display Right Display Action OFF OFF Start with the far Left controller. Press until INFO MODE is displayed, changing to Main and then Product Setup. Product Setup Blank Press to scroll to Vat Setup. Vat Setup Enter Code Enter 1656 System* Blank Press to scroll to choices: Time/Date, DST Setup, E-Log, Change Password. With the desired choice displayed, press . Note: System Cool Mode default settings and Filter setups are only available if enabled.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project