Dwyer Series 3BV3H Instruction Manual

Dwyer Series 3BV3H Instruction Manual
Bulletin V-3BV3H
Series 3BV3H 3-Way Stainless Steel Ball Valve
TM
Specifications - Installation and Operating Instructions
C
DB
A
Dimensions (in)
NPT
Model
Size
3BV3HX02 1/2˝
3BV3HX03 3/4˝
3BV3HX04 1˝
3BV3HX05 1-1/4˝
3BV3HX06 1-1/2˝
3BV3HX07 2˝
The Series 3BV3H 3-Way Stainless Steel Ball Valve incorporates
heavy duty construction with a full port design. Ball and stem are
manufactured of high quality 316 SS. The 4-seat design is excellent for
high cycle applications. Pneumatic and electric actuators can be easily
mounted using the ISO 5211 mounting pad. The Series 3BV3H offers 1/2
to 2” providing exceptional flow rates, minimizing pressure loss.
OPERATIONS
Manual Operations-To open or close the valve, turn the handle 90° (1/4
turn). Valve in position 1: the handle is parallel (in line) with the valve
pipeline. Valve in position 2: the handle is perpendicular (crossed) with
the valve or pipeline.
Automated Operation-Valves with actuators should be checked for
stem alignment. Most applications are direct mount to the actuator,
greatly reducing any sideload or increased torque. Make sure that all
insert adapters are properly placed on the valve stem and fully engaged
in the actuator.
INSTALLATION
General Information for On-Site Installation-The valve may be fitted in
any position in the pipeline. For automated operation, W.E. Anderson
recommends that the valve and actuator be installed vertically in case of
valve leakage, although this is not necessary for proper operation of the
valve. Prior to installation, inspect valve and pipe ends to make sure they
are free from debris. Materials trapped inside the valve can cause
damage to the seats and result in leakage. Clean pipe ends and check
for proper threading to prevent damage to valve internals. Use a PTFE
based thread sealant applied to the pipe threads. Use a smooth wrench
on the hex portion of the valve, not the valve body, to tighten. Use pipe
wrenches on pipe and pipe fittings only.
©Copyright 2014 Dwyer Instruments, Inc.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
A
3.78
4.21
4.96
5.24
5.94
6.54
B
1.96
2.35
2.50
3.13
3.40
4.13
C
1.89
2.11
2.48
2.62
2.97
3.27
D
2.26
2.72
2.93
3.78
4.07
4.80
Weight
lb (kg)
3.90 (1.77)
5.65 (2.56)
8.85 (4.01)
11.90 (5.40)
18.45 (8.37)
23.25 (10.55)
SPECIFICATIONS
Service: Compatible liquids and gases.
Line Size: 1/2 to 2˝.
End Connection: Female NPT.
Pressure Limit: 1000 psi (69 bar).
Wetted Materials:
Body and ends: CF8M;
Ball and stem: 316 SS;
Seats: RTFE.
Temperature Limit: 450°F (232°C).
Other Materials:
Packing gland, belleville washer, spring washer, body bolts, and
packing nut: 304 SS;
Blank cap: 316 SS;
Body seal, stem packing, and thrust washer: PTFE.
WARRANTY
The Series 3BV3H warranties from defects in materials and
workmanship are covered for (1) year from the date of purchase. In the
unlikely event the valve should fail, the unit can be returned to the factory
for warranty repair if the warranty period has not expired. Be sure to
include a brief description of the problem plus any relevant application
notes. Contact our customer service department for an RGA number and
to set up the return.
Printed in U.S.A. 7/14
DWYER INSTRUMENTS, INC.
ISO
5211
F03/04
F04/05
F04/05
F05/07
F05/07
F07/10
Phone: 219/879-8000
Fax: 219/872-9057
FR# RV-443889-00 Rev. 1
www.dwyer-inst.com
e-mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement