ADTRAN | MX2820 System TL1 | Guide | Adtran MX2820 System TL1 Guide

Adtran MX2820 System TL1 Guide
®
MX2820 System
TL1 Reference Guide
Document Number: 61186003L1-35D
October 2007
MX2820 System TL1 Reference Guide
Trademarks
Front Matter
Any brand names and product names included in this document are trademarks, registered
trademarks, or trade names of their respective holders.
To the Holder of the Document
The contents of this document are current as of the date of publication. ADTRAN® reserves the
right to change the contents without prior notice.
In no event will ADTRAN be liable for any special, incidental, or consequential damages or
for commercial losses even if ADTRAN has been advised thereof as a result of issue of this
publication.
®
901 Explorer Boulevard
P.O. Box 140000
Huntsville, AL 35814-4000
(256) 963-8000
©2007 ADTRAN, Inc.
All Rights Reserved.
ii
61186003L1-35D
Revision History
Revision
Date
Description
A
November 2003
B
August 2004
Add STS-1 and Clock Modules and associated commands
C
March 2005
Add RADIUS documentation
D
October 2007
Initial release
Add 1186002L3 and update document format and add SSH
Conventions
The following typographical conventions are used in this document:
This font indicates a cross-reference link.
This font indicates screen menus, fields, and parameters.
THIS FONT indicates keyboard keys (ENTER, ESC, ALT). Keys that are to be pressed simultaneously
are shown with a plus sign (ALT+X indicates that the ALT key and X key should be pressed at the
same time).
This font indicates references to other documentation and is also used for emphasis.
This font indicates on-screen messages and prompts.
This font indicates text to be typed exactly as shown.
This font indicates silk-screen labels or other system label items.
This font is used for strong emphasis.
NOTE
Notes inform the user of additional, but essential, information or
features.
CAUTION
Cautions inform the user of potential damage, malfunction, or
disruption to equipment, software, or environment.
WARNING
Warnings inform the user of potential bodily pain, injury, or death.
61186003L1-35D
iii
MX2820 System TL1 Reference Guide
Training
ADTRAN offers training courses on our products. These courses include overviews on product
features and functions while covering applications of ADTRAN product lines. ADTRAN
provides a variety of training options, including customized training and courses taught at our
facilities or at customer sites.
For inquiries concerning training, contact ADTRAN:
Training Phone:
800-615-1176, ext. 6996
Training Fax:
256-963-6217
Training Email:
training@adtran.com
iv
61186003L1-35D
Contents
Section 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transport Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL1 Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL1 Message Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operations Support System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCU Client Management Modes of Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MX2820 System TL1 Command Cross-Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1
1-1
1-1
1-1
1-2
1-2
1-3
1-3
1-3
1-4
Section 2
TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Syntax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notations and Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCU Client Management Operation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Expansion Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Common Language Location Identifier (CLLI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment Responses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment Syntax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MX2820 System TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ADTRAN TL1 Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Account Requirements (Access Privileges) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1
2-1
2-2
2-2
2-3
2-3
2-3
2-4
2-4
2-4
2-4
2-5
2-6
2-6
2-7
Section 3
ADTRAN AID Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
SCU Operation Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
SCU Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
61186003L1-35D
v
MX2820 System TL1 Reference Guide
Intelligent Network Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Expansion Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
AID Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Section 4
Common (SCU) TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ACT-USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RADIUS Authentication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Challenge response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CANC-USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MENUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SET-DAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
4-2
4-2
4-2
4-2
4-2
4-2
4-2
4-3
4-3
4-3
4-3
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-4
4-5
4-5
4-5
4-5
4-5
4-5
4-5
4-5
4-6
4-6
4-6
4-6
4-6
4-6
4-6
4-7
Section 5
Provisioning TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
ED-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
vi
61186003L1-35D
Contents
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
RTRV-rr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
RTRV-TH-rr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
SET-TH-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Transmission Entity Data Parameter Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
Section 6
Security TL1 Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DLT-USER-SECU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ED-USER-SECU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61186003L1-35D
6-1
6-2
6-2
6-2
6-2
6-2
6-2
6-2
6-3
6-4
6-4
6-4
6-4
6-4
6-4
6-5
vii
MX2820 System TL1 Reference Guide
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENT-USER-SECU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RTRV-USER-SECU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5
6-6
6-6
6-6
6-6
6-6
6-6
6-7
6-7
6-8
6-8
6-8
6-8
6-8
6-8
6-8
6-9
Section 7
Surveillance TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ALW-MSG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INH-MSG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RTRV-ALM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Format for no Alarm Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Format for Alarm Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii
7-1
7-2
7-2
7-2
7-2
7-3
7-3
7-3
7-3
7-4
7-4
7-4
7-4
7-5
7-5
7-5
7-5
7-6
7-6
7-6
7-6
7-7
7-7
7-7
7-7
7-7
7-7
61186003L1-35D
Contents
RTRV-ALM-ENV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Environmental Alarm Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
RTRV-COND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
RTRV-HDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
RTRV-PM-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16
RTRV-PMSCHED-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18
RTRV-SYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19
61186003L1-35D
ix
MX2820 System TL1 Reference Guide
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RTRV-VER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RTRV-VERSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCHED-PMREPT-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-19
7-20
7-21
7-21
7-21
7-21
7-21
7-21
7-21
7-22
7-23
7-23
7-23
7-23
7-23
7-23
7-23
7-24
7-25
7-25
7-25
7-25
7-26
7-26
7-26
7-26
Section 8
System Maintenance TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SW-TOPROTN-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SW-TOWKG-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Minimum User Access Privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x
8-1
8-2
8-2
8-2
8-2
8-2
8-2
8-2
8-3
8-4
8-4
8-4
8-4
8-4
8-4
8-4
8-5
61186003L1-35D
Contents
Section 9
System Test TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPR-LPBK-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RLS-LPBK-rr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Response Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Normal Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-1
9-2
9-2
9-2
9-2
9-2
9-2
9-3
9-4
9-4
9-4
9-4
9-4
9-4
9-5
Appendix A
Input Commands Data Dictionary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Appendix B
Response Messages Data Dictionary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Appendix C
Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Appendix D
Alarms and Alarm Condition Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCU Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M13 MUX Card Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STS-1 MUX Card Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MX2820 Clock Card Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-1
D-1
D-3
D-5
D-7
Appendix E
Autonomous Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Syntax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performance Monitoring Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61186003L1-35D
E-1
E-1
E-2
E-3
E-3
E-3
xi
MX2820 System TL1 Reference Guide
Condition Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Autonomous Message Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M13 MUX Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Response from Network Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corresponding Clears. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Threshold Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Response from Network Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M13 MUX Alarm Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environmental Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Response from Network Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-3
E-4
E-4
E-4
E-4
E-4
E-5
E-5
E-5
E-5
E-5
E-5
Appendix F
Performance Monitoring Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-1
M13 Mux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-1
STS-1 MUX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-3
Appendix G
MX2820 Service States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1
Limitations of Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1
Event Priorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1
Criteria Monitored for an Entity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1
Definition of AINS Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3
Definitions of Available and Unavailable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3
Recursive alarm suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3
Traditional States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3
Backward Compatibility with Traditional States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4
Operational Service State Model for Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5
Independent Equipment Service States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5
Indication of the Active Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5
State E1a: IS ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6
State E1b: IS STDBYH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7
State E3: OOS-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7
State E4a: OOS-AUMA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-8
State E4b: OOS-MA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-8
State E5a: OOS-AU FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-9
State E5b: IS-ANR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-9
State E6: OOS-AUMA UAS, UEQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-10
Operational Service State Model for Facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-11
The Network Facility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-11
Network Facility vs. DS1/E1 Facility Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-11
Special Note about the EC-1/STS-1 Facility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-11
Change of Facility Traditional State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-15
State F1a: OOS-AUMA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-15
State F1b: OOS-MA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-16
xii
61186003L1-35D
Contents
State F2: OOS-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F3a: OOS-AUMA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F3b: OOS-MA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F4: OOS-AU FLT, AINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F5: IS-ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F6: OOS-AU SGEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F7a: OOS-AU FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F7b: IS-ANR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F8: OOS-AUMA SGEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operational Service State Model for VT Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation in T1 mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation in E1 mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Effects of the Traditional State for an Attached DS1/E1 Facility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P1a: OOS-AUMA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P1b: OOS-MA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P2: OOS-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P3a: OOS-AUMA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P3b: OOS-MA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P4: OOS-MA, SDEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P5: IS-ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P6: OOS-AU SGEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P7a: OOS-AU FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P7b: IS-ANR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P8: OOS-AUMA SGEO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G-17
G-18
G-19
G-20
G-21
G-22
G-23
G-24
G-25
G-26
G-26
G-26
G-28
G-29
G-30
G-31
G-32
G-33
G-34
G-35
G-36
G-37
G-38
G-39
Appendix H
List of Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-1
61186003L1-35D
xiii
MX2820 System TL1 Reference Guide
Figures
Figure G-1.
Figure G-2.
Figure G-3.
Figure G-4.
Figure G-5.
Figure G-6.
Figure G-7.
Figure G-8.
xiv
MX2820 System Service State Hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-2
Equipment Service States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-5
Facility Service States, Provisioned Service State = IS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-12
Facility Service States, Provisioned Service State = OOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-13
Other Facility Service States, Traditional State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-14
VT Service States, Provisioned Service State = IS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-26
VT Service States, Provisioned Service State = OOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-27
Other VT Service States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-27
61186003L1-35D
Tables
Tables
Table 1-1.
Table 1-2.
Table 2-1.
Table 2-2.
Table 2-3.
Table 3-1.
Table 3-2.
Table 3-3.
Table 5-1.
Table 5-2.
Table 5-3.
Table 5-4.
Table 5-5.
Table 5-6.
Table 5-7.
Table 5-8.
Table 5-9.
Table 7-1.
Table A-1.
Table B-1.
Table C-1.
Table D-1.
Table D-2.
Table D-3.
Table D-4.
Table E-1.
Table F-1.
Table F-2.
Table G-1.
Table G-2.
Table G-3.
Table G-4.
Table G-5.
Table G-6.
Table G-7.
Table G-8.
Table G-9.
MX2820 Network Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
TL1 Input Command General Format Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
TL1 Response Message Format Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
MX2820 TL1 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
19-Inch Chassis AID Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
23-Inch Chassis AID Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
MX2820 AID Parameter Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
SCU (P/N 1186003Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-SCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
DS3 MUX (P/N 1186002Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13
DS3 MUX (P/N 1186002Lx) T3 Data Provisioning Parameters
AID: 1-T3-(MUX1-MUX9)-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
DS3 MUX (P/N 1186002Lx) T1 Data Provisioning Parameters
AID: 1-T1-(MUX1-MUX9)-(1-28) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
STS-1 MUX (P/N 1186005Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22
STS-1 MUX (P/N 1186005Lx) STS-1 Data Provisioning Parameters
AID: 1-STS1-(MUX1-MUX9)-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27
STS-1 MUX (P/N 1186005Lx) VT Data Provisioning Parameters
AID: 1-VT1-(MUX1-MUX9)-(1-28) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
STS-1 MUX (P/N 1186005Lx) T1 Data Provisioning Parameters
AID: 1-T1-(MUX1-MUX9)-(1-28) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29
Clock Card (P/N 1186004Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-CLK-(A or B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
MX2820 Environmental Alarm Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
TL1 Input Commands Data Dictionary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
TL1 Response Messages Data Dictionary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1
MX2820 System Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1
MX2820 SCU Alarm Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-1
MX2820 M13 MUX Alarm Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-3
MX2820 STS-1 MUX Alarm Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-5
MX2820 Clock Card Alarm Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D-7
Autonomous Messages Parameter Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-1
M13 MUX Performance Monitoring MONTYPE Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-1
STS-1 MUX Performance Monitoring MONTYPE Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-3
State E1a: IS ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6
State E1b: IS STDBYH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7
State E3: OOS-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-7
State E4a: OOS-AUMA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-8
State E4b: OOS-MA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-8
State E5a: OOS-AU FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-9
State E5b: IS-ANR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-9
State E5b: IS-ANR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-10
Change of Facility Traditional State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-15
61186003L1-35D
xv
MX2820 System TL1 Reference Guide
Table G-10.
Table G-11.
Table G-12.
Table G-13.
Table G-14.
Table G-15.
Table G-16.
Table G-17.
Table G-18.
Table G-19.
Table G-20.
Table G-21.
Table G-22.
Table G-23.
Table G-24.
Table G-25.
Table G-26.
Table G-27.
Table G-28.
Table G-29.
Table G-30.
Table G-31.
Table G-32.
xvi
State F1a: OOS-AUMA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F1b: OOS-MA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F2: OOS-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F3a: OOS-AUMA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F3b: OOS-MA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F3b: OOS-MA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F5: IS-ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F6: OOS-AU SGEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F7a: OOS-AU FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State F7a: OOS-AU FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State OOS-AUMA SGEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transition Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P1a: OOS-AUMA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P1b: OOS-MA UAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P2: OOS-MA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P3a: OOS-AUMA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P3b: OOS-MA FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P4: OOS-MA, SDEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P5: IS-ACT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P6: OOS-AU SGEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P7a: OOS-AU FLT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P7b: IS-ANR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State P8: OOS-AUMA SGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G-15
G-16
G-17
G-18
G-19
G-20
G-21
G-22
G-23
G-24
G-25
G-28
G-29
G-30
G-31
G-32
G-33
G-34
G-35
G-36
G-37
G-38
G-39
61186003L1-35D
Section 1
Introduction
PURPOSE
This manual provides Transaction Language 1 (TL1) reference information for the MX2820
System. This document is intended for use by operating company personnel who use TL1
commands to perform network management tasks for the MX2820 System and its associated
network equipment. For additional information about the MX2820 System, refer to the
MX2820 System Manual (P/N 61186003L1-1).
TL1 OVERVIEW
TL1 software provides an ASCII-based protocol that allows the exchange of messages between
an Operations Support System (OSS) and the MX2820 System. The TL1 software also allows
the exchange of messages between the OSS and the network equipment that connects to the
MX2820 System. An OSS is also referred to as an Operations System (OS).
Transport Methods
The TL1 software uses the following methods for transporting messages:
• X.25 packet network (Network Management)
• Transmission Control Protocol/Internet Protocol (TCP/IP) Telnet socket
There are two configurable ports for TL1 access (having default values of 2000 and 2001). The
first indicates that the connection was made and describes the MENUS command. The second
is a raw connection that will not send anything upon connection.
TL1 Sessions
The maximum number of TL1 logon sessions at one time depends on the physical and logical
interfaces to the MX2820 System Controller Unit (SCU).
The X.25 interface allows a maximum of four TL1sessions, one per Switched Virtual Circuit
(SVC) with up to four SVCs.
The Ethernet interface allows up to eight Telnet sessions. All eight sessions can be TL1 over
TCP/IP.
61186003L1-35D
1-1
MX2820 System TL1 Reference Guide
TL1 Message Types
The TL1 software provides four types of operation messages:
• Input command
An input command is a message from an OS or other source to a Network Element (NE).
The message instructs or requests the NE to perform a management-related function.
• Acknowledgment
An acknowledgment is a reply from the NE that indicates an input command is being
acted upon. An NE sends an acknowledgment response if a normal response or error
response cannot be sent within two seconds. The MX2820 System supports the In
Progress (IP) acknowledgment response.
The IP acknowledgment response indicates the request has been initiated and produces
subsequent output messages which provide a termination report or a termination report
with command results.
• Output response (Response message or Error message)
An output response is a detailed reply or set of replies to an input command. It contains
information that indicates whether the command was successfully executed. The output
response also contains any data that needs to be returned to the OS/user.
• Autonomous
An autonomous message is generated by an NE either on a periodic basis or is generated
by an NE to report an alarm or an event that occurs at the NE. These messages are
normally triggered by alarm conditions and are not in response to any input command.
OPERATIONS SUPPORT SYSTEM
An OSS consists of application software that runs on a host computer and allows the host
computer to provide network management functions. The SCU provides the network
management interface for the MX2820 System and the network equipment that interconnects
to and interworks with the MX2820 System.
The SCU and the MX2820 System supports the following network management functions:
• Configuration
• Fault
• Performance Monitoring
• Security
• Test
From a network management standpoint, the MX2820 System and the network equipment are
referred to as NEs that exchange messages with the host computer of the OS.
1-2
61186003L1-35D
Section 1, Introduction - SCU Client Management Modes of Operations
SCU CLIENT MANAGEMENT MODES OF OPERATIONS
If an SCU is a client unit, the SCU can operate in two modes: Intelligent Network Element
(INE) and Expansion Shelf. The mode of operation has an impact on the Target Identifier (TID)
and the Access Identifier (AID) fields in a TL1 command. Refer to the “TL1 Commands” section
in this document for additional information about these fields.
If an SCU is a host unit, the client management mode is not available.
NETWORK ELEMENTS
The MX2820 System supports and/or provides the NEs shown in Table 1-1.
NOTE
This reference guide is also used for the coinciding RoHS products
not specifically mentioned. The RoHS part number uses an “E” or
“G” instead of an “L” in the part number.
Table 1-1. MX2820 Network Elements
Network Element
Part Number
System Controller Unit
1186003Lx
DS3 MUX
1186002Lx
Clock Card
1186004Lx
STS-1 MUX
1186005Lx
Note: Refer to www.adtran.com for a complete list of products.
REFERENCES
For more information, including details on each list series, refer to the MX2820 System
Manual (P/N 61186003L1-1).
61186003L1-35D
1-3
MX2820 System TL1 Reference Guide
MX2820 SYSTEM TL1 COMMAND CROSS-REFERENCE
Table 1-2 lists the available TL1 commands for the MX2820 System.
Table 1-2. TL1 Commands
Common (SCU)
Section-Page
Command Type
ACT-USER
4-2
Common
ALW-MSG
7-2
Surveillance
CANC-USER
4-4
Common
DLT-USER-SECU
6-2
Security
ED-rr
5-2
Provisioning
ED-USER-SECU
6-4
Security
ENT-USER-SECU
6-6
Security
INH-MSG
7-4
Surveillance
MENUS
4-5
Common
OPR-LPBK-rr
9-2
System Test
RLS-LPBK-rr
9-4
System Test
RTRV-rr
5-4
Provisioning
RTRV-ALM
7-6
Surveillance
RTRV-ALM-ENV
7-8
Surveillance
RTRV-COND
7-11
Surveillance
RTRV-HDR
7-13
Surveillance
RTRV-PM-rr
7-15
Surveillance
SCHED-PMREPT-rr
7-25
Surveillance
RTRV-PMSCHED-rr
7-17
Surveillance
RTRV-SYS
7-19
Surveillance
RTRV-TH-rr
5-6
Provisioning
RTRV-USER-SECU
6-8
Security
RTRV-VER
7-21
Surveillance
RTRV-VERSION
7-23
Surveillance
SET-DAT
4-6
Common
SET-TH-rr
5-8
Provisioning
SW-TOPROTN-rr
8-2
System Maintenance
SW-TOWKG-rr
8-4
System Maintenance
1-4
61186003L1-35D
Section 2
TL1 Commands
INTRODUCTION
This section provides information about the TL1 commands for the MX2820 System.
SYNTAX
The following syntax is used with TL1 commands.
• A colon (:) separates the fields of a TL1 command.
• The colon also separates unused or empty fields from required fields in a TL1 command.
• A comma (,) separates data entry items within a common data block, a specific data block,
and a state block.
• A semicolon (;) indicates the end of a TL1 command.
NOTE
The carriage return does not indicate the end of a TL1 command.
NOTE
The BACKSPACE and DELETE keys are nonfunctional when entering
TL1 commands. To abort a command, press CTRL+X.
61186003L1-35D
2-1
MX2820 System TL1 Reference Guide
NOTATIONS AND CONVENTIONS
The following notations and conventions are used for TL1 input commands:
<>
Information inside of the less than and greater than symbols
indicates a data entry item for a command. The symbols are not
transmitted as part of the command.
[]
Information inside of brackets indicates the parameter is
optional for an input command. The brackets are not transmitted as part of the command.
{|}
Information inside of braces and separated by a pipe indicates
that one of the parameters must be selected from the list. The
braces and the pipes are not transmitted as part of the
command.
Unless noted otherwise, the TL1 input commands are not case sensitive. This manual
presents the commands in all uppercase as a documentation standard/convention.
GENERAL FORMAT
A TL1 input command for the MX2820 System has the following general format:
<verb>:<tid>:<aid>:<ctag>:<general block>:<common data block>:
<specific data block>:<state block>;
Table 2-1 provides a description for each field. “Appendix A, Input Commands Data
Dictionary” and “Appendix B, Response Messages Data Dictionary” contains additional information about the parameters used with TL1 commands and response messages to the TL1
commands.
NOTE
The MX2820 System does not output an error message for data
entries in a non-supported field of a TL1 command.
Table 2-1. TL1 Input Command General Format Descriptions
Field
Description
<verb>
This field contains the TL1 command verb. The command verb indicates the
action that is to be performed at the MX2820 System shelf, or another NE. The
command verb can have up to two optional modifiers.
The valid forms are as follows:
• VERB
• VERB-MODIFIER
• VERB-MODIFIER-MODIFIER.
<tid>
2-2
This field is the Target Identifier (TID). For more information, refer to the “TID”
on page 2-3 subsection.
61186003L1-35D
Section 2, TL1 Commands - General Format
Table 2-1. TL1 Input Command General Format Descriptions (Continued)
Field
Description
<aid>
This field is the Access Identifier (AID). For more information, refer to “Section
3, ADTRAN AID Formats”.
<ctag>
The Correlation Tag (CTAG) is a one-to-six alphanumeric identifier that is echoed in the response message for a TL1 command. The CTAG correlates input
commands with response messages. All response messages to a TL1 command
must have the same CTAG.
<general block>
This field is not used in this application and should be left empty. This field
requires entering a field separator unless the <ctag> field is the last required
field.
<common data
block>
This field contains data that applies to specific TL1 commands. Refer to the
specific TL1 command sections and to applicable data dictionary appendices in
this document for additional information.
<specific data
block>
This field contains data that applies to specific TL1 commands. Refer to the
specific TL1 command sections and to applicable data dictionary appendices in
this document for additional information.
<state block>
This field contains data that applies to specific TL1 commands. Refer to the
specific TL1 command sections and to applicable data dictionary appendices in
this document for additional information.
:
The colon is used as a field separator.
;
The semicolon is used as a TL1 command terminator. The command terminator can be used after the last non-empty field without supplying the remaining
colon separators.
TID
The TID parameter indicates the end-target NE for a TL1 command. The client management
mode of operation for the SCU can have an impact on the value for this field. The following
subsection provides additional information.
NOTE
If the SCU functions as the host network management unit, the
client management mode of operation is not available.
SCU Client Management Operation Mode
INE
When operating in the INE mode, the SCU has a unique TID and operates as an independent
intelligent network element. TL1 commands route to this SCU if the TIDs in the commands
match the TID of this SCU. INE is the default client management mode for the SCU. With this
operation mode, the shelf number for the <aid> field is always a 1.
61186003L1-35D
2-3
MX2820 System TL1 Reference Guide
Expansion Shelf
Up to thirty-two SCUs can share a common TID for systems operating in the “Expansion
Shelf” mode. TL1 commands route to the appropriate SCU based on the shelf number in the
<aid> field.
Common Language Location Identifier (CLLI)
The CLLI code is often used as the TID in TL1 commands. The CLLI code is one- to twentyalphanumeric characters that are not case sensitive. The CLLI code identifies physical
locations and equipment such as buildings, central offices, antennae, channel banks, and
shelves. CLLI codes are also used as unique identifiers for a single NE. CLLI codes are
assigned at the OS. The following example provides a CLLI code.
Example:
HTVLALEXD16
Input Parameters:
HTVL
The first four character identify the place name (Huntsville).
AL
The next two characters identify the state, region, or territory
(Alabama).
EX
The next two characters identify the central office location code.
These characters typically identify the street location of the
specific central office.
In this example, EX represents Explorer Blvd.
D
The next single alpha character is the equipment type code. The
equipment type code of D identifies general administrative
equipment.
16
The last two numeric characters represent a unique identifier
number for a specific central office. These characters identify
which NE is being addressed.
ACKNOWLEDGMENT RESPONSES
If an NE cannot send a normal response or an error response to the OS/user within two
seconds of receiving a TL1 command, the NE sends an acknowledgment response of IP.
Acknowledgment Syntax
The syntax for the acknowledgment responses supported by the MX2820 System are as
follows:
NOTE
This symbol (<) represents the TL1 ready indicator.
IP[^<CTAG>]
<
2-4
<cr>
<lf>
61186003L1-35D
Section 2, TL1 Commands - Normal Response Messages
NORMAL RESPONSE MESSAGES
The standard TL1 response message for the MX2820 System has the following format:
<cr> <lf> <lf>
^^^<source identifier>^<date>^<time> <cr> <lf>
M^^<ctag>^<code> <cr> <lf>
^^^<error_code> <cr> <lf>;
Table 2-2 provides a description for each field.
Table 2-2. TL1 Response Message Format Descriptions
Field or Symbol
Description
<cr>
Carriage Return
<lf>
Line Feed
Caret (^)
The Caret represents one space character in the acknowledgment or response
message.
<source identifier>
The Source Identifier (SID) identifies the shelf “TID”.
<date>
The Date field is in the form YY-MM-DD.
• YY indicates year and ranges from 00 to 99.
• MM indicates month and ranges from 01 to 12.
• DD indicates day and ranges from 01 to 31.
<time>
The Time field is in the form HH-MM-SS.
• HH indicates hour and ranges from 00 to 23.
• MM indicates minutes and ranges from 00 to 59.
• SS indicates seconds and ranges from 00 to 59.
<ctag>
The Correlation Tag (CTAG) corresponds to the CTAG from the TL1 input command.
<code>
The Code field indicates the transaction status for the TL1 input command.
• COMPLD indicates normal completion.
• DENY indicates an error condition.
<error_code>
The Error Code appears after a DENY condition. Refer to “Appendix C, MX2820
System Error Codes” for applicable error codes.
The MX2820 System does not output an Error message for data entries in a
non-supported field of a TL1 command.
61186003L1-35D
2-5
MX2820 System TL1 Reference Guide
MX2820 SYSTEM TL1 COMMANDS
Table 2-3 provides TL1 command categories for the MX2820 System.
Table 2-3. MX2820 TL1 Commands
Common
(SCU)
Provisioning Security
Surveillance
System
Maintenance
System Test
ACT-USER
ED-rr
DLT-USER-SECU
ALW-MSG
SW-TOPROTN-rr OPR-LPBK-rr
CANC-USER RTRV-rr
ED-USER-SECU
INH-MSG
SW-TOWKG-rr
MENUS
SET-TH-rr
ENT-USER-SECU
RTRV-ALM
SET-DAT
RTRV-TH-rr RTRV-USER-SECU RTRV-ALM-ENV
RLS-LPBK-rr
RTRV-COND
RTRV-HDR
RTRV-PM-rr
RTRV-PMSCHED-rr
RTRV-SYS
RTRV-VER
RTRV-VERSION
SCHED-PMREPT-rr
ADTRAN TL1 Commands
The following TL1 commands are ADTRAN-specific commands:
• “MENUS” on page 4-5
• “RTRV-VER” on page 7-21
• “RTRV-VERSION” on page 7-23
2-6
61186003L1-35D
Section 2, TL1 Commands - User Account Requirements (Access Privileges)
USER ACCOUNT REQUIREMENTS (ACCESS PRIVILEGES)
The SCU provides the ability to control access to the MX2820 System with user security
accounts that require users to enter a username and password. The SCU can also control
access to the system which involves assigning command access privileges and operation privileges to user security accounts. Command access privileges determine which commands a
user is allowed to enter. Operation privileges determine which operations a user is allowed to
perform.
User accounts are created at the ADMIN level of the SCU. The pre-defined user accounts are
as follows:
ADMIN, ADTRAN
These user accounts include all allowances of the READWRITE
account, add write access to all SCU and line card provision
items, and add access to provision passwords for each user
account through the General Provisioning menu. Creating user
accounts requires assigning username, password, and
command privilege level.
READONLY
This user account allows read access to any parameter in the
SCU and line cards. READONLY user accounts have no security
access.
READWRITE, TEST
These user accounts includes all allowances of the READONLY
account and adds write access to a limited number of SCU
items and all line card provision items. Changes to network
management items, such as Internet Protocol (IP) address and
TID are not allowed. A READWRITE or TEST user account can
change its own password, but has no other security access.
All accounts can be deleted and replaced with user-defined accounts. Any inactive account
(not currently logged on) can be disabled.
TL1 login accounts (TL1 sessions) require use of the ACT-USER command to access the
system.
61186003L1-35D
2-7
MX2820 System TL1 Reference Guide
This page is intentionally blank.
2-8
61186003L1-35D
Section 3
ADTRAN AID Formats
INTRODUCTION
This section provides information about ADTRAN AID formats for the MX2820 System.
SCU OPERATION MODE
The operation mode for the SCU can affect how and when the AID parameter is entered for the
TL1 commands. In addition, a NE entity, such as the card type, being targeted by the TL1
command can affect the AID parameter.
SCU Unit
How the SCU functions in the network management configuration determines whether the
client management mode is available. If the SCU functions as a host unit, the client
management mode is not available and the AID parameter is determined by the NE entity
being targeted by the TL1 command. If the SCU functions as a client, the client management
mode is available and defaults to INE.
Intelligent Network Element
If the SCU operates in the INE mode, the shelf number for the AID parameter in a TL1
command is always one. The SCU has a unique TID when operating in the INE mode. TL1
commands route to this SCU if the TID in the command matches the TID of the SCU. INE
shelves are provisioned with a unique TID during system turnup, and the shelf number is
forced to one.
Expansion Shelf
If the SCU operates in the Expansion Shelf mode, a common TID can be shared by up to 32
SCUs. TL1 commands route to the appropriate SCU based on the shelf number in the AID.
The shelf number ranges from 1–32. The Expansion Shelf is automatically assigned the TID of
the host and is provisioned with a shelf number during system turnup.
61186003L1-35D
3-1
MX2820 System TL1 Reference Guide
AID STRUCTURE
The AID parameter for the MX2820 System consists of a hierarchy-based format that includes
the following data separated by dashes: the shelf number, the category type, and one or two
additional entries. The terms “unit” or “bank” can also be used to describe the shelf number.
The shelf number is assigned by TIRKS.
For the MX2820 System, if the SCU is in the INE client mode, the shelf number is always one.
If the SCU is in the Expansion Shelf client mode, the shelf number ranges from 1 to 254.
Table 3-1 provides the AID inputs for the 19-inch chassis and Table 3-2 provides the AID
inputs for the 23-inch chassis.
Table 3-1. 19-Inch Chassis AID Inputs
Shelf
Category
Entity 1
Entity 2
1 to 254
T3
MUX1 to
MUX7
1
T1
MUX1 to
MUX7
1 to 28 (corresponding to individual DS1s within DS3)
VT1
MUX1 to
MUX7
1 to 28 (corresponding to individual VTs within the STS-1)
EQPT
MUX1 to
MUX7
A or B
A = Working Unit
B = Protect Unit
STS1
CLK
ENV
SCU
N/A
1 to 5
N/A
Table 3-2. 23-Inch Chassis AID Inputs
Shelf
Category
Entity 1
Entity 2
1 to 254
T3
MUX1 to
MUX9
1
T1
MUX1 to
MUX9
1 to 28 (corresponding to individual DS1s within DS3)
VT1
MUX1 to
MUX9
1 to 28 (corresponding to individual VTs within the STS-1)
EQPT
MUX1 to
MUX9
A or B
A = Working Card
B = Protect Card
STS1
CLK
ENV
3-2
SCU
N/A
1 to 5
N/A
61186003L1-35D
Section 3, ADTRAN AID Formats - AID Structure
There are no spaces between the parts of the AID parameter. Leading zeros are not significant.
They are ignored on input and suppressed on output.
Table 3-3 provides some examples of AID parameters.
Table 3-3. MX2820 AID Parameter Examples
AID
Description
6-T3-MUX4-1
Shelf 6, Category T3, MUX Pair, Facility Input 1
6-T1-MUX4-26
Shelf 6, Category T1, MUX Pair, DS1 26 of 28
6-EQPT-MUX4-A
Shelf 6, Category Eqpt, MUX Pair, Working Card
6-ENV-2
Shelf 6, Category Env, Auxiliary Alarm Input #2
6-EQPT-SCU
Shelf 6, Category Eqpt, SCU
6-EQPT-CLK-B
Shelf 6, Category Eqpt, CLK Pair, Protect Card
The TL1 command sections and the data dictionaries in the appendices also contain information about the AID parameter.
61186003L1-35D
3-3
MX2820 System TL1 Reference Guide
This page is intentionally blank.
3-4
61186003L1-35D
Section 4
Common (SCU) TL1 Commands
INTRODUCTION
The following TL1 commands apply to the SCU or apply to the MX2820 System:
• “ACT-USER” on page 4-2
• “CANC-USER” on page 4-4
• “MENUS” on page 4-5
• “SET-DAT” on page 4-6
61186003L1-35D
4-1
MX2820 System TL1 Reference Guide
ACT-USER
The ACT-USER (Activate-User) command allows access to the MX2820 System from a local or
remote terminal. The user must have a valid User ID (UID) and Private ID (PID).
Minimum User Access Privilege
NONE
Input Format
ACT-USER:[<TID>]:<UID>:[<CTAG>]::<PID>;
Example:
ACT-USER:HTVLALEXD16:USER1:1::PASSWORD1;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
UID
The UID indicates the User ID or logon name for the user. The
UID can have up to 10 alphanumeric characters.
CTAG
For the Correlation Tag (CTAG), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
PID
The PID contains the password for the user. The password
consists of an alphanumeric character string with a maximum
length of 12 characters. The first character must be a letter.
Valid characters are as follows:
• Letters A–Z
• Digits 0–9
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 1
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<ctag>^COMPLD <cr> <lf>
;
4-2
61186003L1-35D
Section 4, Common (SCU) TL1 Commands - ACT-USER
Example:
M
;
HTVLALEXD16
1 COMPLD
02-05-30
13:28:03
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
RADIUS Authentication
Login through TL1 occurs through the use of the ACT-USER command. When RADIUS
authentication is enabled, this command works as with local authentication.
Input Format
ACT-USER::<username>:::<password>;
If the username or password is enclosed in quotation marks it is treated as a case-sensitive
string. Otherwise, all of the characters present are shifted to upper case. If the username or
password contains a quotation mark, it must be doubled in the command string in order to
prevent unwanted string termination.
Example:
Login:
Password:
AdMiN
PaSs”WoRd
The proper command to login with the above combination is as follows:
ACT-USER::”AdMiN”:::”PaSs””WoRd”;
Challenge response
If the RADIUS server sends a challenge request, the initial login is denied with a PLNA error
code. Immediately after the DENY message are three lines of text. The first indicates the
challenge message sent by the server. The second and third lines are as follows:
/*REPEAT ACT-USER COMMAND. */
/*USE SAME USERNAME. USE CHALLENGE RESPONSE AS PASSWORD. */
When this challenge is received, follow the same format used prior to login, but now instead of
the password use the challenge request.
61186003L1-35D
4-3
MX2820 System TL1 Reference Guide
CANC-USER
The CANC-USER (Cancel-User) command terminates a TL1 session.
Minimum User Access Privilege
READONLY
Input Format
CANC-USER:[<TID>]::[<CTAG>];
Example:
CANC-USER:HTVLALEXD16::5;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 5
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^COMPLD <cr> <lf>
;
<cr> <lf>
Example:
M
;
HTVLALEXD16
5
COMPLD
02-05-30
16:36:54
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
4-4
61186003L1-35D
Section 4, Common (SCU) TL1 Commands - MENUS
MENUS
The MENUS command switches the interface for a TL1 session between the TL1 mode and the
Menus mode. To accomplish this, the MENUS command is entered while in a TL1 session. The
menu session can be switched back to a TL1 session by logging off the menu session.
The Local Echo should be disabled while in the Menus mode. Y-modem software updates to
the SCU or to a line access module are not supported while in the Menus mode.
Minimum User Access Privilege
READONLY
Input Format
MENUS:[<TID>];
Example:
MENUS:HTVLALEXD16;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
Response Format
Acknowledgment
The NE does not send an acknowledgment response for the MENUS command.
Normal Response
The TL1 session switches to Menus mode.
Error Response
<cr> <lf> <lf>
^^^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
4-5
MX2820 System TL1 Reference Guide
SET-DAT
The SET-DAT (Set-Date) command sets the date and time for the SCU.
Minimum User Access Privilege
ADMIN
Input Format
SET-DAT:[<TID>]::[<CTAG>]::[YY-MM-DD][<,HH-MM-SS>];
Example:
SET-DAT:HTVLALEXD16::32::02-06-03,11-32-00;
Input Parameters
TID
The Target Identifier TID identifies the target NE for the
command. Refer to the “TID” on page 2-3 for additional
information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
YY-MM-DD
This parameter indicates the year, month, and day. Refer to
“Appendix A, Input Commands Data Dictionary” for additional
information.
HH-MM-SS
This parameter indicates the hour, minutes, and seconds. Refer
to “Appendix A, Input Commands Data Dictionary” for
additional information.
Response Format
Acknowledgment
The NE does not send an acknowledgment response for this TL1 command.
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS >
M^^<CTAG>^COMPLD <cr> <lf>
;
<cr>
<lf>
Example:
HTVLALEXD16 02-06-03,11-32-00
M 32 COMPLD
;
4-6
61186003L1-35D
Section 4, Common (SCU) TL1 Commands - SET-DAT
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
<cr>
<lf>
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
4-7
MX2820 System TL1 Reference Guide
This page is intentionally blank.
4-8
61186003L1-35D
Section 5
Provisioning TL1 Commands
INTRODUCTION
The Provisioning TL1 commands for the MX2820 System allow reconfiguration of an NE. The
Provisioning TL1 commands for the MX2820 System are as follows:
• “ED-rr” on page 5-2
• “RTRV-rr” on page 5-4
• “RTRV-TH-rr” on page 5-6
• “SET-TH-rr” on page 5-8
61186003L1-35D
5-1
MX2820 System TL1 Reference Guide
ED-RR
The ED-rr command instructs the NE to change parameters associated with one or more facilities (transmission entities) for the specified AID type.
For the MX2820 System, the supported rr modifiers are as follows:
• EQPT
• T1
• T3
• STS1
• VT1
Minimum User Access Privilege
READWRITE
Input Format
ED-rr:[<TID>]:<AID>:[<CTAG>]::[:[<specific data block>][:<state block>]];
Example:
ED-T3:HTVLALEXD16:1-T1-MUX3-7::::DSXSTATE=ENABLE:OOS;
Input Parameters
5-2
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity or the location of the entity within
the NE being targeted. For additional information, refer to
“Section 3, ADTRAN AID Formats”.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
<specific data block>
For parameters that apply to the ED-rr command, refer to the
“Transmission Entity Data Parameter Tables” on page 5-10.
<state block>
The state parameters provide information about the entity's
ability to perform its service functions. Refer to “Appendix A,
Input Commands Data Dictionary” for additional information.
61186003L1-35D
Section 5, Provisioning TL1 Commands - ED-rr
Response Format
Acknowledgment
IP^<CTAG> <cr>
<
<lf>
Example:
IP
<
9
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
Example:
M
;
HTVLALEXD16
9 COMPLD
02-05-30
16:48:47
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
5-3
MX2820 System TL1 Reference Guide
RTRV-RR
The RTRV-rr (Retrieve-rr) command retrieves data parameters and state parameters for an NE
entity.
For the MX2820 System, the supported rr modifiers are as follows:
• EQPT
• T1
• T3
• STS1
• VT1
NOTE
The AID parameter for the RTRV-rr command supports the ALL
value. ALL is the default value for the AID parameter.
Minimum User Access Privilege
READONLY
Input Format
RTRV-rr:[<TID>]:[<AID>]:[<CTAG>][:::<specific data block>];
Example:
RTRV-EQPT:HTVLALEXD16::30:::CRAFT-BAUD;
Input Parameters
5-4
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity or the location of the entity within
the NE being targeted. For additional information, refer to
“Section 3, ADTRAN AID Formats”.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
<specific data block>
Refer to the “Transmission Entity Data Parameter Tables” on
page 5-10 for parameters that apply to the ED-rr command.
61186003L1-35D
Section 5, Provisioning TL1 Commands - RTRV-rr
Response Format
Acknowledgment
IP^ <CTAG> <cr>
<
<lf>
Example:
IP 30
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
<rspblk> + ;
The <rspblk> has the following format:
^^^"<AID>,<AIDTYPE>:[<CLEI>]:[<specific data block>]:<state block>" <cr> <lf>
Example:
M
HTVALEXD16 03-11-22 11:09:22
0 COMPLD
"1-T1-MUX4-3,T1:M3C3RG0AAA:DSXSTATE=AUTOENABLE:OOS-AU FLT,AINS"
"1-T1-MUX4-3,T1:M3C3RG0AAA:DSXLINECODING=DSXB8ZS:OOS-AU FLT,AINS"
"1-T1-MUX4-3,T1:M3C3RG0AAA:DSXLINELENGTH=DSX0TO133:OOS-AU FLT,AINS"
"1-T1-MUX4-3,T1:M3C3RG0AAA:DSXSWITCHPROT=ENABLE:OOS-AU FLT,AINS"
"1-T1-MUX4-3,T1:M3C3RG0AAA:DSXLPBKDETECTION=DISABLE:OOS-AU FLT,AINS"
"1-T1-MUX4-3,T1:M3C3RG0AAA:LOOPBACK=DATAMODE:OOS-AU FLT,AINS"
"1-T1-MUX4-3,T1:M3C3RG0AAA:CKTID=T1/E1 #3:OOS-AU FLT,AINS"
;
Error Response
<cr> <lf> <lf>
^^^<rsphdr> <cr><lf>
M^^<CTAG> DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
5-5
MX2820 System TL1 Reference Guide
RTRV-TH-RR
The RTRV-TH-rr (Retrieve-Threshold) command instructs an NE to send the current threshold
level of one or more monitored parameters for which violation will trigger an automatic
message. These threshold levels can apply to one or more equipment units or facilities.
The MX2820 System supports the following rr modifiers:
• T1
• T3
• STS1
• VT1
Input Format
RTRV-TH-rr:[<tid>]:<aid>:[<ctag>][::[<montype>],[<locn>][,<tmper>]];
Example:
RTRV-TH-T1::1-T1-MUX6-1:::CVL-HT,NEND,1-DAY;
Input Parameters
TID
The “TID” on page 2-3 identifies the target NE for the command.
The TID should match the Source Identifier (SID) value
assigned to the NE, or be NULL. A NULL value matches the NE
processing the command. If not specified, a NULL value is
assigned.
AID
The AID indicates the entity or location of the entity within the
targeted NE. For applicable AIDs, refer to “Section 3, ADTRAN
AID Formats”.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
MONTYPE
The Monitoring Type (MONTYPE) parameter indicates the type
of PM threshold being retrieved.
The MONTYPE of a given threshold is the MONTYPE of the
associated performance monitoring value (refer to “Appendix F,
Performance Monitoring Codes”) with “-HT” appended to the
end. For example, the MONTYPE for the threshold for the T1
loss-of-signal is “LOSS-L-HT”.
5-6
LOCN
For the Location (LOCN), refer to “Appendix A, Input Commands
Data Dictionary” for additional information.
TMPER
For the Time Period (TMPER) parameter, refer to “Appendix A,
Input Commands Data Dictionary” for additional information.
61186003L1-35D
Section 5, Provisioning TL1 Commands - RTRV-TH-rr
Response Format
Normal Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^COMPLD <cr> <lf>
<rspblk> + ;
The <rspblk> has the following format:
^^^"<aid>[,<aidtype>]:<montype>,[<locn>],[<dirn>],<thlev>[,<tmper>]" <cr> <lf>
The normal response must contain at least one occurrence of <rspblk>. It is allowed to
contain multiple <rspblk>s if applicable.
Example:
M
HTVALEXD16 03-11-22 11:22:02
0 COMPLD
"1-T3-MUX4-1:CVL-HT,NEND,,387,15-MIN"
"1-T3-MUX4-1:UASCP-P-HT,NEND,,10,15-MIN"
"1-T3-MUX4-1:CVL-HT,NEND,,387,1-DAY"
"1-T3-MUX4-1:UASP-P-HT,NEND,,10,1-DAY"
;
Error Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^DENY <cr> <lf>
^^^<errcde> <cr> <lf>
(^^^"<error description>" <cr> <lf>) *
(^^^/*error text*/ <cr> <lf>) * ;
The (^^^"<error description>" <cr> <lf>) and (^^^/*error text*/ <cr> <lf>) error response
blocks are optional and, if desired, multiple repetitions are allowed.
Refer to “Appendix A, Input Commands Data Dictionary” for input parameter descriptions.
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
5-7
MX2820 System TL1 Reference Guide
SET-TH-RR
The SET-TH-rr (Set-Threshold) command instructs an NE to set the threshold level for a
monitored parameter that, when exceeded, can trigger an automatic message. The threshold
level can apply to one or more equipment units or facilities in the NE. Threshold setting for
multiple monitored parameters or time periods will require multiple commands from the OS.
The MX2820 System supports the following rr modifiers:
• T1
• T3
• STS1
• VT1
Input Format
SET-TH-rr:[<tid>]:<aid>:[<ctag>]::<montype>,<thlev>,<locn>,,<tmper>;
Example:
SET-TH-T1::1-T1-MUX6-1:::CVL-HT,5,NEND,,1-DAY;
Input Parameters
TID
The “TID” on page 2-3 identifies the target NE for the command.
The TID should match the Source Identifier (SID) value
assigned to the NE, or be NULL. A NULL value matches the NE
processing the command. If not specified, a NULL value is
assigned.
AID
The AID indicates the entity or location of the entity within the
targeted NE. For applicable AIDs, refer to “Section 3, ADTRAN
AID Formats”.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
MONTYPE
The MONTYPE parameter indicates the type of PM threshold
being retrieved.
The MONTYPE of a given threshold is the MONTYPE of the
associated performance monitoring value (refer to “Appendix F,
Performance Monitoring Codes”) with “-HT” appended to the
end. For example, the MONTYPE for the threshold for the T1
loss-of-signal is “LOSS-L-HT”.
5-8
THLEV
The Threshold Level (THLEV) parameter indicates the threshold
value that applies to the PM (MONTYPE) parameter. For
applicable values, refer to the “Transmission Entity Data
Parameter Tables” on page 5-10.
LOCN
For the LOCN, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
TMPER
For the TMPER parameter, refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
61186003L1-35D
Section 5, Provisioning TL1 Commands - SET-TH-rr
Response Format
Normal Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^COMPLD <cr> <lf>;
Example:
M
HTVALEXD16 03-11-22 11:35:28
0 COMPLD
Error Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^DENY <cr> <lf>
^^^<errcde> <cr> <lf>
(^^^"<error description>" <cr> <lf>) *
(^^^/*error text*/ <cr> <lf>) * ;
The (^^^"<error description>" <cr> <lf>) and (^^^/*error text*/ <cr> <lf>) error response
blocks are optional and, if desired, multiple repetitions are allowed.
Refer to “Appendix A, Input Commands Data Dictionary” for input parameter descriptions.
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
5-9
MX2820 System TL1 Reference Guide
TRANSMISSION ENTITY DATA PARAMETER TABLES
Table 5-1 through Table 5-9 provide the data parameters (attributes) that apply to the
<specific data block> field for the ED-rr and RTRV-rr commands.
For the MX2820 System, the supported rr modifiers are as follows:
• EQPT
• STS1
• T1
• T3
• VT1
Table 5-1. SCU (P/N 1186003Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-SCU
Parameter
Options
Description
ETH_LINK_STAT
DOWN
UP
ERROR
This read only parameters indicates the state of
the Ethernet link.
FAILURE_CNT
2-5
This read-only parameter is used to indicate how
many times a login has failed.
LOCKOUT_TIME
3 - 60
If a user is locked out, this read-only parameter
is used to indicate how many seconds the user
will remain locked out.
SSHKEYSIZE
512 - 2048 (1024)
This parameter indicates the size of current SSH
keys.
SSHGENSTAT
IDLE
RSA
DSS
This parameter indicates the current status of
SSH key generation.
ALARM_CHRON
DESCENDING
ASCENDING
This parameter sets the order alarms are
displayed in the alarm log.
AUTO_LOGOFF
DISABLE
ENABLE
This parameter enables/disables the auto logoff
functionality.
AUTO_LOGOFF_TIME
1 - 60 (30)
This parameter sets how long it takes for autologoff to kick in if it is enabled.
AUX1_COND_CODE
11-character string
(AUX1)
This parameter is the TL1 condition code for
AUX1.
AUX1_DESC
16-character string
(AUX #1 INPUT)
This parameter is the condition description of
AUX1.
Read Only
Read/Write
Note: Defaults are in bold type.
5-10
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-1. SCU (P/N 1186003Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-SCU (Continued)
Parameter
Options
Description
AUX1AID
1 - 16 (1)
This parameter sets the AID index for AUX1.
AUX1LOG
NORMOPEN
NORMCLOSED
This parameter sets the logic sense of the AUXx
alarm.
AUX1LVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameter sets the reported alarm level for
an AUX1 alarm.
AUX2_COND_CODE
11-character string
(AUX2)
This parameter is the TL1 condition code for
AUX2.
AUX2_DESC
16-character string
(AUX #2 INPUT)
This parameter is the condition description of
AUX2.
AUX2AID
1 - 16 (2)
This parameter sets the AID index for AUX2.
AUX2LOG
NORMOPEN
NORMCLOSED
This parameter sets the logic sense of the AUXx
alarm.
AUX2LVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameters sets the reported alarm level for
an AUX2 alarm.
AUX3A_COND_CODE
11-character string
(AUX3A)
This parameter is the TL1 condition code for
AUX3A.
AUX3A_DESC
16-character string
(AUX #3A INPUT)
This parameter is the condition description of
AUX3A.
AUX3AAID
1 - 16 (3)
This parameters sets the AID index for AUX3A.
AUX3LOG
NORMOPEN
NORMCLOSED
This parameter sets the logic sense of the AUXx
alarm.
AUX3ALVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameters sets the reported alarm level for
an AUX3A alarm.
AUX3B_COND_CODE
11-character string
(AUX3B)
This parameter is the TL1 condition code for
AUX3B.
AUX3B_DESC
16-character string
(AUX #3B INPUT)
This parameter is the condition description of
AUX3B.
AUX3BAID
1 - 16 (3)
This parameters sets the AID index for AUX3B.
Note: Defaults are in bold type.
61186003L1-35D
5-11
MX2820 System TL1 Reference Guide
Table 5-1. SCU (P/N 1186003Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-SCU (Continued)
Parameter
Options
Description
AUX3BLVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameters sets the reported alarm level for
an AUX3B alarm.
CRAFT_BAUD
9600
19200
38400
57600
115200
This parameter is used to set the craft port baud
rate.
ETH_ENABLE
DISABLE
ENABLE
This parameter allows the Ethernet port to be
enabled/disabled.
ETH_RATE
AUTO
10HALF
10FULL
100HALF
100FULL
This parameter is used to set the data rate for
the Ethernet port.
I-BANKMODE
HOST
CLIENT
This parameter selects whether the shelf will
serve as a client or host in the interbank communication protocol.
NSA_REM_LVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameters sets the reported alarm level for
a Non-Service Affecting card removal alarm.
PWRA_COND_CODE
11-character string
(PWRA)
This parameter is the TL1 condition code for
PWRA.
PWRAAID
1 - 16 (4)
This parameters sets the AID index for PWRA.
PWRALVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameters sets the reported alarm level for
a PWR A alarm.
PWRB_COND_CODE
11-character string
(PWRB)
This parameter is the TL1 condition code for
PWRB.
PWRBAID
1 - 16 (5)
This parameters sets the AID index for PWRB.
PWRBLVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameters sets the reported alarm level for
a PWR B alarm.
Note: Defaults are in bold type.
5-12
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-1. SCU (P/N 1186003Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-SCU (Continued)
Parameter
Options
Description
REM_LVL
INFO
ALERT
MINOR
MAJOR
CRITICAL
This parameters sets the reported alarm level for
a Service Affecting card removal alarm.
SS_ENABLE
DISABLE
ENABLE
This parameter allows Smart Start to be
enabled/disabled.
SSHGENSIZE
512 - 2048 (1024)
This parameter sets the size of SSH keys to
generate. The size must be a multiple of eight.
TRAP_ENABLE
DISABLE
ENABLE
This parameter allows SNMP traps to be
enabled/disabled.
GENERATE
This parameter initiates the generation of SSH
keys.
Write Only
SSHGENKEY
Note: Defaults are in bold type.
Table 5-2. DS3 MUX (P/N 1186002Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B)
Parameter
Options
Description
0 - 31
Bit assignments are as follows (where logic 1
indicates the condition is present and logic 0
indicates that the condition is not present):
Read Only
ALARMSEVERITY
Info = Bit 0 (LSB)
Alert = Bit 1
Minor = Bit 2
Major = Bit 3
Critical = Bit 4 (MSB)
APPSWCHECKSUM
4-character string
The application software checksum for the card.
APPSWVERSION
8-character string
The application software version for the card.
BOOTSWCHECKSUM
4-character string
The boot software checksum for the card.
BOOTSWVERSION
8-character string
The boot software version for the card.
DIAGBERTCOUNT
0 - 0xFFFFFFFF
This variable indicates the number of errors
accumulated during a BERT-type test.
DIAGBERTSYNC
NOSYNC
SYNC
This variable indicates the synchronization
status during a BERT-type test.
Note: Defaults are in bold type.
61186003L1-35D
5-13
MX2820 System TL1 Reference Guide
Table 5-2. DS3 MUX (P/N 1186002Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
PRODCLEICODE
11-character string
The ADTRAN product CLEI code for the card.
PRODSERIALNUMBER
25-character string
The ADTRAN product serial number for the card.
PRODUCTNAME
12-character string
The ADTRAN product name for the card.
PROTECTIONMODE
NONE
CIRCUIT
This variable indicates the protection mode of the
card.
SELFTEST
21-character string
The software self-test results for the card.
SLOTUPTIME
0 - 0xFFFFFFFF
The time (in hundredths of a second) since the
card was powered up.
SWITCHCOUNT
0 - 255
This variable returns the current protection
switch count that is used as a basis for the Max
Switch Threshold alarm.
ACTIVECARD
CARDA
CARDB
This variable sets/indicates the active module in
the module pair.
AUTOSAVE
DISABLE
ENABLE
This variable is used when configuring the Autosave feature. When enabled, the provisioning is
automatically saved to non-volatile memory in
response to a change in provisioning.
CARDPAIRID
12-character string
(MX2820 M13)
This variable is used to identify a particular
module pair.
DIAGSELECTBERTPATT
QRSS
ALL1
ALL0
TWOINEIGHT
ONEINEIGHT
TWOTOFIFTEENTHINV
This variable indicates the number of errors
accumulated during a BERT-type test.
Read/Write
Note: Defaults are in bold type.
5-14
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-2. DS3 MUX (P/N 1186002Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
DIAGSELECTBERTPATT
(1186002L3 Only)
ALL1
ALL0
TWOINEIGHT
ONEINEIGHT
QRSS
SIXTYTHREE
FIVEELEVEN
TWENTYFORTYSEVEN
TWOTOFIFTEENTHINV
TWOTOTWENTIETH
TWOTOTWENTYTHIRD
This variable indicates the number of errors
accumulated during a BERT-type test.
DIAGTIMEOUT
DISABLE
ONEMIN
FIVEMIN
TENMIN
FIFTEENMIN
THIRTYMIN
FORTYFIVEMIN
ONEHOUR
This variable indicates the amount of time that a
loopback will remain in effect before automatic
release of the loopback occurs.
DSXAUTOENABLEDELAY
TWOSEC
ONEHR
TWOHRS
TWELVEHRS
ONEDAY
TWODAYS
SEVENDAYS
This variable sets the delay associated with any
auto-enabled DS1/E1 interface.
DSXCVTHRESHOLD
DISABLE
ONEE3
ONEE4
ONEE5
ONEE6
This variable sets the DS1/E1 code violation
threshold that, when exceeded, invokes a protection switch to the standby card.
DSXMULTCKTPROT
DISABLE
ENABLE
This variable is used when configuring the circuit
protection setting of multiple DS1/E1 ports. This
variable is temporary storage for the desired
circuit protection setting. This setting is applied
to all DS1/E1 ports within the range with
APPLYMULTCKTPROT.
Note: Defaults are in bold type.
61186003L1-35D
5-15
MX2820 System TL1 Reference Guide
Table 5-2. DS3 MUX (P/N 1186002Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
DSXMULTFRMDETECT
(1186002L3 Only)
AUTO
SF
ESF
UNFRAMED
This variable is used when configuring the
framing detection setting of multiple DS1 ports.
This variable is temporary storage for the
framing detection setting. This setting is applied
to all DS1 ports within the range with APPLYMULTFRMDETECT.
DSXMULTLINECODING
AMI
B8ZSHDB3
This variable is used when configuring the line
coding setting of multiple DS1/E1 ports. This
variable is temporary storage for the desired line
coding setting. This setting is applied to all DS1/
E1 ports within the range with APPLYMULTLINECODING.
DSXMULTLINELENGTH
DSX0TO133
DSX133TO266
DSX266TO399
DSX399TO533
DSX533TO655
This variable is used when configuring the line
length setting of multiple DS1/E1 ports. This
variable is temporary storage for the desired line
length setting. This setting is applied to all DS1
ports within the range with APPLYMULTLINELENGTH.
DSXMULTLPBKDETECT
DISABLE
CSU
NIU
This variable is used when configuring the
loopback detection setting of multiple DS1/E1
ports. This variable is temporary storage for the
desired loopback detection setting. This setting is
applied to all DS1 ports within the range with
APPLYMULTLPBKDETECT.
DSXMULTPRVSVSTATE
IS
OOS
This variable is used when configuring the provisioned service state of multiple DS1/E1 facilities.
This variable is temporary storage for the desired
service state setting. This setting is applied to all
DS1 facilities within the range with APPLYMULTSERVSTATE.
DSXMULTSTATE
DISABLE
ENABLE
AUTOENABLE
This variable is used when configuring the state
setting of multiple DS1/E1 ports. This variable is
temporary storage for the desired state setting.
This setting is applied to all DS1/E1 ports within
the range with APPLYMULTSTATE.
DSXPROTTHRESHOLD
1 - 28 (1)
This variable sets the minimum number of DS1/
E1 channels that must fail before an automatic
protection switch is invoked.
ENDRANGE
1 - 28 (28)
This variable is used when configuring multiple
DS1/E1 ports. This variable is the end port of
the range, and must be greater than or equal to
the STARTRANGE value.
Note: Defaults are in bold type.
5-16
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-2. DS3 MUX (P/N 1186002Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
EQPTPRVSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the Equipment entity.
IPFWDMTU
MTU260
MTU1500
This variable controls the IP MTU used for the IP
forwarding channel. This should be set to the
default of 260 bytes in most cases.
IPFWDPROTO
ADTRAN
PPP
This variable controls the encapsulation protocol
used to carry IP traffic over the DS3 when IP
forwarding is in use.
MAXNUMSWITCHES
1 - 24 (3)
This variable sets the maximum number of
protection switches allowed within a 1 hour
period. If the threshold is met, then the unit
issues an alarm and suppresses automatic
protection switches for the next 24 hours.
MINSWITCHPERIOD
0 - 3600 (10)
This variable sets the minimum number of
seconds allowed between automatic protection
switches.
STARTRANGE
1 - 28 (1)
This variable is used when configuring multiple
DS1/E1 ports. This variable is the beginning
port of the range, and must be less than or equal
to the ENDRANGE value.
Write Only (Used to initiate an operation)
APPLYMULTCKTPROT
1
a variable to apply the setting of DSXMULTCKTPROT to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE
APPLYMULTDSXSVSTATE
1
This variable applies the setting of DSXMULTPRVSERVSTATE to all DS1/E1 ports within the
range indicated by STARTRANGE and
ENDRANGE.
APPLYMULTFRMDETECT
1
This variable applies the setting of DSXMULTIFRMDETECT to all DS1 ports within the range
indicated by STARTRANGE AND ENDRANGE.
APPLYMULTLINECODING
1
This variable applies the setting of DSXMULTLINECODING to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE.
APPLYMULTLINELENGTH
1
This variable applies the setting of DSXMULTLINELENGTH to all DS1/E1 ports within the
range indicated by STARTRANGE and
ENDRANGE.
APPLYMULTLPBKDETECT
1
This variable applies the setting of DSXMULTLPBKDETECT to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE.
(1186002L3 Only)
Note: Defaults are in bold type.
61186003L1-35D
5-17
MX2820 System TL1 Reference Guide
Table 5-2. DS3 MUX (P/N 1186002Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
APPLYMULTSTATE
1
This variable applies the setting of DSXMULTSTATE to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE.
CARDRESET
1
Setting this variable forces the card to reboot.
CLEARALLSTATS
1
This variable clears all DS3 and DS1/E1 PM
statistics.
CLEARSWITCHCOUNT
1
Setting this variable will reset to zero the protection switch count that is used as a basis for the
Max Switch Threshold alarm. A read on this
variable always returns a One.
DEFAULTALLTHRESH
1
This variable restores all DS3 and DS1/E1 PM
thresholds to their default values.
DIAGCLEARBERTCOUNT
1
Setting this variable clears the error count
during a BERT-type test.
DIAGINSERTBERTERR
1
Setting this variable inserts one bit error into an
active BERT pattern.
DIAGRESETTESTS
1
Setting this variable releases all loopbacks
currently activated.
DISABLEALLTHRESH
1
This variable disables all DS3 and DS1/E1 PM
thresholds.
ENABLEALLTHRESH
1
This variable enables all DS3 and DS1/E1 PM
thresholds.
LOADFACTORYDEFAULT
1
The card's default provisioning data will be
loaded when this variable is set.
SAVEPROV
1
This setting saves the current provisioning data
to non-volatile memory.
Note: Defaults are in bold type.
5-18
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-3. DS3 MUX (P/N 1186002Lx) T3 Data Provisioning Parameters
AID: 1-T3-(MUX1-MUX9)-1
Parameter
Options
Description
DS3RXFRAMING
CBIT
M13
This variable indicates the framing mode
detected on the received DS3 of the card.
DS3STATE
NORMAL
ALARM
TEST
ALARMANDTEST
This variable indicates the alarm/test state of the
DS3 interface of the card.
FEFACILITYID
38-character string
(N/A)
The far-end (remote) Facility ID Code received
from the incoming DS3.
FELOCATIONID
11-character string
(N/A)
The far-end (remote) Location ID Code received
from the incoming DS3.
FEFRAMEID
10-character string
(N/A)
The far-end (remote) Frame ID Code received
from the incoming DS3.
FEUNITID
6-character string
(N/A)
The far-end (remote) Unit ID Code received from
the incoming DS3.
FEEQPTID
10-character string
(N/A)
The far-end (remote) Equipment ID Code received
from the incoming DS3.
DS3FRAMING
CBIT
M13
This variable sets the framing mode of the DS3 of
the card. The choice of framing mode affects the
interpretation of the usage and error statistics.
DS3LPBKDETECTION
DISABLE
FEACORCBIT
FEAC
CBIT
This variable sets the out-of-band loopback
command(s) to which the card will respond.
DS3CVTHRESHOLD
DISABLE
ONEE3
ONEE4
ONEE5
ONEE6
This variable sets the DS3 code violation threshold that, when exceeded, sets an associated
alarm.
DS3TIMING
LOOP
LOCAL
This variable sets the transmit-timing mode of
the DS3 interface.
LOOPBACK
DATAMODE
LINE
DIGITAL
FENDLINE
ALLT1
This variable indicates the test state of the DS3
interface.
NETPRVSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the DS3 facility.
Read Only
Read/Write
Note: Defaults are in bold type.
61186003L1-35D
5-19
MX2820 System TL1 Reference Guide
Table 5-3. DS3 MUX (P/N 1186002Lx) T3 Data Provisioning Parameters
AID: 1-T3-(MUX1-MUX9)-1 (Continued)
Parameter
Options
Description
NEFACILITYID
38-character string
(N/A)
The near-end (local) Facility ID Code transmitted
from the DS3 when C-BIT framing is used.
NELOCATIONID
11-character string
(N/A)
The near-end (local) Location ID Code transmitted from the DS3 when C-BIT framing is used.
NEFRAMEID
10-character string
(N/A)
The near-end (local) Frame ID Code transmitted
from the DS3 when C-BIT framing is used.
NEUNITID
6-character string
(N/A)
The near-end (local) Unit ID Code transmitted
from the DS3 when C-BIT framing is used.
NEEQPTID
10-character string
(N/A)
The near-end (local) Equipment ID Code transmitted from the DS3 when C-BIT framing is
used.
Write Only (Used to initiate an operation)
CLEARNETSTATS
1
This variable clears all DS3 PM statistics.
Note: Defaults are in bold type.
Table 5-4. DS3 MUX (P/N 1186002Lx) T1 Data Provisioning Parameters
AID: 1-T1-(MUX1-MUX9)-(1-28)
Parameter
Options
Description
DSXSTATUS
OFF
OK
LOS
BPV
TEST
HOT
XCV
CAIS
LAIS
AUTO
NA
This variable indicates the status of a T1/E1
interface (consistent with what is indicated in the
VT-100 Status menu).
DSXBERTSYNCMULT
(1186002L3 Only)
NOSYNC
SYNC
UNAVAILABLE
This variable indicates the synchronization
status during a BERT-type test.
DSXBERTCOUNTMULT
0-0xFFFFFFFF
This variable indicates the number of errors
accumulated during a BERT-type test.
Read Only
(1186002L3 Only)
Note: Defaults are in bold type.
5-20
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-4. DS3 MUX (P/N 1186002Lx) T1 Data Provisioning Parameters
AID: 1-T1-(MUX1-MUX9)-(1-28) (Continued)
Parameter
Options
Description
DSXSTATE
DISABLE
ENABLE
AUTOENABLE
UNAVAILABLE
This variable sets the state of a DS1/E1
interface.
DSXLINECODING
DSXAMI
DSXB8ZS
E1AMI
E1HDB3
UNAVAILABLE
This variable sets the line coding of a DS1/E1
interface.
DSXLINELENGTH
DSX0TO133
DSX133TO266
DSX266TO399
DSX399TO533
DSX533TO655
E10TO6DB
UNAVAILABLE
This variable sets the line length setting of the
DS1/E1 interface.
DSXSWITCHPROT
DISABLE
ENABLE
UNAVAILABLE
This variable enables or disables an automatic
protection switch due to a failure of the DS1/E1
interface.
DSXLPBKDETECTION
DISABLE
CSU
NIU
UNAVAILABLE
This variable enables or disables the detection
and response to CSU/NIU loopback commands
received from the network.
DSXFRMDETECTION
AUTO
SF
ESF
UNFRAMED
UNAVAILABLE
This variable sets the framing detection of a DS1
interface.
Read/Write
(1186002L3 Only)
Note: Defaults are in bold type.
61186003L1-35D
5-21
MX2820 System TL1 Reference Guide
Table 5-4. DS3 MUX (P/N 1186002Lx) T1 Data Provisioning Parameters
AID: 1-T1-(MUX1-MUX9)-(1-28) (Continued)
Parameter
Options
Description
LOOPBACK
DATAMODE
NETWORK
TERMINAL
DIGITAL
CODEC
DS1FEAC
CSULBK
CSUBERT
LINEBERT
UNAVAILABLE
NIULBK
NIUBERT
HSCSULBK
HSCSUBERT
HSLINEBERT
HSNIULBK
HSNIUBERT
This variable indicates the test state of a DS1/E1
interface.
T1PRVSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the T1 facility.
1
This variable clears all DS1/E1 PM statistics.
Write Only
CLEARPORTSTATS
Note: Defaults are in bold type.
Table 5-5. STS-1 MUX (P/N 1186005Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B)
Parameter
Options
Description
0 - 31
This variable indicates the severity of current
active system alarms of the card. Bit assignments
are as follows (where logic 1 indicates the condition is present and logic 0 indicates that the
condition is not present):
Read Only
ALARMSEVERITY
Info = Bit 0 (LSB)
Alert = Bit 1
Minor = Bit 2
Major = Bit 3
Critical = Bit 4 (MSB)
PROTECTIONMODE
NONE
CIRCUIT
This variable indicates the protection mode of the
card.
APPSWVERSION
8-character string
The application software version for the card.
Note: Defaults are in bold type.
5-22
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-5. STS-1 MUX (P/N 1186005Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
APPSWCHECKSUM
4-character string
The application software checksum for the card.
BOOTSWVERSION
8-character string
The boot software version for the card.
BOOTSWCHECKSUM
4-character string
The boot software checksum for the card.
SELFTEST
21-character string
The software self-test results for the card.
DIAGBERTSYNC
NOSYNC
SYNC
This variable indicates the synchronization
status during a BERT-type test.
DIAGBERTCOUNT
0 - 0xFFFFFFFF
This variable indicates the number of errors
accumulated during a BERT-type test.
SLOTUPTIME
0 - 0xFFFFFFFF
The time (in hundredths of a second) since the
card was powered up.
PRODUCTNAME
12-character string
The ADTRAN product name for the card.
PRODCLEICODE
11-character string
The ADTRAN product CLEI code for the card.
PRODSERIALNUMBER
25-character string
The ADTRAN product serial number for the card.
EXTCLKSTATUS
PRESENT
NOTPRESENT
This variable indicates whether this module
detects the external clock from the clock module.
SWITCHCOUNT
0 - 255
This variable returns the current protection
switch count that is used as a basis for the Max
Switch Threshold alarm.
ACTIVECARD
CARDA
CARDB
This variable sets/indicates the active module in
the module pair.
MAXNUMSWITCHES
1 - 24 (3)
This variable sets the maximum number of
protection switches allowed within a 1 hour
period. If the threshold is met, then the unit
issues an alarm and suppresses automatic
protection switches for the next 24 hours.
MINSWITCHPERIOD
0 - 3600 (10)
This variable sets the minimum number of
seconds allowed between automatic protection
switches.
DSXCVTHRESHOLD
DISABLE
ONEE3
ONEE4
ONEE5
ONEE6
This variable sets the DS1/E1 code violation
threshold that, when exceeded, invokes a protection switch to the standby card.
DSXPROTTHRESHOLD
1 - 28 (1)
This variable sets the minimum number of DS1/
E1 channels that must fail before an automatic
protection switch is invoked.
Read/Write
Note: Defaults are in bold type.
61186003L1-35D
5-23
MX2820 System TL1 Reference Guide
Table 5-5. STS-1 MUX (P/N 1186005Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
DSXAUTOENABLE-DELAY
TWOSEC
ONEHR
TWOHRS
TWELVEHRS
ONEDAY
TWODAYS
SEVENDAYS
This variable sets the delay associated with any
auto-enabled DS1/E1 interface.
STARTRANGE
1 - 28 (1)
This variable is used when configuring multiple
VT paths or DS1/E1 ports. This variable is the
beginning port of the range, and must be less
than or equal to the ENDRANGE value.
ENDRANGE
1 - 28 (28)
This variable is used when configuring multiple
VT paths or DS1/E1 ports. This variable is the
end port of the range, and must be greater than
or equal to the STARTRANGE value.
DSXMULTSTATE
DISABLE
ENABLE
AUTOENABLE
This variable is used when configuring the state
setting of multiple DS1/E1 ports. This variable is
temporary storage for the desired state setting.
This setting is applied to all DS1/E1 ports within
the range with APPLYMULTSTATE.
DSXMULTLINECODING
AMI
B8ZSHDB3
This variable is used when configuring the line
coding setting of multiple DS1/E1 ports. This
variable is temporary storage for the desired line
coding setting. This setting is applied to all DS1/
E1 ports within the range with APPLYMULTLINECODING.
DSXMULTLINELENGTH
DSX0TO133
DSX133TO266
DSX266TO399
DSX399TO533
DSX533TO655
This variable is used when configuring the line
length setting of multiple DS1 ports. This
variable is temporary storage for the desired line
length setting. This setting is applied to all DS1
ports within the range with APPLYMULTLINELENGTH.
DSXMULTCKTPROT
DISABLE
ENABLE
This variable is used when configuring the circuit
protection setting of multiple DS1/E1 ports. This
variable is temporary storage for the desired
circuit protection setting. This setting is applied
to all DS1/E1 ports within the range with APPLYMULTCKTPROT.
DSXMULTLPBK-DETECT
DISABLE
CSU
NIU
This variable is used when configuring the
loopback detection setting of multiple DS1 ports.
This variable is temporary storage for the desired
loopback detection setting. This setting is applied
to all DS1 ports within the range with APPLYMULTLPBKDETECT.
Note: Defaults are in bold type.
5-24
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-5. STS-1 MUX (P/N 1186005Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
MULTVTHAIRPIN
DISABLE
ENABLE
This variable is used when configuring the VT
hairpin loopback setting of multiple VT paths.
This variable is temporary storage for the desired
loopback setting. This setting is applied to all VT
paths within the range with APPLYMULTVTHAIRPIN.
DSXMULTPRVSVSTATE
IS
OOS
This variable is used when configuring the provisioned service state of multiple DS1 facilities.
This variable is temporary storage for the desired
service state setting. This setting is applied to all
DS1 facilities within the range with APPLYMULTDSXSVSTATE.
VTMULTPRVSVSTATE
IS
OOS
This variable is used when configuring the provisioned service state of multiple VT path entities.
This variable is temporary storage for the desired
service state setting. This setting is applied to all
VT paths within the range with APPLYMULTVTSVSTATE.
DIAGTIMEOUT
DISABLE
ONEMIN
FIVEMIN
TENMIN
FIFTEENMIN
THIRTYMIN
FORTYFIVEMIN
ONEHOUR
This variable indicates the amount of time that a
loopback will remain in effect before automatic
release of the loopback occurs.
AUTOSAVE
DISABLE
ENABLE
This variable is used when configuring the Autosave feature. When enabled, the provisioning is
automatically saved to non-volatile memory when
a change in provisioning occurs.
CARDPAIRID
12-character string
(MX2820 STS1)
This variable is used to identify a particular
module pair.
EQPTPRVSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the Equipment entity.
VTAISTRANSMIT
DISABLE
ENABLE
This variable enables or disables transmission of
VT AIS toward the network.
Write Only (Used to initiate an operation)
APPLYMULTSTATE
1
This variable applies the setting of DSXMULTSTATE to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE.
Note: Defaults are in bold type.
61186003L1-35D
5-25
MX2820 System TL1 Reference Guide
Table 5-5. STS-1 MUX (P/N 1186005Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
APPLYMULTLINE-CODING
1
This variable applies the setting of DSXMULTLINECODING to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE.
APPLYMULTLINELENGTH
1
This variable applies the setting of DSXMULTLINELENGTH to all DS1/E1 ports within the
range indicated by STARTRANGE and
ENDRANGE.
APPLYMULTCKTPROT
1
This variable applies the setting of DSXMULTCKTPROT to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE.
APPLYMULTLPBKDETECT
1
This variable applies the setting of DSXMULTLPBKDETECT to all DS1/E1 ports within the range
indicated by STARTRANGE and ENDRANGE.
APPLYMULTVTHAIRPIN
1
This variable applies the setting of MULTVTHAIRPIN to all VT paths within the range indicated by
STARTRANGE and ENDRANGE.
APPLYMULTVTSV-STATE
1
This variable applies the setting of VTMULTPRVSVSTATE to all VT paths within the range
indicated by STARTRANGE and ENDRANGE.
APPLYMULTDSXSVSTATE
1
This variable applies the setting of DSXMULTPRVSVSTATE to all DS1/E1 ports within the
range indicated by STARTRANGE and
ENDRANGE.
LOADFACTORYDEFAULT
1
The card's default provisioning data will be
loaded when this variable is set.
SAVEPROV
1
This setting saves the current provisioning data
to non-volatile memory.
CARDRESET
1
Setting this variable forces the card to reboot.
CLEARSWITCHCOUNT
1
Setting this variable will reset to zero the protection switch count that is used as a basis for the
Max Switch Threshold alarm. A read on this
variable always returns a One.
DIAGCLEARBERTCOUNT
1
Setting this variable clears the error count during
a BERT-type test.
DIAGRESETTESTS
1
Setting this variable releases all current active
loopbacks.
DIAGINSERTBERTERR
1
Setting this variable inserts one bit error into an
active BERT pattern.
DEFAULTALLTHRESH
1
This variable restores all STS-1, VT, and DS1/E1
PM thresholds to their default values.
Note: Defaults are in bold type.
5-26
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-5. STS-1 MUX (P/N 1186005Lx) EQPT Data Provisioning Parameters
AID:1-EQPT-(MUX1-MUX9)-(A or B) (Continued)
Parameter
Options
Description
ENABLEALLTHRESH
1
This variable enables all STS-1, VT, and DS1/E1
PM thresholds.
DISABLEALLTHRESH
1
This variable disables all STS-1, VT, and DS1/E1
PM thresholds.
CLEARALLSTATS
1
This variable clears all STS-1, VT, and DS1/E1
PM
statistics.
Note: Defaults are in bold type.
Table 5-6. STS-1 MUX (P/N 1186005Lx) STS-1 Data Provisioning Parameters
AID: 1-STS1-(MUX1-MUX9)-1
Parameter
Options
Description
NETSTATE
NORMAL
ALARM
TEST
ALARMANDTEST
This variable indicates the alarm/test state of the
EC-1/STS-1 interface of the card.
PATHTRACERX
64-character string
The path trace string received from the incoming
STS-1.
CLKSOURCE
LOOP
FREE-RUN
EXTERNAL
The current timing source of the transmit timing
mode of the EC-1/STS-1 interface. The value of
this parameter can or can not be the same as
that of the NETTIMING parameter.
EXTCLKSYNCSTATUS
STU
PRS
TNC
ST2
ST3
SMC
PNO
DUS
NOTAVAILABLE
This variable indicates the clock sync status
message decoded from the incoming STS-1
signal.
PATHTRACETX
64-character string
(ADTRAN MX2820
STS-1 MUX)
The path trace string transmitted from the outgoing STS-1.
PATHTRACERXEXP
64-character string
(ADTRAN MX2820
STS-1 MUX)
The path trace string expected to be detected in
the received STS-1.
Read Only
Read/Write
Note: Defaults are in bold type.
61186003L1-35D
5-27
MX2820 System TL1 Reference Guide
Table 5-6. STS-1 MUX (P/N 1186005Lx) STS-1 Data Provisioning Parameters
AID: 1-STS1-(MUX1-MUX9)-1 (Continued)
Parameter
Options
Description
NETTIMING
LOOP
FREE-RUN
EXTERNAL
This variable sets the transmit-timing mode of
the EC-1/STS-1 interface.
LOOPBACK
DATAMODE
LINE
DIGITAL
This variable indicates the test state of the EC-1/
STS-1 interface.
VTMODE
T1
E1
This variable is used when configuring the VT
mode of the module (T1 or E1).
NETPRVSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the EC1/STS-1 facility.
VTMAPPINGMULTSEQ
1
This setting configures the VT cross-connect for
sequential (TR-253) mapping.
VTMAPPINGMULTGRP
1
This setting configures the VT cross-connect for
group (M13) mapping.
PATHTRACEMATCH
1
This item sets the string value for PATHTRACERXEXP equal to the current value for
PATHTRACERX.
CLEARNETSTATS
1
This variable clears all STS-1 PM statistics.
Write-Only
Note: Defaults are in bold type.
Table 5-7. STS-1 MUX (P/N 1186005Lx) VT Data Provisioning Parameters
AID: 1-VT1-(MUX1-MUX9)-(1-28)
Parameter
Options
Description
Read/Write
VTMAPPING
1 - 29
This setting maps the indicated VT to the
indicated DS1/E1 port. The value of this parameter indicates the DS1/E1 port mapped to the VT
path. The value can be 1-28, or 29 for
Unequipped.
VTHAIRPIN
DISABLE
ENABLE
UNAVAILABLE
This setting configures the VT hairpin loopback
setting of a VT path.
VTPRVSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the VT path entity.
Note: Defaults are in bold type.
5-28
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-8. STS-1 MUX (P/N 1186005Lx) T1 Data Provisioning Parameters
AID: 1-T1-(MUX1-MUX9)-(1-28)
Parameter
Options
Description
DSXSTATE
DISABLE
ENABLE
AUTOENABLE
UNAVAILABLE
NOT MAPPED
This variable sets the state of a DS1/E1
interface.
DSXLINECODING
DSXAMI
DSXB8ZS
E1AMI
E1HDB3
UNAVAILABLE
NOT MAPPED
This variable sets the line coding of a DS1/E1
interface.
DSXLINELENGTH
DSX0TO133
DSX133TO266
DSX266TO399
DSX399TO533
DSX533TO655
E10TO6DB
UNAVAILABLE
NOT MAPPED
This variable sets the line length setting of the
DS1/E1 interface.
DSXSWITCHPROT
DISABLE
ENABLE
UNAVAILABLE
NOT MAPPED
This variable enables or disables an automatic
protection switch due to a failure of the DS1/E1
interface.
DSXLPBKDETECTION
DISABLE
CSU
NIU
UNAVAILABLE
NOT MAPPED
This variable enables or disables the detection
and response to CSU/NIU loopback commands
received from the network.
LOOPBACK
DATAMODE
NETWORK
TERMINAL
DIGITAL
CODEC
CSULBK
CSUBERT
VTBERT
LINEBERT
UNAVAILABLE
This variable indicates the test state of a DS1/E1
interface.
T1PRVSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the T1 facility.
1
This variable clears all PM statistics for this
DS1/E1 and for the attached VT.
Write Only
CLEARPORTSTATS
Note: Defaults are in bold type.
61186003L1-35D
5-29
MX2820 System TL1 Reference Guide
Table 5-9. Clock Card (P/N 1186004Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-CLK-(A or B)
Parameter
Options
Description
Read Only
ALARMSEVERITY
0 - 31
This variable indicates the severity of current
active system alarms of the card. Bit assignments are as follows (where logic 1 indicates the
condition is present and logic 0 indicates that the
condition is not present):
Info = Bit 0 (LSB)
Alert = Bit 1
Minor = Bit 2
Major = Bit 3
Critical = Bit 4 (MSB)
PROTECTIONMODE
NONE
CIRCUIT
This variable indicates the protection mode of the
card.
APPSWVERSION
8-character string
The application software version for the card.
APPSWCHECKSUM
4-character string
The application software checksum for the card.
BOOTSWVERSION
8-character string
The boot software version for the card.
BOOTSWCHECKSUM
4-character string
The boot software checksum for the card.
SELFTEST
21-character string
The software self-test results for the card.
SLOTUPTIME
0 - 0xFFFFFFFF
The time (in hundredths of a second) since the
card was powered up.
PRODUCTNAME
12-character string
The ADTRAN product CLEI code for the card.
PRODCLEICODE
11-character string
The ADTRAN product CLEI code for the card.
PRODSERIALNUMBER
25-character string
The ADTRAN product serial number for the card.
CLOCKSTATE
FREEWALKFAST
FREEWALK
EXITHOFAST
EXITHOLDOVER
HOLDOVER
NORMAL
FASTSTATE
RESETSTATE
This request returns the current state of the
clock card phase lock loop.
SWITCHCOUNT
0 - 255
This variable returns the current protection
switch count that is used as a basis for the Max
Switch Threshold alarm.
CARDA
CARDB
This variable sets/indicates the active module in
the module pair.
Read/Write
ACTIVECARD
Note: Defaults are in bold type.
5-30
61186003L1-35D
Section 5, Provisioning TL1 Commands - Transmission Entity Data Parameter Tables
Table 5-9. Clock Card (P/N 1186004Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-CLK-(A or B) (Continued)
Parameter
Options
Description
CARDPAIRID
12-character string
(MX2820 SMC)
This variable is used to identify a particular
module pair.
PRVACTIVEREF
PRIMARY
SECONDARY
This variable sets the active card in a redundant
system.
MAXNUMSWITCHES
1 - 24 (3)
This variable sets the maximum number of
protection switches allowed within a 1 hour
period. If the threshold is met, then the unit
issues an alarm and suppresses automatic
protection switches for the next 24 hours.
MINSWITCHPERIOD
0 - 3600 (10)
This variable sets the minimum number of
seconds allowed between automatic protection
switches.
AUTOSAVE
DISABLE
ENABLE
This variable is used when configuring the Autosave feature. When enabled, the provisioning is
automatically saved to non-volatile memory
when a change in provisioning occurs.
PRVEQUIPSERVSTATE
IS
OOS
This variable sets the provisioned service state of
the Equipment entity.
AUTOREFSWITCH
ENABLE
DISABLE
This variable is used to enable or disable
automatic clock reference protection switching.
AUTOCARDSWITCH
ENABLE
DISABLE
This variable is used to enable or disable
automatic card protection switching.
TIMINGMODE
EXTERNAL
HOLDOVER
This variable sets the clock card to synchronize
to either of the external clock references or
operate in hold over.
TIMINGTYPE
SFESF
ALLONES
This variable enables and disabled AIS detection
on the incoming clock references. It can be used
for debugging purposes.
TERMINATIONMODE
ENABLE
DISABLE
This variable specifies if the clock card pair will
provide line termination for the incoming bits
clock inputs or if another timing destination will
be responsible for termination.
PRICLKALARM
ENABLE
DISABLE
This variable sets whether the Primary Clock
reference
failure alarm is enabled or disabled (inhibited).
SECCLKALARM
ENABLE
DISABLE
This variable sets whether the Secondary Clock
reference
failure alarm is enabled or disabled (inhibited).
Note: Defaults are in bold type.
61186003L1-35D
5-31
MX2820 System TL1 Reference Guide
Table 5-9. Clock Card (P/N 1186004Lx) EQPT Data Provisioning Parameters
AID: 1-EQPT-CLK-(A or B) (Continued)
Parameter
Options
Description
Write Only (Used to initiate an operation)
LOADFACTORY-DEFAULT
1
The card's default provisioning data will be
loaded when this variable is set.
CARDRESET
1
Setting this variable forces the card to reboot.
SAVEPROV
1
This setting saves the current provisioning data
to non-volatile memory.
CLEARSWITCHCOUNT
1
Setting this variable will reset to zero the protection switch count that is used as a basis for the
Max Switch Threshold alarm.
Note: Defaults are in bold type.
5-32
61186003L1-35D
Section 6
Security TL1 Commands
INTRODUCTION
The Security TL1 commands allow an administrator to delete, edit, enter (add), and retrieve
security information for a user account. The following Security TL1 commands apply to the
MX2820 System:
• “DLT-USER-SECU” on page 6-2
• “ED-USER-SECU” on page 6-4
• “ENT-USER-SECU” on page 6-6
• “RTRV-USER-SECU” on page 6-8
61186003L1-35D
6-1
MX2820 System TL1 Reference Guide
DLT-USER-SECU
The DLT-USER-SECU (Delete-User-Security) command allows an administrator to delete the
security parameters associated with a user account.
Minimum User Access Privilege
ADMIN
Input Format
DLT-USER-SECU:[<TID>]:<UID>:[<CTAG>];
Example:
DLT-USER-SECU:HTVLALEXD16:USER1:8;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
UID
The UID indicates the User ID or logon name for the user. The
UID takes the place of the AID for this TL1 command format.
Refer to “Appendix A, Input Commands Data Dictionary” for
additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 8
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^COMPLD <cr> <lf>
;
<cr>
<lf>
Example:
M
;
6-2
HTVLALEXD16
8 COMPLD
02-06-04
09:03:52
61186003L1-35D
Section 6, Security TL1 Commands - DLT-USER-SECU
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
<cr>
<lf>
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
6-3
MX2820 System TL1 Reference Guide
ED-USER-SECU
The ED-USER-SECU (Edit-User-Security) command allows an administrator to edit security
parameters associated with a user account.
Minimum User Access Privilege
ADMIN
Input Format
ED-USER-SECU:[<TID>]:<UID>:[<CTAG>]::,[<NEW PID>],,[<NEW UAP>]:;
Example:
ED-USER-SECU:HTVLALEXD16:USER1:10::,PASSWORD2,,4:;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
UID
The UID indicates the User ID or logon name for the user. The
UID takes the place of the AID for this TL1 command format.
Refer to “Appendix A, Input Commands Data Dictionary” for
additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
NEW PID
For the new PID, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
NEW UAP
For the new User Access Privilege (UAP), refer to “Appendix A,
Input Commands Data Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 10
<
6-4
61186003L1-35D
Section 6, Security TL1 Commands - ED-USER-SECU
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^COMPLD <cr> <lf>
;
<cr>
<lf>
Example:
M
;
HTVLALEXD16
10 COMPLD
02-06-04
15:53:41
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^<CTAG>^DENY <cr> <lf>
^^^<error_code>
;
<cr>
<lf>
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
6-5
MX2820 System TL1 Reference Guide
ENT-USER-SECU
The ENT-USER-SECU (Enter-User-Security) command allows an administrator to enter (add)
security parameters to a user account. The command assigns a user ID, a password, and a
user access privilege for a new user to the MX2820 System.
Minimum User Access Privilege
ADMIN
Input Format
ENT-USER-SECU:[<TID>]:<UID>:[<CTAG>]::<PID>,,<UAP>:;
Example:
ENT-USER-SECU:HTVLALEXD16:USER1:12::PASSWORD1,,3:;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
UID
The UID indicates the User ID or logon name for the user. The
UID takes the place of the AID for this TL1 command format.
Refer to “Appendix A, Input Commands Data Dictionary” for
additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
PID
For the PID, refer to “Appendix A, Input Commands Data Dictionary” for additional information.
UAP
For the UAP, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 12
<
6-6
61186003L1-35D
Section 6, Security TL1 Commands - ENT-USER-SECU
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^COMPLD <cr> <lf>
;
<cr>
<lf>
Example:
M
;
HTVLALEXD16
12
COMPLD
02-06-04
15:37:00
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
<cr>
<lf>
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
6-7
MX2820 System TL1 Reference Guide
RTRV-USER-SECU
The RTRV-USER-SECU (Retrieve-User-Security) command allows an administrator to retrieve
security parameters, except for the user's password, associated with a user account.
Minimum User Access Privilege
ADMIN
Input Format
RTRV-USER-SECU:[<TID>]::[<CTAG>];
Example:
RTRV-USER-SECU:HTVLALEXD16::27;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 27
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> >lf>
M^^<CTAG>^COMPLD <cr> <lf>
[^^^"<UID>:<CID>,<UAP>" <cr> <lf>]...
^^^"<UID>:<CID>,<UAP>, <login failures>" <cr>
;
6-8
<lf>
61186003L1-35D
Section 6, Security TL1 Commands - RTRV-USER-SECU
Example:
M
HTVLALEXD16 02-06-04
27 COMPLD
"ADTRAN:0, 0x4b, 0”
"ADMIN:1, 0x4b, 0”
"READONLY:2, 0x01, 0”
"READWRITE:3, 0x03, 0”
"TEST:4, 0x0b, 0”
"USER1:5, 0x4b, 0”
16:57:20
;
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
<cr>
<lf>
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
6-9
MX2820 System TL1 Reference Guide
This page is intentionally blank.
6-10
61186003L1-35D
Section 7
Surveillance TL1 Commands
INTRODUCTION
The following Surveillance TL1 commands apply to the MX2820 System:
• “ALW-MSG” on page 7-2
• “INH-MSG” on page 7-4
• “RTRV-ALM” on page 7-6
• “RTRV-ALM-ENV” on page 7-8
• “RTRV-COND” on page 7-11
• “RTRV-HDR” on page 7-13
• “RTRV-PM-rr” on page 7-15
• “RTRV-PMSCHED-rr” on page 7-17
• “RTRV-SYS” on page 7-19
• “RTRV-VER” on page 7-21
• “RTRV-VERSION” on page 7-23
• “SCHED-PMREPT-rr” on page 7-25
61186003L1-35D
7-1
MX2820 System TL1 Reference Guide
ALW-MSG
The ALW-MSG (Allow-Message) command enables a NE to transmit autonomous messages to
an Operations System (OS).
This command has the following format for the command verb:
ALW-MSG-{EQPT|rr|ALL}
The valid values for rr as the second modifier are as follows:
• T1
• T3
• STS1
• VT1
The value entered for the <NTFCNCDE> parameter determines which autonomous message
alarms are sent by the NE.
The INH-MSG (Inhibit-Message) command inhibits the transmission of Autonomous messages
to an OS. Refer to the INH-MSG commands in this section for additional information.
Refer to “Appendix E, Autonomous Messages” for additional information.
Minimum User Access Privilege
READONLY
Input Format
ALW-MSG-{EQPT|rr|ALL}:[<TID>]::[<CTAG>]::[<NTFCNCDE>],;
Example:
ALW-MSG-EQPT:HTVLALEXD16::2::MJ,;
Input Parameters
7-2
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
NTFCNCDE
For the Notification Code (NTFCNCDE), refer to “Appendix A,
Input Commands Data Dictionary” for additional information.
61186003L1-35D
Section 7, Surveillance TL1 Commands - ALW-MSG
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 3
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
Example:
M
;
HTVLALEXD16
3 COMPLD
02-05-30
15:43:02
Error Response
<cr> <lf> <lf>
^^^<SID> <YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
7-3
MX2820 System TL1 Reference Guide
INH-MSG
The INH-MSG (Inhibit-Message) commands instruct an NE to inhibit the sending of autonomous messages from an NE to OS/user.
This command has the following format for the command verb:
INH-MSG-{EQPT|rr|ALL}
The valid values for rr as the second modifier are as follows:
• T1
• T3
• STS1
• VT1
The value entered for the <NTFCNCDE> parameter determines which autonomous message
alarms are inhibited.
To resume the sending of autonomous messages, refer the ALW-MSG commands in this
section.
Minimum User Access Privilege
READONLY
Input Format
INH-MSG-{EQPT|rr|ALL}:[<TID>]::[<CTAG>]::[<NTFCNCDE>],;
Example:
INH-MSG-EQPT:HTVLALEXD16::13::MJ,;
Input Parameters
7-4
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
NTFCNCDE
For the NTFCNCDE, refer to “Appendix A, Input Commands
Data Dictionary” for additional information.
61186003L1-35D
Section 7, Surveillance TL1 Commands - INH-MSG
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 13
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
Example:
M
;
HTVLALEXD16
13 COMPLD
02-05-30
17:15:51
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
7-5
MX2820 System TL1 Reference Guide
RTRV-ALM
The RTRV-ALM (Retrieve-Alarm) TL1 command instructs an NE to retrieve and send the
current status of its alarm conditions associated with one or more of its entities.
The command can be used to retrieve NE information, which in turn can be used to update an
OS database when it is suspected that autonomous alarm messages issued by the NE were
not received or properly processed. This command can also be used to evaluate the system
before or after NE maintenance operations.
The command has the following format for the command verb:
RTRV-ALM-{EQPT|rr|ALL}
The valid values for rr as the second modifier are as follows:
• T1
• T3
• STS1
• VT1
Environmental alarms are not expected in response to the RTRV-ALM command. The RTRVALM-ENV command retrieves environmental alarms.
Minimum User Access Privilege
READONLY
Input Format
RTRV-ALM-{EQPT|rr|ALL}:[<TID>]:[<AID>]:[<CTAG>]::[<NTFCNCDE>],[<CONDTYPE>], [<SRVEFF>],[<LOCN>],;
Example:
RTRV-ALM-EQPT:HTVLALEXD16:1-T3-MUX4-1:19::CR,LOS,SA,NEND,;
Input Parameters
7-6
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE to which the desired
alarm conditions pertain. Refer to “Section 3, ADTRAN AID
Formats” for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
NTFCNCDE
For the NTFCNCDE, refer to “Appendix A, Input Commands
Data Dictionary” for additional information.
CONDTYPE
For the Condition Type (CONDTYPE), refer to “Appendix A,
Input Commands Data Dictionary” for additional information.
SRVEFF
For the Service Effect (SRVEFF), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-ALM
LOCN
For the LOCN, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG>
<
<cr> <lf>
Example:
IP 19
<
Normal Response
Format for no Alarm Conditions
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^COMPLD <cr> <lf>
;
<cr>
<lf>
Format for Alarm Conditions
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^COMPLD <cr> <lf>
<rspblk> + ;
<cr>
<lf>
<rspblk> has the format:
^^"[<AID>] [,<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,[<OCRDAT>],
[<OCRTM>],[<LOCN>],[<TMPER>],:[<CONDDESCR>]" <cr> <lf>
Example:
HTVLALEXD16 02-10-14 17:13:45
19 COMPLD
"1-T1-MUX3-1,T1:MJ,LOS,SA,10-09,12-11-01,NEND,,:\"LOS\""
"1-T3-MUX7-1,T3:CR,OOF,SA,10-11,11-00-22,NEND,,:\"DS3 OOF\""
"1-T3-MUX7-1,T3:CR,LOS,SA,10-11,11-00-22,NEND,,:\"DS3 LOS\""
M
;
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
<cr>
<lf>
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
7-7
MX2820 System TL1 Reference Guide
RTRV-ALM-ENV
The RTRV-ALM-ENV (Retrieve Alarm Environment) command requests that an NE or office
environment monitor retrieve specified, outstanding environmental alarms. The command can
be used to retrieve NE information, which in turn can be used to update an OS environmental
alarm database.
The following environmental alarms apply to the MX2820 System:
• PWRA (Power A)
• PWRB (Power B)
• AUX1 (Auxiliary Alarm Input #1)
• AUX2 (Auxiliary Alarm Input #2)
• AUX3A (Auxiliary Alarm Input #3A)
• AUX3B (Auxiliary Alarm Input #3B)
Environmental Alarm Summary
Table 7-1 provides an environmental alarm summary for the MX2820 System.
Table 7-1. MX2820 Environmental Alarm Data
Alarm
Default AID
Index
Default
Condition
Code
Default
Severity
Level
Description String
Auxiliary1 Input
1
AUX1
Major
AUX #1 INPUT
Auxiliary2 Input
2
AUX2
Major
AUX #2 INPUT
Auxiliary3A Input
3
AUX3A
Major
AUX #3A INPUT
Auxiliary3B Input
3
AUX3B
Major
AUX #3B INPUT
PWR Bus A Fail
4
PWRA
Major
Power Bus A Fail (No
provisionable description string)
PWR Bus B Fail
5
PWRB
Major
Power Bus B Fail (No
provisionable description string)
Minimum User Access Privilege
READONLY
Input Format
RTRV-ALM-ENV:[<TID>]:[<AID>]:[<CTAG>]::[<NTFCNCDE>][,<ALMTYPE>];
Example:
RTRV-ALM-ENV:HTVLALEXD16:1-ENV-1:20::MJ,AUX1;
7-8
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-ALM-ENV
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE or office from which
information is being retrieved. For this command, the AID
format is unit-group-slot or ALL. ALL is the default value for the
AID parameter. Refer to “Section 3, ADTRAN AID Formats” for
additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
NTFCNCDE
For the NTFCNCDE, refer to “Appendix A, Input Commands
Data Dictionary” for additional information.
ALMTYPE
For the Alarm Type (ALMTYPE), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 20
<
Normal Response
The following format applies if no outstanding alarms satisfy the request:
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
The following format applies if one or more alarms satisfy the request (+ denotes one or more):
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
<rspblk> + ;
The <rspblk> parameter has the following format:
^^^"<AID>:<NTFCNCDE>,<ALMTYPE>,[<OCRDAT>,[<OCRTM>]" <cr> <lf>
Example:
M
HTVLALEXD16 02-05-31 10:36:16
20 COMPLD
"1-ENV-1:MJ,AUX1,05-31,10-35-18"
;
61186003L1-35D
7-9
MX2820 System TL1 Reference Guide
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-10
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-COND
RTRV-COND
The RTRV-COND (Retrieve Condition) command instructs an NE to return the current
standing condition or state associated with one or more equipment units, transmission types,
or test access within the NE. An alternate use for this command is to instruct an NE to
retrieve all the AIDs associated with a specified condition or state in the <TYPEREQ>
parameter.
This command has the following format for the command verb:
RTRV-COND-{EQPT|rr|ALL}
The valid values for rr as the second modifier are as follows:
• T1
• T3
• STS1
• VT1
Minimum User Access Privilege
READONLY
Input Format
RTRV-COND-{EQPT|rr|ALL}:[<TID>]:[<AID>]:[<CTAG>]::[<TYPEREQ>],[<LOCN>],;
Example:
RTRV-COND-EQPT:HTVLALEXD16:1-T3-MUX4-1:22::CR,FEND,;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE or office from which
information is being retrieved. For this command, the AID
format is unit-group-slot or ALL. ALL is the default value for the
AID parameter. Refer to “Section 3, ADTRAN AID Formats” for
additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
TYPEREQ
For the TYPEREQ parameter, refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
LOCN
For the LOCN, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
61186003L1-35D
7-11
MX2820 System TL1 Reference Guide
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 22
<
Normal Response
If there are no conditions to report, the format is as follows:
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
If there is at least one condition to report, the format is as follows (+ denotes one or more):
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
<rspblk> + ;
<rspblk> has the following format:
^^^"<AID>[,<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],[<OCRDAT>],[<OCRTM>],
[<LOCN>],[,<TMPER>],[<CONDDESCR>]" <cr> <lf>
Example:
M
HTVLALEXD16 02-05-31 10:59:19
22 COMPLD
"1-T3-MUX4-1,T3:CR,LOS,SA,05-31,09-36-42,NEND,,\"DS3 LOS\""
;
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-12
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-HDR
RTRV-HDR
The RTRV-HDR (Retrieve-Header) command instructs the NE to reply with a normal response
that indicates COMPLD. The information of interest is the reply itself along with information
the NE has about itself that includes the <SID>, the <DATE>, the <TIME>, and the SCU
software release.
Minimum User Access Privilege
READONLY
Input Format
RTRV-HDR:[<TID>]::[<CTAG>];
Example:
RTRV-HDR:HTVLALEXD16::23;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 23
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr>
M^^<CTAG>^COMPLD <cr> <lf>
^^^/* <SW Rev.> */ <cr> <lf>
;
<lf>
Example:
M
HTVLALEXD16
23 COMPLD
/*^COL^*/
02-05-31
11:08:32
;
61186003L1-35D
7-13
MX2820 System TL1 Reference Guide
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
<cr>
<lf>
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-14
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-PM-rr
RTRV-PM-rr
The RTRV-PM-rr (Retrieve Performance Monitoring rr) command instructs an NE to send its
current set of Performance Monitoring (PM) data for the type specified by rr.
The valid values for rr as the second modifier are as follows:
• T1
• T3
• STS1
• VT1
The data can be used to load an OS or audit an OS database when it is suspected that Autonomous PM messages were not received or properly processed. This command can also be used
to evaluate the system before or after NE maintenance operations.
Minimum User Access Privilege
READONLY
Input Format
RTRV-PM-rr:[<TID>]:<AID>:[<CTAG>]::[<MONTYPE>],[<MONLEV>],[<LOCN>],, [<TMPER>],[<MONDAT>][,<MONTM>];
Example:
RTRV-PM-T1:HTVLALEXD16:1-T1-MUX3-7:::ESL,1-UP,NEND,,1-DAY,05-31,12-00;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID parameter identifies the slot location for the entity
within the NE where the data is being retrieved. Refer to
“Section 3, ADTRAN AID Formats” for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
MONTYPE
For the MONTYPE, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
MONLEV
For the Monitor Level (MONLEV), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
LOCN
For the LOCN, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
TMPER
For the TMPER, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
MONDAT
For the Monitor Date (MONDAT), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
MONTM
For the Monitor Time (MONTM), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
61186003L1-35D
7-15
MX2820 System TL1 Reference Guide
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 24
<
Normal Response
If the NE does not have any PM values to report, the following format applies:
<cr> <lf> <lf>
^^^<SID>^YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
If the NE has one or more PM values to report, the following format applies (+ denotes one or
more):
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
<rspblk> + ;
<rspblk> has the following format:
^^^"<AID>:<MONTYPE>,<MONVAL>,[<VLDTY>],[<LOCN>],,[<TMPER>],[<MONDAT>]
[,<MONTM>]" <cr> <lf>
Example:
M
HTVLALEXD16 02-05-31 12:02:08
24 COMPLD
"1-T1-MUX3-1:SESL,37117,PRTL,NEND,,1-DAY,05-31,00-00"
"1-T1-MUX3-1:ESL,37116,PRTL,NEND,,1-DAY,05-31,00-00"
;
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-16
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-PMSCHED-rr
RTRV-PMSCHED-RR
The RTRV-PMSCHED (Retrieve Performance Monitoring Schedule) command instructs an NE
to send the PM reporting schedule that was set with the SCHED-PMREPT-rr command.
This command has the following format the command verb:
RTRV-PMSCHED-{rr|ALL}
The valid values for rr as the second modifier are as follows:
• T1
• T3
• STS1
• VT1
Minimum User Access Privilege
READONLY
Input Format
RTRV-PMSCHED-{rr|ALL}:[<TID>]:[<AID>]:[<CTAG>];
Example:
RTRV-PMSCHED-T3:HTVLALEXD16:1-T3-MUX3-1:25;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID parameter identifies the entity within the NE from
which the information is being retrieved. Refer to “Section 3,
ADTRAN AID Formats” for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 25
<
61186003L1-35D
7-17
MX2820 System TL1 Reference Guide
Normal Response
If a schedule does not exist, the following format applies:
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
If there is at least one schedule to report, the following format applies (+ denotes one or more):
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
<rspblk> + ;
<rspblk> has the following format:
^^^"<AID>[,<AIDTYPE>]:<REPTINVL>,<REPTDAT>,<REPTTM>,[<NUMIVNL>],,[<MONLEV>],
<LOCN>,,[<TMPER>],[<TMOFST>],[<INHMODE>]" <cr> <lf>
Example:
M
HTVLALEXD16 02-05-31 17:05:30
25 COMPLD
"1-T1-MUX9-5,T1:15-MIN,05-31,20-00,3,,0-UP,NEND,,15-MIN,0-0-0,ALW"
;
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-18
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-SYS
RTRV-SYS
The RTRV-SYS (Retrieve System) command provides contact information, the location, and the
type of system.
Minimum User Access Privilege
READONLY
Input Format
RTRV-SYS:[<TID>]::[<CTAG>];
Example:
RTRV-SYS:HTVLALEXD16::26;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 26
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
^^^"<CONTACT>" <cr> <lf>
^^^"<LOCATION>" <cr> <lf>
^^^"<TYPE>" <cr> <lf>
;
Example:
M
HTVLALEXD16 02-05-31 15:47:20
26 COMPLD
"::CONTACT=WWW.ADTRAN.COM"
"::LOCATION=HUNTSVILLECOUNIT1"
"::TYPE=MX2820 23-INCH
;
61186003L1-35D
7-19
MX2820 System TL1 Reference Guide
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-20
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-VER
RTRV-VER
The RTRV-VER (Retrieve Version) command instructs an NE to return its software version.
Minimum User Access Privilege
READONLY
Input Format
RTRV-VER:[<TID>]::[<CTAG>];
Example:
RTRV-VER:HTVLALEXD16::28;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 28
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
^^^"<SW Rev.>" <cr> <lf>
;
Example:
M
28
HTVLALEXD16 02-05-31
COMPLD
"::VERSION=C01"
15:52:08
;
61186003L1-35D
7-21
MX2820 System TL1 Reference Guide
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-22
61186003L1-35D
Section 7, Surveillance TL1 Commands - RTRV-VERSION
RTRV-VERSION
The RTRV-VERSION (Retrieve Version) command instructs an NE to return its software
version.
Minimum User Access Privilege
READONLY
Input Format
RTRV-VER:[<TID>]::[<CTAG>];
Example:
RTRV-VER:HTVLALEXD16::28;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 28
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
^^^"<SW Rev.>" <cr> <lf>
;
Example:
M
HTVLALEXD16 02-05-31
28 COMPLD
"::VERSION=C01"
15:52:08
;
61186003L1-35D
7-23
MX2820 System TL1 Reference Guide
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-24
61186003L1-35D
Section 7, Surveillance TL1 Commands - SCHED-PMREPT-rr
SCHED-PMREPT-rr
The SCHED-PMREPT-rr (Schedule Performance Monitoring Report-rr) command instructs an
NE to start, reschedule, or remove the reporting of performance-monitoring data for the type
specified by rr.
The valid values for rr as the second modifier are as follows:
• T1
• T3
• STS1
• VT1
When this command is used, it is expected that the NE will periodically return data to the OS/
user with the automatic Report Performance Monitoring message.
Minimum User Access Privilege
ADMIN
Input Format
SCHED-PMREPT-rr:[<TID>]:<AID>:[<CTAG>]::[<REPTINVL>],[<REPTSTATM],[<NUMREPT>],
[<MONTYPE>],[<MONLEV>],[<LOCN>],,[<TMPER>][,<TMOFST>];
Example:
SCHED-PMREPT-T1:HTVLALEXD16:1-T1-MUX8-9:31::15-MIN,20-0,3,ESL,0-UP,NEND,,
15-MIN,0-0-0;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE from which data is
being retrieved. Refer to “Section 3, ADTRAN AID Formats”, for
additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
REPTINVL
For the Report Interval (REPTINVL), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
REPTSTATM
For the Report Starting Time (REPTSTATM), refer to “Appendix
A, Input Commands Data Dictionary” for additional information.
NUMREPT
For the Number of Reports (NUMREPT), refer to “Appendix A,
Input Commands Data Dictionary” for additional information.
MONTYPE
For the MONTYPE, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
61186003L1-35D
7-25
MX2820 System TL1 Reference Guide
MONLEV
For the MONLEV, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
LOCN
For the LOCN, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
TMPER
For the TMPER, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
TMOFST
For the Time Offset (TMOFST), refer to “Appendix A, Input
Commands Data Dictionary” for additional information..
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 31
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
Example:
M
;
HTVLALEXD16
31 COMPLD
02-05-31
17:04:08
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
7-26
61186003L1-35D
Section 8
System Maintenance TL1 Commands
INTRODUCTION
The following System Maintenance TL1 commands apply to the MX2820 System:
• “SW-TOPROTN-rr” on page 8-2
• “SW-TOWKG-rr” on page 8-4
61186003L1-35D
8-1
MX2820 System TL1 Reference Guide
SW-TOPROTN-rr
The SW-TOPROTN-rr (Switch-To Protection-rr) command instructs an NE to perform a
protection switch.
Minimum User Access Privilege
READWRITE
Input Format
SW-TOPROTN-EQPT:[<TID>]:<AID>:[<CTAG>]::,;
Example:
SW-TOPROTN-EQPT:HTVLALEXD16:1-EQPT-MUX3-A::,;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE to which the desired
alarm conditions pertain. Refer to “Section 3, ADTRAN AID
Formats” for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 33
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
Example:
M
;
8-2
HTVLALEXD16
33 COMPLD
02-06-03
11:37:02
61186003L1-35D
Section 8, System Maintenance TL1 Commands - SW-TOPROTN-rr
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
8-3
MX2820 System TL1 Reference Guide
SW-TOWKG-rr
The SW-TOWKG-EQPT (Switch-To Working rr) command instructs an NE to switch a
protected working unit back to working or release from protection.
Minimum User Access Privilege
READWRITE
Input Format
SW-TOWKG-EQPT:[<TID>]:<AID>:[<CTAG>]::;
Example:
SW-TOWKG-EQPT:HTVLALEXD16:1-EQPT-MUX3-B:34::;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE to which the desired
alarm conditions pertain. Refer to “Section 3, ADTRAN AID
Formats” for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
IP^<CTAG> <cr> <lf>
<
Example:
IP 34
<
Normal Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^COMPLD <cr> <lf>
;
Example:
M
;
8-4
HTVLALEXD16
34 COMPLD
02-06-03
11:38:39
61186003L1-35D
Section 8, System Maintenance TL1 Commands - SW-TOWKG-rr
Error Response
<cr> <lf> <lf>
^^^<SID>^<YY-MM-DD>^<HH:MM:SS> <cr> <lf>
M^^<CTAG>^DENY <cr> <lf>
^^^<error_code> <cr> <lf>
;
Refer to “Appendix B, Response Messages Data Dictionary” for Normal Response and Error
Response parameter descriptions.
61186003L1-35D
8-5
MX2820 System TL1 Reference Guide
This page is intentionally blank.
8-6
61186003L1-35D
Section 9
System Test TL1 Commands
INTRODUCTION
The following System Maintenance TL1 commands apply to the MX2820 System:
• “OPR-LPBK-rr” on page 9-2
• “RLS-LPBK-rr” on page 9-4
61186003L1-35D
9-1
MX2820 System TL1 Reference Guide
OPR-LPBK-RR
The OPR-LPBK-rr (Operate-Loopback) instructs an NE to operate a loopback on a specified
facility in the NE. The loop can be accomplished at either the near end, the far end, or on the
line. It is assumed that the specified entity is in a state that allows a loopback to occur. If not,
an error response should be issued by the NE.
Any NE that has a loopback in effect should include the appropriate condition type information in response to a RTRV-COND request.
The supported values for rr are as follows:
• T1
• T3
• STS1
• VT1
Input Format
OPR-LPBK-rr:[<tid>]:<aid>:[<ctag>]::,,,<lpbktype>;
Example:
OPR-LPBK-T3:HTVLALEXD16:1-T3-MUX4-1:25::,,,LINE;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE to which the desired
alarm conditions pertain. Refer to “Section 3, ADTRAN AID
Formats” for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
LPBKTYPE
For the Loopback Type (LPBKTYPE), refer to “Appendix A, Input
Commands Data Dictionary” for additional information.
Response Format
Acknowledgment
If a normal response or an error response cannot be sent within two seconds of receipt of an
input command, an appropriate acknowledgment should be sent.
Normal Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^COMPLD <cr> <lf>;
9-2
61186003L1-35D
Section 9, System Test TL1 Commands - OPR-LPBK-rr
Example:
M
;
HTVLALEXD16
25 COMPLD
03-01-17
09:39:59
Error Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^DENY <cr> <lf>
^^^<errcde> <cr> <lf>
(^^^"<error description>" <cr> <lf>) *
(^^^/*error text*/ <cr> <lf>) * ;
Refer to “Appendix A, Input Commands Data Dictionary” for input parameter descriptions.
Refer to “Appendix B, Response Messages Data Dictionary” for normal response and error
response parameter descriptions.
61186003L1-35D
9-3
MX2820 System TL1 Reference Guide
RLS-LPBK-RR
The RLS-LPBK-rr (Release-Loopback) command instructs an NE to release loopback on a
specified facility. The loop can have been established at the near end, the far end, or on the
line. Refer to “OPR-LPBK-rr” for related information.
The supported values for rr are as follows:
• T1
• T3
• STS1
• VT1
Input Format
RLS-LPBK-{rr|ALL}:[<tid>]:<aid>:[<ctag>]::,,;
Example:
RLS-LPBK-T3:HTVLALEXD16:1-T3-MUX4-1:26::,,;
Input Parameters
TID
The TID identifies the target NE for the command. Refer to the
“TID” on page 2-3 for additional information.
AID
The AID identifies the entity within the NE to which the desired
alarm conditions pertain. Refer to “Section 3, ADTRAN AID
Formats” for additional information.
CTAG
For the CTAG, refer to “Appendix A, Input Commands Data
Dictionary” for additional information.
Response Format
Acknowledgment
If a normal response or an error response cannot be sent within 2 seconds of receipt of an
input command, an appropriate acknowledgment should be sent.
Normal Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^COMPLD <cr> <lf>;
Example:
M
;
9-4
HTVLALEXD16
25 COMPLD
03-01-17
09:39:59
61186003L1-35D
Section 9, System Test TL1 Commands - RLS-LPBK-rr
Error Response
<cr> <lf> <lf>
^^^<rsphdr> <cr> <lf>
M^^<ctag>^DENY <cr> <lf>
^^^<errcde> <cr> <lf>
(^^^"<error description>" <cr> <lf>) *
(^^^/*error text*/ <cr> <lf>) * ;
The (^^^"<error description>" <cr> <lf>) and (^^^/*error text*/ <cr> <lf>) error response
blocks are OPTIONAL and, if desired, MULTIPLE repetitions are allowed.
Refer to “Appendix A, Input Commands Data Dictionary” for input parameter descriptions.
Refer to “Appendix B, Response Messages Data Dictionary” for normal response and error
response parameter descriptions.
61186003L1-35D
9-5
MX2820 System TL1 Reference Guide
This page is intentionally blank.
9-6
61186003L1-35D
Appendix A
Input Commands Data Dictionary
INTRODUCTION
Table A-1 provides descriptions for the parameters that can be used in a TL1 input command
for the MX2820 System.
Table A-1. TL1 Input Commands Data Dictionary
Parameter
Description
AID
Access Identifier. Refer to the “Section 3, ADTRAN AID Formats” for
information.
ALMTYPE
This parameter indicates the alarm type.
CTAG
The Correlation Tag associates the input command with the response
message(s). The CTAG contains 1–6 alphanumeric characters. The
CTAG is echoed in the response message to the input command. For
example, an input command with a CTAG of 1 has a response message
with a CTAG of 1. The default for the CTAG is 0.
DIRN
The Direction parameter indicates the transmission direction to which
switching is made. The direction is relative to the SONET line or path
identified by the AID parameter. The supported value is RCV, Receive
direction only.
HH-MM-SS
This parameter is the input format for the SET-DAT command that sets
the hours, minutes, and seconds. Each component is specified by two
digits.
LOCN
The Location parameter indicates the location from which an alarm
condition or PM threshold alarm value is being reported and also refers
to the entity identified by the AID parameter. Near end refers to alarm
conditions occurring at the identified entity, and far end refers to alarm
conditions occurring at a distant entity that is connected to the identified entity. Values are as follows:
• NEND
• FEND
61186003L1-35D
A-1
MX2820 System TL1 Reference Guide
Table A-1. TL1 Input Commands Data Dictionary (Continued)
Parameter
Description
LPBKTYPE
The Loopback Type parameter indicates the type of loopback being set
for the transmission entity. Depending on the characteristics of the
transmission system, various parts of a signal can be looped back. For
example, the LINE loopback can very well be a full metallic loopback,
while a PAYLOAD loopback can result in a signal that has been recoded
with new and different header and/or CRC information. Other values
are provided for technologies such as SONET and testing.
The supported values are shown in Table 5-3 under the “LOOPBACK”
parameter and in Table 5-4 under the “LOOPBACK” parameter.
MONDAT
The Monitoring Date parameter indicates the beginning date for the PM
data specified in the TMPER parameter.
The format for MONDAT is MOY-DOM.
• MOY indicates month of year and ranges from 01 to 12
• DOM indicates day of month and ranges from 01 to 31
A null value for this parameter defaults to the current date.
MONLEV
The Monitoring Level parameter specifies the discriminating level for
the requested monitored parameters.
Values are as follows:
• 0-UP, show zeros
• 1-UP, suppress zeros
MONTM
The Monitoring Time parameter indicates the beginning time of day for
the PM data storage register specified in the TMPER parameter.
The format for MONTM is HOD-MOH, and the supported values are as
follows:
• HOD indicates hour of day and ranges from 00 to 23
• MOH indicates minutes of hour and ranges from 00 to 59
A null value for this parameter defaults to the current time.
MONTYPE
The Monitor Type parameter specifies the type of the monitored parameter for which a value is requested.
NTFCNCDE
The Notification Code parameter provides a two-character code associated with a single alarm condition.
Values are as follows:
• CR, (Critical alarm)
• MJ, (Major alarm)
• MN, (Minor alarm)
• NA, (Not alarmed)
• CL, (Cleared alarm)
• TH, (Threshold)
A-2
61186003L1-35D
Appendix A, Input Commands Data Dictionary - Introduction
Table A-1. TL1 Input Commands Data Dictionary (Continued)
Parameter
Description
NUMREPT
The Number of Reports parameter specifies the number of the reports
that the schedule is expected to produce. A value of 0 terminates any
performance-monitoring reporting schedule that was introduced by a
previous “SCHED-PMREPT-rr” command. If the NUMREPT parameter
is null, the NE initiates performance monitoring and remains in that
scheduled mode until the schedule is changed. A value of -1 will schedule performance monitoring indefinitely.
ORGN
The Originating Office parameter indicates the office that originates the
signal to be looped back.
The supported values are as follows:
• NEND
• FEND
• BOTH
PID
The Private Identifier parameter provides the password for the user.
The PID consists of a string of letters and digits with a maximum length
of 12 characters. The first character must be a letter.
• Letter: A-Z
• Digit: 0-9
REPTINVL
The Report Interval parameter specifies how often a performance-monitoring report is to be generated and returned to the requesting OS/
user.
The REPTINVL format is VAL-UN.
Values for VAL (value) and UN (units of time) are as follows:
VALUN
1 to 31DAY
1 to 24HR
1 to 1440MIN
REPTSTATM
The Report Starting Time parameter specifies the starting time for the
performance-monitoring reporting schedule.
The REPTSTATM format is HOD-MOH, and the supported values are as
follows:
• HOD indicates hour of day and ranges from 00 to 23
• MOH indicates minutes of hour and ranges from 00 to 59
rr
The rr value is a command verb modifier that indicates the type of
transmission entity for an NE.
Values are as follows:
• EQPT
• T1
• T3
• STS1
• VT1
61186003L1-35D
A-3
MX2820 System TL1 Reference Guide
Table A-1. TL1 Input Commands Data Dictionary (Continued)
Parameter
Description
SRVEFF
This parameter indicates the effect on the service caused by an alarm
condition. Valid values for SRVEFF are:
• SA - Service-affecting condition, immediate action required
• NSA - Nonservice-affecting condition, action required
Refer to “Appendix D, Alarms and Alarm Condition Codes” in this document for Service Affecting data.
<specific_data_ block>
The <specific data block> field is used for data parameters (attributes)
that pertain to a transmission entity. The data parameters are used for
provisioning a transmission entity.
<state_block>
The <state_block> field is used for state parameters. The state parameters provide information about an object's ability to perform its service
function.
Values are as follows:
• IS (In-Service)
• OOS (Out-of-Service)
TID
The Target Identifier indicates the end-target NE for a TL1 command.
The Common Language Location Identifier (CLLI) is often used and recommended as the TID in TL1 commands. The CLLI code consists of
one-to-twenty alphanumeric characters that are not case sensitive. The
CLLI code identifies physical locations and equipment such as buildings, central offices, antennae, channel banks, and shelves. CLLI codes
are also used as unique identifiers for a single NE.
The valid characters for a TID include alphanumeric with a dash (-) as
a delimiter. The TID must begin with a letter.
Refer to the “TID” on page 2-3 for additional information.
TMOFST
The Time Offset parameter specifies the time offset from the end of the
last complete accumulation time period to the beginning of the accumulation time period specified in the TMPER parameter. The TMOFST
parameter provides a way to specify the age of storage registers.
The format is DAY-HR-MIN, and the supported values are as follows:
• DAY indicates day of month and ranges from 00 to 31
• HR indicates hour of day and ranges from 0 to 23
• MIN indicates minutes of hour and ranges from 00 to 59
A null value defaults to 0-0-0.
TMPER
The Time Period parameter indicates the accumulation time period for
performance-monitoring data.
Values are as follows:
• 15-MIN (quarterly hourly)
• 1-DAY
TSN
A-4
The Test Session Number, which the OS assigns for each circuit
access, identifies all message for each circuit access. The range of values is from 1 to 999.
61186003L1-35D
Appendix A, Input Commands Data Dictionary - Introduction
Table A-1. TL1 Input Commands Data Dictionary (Continued)
Parameter
Description
TYPEREQ
The TYPEREQ parameter indicates the condition type or entity state
being retrieved from the entity within the NE. For the MX2820 System,
values for the NTFCNCDE parameter are used for this parameter.
UAP
User Access Privilege. The UAP value specifies the operations that a
user is allowed to perform.
Valid values are as follows:
• READONLY : 1
• READWRITE : 2
• TEST : 3
• ADMIN : 4
UID
User Identifier. The UID, logon name, consists of a string of letters and
digits with a maximum length of 12 characters. The first character
must be a letter.
• Letter: A-Z
• Digit: 0-9
YY-MM-DD
This parameter is the input format for the “SET-DAT” command that
sets the year, month, and day. Each component is specified by exactly
two digits.
The format is YY-MM-DD, and the supported values are as follows:
• YY indicates year and ranges from 00 to 67
• MM indicates month of year and ranges from 01 to 12
• DD indicates day of month and ranges from 01 to 31
61186003L1-35D
A-5
MX2820 System TL1 Reference Guide
This page is intentionally blank.
A-6
61186003L1-35D
Appendix B
Response Messages Data Dictionary
INTRODUCTION
Table B-1 provides descriptions for the parameters that can be received in a response message
to a TL1 input command for the MX2820 System.
Table B-1. TL1 Response Messages Data Dictionary
Parameter
Description
^
The carot symbol indicates an ASCII space character.
+
The plus sign indicates information for the preceding field or parameter
can occur one or more times.
AID
The AID parameter in a response message indicates the location within
the NE entity from which information is being retrieved.
AIDTYPE
This parameter indicates the type of AID. Examples include T1 and T3.
ALMTYPE
This parameter indicates the alarm type.
CID
The Channel Identifier (CID) parameter indicates the user's interface
port/channel that initiates a session or a logical equivalent such as a
user's calling address. For ports, the CID can be up to ten alphanumeric characters. For the directory numbers, the CID can consists of
seven digits in the form NXX-XXXX or ten digits in the form
NPA-NXX-XXXX.
CLEI
This parameter indicates the equipment CLEI code for a specific
vendor.
COMPLD
This parameter indicates the successful execution for the input
command. The transaction was fully completed.
CONDDESCR
For the “RTRV-ALM” commands, this parameter provides a text
description of the trouble.
For the “RTRV-COND” commands, this parameter provides a text
description of the condition or state.
CONDTYPE
61186003L1-35D
This parameter indicates a single type of alarm condition being
reported for an entity within the NE. Refer to “Appendix D, Alarms and
Alarm Condition Codes” for condition types that apply to the MX2820
System.
B-1
MX2820 System TL1 Reference Guide
Table B-1. TL1 Response Messages Data Dictionary (Continued)
Parameter
Description
CONTACT
This parameter consists of a user-specified character string that
indicates the personnel to contact for the MX2820 System. The
maximum length is 55 characters.
<cr>
ASCII carriage return
CTAG
The CTAG associates the input command with the response
message(s). The CTAG contains 1 to 6 alphanumeric characters. The
CTAG is echoed in the response message to the input command. For
example, an input command with a CTAG of 1 has a response message
with a CTAG of 1.
DENY
This parameter indicates unsuccessful execution for the input
command. The transaction was fully denied or uncompleted.
<error_code>
The error_code provides a four-character mnemonic abbreviation for
the error condition. Refer to “Appendix C, MX2820 System Error
Codes” in this document for additional information.
HH:MM:SS
This parameter is part of the response message header format.
The two digits components are as follows:
• HH indicates hour of day and ranges from 00 to 23
• MM indicates minutes of hour and ranges from 00 to 59
• SS indicates seconds of minute and ranges from 00 to 59
INHMODE
The Inhibit Mode parameter indicates whether a particular function is
inhibited. Valid values for this parameter are as follows:
• ALW : Function is allowed
• INH : Function is inhibited
A null value for this parameter defaults to ALW.
IP
This acknowledgment component indicates the action specified by the
input command is in progress.
<lf>
ASCII line feed character
LOCATION
This parameter consists of a user-specified character string that
indicates the location of the MX2820 System. The maximum length is
55 characters
LOCN
The Location parameter indicates the location from which an alarm
condition or Performance Monitoring (PM) threshold value is being
reported and also refers to the entity identified by the AID parameter.
Near end refers to alarm conditions occurring at the identified entity,
and far end refers to alarm conditions occurring at a distance entity
that is connected to the identified entity.
Values are as follows:
• NEND
• FEND
<login failures>
B-2
Number of login failures on the account.
61186003L1-35D
Appendix B, Response Messages Data Dictionary - Introduction
Table B-1. TL1 Response Messages Data Dictionary (Continued)
Parameter
Description
MONLEV
The Monitor Level parameter indicates the discriminating level for the
requested monitored parameter. Supported values are as follows:
• 0-UP : show zeros
• 1-UP : suppress zeros
MONTYPE
This parameter indicates the type of monitored parameter for which a
value is being retrieved.
MONVAL
This parameter provides the measured value for the MONTYPE parameter.
NTFCNCDE
The Notification Code parameter provides a two-character code associated with a single alarm condition.
Values are as follows:
• CR, (Critical alarm)
• MJ, (Major alarm)
• MN, (Minor alarm)
• NA, (Not alarmed)
• CL, (Cleared alarm)
• TH, (Threshold)
A value of NR indicates not reported when the event occurs. The NE
retains the information.
NUMINVL
The Number Interval parameter indicates the remaining number of
intervals associated with a particular action. A value of zero (0) for this
parameter in a SCHEDULE command indicates the stopping of the
particular action. A null value for this parameter specifies that the
particular task runs indefinitely until either stopped or rescheduled by
another command.
OCRDAT
The Occurrence Date parameter indicates the date for a triggering
event.
The OCRDAT format is MOY-DOM.
• MOY indicates month of the year and ranges from 01 to 12
• DOM indicates the day of the month and ranges from 01 to 31
OCRTM
The Occurrence Time parameter indicates the time for a triggering
event.
The OCRTM format is HOD-MOH-SOM.
• HOD indicates hour of day and ranges from 00 to 23
• MOH indicates minutes of hour and ranges from 00 to 59
• SOM indicates seconds of minutes and ranges from 00 to 59
A null value for this parameter means that the OCRTM and OCRDAT
parameters are not applicable.
61186003L1-35D
B-3
MX2820 System TL1 Reference Guide
Table B-1. TL1 Response Messages Data Dictionary (Continued)
Parameter
Description
REPTDAT
The Report Date parameter specifies the date for the next PM report.
The REPTDAT format is MOY-DOM.
• MOY indicates month and year and ranges from 01 to 12
• DOM indicates day month and ranges from 01 to 31
REPTINVL
The Report Interval parameter specifies how often a performancemonitoring report is to be generated and returned to the requesting
OS/user. The REPTINVL format is VAL-UN.
Values for VAL (value) and UN (units of time) are as follows:
VALUN
1 to 31DAY
1 to 24HR
1 to 1440MIN
REPTTM
The Report Time parameter specifies the time of day for the next PM
report.
The REPTTM format is HOD-MOH.
• HOD indicates hour of day and ranges from 00 to 23
• MOH indicates minutes of hour and ranges from 00 to 59
<rspblk>
The Response Block contains the information that an NE entity sends
to the OS/user. Information in the Response Block depends on the NE
entity sending the data to the OS/user and also depends on the input
command parameters sent to the NE by the OS/user.
SID
The Source Identifier (SID) identifies the Network Element generating
the response message. The SID is the shelf CLLI code.
<specific data block>
The Specific Data Block field provides information about the provision
data parameters for the specified NE entity. Examples of an NE entity
are T1 and T3. Refer to the “Transmission Entity Data Parameter
Tables” on page 5-10 for additional information.
SRVEFF
This parameter indicates the effect on the service caused by an alarm
condition. Valid values for SRVEFF are:
• SA - Service-affecting condition, immediate action required
• NSA - Nonservice-affecting condition, action required
Refer to “Appendix D, Alarms and Alarm Condition Codes” for Service
Affecting data.
<SW Rev.>
B-4
This parameter indicates the software release for an NE.
61186003L1-35D
Appendix B, Response Messages Data Dictionary - Introduction
Table B-1. TL1 Response Messages Data Dictionary (Continued)
Parameter
Description
TMOFST
The Time Offset parameter indicates the time offset from the end of the
last complete accumulation time period to the beginning of the
accumulation period specified in the TMPER parameter. The format for
TMOFST is DAY-HR-MIN.
The format is DAY-HR-MIN.
• DAY indicates day of month and ranges from 00 to 31
• HR indicates hour of day and ranges from 00 to 23
• MIN indicates minutes of hour and ranges from 00 to 59
A null value for the TMOFST parameter in Input messages defaults to
0-0-0.
TMPER
The Time Period parameter indicates the accumulation time period for
performance-monitoring data.
Values are as follows:
• 15-MIN (quarterly hourly)
• 1-DAY
TYPE
This parameter consists of a user-specified character string that
indicates the system type. The maximum length is 55 characters.
TYPEREP
The Type Report parameter identifies the condition type being reported
or the entity state that is being reported. The condition type corresponds to the CONDTYPE parameter. The entity state corresponds to
the <state> parameter. Valid values for the TYPEREP parameter are the
values that can be included in the CONDTYPE parameter are values
that can be in the <state> parameter.
Refer to “Appendix D, Alarms and Alarm Condition Codes” for values
that apply to the CONDTYPE parameter.
Values for the <state> parameter are as follows:
• IS (In Service)
• OOS (Out-of-Service) OOS implies Out-of-Service, Maintenance
UAP
User Access Privilege. The UAP value specifies the operations that a
user is allowed to perform.
Valid values are as follows:
• READONLY : 1
• READWRITE : 2
• TEST : 3
• ADMIN : 4
61186003L1-35D
B-5
MX2820 System TL1 Reference Guide
Table B-1. TL1 Response Messages Data Dictionary (Continued)
Parameter
Description
VLDTY
The Validity parameter provides historical monitoring information. This
parameter indicates whether the information for the specified monitoring period was accumulated over the entire monitoring period or some
portion of it.
Valid values are as follows:
• COMPL : Data is accumulated over the entire monitoring period
• PRTL : Data is accumulated over some portion of the monitoring
period
YY-MM-DD
This is the response message date format where the two digits components are as follows:
• YY indicates year and ranges from 00 to 67
• MM indicates month of year and ranges from 01 to 12
• DD indicates day of month and ranges from 01 to 31
B-6
61186003L1-35D
Appendix C
Error Codes
INTRODUCTION
The response message to a TL1 input command contains an error code <errcode> parameter
when the addressed NE cannot complete the action for the input command. Table C-1
provides error code for the MX2820 System.
Table C-1. MX2820 System Error Codes
Error Code
Category
Description
EANS
Equipment
This error code indicates access is not supported.
EATN
Equipage
This error code indicates not valid for access type.
ENEQ
Error
This error code indicates the device is not equipped.
ENPM
Error
This error code indicates performance monitoring is not supported.
ICNV
Input
This error code indicates the command is not valid.
IDRG
Input
This error code indicates the date range is not valid.
IIAC
Input
This error code indicates an invalid access identifier.
IIDT
Input
This error code indicates an invalid data parameter.
IIPG
Input
This error code indicates invalid parameter grouping.
INAC
Input
This error code indicates an invalid test access point.
IPNV
Input
This error code indicates the parameter is not valid.
PIUI
Privilege
This error code indicates the input user is not valid.
PLNA
Privilege
This error code indicates the login is not active or insufficient
privileges.
RABY
Resource
This error code indicates all TAPs are busy.
RCBY
Resource
This error code indicates a circuit busy condition (access point is in
use).
RNAN
Resource
This error code indicates the requested NE access address does not
exist.
61186003L1-35D
C-1
MX2820 System TL1 Reference Guide
Table C-1. MX2820 System Error Codes (Continued)
Error Code
Category
Description
RNAU
Resource
This error code indicates the requested NE access address is
unassigned.
RNBY
Resource
This error code indicates the NE is busy.
RTBY
Resource
This error code indicates the TAP is busy.
RTEN
Resource
This error code indicates the requested TAP does not exist.
SADC
Status
This error code indicates the device is already disconnected.
SCAT
Status
This error code indicates the circuit is already connected to another
TAP.
SCBS
Status
This error code indicates the channel is busy.
SCSN
Status
This error code indicates an invalid command sequence.
SNDS
Status
This error code indicates the NTE is in a diagnostic state.
SNVS
Status
This error code indicates the device is not in a valid state.
SRAC
Status
This error code indicates the requested access configuration is not
valid.
SRAN
Status
This error code indicate the access system cannot be released.
SRCN
Status
This error code indicates the requested condition already exists.
SROF
Status
This error code indicates the requested operation failed.
SRTN
Status
This error code indicates the TAP cannot be released.
SSRE
Status
This error code indicates the system resource is not available.
STLC
Status
This error code indicates the TAP is unable to locate the channel.
C-2
61186003L1-35D
Appendix D
Alarms and Alarm Condition Codes
INTRODUCTION
Alarm information and condition codes for the MX2820 System are provided in this index. The
following modules are included:
• SCU
• M13 MUX
• STS-1 MUX
• MX2820 Clock Card
SCU ALARMS
Alarms for the SCU are described in Table D-1.
Table D-1. MX2820 SCU Alarm Data
Condition Code
<CONDTYPE>
Alarm Level
Service
Affecting
(SRVEFF)
Description
AUX1
Major
NSA
This alarm indicates External Alarm Input
number 1 on the rear of the shelf is active.
The default alarm level is Minor and is
provisionable in the SCU alarm menus.
Provisionable alarm levels include: Critical,
Major, Minor, Alert, and Info. The description
string is provisionable and defaults to Aux #1
Input.
AUX2
Major
NSA
This alarm indicates External Alarm Input
number 2 on the rear of the shelf is active.
The default level is Alert and is provisionable
in the SCU alarm menus. Provisionable
alarm levels include: Critical, Major, Minor,
Alert, and Info. The description string is
provisionable and defaults to Aux #2 Input.
61186003L1-35D
D-1
MX2820 System TL1 Reference Guide
Table D-1. MX2820 SCU Alarm Data (Continued)
Condition Code
<CONDTYPE>
Alarm Level
Service
Affecting
(SRVEFF)
Description
AUX3A
Major
NSA
This alarm indicates External Alarm Input
number 3A on the rear of the shelf is active.
The default alarm level is Major and is
provisionable in the SCU alarm menus.
Provisionable alarm levels include: Critical,
Major, Minor, Alert, and Info. The description
string is provisionable and defaults to Aux
#3A Input. Aux 3A is active with solid input.
AUX3B
Major
NSA
This alarm indicates External Alarm Input
number 3B on the rear of the shelf is active.
The default alarm level is Major and is
provisionable in the SCU alarm menus.
Provisionable alarm levels include: Critical,
Major, Minor, Alert, and Info. The description
string is provisionable and defaults to Aux
#3B Input. Aux 3B is active with cadenced
input (1 second on, 1 second off).
PWRA
Major
SA
This alarm indicates a Power Bus A failure.
The default level is Major and is provisionable
in the SCU alarm menus. Provisionable
alarm levels include: Critical, Major, Minor,
Alert, and Info.
PWRB
Major
SA
This alarm indicates a Power Bus B failure.
The default level is Major and is provisionable
in the SCU alarm menus. Provisionable
alarm levels include: Critical, Major, Minor,
Alert, and Info.
IMPROPRMVL
Critical
SA
A linecard was removed leading to a service
outage.
IMPROPRMVL
Major
NSA
A standby linecard was removed leaving
service unaffected.
D-2
61186003L1-35D
Appendix D, Alarms and Alarm Condition Codes - M13 MUX Card Alarms
M13 MUX CARD ALARMS
Table D-2 provides the alarms for the M13 MUX card. Table entries with the T-x format, (for
example, T-CVL), provide PM data for both quarterly and daily threshold violations that are
sent from the NE to the OS/user. The threshold alarms are Auto Clearing (AC). The alarms in
this table are for transmission type T3 (rr=T3). The applicable TL1 command is RTRV-ALM-T3.
Table D-2. MX2820 M13 MUX Alarm Data
Entity Name
And
Description
DS3
Message
Type
REPT ALM
REPT EVT
61186003L1-35D
Second
Modifier
Notification
Code
Service
Affecting
(SRVEFF)
T3
CR
SA
LOS
OOF
Near end
Near end
MN
NSA
EXT
EXT-T3-NSA
EXT-T3-SA
EXT-T1-NSA
EXT-T1-SA
LOS
OOF
LOS-T1-MULT
LOS-T1-SNG
Far
Far
Far
Far
Far
Far
Far
Far
Far
SC
SA
TSA
Near end
SC
NSA
AIS
ISD
AIS
ISD
RAI
XCV
Far end
Far end
Near end
Near end
Near end
Near end
TC
NSA
T-CVL
T-ESL
T-SESL
T-LOSS-L
T-CVP-P
T-ESP-P
T-SESP-P
T-UASP-P
T-CVCP-P
T-ESCP-P
T-SESCP-P
T-UASCP-P
T-SAS-P
T-CVCP-PFE
T-ESCP-PFE
T-SESCP-PFE
T-UASCP-PFE
Near end
Near end
Near end
Near end
Near end
Near end
Near end
Near end
Near end
Near end
Near end
Near end
Near end
Far end
Far end
Far end
Far end
T3
Condition Type
<CONDTYPE>
Location
end
end
end
end
end
end
end
end
end
D-3
MX2820 System TL1 Reference Guide
Table D-2. MX2820 M13 MUX Alarm Data (Continued)
Entity Name
And
Description
DS1
Equipment
Message
Type
Second
Modifier
Notification
Code
Service
Affecting
(SRVEFF)
REPT ALM
T1
MJ
SA
LOS
Near end
REPT EVT
T1
SC
SA
TSA
Near end
SC
NSA
XCV
AIS
AIS-NTWK
Near end
Near end
Near end
TC
NSA
T-CVL
T-ESL
T-SESL
T-LOSS-L
T-AISS
Near
Near
Near
Near
Near
end
end
end
end
end
For P/N
1186002L3 Only:
T-CVL-LS
T-ESL-LS
T-SESL-LS
T-LOSS-L-LS
T-CVP-LS
T-ESP-LS
T-SESP-LS
T-UASP-LS
T-AISS-P-LS
T-CVP-HS
T-ESP-HS
T-SESP-HS
T-UASP-HS
T-AISS-P-HS
Near
Near
Near
Near
Near
Near
Near
Near
Near
Near
Near
Near
Near
Near
end
end
end
end
end
end
end
end
end
end
end
end
end
end
REPT ALM
REPT EVT
EQPT
EQPT
Condition Type
<CONDTYPE>
Location
MN*
CR
NSA
SA
EQPT
Near end
Near end
MN*
CR
NSA
SA
IMPROPRMVL
Near end
Near end
MN
NSA
CONTCOM
Near end
SC
NSA
WKSWPR
ESW
Near end
Near end
* This alarm will be reported as either Minor, Non-Service Affecting or Critical, Service Affecting depending on
whether protection is available.
D-4
61186003L1-35D
Appendix D, Alarms and Alarm Condition Codes - STS-1 MUX Card Alarms
STS-1 MUX CARD ALARMS
Table D-3 provides the alarms for the STS-1 MUX card. Table entries with the T-x format, (for
example, T-CVL), provide PM data for both quarterly and daily threshold violations that are
sent from the NE to the OS/user. The threshold alarms are AC. The alarms in this table are
for transmission type STS1 (rr=STS1). The applicable TL1 command is RTRV-ALM-STS1.
Table D-3. MX2820 STS-1 MUX Alarm Data
Entity Name
And
Description
STS1
Message
Type
Second
Modifier
Notification
Code
Service
Affecting
(SRVEFF)
REPT ALM
STS1
CR
SA
LOS
LOP
LOF
LOMF
UEQP
SLMP
Near end
REPT EVT
STS1
SC
SA
TSA
Near end
NSA
AIS-L
AIS-P
RFI-L
RFI-P
TIM-P
Near end
NSA
T-CVS
T-ESS
T-SESS
T-SEFS-S
T-CVL
T-ESL
T-SESL
T-UASL
T-CVP
T-ESP
T-SESP
T-UASP
T-PPJC-PDET
T-NPJC-PDET
Near end,
Quarterly,
Daily
T-CV-LFE
T-ES-LFE
T-SES-LFE
T-UAS-LFE
T-CV-PFE
T-ES-PFE
T-SES-PFE
T-UAS-PFE
Far end,
Quarterly,
Daily
TC
61186003L1-35D
Condition Type
<CONDTYPE>
Location
D-5
MX2820 System TL1 Reference Guide
Table D-3. MX2820 STS-1 MUX Alarm Data (Continued)
Entity Name
And
Description
VT
DS1
Equipment
Message
Type
Second
Modifier
Notification
Code
Service
Affecting
(SRVEFF)
Condition Type
<CONDTYPE>
Location
REPT ALM
VT1
MJ
SA
LOP-V
UNEQ-V
SLM-V
Near end
REPT EVT
VT1
SC
NSA
AIS-V
RFI-V
Near end
TC
NSA
T-CV-V
T-ES-V
T-SES-V
T-UAS-V
Near end,
Quarterly,
Daily
T-CV-VFE
T-ES-VFE
T-SES-VFE
T-UAS-VFE
Far end,
Quarterly,
Daily
REPT ALM
T1
MJ
SA
LOS
Near end
REPT EVT
T1
SC
SA
NSA
NSA
NSA
TSA
XCV
AIS
AIS-NTWK
Near end
TC
NSA
T-CVL
T-ESL
T-SESL
T-LOSS-L
T-AISS-P
Near end,
Quarterly,
Daily
MN*
CR
NSA
SA
EQPT
Near end
MN*
CR
NSA
SA
IMPROPRMVL
Near end
MN
NSA
CONTCOM
CLK-LOA
Near end
SC
NSA
WKSWPR
ESW
Near end
REPT ALM
REPT EVT
EQPT
EQPT
* This alarm will be reported as either Minor, Non-Service Affecting or Critical, Service Affecting depending on
whether protection is available.
D-6
61186003L1-35D
Appendix D, Alarms and Alarm Condition Codes - MX2820 Clock Card Alarms
MX2820 CLOCK CARD ALARMS
Table D-4 provides the alarms for the MX2820 Clock Card. The alarms in this table are for
transmission type EQPT (rr=EQPT). The applicable TL1 command is RTRV-ALM-EQPT.
Table D-4. MX2820 Clock Card Alarm Data
Entity Name
And
Description
Equipment
Message
Type
REPT ALM
REPT EVT
Second
Modifier
Notification
Code
Service
Affecting
(SRVEFF)
EQPT
MJ
NSA
HO
Near end
MN
NSA
EQPT
CONTCOM
Near end
Near end
MN*
CR
NSA
SA
IMPROPRMVL
Near end
Near end
MN
NSA
PRIFAIL
SECFAIL
Near end
Near end
SC
NSA
WKSWPR
ESW
Near end
Near end
EQPT
Condition Type
<CONDTYPE>
Location
* This alarm will be reported as either Minor, Non-Service Affecting or Critical, Service Affecting depending on
whether protection is available.
61186003L1-35D
D-7
MX2820 System TL1 Reference Guide
This page is intentionally blank.
D-8
61186003L1-35D
Appendix E
Autonomous Messages
INTRODUCTION
This appendix provides information about autonomous messages. Autonomous messages are
generated automatically by alarm conditions or events that occur at NEs. The ALW-MSG TL1
command allows the sending of autonomous messages to the OS/user. The INH-MSG TL1
command inhibits or prevents the sending of autonomous messages to the OS/user.
SYNTAX
An autonomous message for the MX2820 System has the following format:
<cr> <lf> <lf>
^^^<source identifier>^<date>^<time> <cr> <lf>
<almcde>^<atag>^<verb>[^<modifier> [^modifier>]] <cr> <lf>
^^^"<aid>:<message parameter>" <cr> <lf>
Table E-1 provides parameter (field) descriptions for autonomous messages.
Table E-1. Autonomous Messages Parameter Descriptions
Parameter
Description
<cr>
Carriage return
<lf>
Line feed
Caret (^)
Represents one space character
<source identifier>
The Shelf CLLI code
<date>
Date in the form YY-MM-DD
<time>
Time in the form HH-MM-SS
<almcde>
Alarm code. The alarm code indicates the severity of the autonomous message.
Valid values for <almcde> in decreasing order of severity are as
follows:
*C Critical alarm
**
Major alarm
*^
Minor alarm
A^ Non-alarm message
61186003L1-35D
E-1
MX2820 System TL1 Reference Guide
Table E-1. Autonomous Messages Parameter Descriptions (Continued)
Parameter
Description
<atag>
Autonomously Generated Correlation Tag (ATAG). The ATAG is
a decimal number assigned by the NE. The ATAG must be
sequential and must be included in all autonomous messages.
The ATAG allows an OS/user to determine if the OS has failed
to receive any Autonomous outputs by checking for omissions
in the sequence of messages received.
<verb>[^modifier>[^modifier>]]
Identifies the nature of the autonomous output and allows for
quick identification of the semantics of the information in the
text block. It consists of up to three valid TL1 identifiers separated by the space character (^). The first identifier (<verb>) is
the autonomous message verb and is a required entry. In most
cases, the verb in an autonomous message will be REPT
(Report). The autonomous message verb can have up to two
optional modifiers. The valid forms are as follows:
<verb>
<verb>^<modifier>
<verb>^<modifier>^<modifier>
The first modifier following the verb modifies the verb. The second modifier specifies the object generating the message. Certain modifiers (for example, EQPT) mean that the <AID>
parameter, if it exists, is addressing a particular type of entity in
the NE.
<message block>
Detailed data related to the specific alarm or report.
ALARMS
Autonomous alarms are sent only when users are currently logged onto the system, and only
after the users have entered an “ALW-MSG-xx” command to enable sending the alarms. The
xx field can be “ALL” or a specific transmission level such as T1. Another field in the
command, the <specific data block> field, can select all alarm categories or a specific alarm
such as MAJOR. A companion command, “INH-MSG-xx” inhibits all or selected types of
messages. The effects are cumulative such that a user could allow all alarms, and then inhibit
only the MINOR alarms. Once a user logs off the system, the autonomous alarms cease.
There is no specified or provisionable TL1 session-timeout period. If a user is logged into a TL1
account, the account remains active until the user explicitly logs out or the session is terminated (for example, TL1 over Telnet session closed, or X.25 connection lost).
E-2
61186003L1-35D
Appendix E, Autonomous Messages - SCU
SCU
In systems where INE mode CLIENT shelves are chained to a HOST SCU, and the user desires
autonomous alarms from the INE clients to be reported through the HOST, each INE CLIENT
shelf must be sent an ACT-USER, an ALW-MSG-xx by the user, and the user must remain
logged in to enable autonomous alarms from the CLIENT shelf. If the client shelves are in
EXPANSION mode, the client shelves are managed under the TID of the HOST SCU, and the
TL1 session and autonomous message activation is only required on the HOST SCU.
The SCU generates “Card Removed” alarm events when a card is inserted or removed. If the
card is removed while its service state is provisioned for Out-of-Service (OOS), the SCU
assigns an alarm level of INFO to the active alarm event. When a card is inserted, the SCU
assigns a level to the cleared event corresponding to the level of any previous active event if
present. Otherwise, the SCU assigns the alarm with the level that was provisioned for the
“Card Removed” alarm.
If a line card is removed with ACTIVE alarms, the SCU will automatically issue a CLEAR alarm
event for all active alarms.
EVENTS
Events are a variety of alarms which have a severity of MINOR. The format of the detailed data
is slightly different than that of the alarms in that the condition code and status fields are
reversed.
PERFORMANCE MONITORING REPORTS
Autonomous Performance Monitoring (PM) reports can be generated as a result of a
SCHED-PMREPT-rr command.
CONDITION CODES
Condition codes are assigned to identify specific reasons for the alarm or event. Refer to the
Alarms and Alarm Condition Codes” Appendix in this document for information about the
condition codes generated by the circuit cards in a MX2820 shelf.
61186003L1-35D
E-3
MX2820 System TL1 Reference Guide
AUTONOMOUS MESSAGE EXAMPLES
M13 MUX Alarms
The following examples are autonomous messages for alarms that apply to a DS3 MUX card.
Command Response from Network Element
REPT^ALM
Alarm Response
Example:
03-11-19 11:28:03
*C 240 REPT ALM T3
"1-T3-MUX3-1:CR,OOF,SA,11-19,11-28-03,NEND,,,,:\"DS3 OOF\""
;
*C
03-11-19 11:28:03
241 REPT ALM T3
"1-T3-MUX3-1:CR,LOS,SA,11-19,11-28-03,NEND,,,,:\"DS3 LOS\""
;
Corresponding Clears
Example:
A
03-11-19 11:28:42
243 REPT ALM T3
"1-T3-MUX3-1:CL,OOF,SA,11-19,11-28-42,NEND,,,,:\"DS3 OOF\""
;
03-11-19 11:28:42
A 244 REPT ALM T3
"1-T3-MUX3-1:CL,LOS,SA,11-19,11-28-42,NEND,,,,:\"DS3 LOS\""
;
E-4
61186003L1-35D
Appendix E, Autonomous Messages - Autonomous Message Examples
Threshold Alarms
The following examples are autonomous messages for threshold alarms. The first two
examples are for a M13 MUX card. The third example is for a DSX-1 card. Threshold alarms
are sent out as ALERTs. Threshold alarms are AC.
Command Response from Network Element
REPT^EVT
M13 MUX Alarm Response
Example:
03-11-19 11:28:36
A 242 REPT EVT T3
"1-T3-MUX3-1:RAI,SC,11-19,11-28-36,NEND,,,,:\"DS3 RAI\""
;
A
03-11-19 11:28:52
245 REPT EVT T3
"1-T3-MUX3-1:RAI,CL,11-19,11-28-52,NEND,,,,:\"DS3 RAI\""
;
03-11-19 11:43:24
A 258 REPT EVT T1
"1-T1-MUX3-1:T-LOSS-L,TC,11-19,11-43-24,NEND,,,,:\"DAY LOSS-L\""
;
Environmental Alarms
The following examples are autonomous messages for environmental alarms.
Command Response from Network Element
REPT^ALM^ENV
Alarm Response
Example:
03-11-19 11:31:34
** 252 REPT ALM ENV
"1-ENV-1:MJ,AUX1,11-19,11-31-34,\"AUX #1 INPUT\""
;
03-11-19 11:32:27
** 254 REPT ALM ENV
"1-ENV-3:MJ,AUX3A,11-19,11-32-27,\"AUX #3A INPUT\""
;
61186003L1-35D
E-5
MX2820 System TL1 Reference Guide
A
03-11-19 11:31:34
253 REPT ALM ENV
"1-ENV-1:CL,AUX1,11-19,11-31-34,\"AUX #1 INPUT\""
;
03-11-19 11:32:29
A 255 REPT ALM ENV
"1-ENV-3:CL,AUX3A,11-19,11-32-29,\"AUX #3A INPUT\""
;
E-6
61186003L1-35D
Appendix F
Performance Monitoring Codes
This appendix provides performance monitoring information for the M13 and STS-1
Multiplexer modules.
MONTYPE values for the RTRV-PM-rr commands are listed in Figure F-1 and Figure F-2.
M13 MUX
Table F-1. M13 MUX Performance Monitoring MONTYPE Values
Interval
MONTYPE Value
T3 Performance Monitoring rr Value = T3
Quarterly & Daily Near-End
SESL
LOSS-L
ESP-P
SESP-P
SAS-P
UASP-P
UASCP-P
CVL
CVP-P
ESL
CVCP-P
ESCP-P
SESCP-P
Quarterly & Daily Far-End
ESCP-PFE
SESCP-PFE
CVCP-PFE
UASCP-PFE
61186003L1-35D
F-1
MX2820 System TL1 Reference Guide
Table F-1. M13 MUX Performance Monitoring MONTYPE Values
Interval
MONTYPE Value
T1 Performance Monitoring rr = T1
Quarterly & Daily Near-End
CVL
ESL
SESL
LOSS-L
AISS-P
For P/N 1186002L3 Only:
CVL-LS
ESL-LS
SESL-LS
LOSS-L-LS
CVP-LS
ESP-LS
SESP-LS
UASP-LS
AISS-P-LS
CVP-HS
ESP-HS
SESP-HS
UASP-HS
AISS-P-HS
F-2
61186003L1-35D
Appendix F, Performance Monitoring Codes - STS-1 MUX
STS-1 MUX
Table F-2. STS-1 MUX Performance Monitoring MONTYPE Values
Interval
MONTYPE Value
STS1 Performance Monitoring rr = STS1
Quarterly & Daily Near-End
CVS
ESS
SESS
SEFS-S
CVL
ESL
SESL
UASL
CVP
ESP
SESP
UASP
PPJC-PDET
NPJC-PDET
Quarterly & Daily Far-End
CV-LFE
ES-LFE
SES-LFE
UAS-LFE
CV-PFE
ES-PFE
SES-PFE
UAS-PFE
61186003L1-35D
F-3
MX2820 System TL1 Reference Guide
Table F-2. STS-1 MUX Performance Monitoring MONTYPE Values (Continued)
Interval
MONTYPE Value
VT Performance Monitoring rr = VT1
Quarterly & Daily Near-End
CV-V
ES-V
SES-V
UAS-V
Quarterly & Daily Far-End
CV-VFE
ES-VFE
SES-VFE
UAS-VFE
T1 Performance Monitoring rr = T1
Quarterly & Daily Near-End
CVL
ESL
SESL
LOSS-L
AISS-P
F-4
61186003L1-35D
Appendix G
MX2820 Service States
INTRODUCTION
The purpose of this section is to describe the functionality of the service states of the MX2820
System.
The service state entities defined for the MX2820 modules follow a hierarchy as illustrated in
Figure G-1. Each entity has a Provisioned Service State and an Operational (Functional)
Service State.
The Provisioned Service State for a given entity can be set to In-Service (IS) or OOS. As with
other provisioning items, the Provisioned Service State values for all entities are saved to nonvolatile memory and are transferred among mate cards in a redundant configuration.
In addition to the Provisioned Service State, each entity has an Operational Service State. The
value of an entity's Operational Service State can assume one of several defined values and is
influenced by both the entity's Provisioned Service State and current conditions. For DS1/E1
entities, the Traditional State of the channel (described later) also influences the Operational
Service State.
Limitations of Diagrams
The Service State diagrams are designed to show the main flow of events only. There is no way
to add all possible event transitions to these diagrams while keeping them readable. The
Service State tables are the only place to get a complete definition of all events that can occur
in a given state. Use the diagrams for conceptual reference only.
Event Priorities
The service state tables and diagrams indicate how the product will respond to various events.
For some cases, especially with the diagrams, it can not be obvious from the diagrams about
which conditions should be considered before others in determining an entity's next operational state. To help clarify such questions, all tables should generally be read from the top
down in an “If-Else” fashion.
Criteria Monitored for an Entity
In general, criteria that are monitored for a given state of a given entity are specific to that
entity. For example, when the diagram or service state table for the DS1 #3 facility OOS-MA
state indicates that it monitors for “Fault - SA”, it is implied that it refers only to serviceaffecting faults specific to DS1 #3.
61186003L1-35D
G-1
MX2820 System TL1 Reference Guide
SCU and Clock Modules Entity Hierarchy
EQUIPMENT
M13 MUX Module Entity Hierarchy
DS1/E1
FACILITY #1
EQUIPMENT
Parent
DS3 FACILITY
Child
DS1/E1
FACILITY #2
Parent
DS1/E1
FACILITY #28
Child
STS-1 MUX Module Entity Hierarchy
VT
PATH #1
EQUIPMENT
Parent
EC-1/STS-1
FACILITY
Child
VT
PATH #2
Parent
VT
PATH #28
Child
Parent
CROSS-CONNECT
DS1/E1
FACILITY #1
DS1/E1
FACILITY #2
DS1/E1
FACILITY #28
Child
Figure G-1. MX2820 System Service State Hierarchy
G-2
61186003L1-35D
Appendix G, MX2820 Service States - Introduction
Definition of AINS Criteria
The term AINS stands for “Automatic In-Service” and applies to any DS1/E1 facility whose
Traditional State is Auto-enabled. This term is used to describe the criteria that must be met
to bring the facility out of the OOS-AU FLT, AINS state.
The AINS criteria generally require that a DS1/E1 facility must be out of a LOS condition
continuously for a specified length of time. The user sets this length of time with the “autoenable delay” feature.
Definitions of Available and Unavailable
The terms “available” and “unavailable” apply to the M13 and STS-1 modules to distinguish
DS1/E1 facility and VT path entities that can and cannot be used when the product is provisioned for E1 mode.
For the M13 module, each of the seven DS2 channels can be independently provisioned for
either T1 or E1 mode operation. For any DS2 channel operating in T1 mode, all four DS1 facilities of that DS2 are “available”. For any DS2 channel operating in E1 mode, the first three E1
facility entities are “available” and the fourth entity is “unavailable”.
For the STS-1 module, all seven VT groups are provisioned together for either T1 or E1 mode
operation. When operating in T1 mode, all 28 VT path entities and all 28 DS1 facility entities
are “available”. When operating in E1 mode, VT path entities 22-28 and DSX facility entities
22-28 are “unavailable” and the remaining entities are “available”.
Recursive alarm suppression
When any parent entity is managed out of service, alarms are in turn suppressed for all of the
parent's child entities.
This behavior is implemented such that, in general, when a parent entity is in any operational
state that suppresses alarms, the operational states of all of the parent's child entities are set
to OOS-AUMA, SGEO, regardless of the provisioned service states of the child entities.
When the parent entity is managed in-service, the parent's child entities in turn transition to
the appropriate states and allow or suppress alarms normally per their own provisioning and
conditions.
An example of this behavior is that when the equipment provisioned service state of the M13
module is set to OOS, the DS3 operational state then transitions to OOS-AUMA, SGEO, which
in turn causes the DS1 operational states to follow suit. The provisioned service states of the
DS3 and DS1/E1 entities remain unchanged, and alarm reporting for all entities is
suppressed.
Traditional States
The term “Traditional State” applies to the M13 and STS-1 modules to refer to the “T1/E1
State” feature that has been and is presently supported in all multiplexer products of the
MX2800/MX2820 product family.
61186003L1-35D
G-3
MX2820 System TL1 Reference Guide
The Traditional State for each T1/E1 facility can be provisioned with one of the following three
settings:
• Disabled: The channel is inhibited from carrying bi-directional traffic. The DS1/E1
transmitter is turned off and an unframed all-ones pattern is transmitted toward the
network. No alarms are reported for the facility (including the attached VT if applicable).
• Enabled: The facility conducts bi-directional traffic and full alarm reporting is allowed for
the facility (as well as for the attached VT if applicable).
• Auto-enabled: The facility conducts bi-directional traffic and all alarms for the channel (as
well as for the attached VT if applicable) are suppressed until a DS1/E1 signal is detected
continuously at the receiver for a time period specified by the product's “auto-enable delay”
setting. Upon detection of the incoming signal for the required length of time, the
Traditional State of the facility will automatically transition to Enabled.
Backward Compatibility with Traditional States
The service state features of the MX2820 M13 and STS-1 modules are designed both to coexist
with and to be backward compatible with the Traditional States.
Generally, the service state features of the MX2820 modules are designed to be transparent to
users who do not make use of service states. The default provisioned service state is in-service
(IS) for all entities. The user can leave the entities provisioned in-service at all times and
expect the product to function no differently than before service state support was implemented.
A consequence of the backward compatibility with Traditional States is some degree of
departure from some traditional service state behaviors as they are described in GR-1093.
An example of such a departure involves provisioning and maintenance activities. The GR1093 standard generally states that updates of provisioning data and the performance of
maintenance activities should not be permitted for entities that have assumed certain service
states. The MX2820 M13 and STS-1 mux modules are designed to allow the user to perform
such activities independently of the provisioned and functional service states of any entity.
G-4
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Equipment
OPERATIONAL SERVICE STATE MODEL FOR EQUIPMENT
Independent Equipment Service States
Each module keeps a record of its own provisioned and operational equipment service states
as well as those of its mate module (if applicable) (refer to Figure G-2). The provisioned service
state of the equipment entity for each module can be set to IS or OOS independently of the
settings of its mate module. If operating non-redundantly, the provisioned service state for the
absent stand-by module can be provisioned as either IS or OOS. Its value will reside on the
active module and will automatically be applied to the mate module (if applicable) when and if
it is installed. This is a limited but necessary form of pre-provisioning due to the need for an
independent equipment service state for each module. The operational service state of an
absent stand-by module that resides on the active module is E6 (OOS-AUMA UAS, UEQ).
Indication of the Active Module
Due to the nature of the equipment service states, the operational service state of the
equipment entity alone cannot reliably indicate which module in a redundant pair is active
and which is stand-by.
ED:IS
State E3
OOS-MA
State E6
OOS-AUMA
UAS, UEQ
Flt SA
No Flt SA;
Flt NSA
ED:OOS
All Flt
Recovered
All Flt
Recovered
State E1a
IS
ACT
State E4a
OOS-AUMA
FLT
Protection
Switch
Flt SA
No Flt SA;
Flt NSA
ED:IS
ED:IS
ED:OOS
State E1b
IS
STBYH
State E4b
OOS-MA
FLT
Flt SA
All Flt
Recovered
State E5a
OOS-AU
FLT
ED:OOS
Flt SA
State E5b
IS-ANR
No Flt SA;
Flt NSA
All Flt
Recovered
No Flt SA;
Flt NSA
Figure G-2. Equipment Service States
61186003L1-35D
G-5
MX2820 System TL1 Reference Guide
State E1a: IS ACT
Description:
The card is installed and is performing its intended functions.
Provisioned State:
IS
On Entry to State:
Allow alarms for this entity.
Table G-1 shows the state transitions.
Table G-1. State E1a: IS ACT
Event
Action or Condition
Next State
TL1 DENY:SNVS
---
EDIT:IS
None
---
EDIT:OOS
None
E3
SW-TOPROTN and card is A
None
E1b
SW-TOPROTN and card is B.
TL1 DENY:SNVS
---
SW-TOWKG and card is A
TL1 DENY:SNVS
---
SW-TOWKG and card is B
None
E1b
Fault SA
None
E5a
No Fault SA; Fault NSA
None
E5b
All faults clear
None
---
ENT,DLT
NOTE
It is not possible for the protect card (card B) to be in state E1a
because the protection switch alarm should be active, which would
in turn cause the service state to transition to E5b.
G-6
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Equipment
State E1b: IS STDBYH
Description:
The card is installed and would be performing its intended
functions if it were not the standby card.
Provisioned State:
IS
On Entry to State:
Suppress alarms for this entity.
Table G-2 shows the state transitions.
Table G-2. State E1b: IS STDBYH
Event
Action or Condition
Next State
TL1 DENY:SNVS
---
EDIT:IS
None
---
EDIT:OOS
None
E3
TL1 DENY:SNVS
---
Active Card
None
E1a
Fault SA
None
E5a
No Fault SA; Fault NSA
None
E5b
All faults clear
None
---
ENT,DLT
SW
State E3: OOS-MA
Description:
The card is manually provisioned out-of-service. No equipmentlevel fault conditions are present.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this entity.
Table G-3 shows the state transitions.
Table G-3. State E3: OOS-MA
Event
Action or Condition
Next State
TL1 DENY:SNVS
---
EDIT:IS and active card
None
E1a
EDIT:IS and standby card
None
E1b
EDIT:OOS
None
---
Fault SA
None
E4a
No Fault SA; Fault NSA
None
E4b
All faults clear
None
---
ENT,DLT
61186003L1-35D
G-7
MX2820 System TL1 Reference Guide
State E4a: OOS-AUMA FLT
Description:
The card is manually provisioned out-of-service and presently
has one or more service affecting equipment-level fault
conditions present.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this entity.
Table G-4 shows the state transitions.
Table G-4. State E4a: OOS-AUMA FLT
Event
Action or Condition
Next State
TL1 DENY:SNVS
---
EDIT:IS
None
E5a
EDIT:OOS
None
---
Fault SA
None
–
No Fault SA; Fault NSA
None
E4b
All faults clear
None
E3
ENT,DLT
State E4b: OOS-MA FLT
Description:
The card is manually provisioned out-of-service and presently
has one or more non-service affecting and no service-affecting
equipment-level fault conditions present.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this entity.
Table G-5 shows the state transitions.
Table G-5. State E4b: OOS-MA FLT
Event
Action or Condition
Next State
TL1 DENY:SNVS
---
EDIT:IS
None
E5b
EDIT:OOS
None
---
Fault SA
None
E4a
No Fault SA; Fault NSA
None
–
All faults clear
None
E3
ENT,DLT
G-8
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Equipment
State E5a: OOS-AU FLT
Description:
The card presently has one or more service affecting equipmentlevel fault conditions present.
Provisioned State:
IS
On Entry to State:
Allow alarms for this entity.
Table G-6 shows the state transitions.
Table G-6. State E5a: OOS-AU FLT
Event
Action or Condition
Next State
TL1 DENY:SNVS
---
EDIT:IS
None
–
EDIT:OOS
None
E4a
Fault SA
None
–
No Fault SA; Fault NSA
None
E5b
If Active card
E1a
Else If Standby card
E1b
ENT,DLT
All faults clear
State E5b: IS-ANR
Description:
The card has one or more non-service affecting and no service
affecting equipment-level fault conditions for this entity
present.
Provisioned State:
IS
On Entry to State:
Allow alarms for this entity.
Table G-7 shows the state transitions.
Table G-7. State E5b: IS-ANR
Event
Action or Condition
Next State
TL1 DENY:SNVS
---
EDIT:IS
None
–
EDIT:OOS
None
E4b
Fault SA
None
E5a
No Fault SA; Fault NSA
None
–
If Active card
E1a
Else If Standby card
E1b
ENT,DLT
All faults clear
61186003L1-35D
G-9
MX2820 System TL1 Reference Guide
State E6: OOS-AUMA UAS, UEQ
Description:
This is the operational state that the active module assigns to
its stand-by module when it is not detected by the active
module.
Provisioned State:
IS or OOS
On Entry to State:
No action
Table G-8 shows the state transitions.
Table G-8. State E5b: IS-ANR
Event
Install module
G-10
Action or Condition
Next State
None
E1b
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
OPERATIONAL SERVICE STATE MODEL FOR FACILITIES
This state applies to the following entities (refer to Figure G-3, Figure G-4, and Figure G-5):
• EC-1/STS-1 facility (for the STS-1 module only)
• DS3 facility (for the M13 module only)
• DS1/E1 facilities (for both the M13 and STS-1 modules)
The Network Facility
The DS3 facility entity (for the M13 module) and the EC-1/STS-1 facility entity (for the STS-1
module) are herein described as the “network facility”.
Network Facility vs. DS1/E1 Facility Behavior
All of the facility service states apply for all DS1/E1 facility entities for both the M13 and STS1 mux modules. The network facility for both products follows the same state behavior as
DS1/E1 facilities, but are always considered to have a traditional state of Enabled (AINS
criteria are satisfied). Therefore some service state transitions will not apply for the network
facility entity.
Special Note about the EC-1/STS-1 Facility
For the STS-1 module, the EC-1 interface can never carry anything other than an STS-1 path
payload. For that reason, and also for simplicity of design, a single facility entity is defined for
the network interface instead of the definition of two separate entities for an EC-1 facility and
an STS-1 path entity.
61186003L1-35D
G-11
MX2820 System TL1 Reference Guide
ED:OOS
F3a
(OOS-AUMA FLT)
State F7a
OOS-AU
FLT
Supporting
Entity Outage
No Flt SA;
Flt NSA
All Flt
Recovered
ED:OOS
State F7b
IS-ANR
Flt SA
(OOS-MA FLT)
Supporting
Entity
Outage
All Flt
Recovered
Flt SA
State F6
OOS-AU
SGEO
ED:OOS
Supporting Entity
Suppresses Alarms
F8
Supporting
Entity Restored
and...
Flt SA
No Flt SA;
Flt NSA
F3b
Supporting
Entity Outage
No Flt SA;
Flt NSA
State F5
IS-ACT
ED:OOS
F7a
F2
(OOS-AU FLT)
(OOS-MA)
F7b
(IS-ANR)
(OOS-AUMA SGEO)
All Flt
Recovered
F5
(IS-ACT)
Figure G-3. Facility Service States, Provisioned Service State = IS
G-12
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
F7a
(OOS-AU FLT)
ED:IS
State F3a
OOS-AUMA
FLT
Supporting
Entity Outage
All Flt
Recovered
No Flt SA;
Flt NSA
State F3b
OOS-MA
FLT
Flt SA
Supporting
All Flt
Entity
Recovered
Outage
Flt SA
State F8
OOS-AUMA
SGEO
Facility is Provisioned IS and
Supporting Entity Allows Alarms
and...
F4
AINS Criteria
Not Satisfied
Facility is Provisioned OOS and
Supporting Entity Restored
and...
Flt SA
(OOS-AU FLT, AINS)
F6
Supporting
Entity Outage
No Flt SA;
Flt NSA
(OOS-AU SGEO)
All Flt
Recovered
F7b
(IS-ANR)
No Flt SA;
Flt NSA
State F2
OOS-MA
ED:IS
and...
AINS Criteria
Not Satisfied
F3a
F4
(OOS-AU FLT, AINS)
(OOS-AUMA FLT)
AINS Criteria
Satisfied
ED:IS
AINS Criteria
Satisfied
F3b
F5
(OOS-MA FLT)
(IS-ACT)
F2
(OOS-MA)
Figure G-4. Facility Service States, Provisioned Service State = OOS
61186003L1-35D
G-13
MX2820 System TL1 Reference Guide
State F1a
OOS-AUMA
UAS
Unavailable
Available
Supporting Entity
Suppresses Alarms
F8
(OOS-AUMA SGEO)
From F1b Only:
ENT:IS or ENT:OOS
Results in Changing
Tradtional State to
Enabled
State F1b
OOS-MA
UAS
No Supporting
Entity Outage
Enabled or Auto-enabled
F5
(IS-ACT)
Supporting Entity
Outage
F6
(OOS-AU SGEO)
AINS Criteria
Satisfied,
and...
Disabled
Any Facility that is
Unavailable is
Considered to be
Disabled
Change of
Facility Traditional
State
Facility is Provisioned IS and
AINS Criteria is NOT Satisfied
State F4
OOS-AU
ED:IS
FLT, AINS
and...
ED: OOS
and...
Supporting Entity
Outage
F8
(OOS-AUMA SGEO)
DLT (Sets to Disabled)
No Supporting
Entity Outage
F2
(OOS-MA)
Any State
Figure G-5. Other Facility Service States, Traditional State
G-14
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
Change of Facility Traditional State
Description:
The following transitions apply whenever the Traditional State
of the facility is changed. Below is a description of how each
change should be handled.
Table G-9 shows the state transitions.
Table G-9. Change of Facility Traditional State
Event
Action or Condition
Next State
Provisioned IS and AINS criteria NOT
satisfied
None
F4
Disabled
None
F1b
NOTE
The traditional states of the DS3 or EC-1/STS-1 facilities are considered to always be Enabled (AINS criteria satisfied).
NOTE
Note: For DS3 and EC-1/STS-1 facilities, a TL1 DENY:SNVS
response is returned due to a DLT command. The DLT command is
valid only for DS1/E1 facilities.
State F1a: OOS-AUMA UAS
Description:
This facility is not available and does not pass data.
Provisioned State:
IS or OOS
On Entry to State:
Suppress alarms for this entity.
Table G-10 shows the state transitions.
Table G-10. State F1a: OOS-AUMA UAS
Event
Action or Condition
Next State
None
F1b
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
---
EDIT:IS
TL1 DENY:SNVS
---
EDIT:OOS
TL1 DENY:SNVS
---
Facility becomes available
61186003L1-35D
G-15
MX2820 System TL1 Reference Guide
State F1b: OOS-MA UAS
Description:
This facility is available but its Traditional State is disabled. The
facility does not pass data.
Provisioned State:
IS or OOS
On Entry to State:
Suppress alarms for this entity.
Table G-11 shows the state transitions.
Table G-11. State F1b: OOS-MA UAS
Event
Action or Condition
Next State
None
F1a
ENT
TL1 DENY:SNVS
---
DLT
None
---
EDIT:IS
TL1 DENY:SNVS
---
EDIT:OOS
TL1 DENY:SNVS
---
Enabled
None
F4
Auto-enabled
None
F4
Disabled
None
---
Facility becomes unavailable
G-16
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
State F2: OOS-MA
Description:
The facility has been manually provisioned out of service and no
fault conditions are present for the entity.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this entity.
Table G-12 shows the state transitions.
Table G-12. State F2: OOS-MA
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
If AINS criteria not satisfied
F4
Else If Enabled
F5
Else
---
EDIT:OOS
None
---
Supporting Entity Outage
None
F8
Fault SA
None
F3a
No Fault SA; Fault NSA
None
F3b
All faults clear
None
---
EDIT:IS
61186003L1-35D
G-17
MX2820 System TL1 Reference Guide
State F3a: OOS-AUMA FLT
Description:
The facility is provisioned OOS and at least one service affecting
fault condition for this facility is present.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this entity.
Table G-13 shows the state transitions.
Table G-13. State F3a: OOS-AUMA FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
EDIT:IS
None
F7a
EDIT:OOS
None
---
Supporting Entity Outage
None
F8
Fault SA
None
---
No Fault SA; Fault NSA
None
F3b
All faults clear
None
F2
G-18
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
State F3b: OOS-MA FLT
Description:
The facility is provisioned OOS and at least one non-service
affecting and zero service affecting fault conditions for this
facility is present.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this entity.
Table G-14 shows the state transitions.
Table G-14. State F3b: OOS-MA FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
EDIT:IS
None
F7b
EDIT:OOS
None
---
Supporting Entity Outage
None
F8
Fault SA
None
F3a
No Fault SA; Fault NSA
None
---
All faults clear
None
F2
61186003L1-35D
G-19
MX2820 System TL1 Reference Guide
State F4: OOS-AU FLT, AINS
Description:
AINS criteria are not satisfied.
Provisioned State:
IS
On Entry to State:
Suppress alarms and reset the AINS timer for this entity.
Monitor conditions per AINS criteria.
Table G-15 shows the state transitions.
Table G-15. State F3b: OOS-MA FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
None
---
If SGEO Present
F8
Else
F2
None
F8
If SGEO Present
F6
Else
F5
EDIT:IS
EDIT:OOS
Supporting Entity Suppresses Alarms
AINS Criteria Satisfied
G-20
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
State F5: IS-ACT
Description:
The facility is provisioned IS and no fault conditions are present
for this facility.
Provisioned State:
IS
On Entry to State:
Allow alarms for this entity.
Table G-16 shows the state transitions.
Table G-16. State F5: IS-ACT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
EDIT:IS
None
---
EDIT:OOS
None
F2
Supporting Entity Outage
None
F6
Fault SA
None
F7a
No Fault SA; Fault NSA
None
F7b
All faults clear
None
---
61186003L1-35D
G-21
MX2820 System TL1 Reference Guide
State F6: OOS-AU SGEO
Description:
The facility's supporting entity is in an outage.
Provisioned State:
IS
On Entry to State:
Allow alarms for this entity.
Table G-17 shows the state transitions.
Table G-17. State F6: OOS-AU SGEO
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
EDIT:IS
None
---
EDIT:OOS
None
F8
Supporting Entity Suppresses Alarms
None
F8
If Fault SA
F7a
Else if Fault NSA
F7b
Else
F5
None
---
Supporting Entity Restored from Outage
Condition
Supporting Entity Outage
G-22
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
State F7a: OOS-AU FLT
Description:
The facility is provisioned IS and at least one service affecting
fault condition for this facility is present.
Provisioned State:
IS
On Entry to State:
Allow alarms for this entity.
Table G-18 shows the state transitions.
Table G-18. State F7a: OOS-AU FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
EDIT:IS
None
---
EDIT:OOS
None
F3a
Supporting Entity Outage
None
F6
Fault SA
None
---
No Fault SA; Fault NSA
None
F7b
All faults clear
None
F5
61186003L1-35D
G-23
MX2820 System TL1 Reference Guide
State F7b: IS-ANR
Description:
The facility is provisioned IS and at least one non-service affecting and zero service affecting fault conditions for this facility are
present.
Provisioned State:
IS
On Entry to State:
Allow alarms for this entity.
Table G-19 shows the state transitions.
Table G-19. State F7a: OOS-AU FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
EDIT:IS
None
---
EDIT:OOS
None
F3b
Supporting Entity Outage
None
F6
Fault SA
None
F7a
No Fault SA; Fault NSA
None
---
All faults clear
None
F5
G-24
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for Facilities
State F8: OOS-AUMA SGEO
Description:
1. The facility is provisioned OOS and the supporting entity is in
an outage.
or
2. The facility is provisioned IS and its supporting entity
suppresses alarms.
Provisioned State:
IS or OOS
On Entry to State:
Suppress alarms for this entity.
Table G-20 shows the state transitions.
Table G-20. State OOS-AUMA SGEO
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
Set Traditional State to
Disabled
F1b
If AINS Criteria NOT
Satisfied
F4
Else if Enabled
F6
Else
---
If Fault SA
F3a
Else If Fault NSA
F3b
Else
F2
Entity is provisioned IS and supporting
entity allows alarms
Entity is provisioned OOS and
Supporting Entity Restored from Outage
Condition
61186003L1-35D
G-25
MX2820 System TL1 Reference Guide
OPERATIONAL SERVICE STATE MODEL FOR VT PATHS
This state applies to the following entities (refer to Figure G-6, Figure G-7, and Figure G-8):
• VT1.5/VT2 entities (for the STS-1 module only)
Operation in T1 mode
When the product is provisioned for T1 mode, all seven VT groups in the STS-1 path are
configured to each carry four VT1.5 paths. All 28 VT path entities are available and all 28
DS1/E1 facility entities are available. Any available VT1.5 path can be uniquely crossconnected to any available DS1/E1 facility.
Operation in E1 mode
When the product is provisioned for E1 mode, all seven VT groups in the STS-1 path are
configured to each carry three VT2 paths. VT path entities 1-21 are available and DS1/E1
facility entities 1-21 are available. Any available VT2 path can be uniquely cross-connected to
any available DS1/E1 facility. VT path entities 22-28 and DS1/E1 facility entities 22-28 are
not available for use.
ED:OOS
P3a
(OOS-AUMA FLT)
State P7a
OOS-AU
FLT
Supporting
Entity Outage
No Flt SA;
Flt NSA
All Flt
Recovered
ED:OOS
State P7b
IS-ANR
State P6
OOS-AU
SGEO
ED:OOS
Supporting Entity
Suppresses Alarms
P8
Supporting
Entity Restored
and...
Flt SA
No Flt SA;
Flt NSA
(OOS-MA FLT)
Flt SA
Supporting
All Flt
Entity
Recovered
Outage
Flt SA
Supporting
Entity Outage
P3b
No Flt SA;
Flt NSA
State P5
IS-ACT
ED:OOS
P7a
P2
(OOS-AU FLT)
(OOS-MA)
P7b
(IS-ANR)
(OOS-AUMA SGEO)
All Flt
Recovered
P5
(IS-ACT)
Figure G-6. VT Service States, Provisioned Service State = IS
G-26
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for VT Paths
ED:IS
P7a
(OOS-AU FLT)
State P3a
OOS-AUMA
FLT
Supporting
Entity Outage
All Flt
Recovered
No Flt SA;
Flt NSA
State P3b
OOS-MA
FLT
Flt SA
Supporting
All Flt
Entity
Recovered
Outage
ED:IS and
Supporting Entity
Allows Alarms
State P2
OOS-MA
Supporting
Entity Outage
ED:IS
ED:OOS and Supporting
Entity Restored
and...
Flt SA
P7b
(IS-ANR)
No Flt SA;
Flt NSA
Flt SA
State P8
OOS-AUMA
SGEO
ED:IS
P3a
(OOS-AUMA FLT)
No Flt SA;
Flt NSA
P6
(OOS-AU SGEO)
P3b
P5
(OOS-MA FLT)
(IS-ACT)
All Flt
Recovered
P2
(OOS-MA)
Figure G-7. VT Service States, Provisioned Service State = OOS
State P1a
OOS-AUMA
UAS
Any VT that is
Unavailable is
Considered to be
Unequipped
Any State
(except P1a)
Unavailable
Unequipped
Equipped and
Attached DS1/E1 is Disabled
Available
State P4
OOS-MA
SDEA
State P1b
OOS-MA
UAS
Equipped
Attached DS1/E1 is
Enabled or Auto-enabled
P2
(OOS-MA)
Figure G-8. Other VT Service States
61186003L1-35D
G-27
MX2820 System TL1 Reference Guide
Effects of the Traditional State for an Attached DS1/E1 Facility
The transitions shown in Table G-21 apply whenever the traditional state of the port is
changed. Below is a description of how each change should be handled.
Table G-21. Transition Conditions
Current Condition
Action or Condition
Next State
VT is equipped and the attached DS1/E1
facility is Disabled
VT is provisioned IS
P1b
VT is provisioned OOS
P1b
VT is provisioned IS
P5
VT is provisioned OOS
P2
VT is equipped and AINS conditions are
not satisfied for the attached DS1/E1
facility
A VT entity's provisioned service state does not change when it is either unequipped or is
equipped but the traditional state of its attached DS1/E1 is Disabled. The operational state of
the VT will, however, reflect the fact that the VT is managed OOS. Control of setting an entity's
provisioned service state is always left to the user.
When a DS1/E1 facility is unmapped from a VT, its traditional state is automatically set to
Disabled.
When the DS1/E1 facility is remapped to a VT, its traditional state is automatically set to
Auto-enabled (and so its AINS timer is reset). The operational service states for VT and DS1/
E1 facilities will then transition appropriately.
Whenever the traditional state of a DS1/E1 facility is Disabled and is mapped to a VT, the
operational service state of the VT transitions to P1b (OOS-MA, UAS) regardless of the VT
path's provisioned service state. The reasoning behind this behavior is that manually
disabling a DS1/E1 facility is a form of explicitly managing the entire channel (VT path and
DS1/E1) out of service. Therefore, it is considered appropriate to transition the VT to a state
that indicates that the VT is managed out of service (even if the provisioned service state is inservice).
G-28
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for VT Paths
State P1a: OOS-AUMA UAS
Description:
This VT is not available, and therefore is not cross-connected to
a DS1/E1 facility. The VT does not pass data.
Provisioned State:
IS or OOS
On Entry to State:
Suppress alarms for this VT.
Table G-22 shows the state transitions.
Table G-22. State P1a: OOS-AUMA UAS
Event
Action or Condition
Next State
None
P4
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
ENT-CRS
TL1 DENY:SNVS
---
EDIT:IS
TL1 DENY:SNVS
---
EDIT:OOS
TL1 DENY:SNVS
---
VT becomes available
61186003L1-35D
G-29
MX2820 System TL1 Reference Guide
State P1b: OOS-MA UAS
Description:
This VT is available but is cross-connected to a DS1/E1 facility
whose traditional state is Disabled. The VT does not pass data.
Provisioned State:
IS or OOS
On Entry to State:
Suppress alarms for this VT.
Table G-23 shows the state transitions.
Table G-23. State P1b: OOS-MA UAS
Event
Action or Condition
Next State
VT becomes unequipped
None
P4
VT is equipped with a DS1/E1 facility
whose traditional state is not Disabled.
None
P2
VT is equipped with a DS1/E1 facility
whose traditional state is Disabled.
None
---
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
ENT-CRS
TL1 DENY:SNVS
---
EDIT:IS
TL1 DENY:SNVS
---
EDIT:OOS
TL1 DENY:SNVS
---
G-30
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for VT Paths
State P2: OOS-MA
Description:
This VT is available and cross-connected to a DS1/E1 facility.
The VT has been manually provisioned out of service and no
fault conditions are present for the VT.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this VT.
Table G-24 shows the state transitions.
Table G-24. State P2: OOS-MA
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
EDIT:IS
None
P5
EDIT:OOS
None
---
Supporting Entity Outage
None
P8
Fault SA
None
P3a
No Fault SA; Fault NSA
None
P3b
All faults clear
None
---
61186003L1-35D
G-31
MX2820 System TL1 Reference Guide
State P3a: OOS-AUMA FLT
Description:
This VT is available and cross-connected to a DS1/E1 facility.
The VT is provisioned OOS and at least one service affecting
fault condition for this VT is present.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this VT.
Table G-25 shows the state transitions.
Table G-25. State P3a: OOS-AUMA FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
EDIT:IS
None
P7a
EDIT:OOS
None
---
Supporting Entity Outage
None
P8
Fault SA
None
---
No Fault SA; Fault NSA
None
P3b
All faults clear
None
P2
G-32
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for VT Paths
State P3b: OOS-MA FLT
Description:
This VT is available and cross-connected to a DS1/E1 facility.
The VT is provisioned OOS and at least one non-service affecting and no service affecting fault conditions for this VT is
present.
Provisioned State:
OOS
On Entry to State:
Suppress alarms for this VT.
Table G-26 shows the state transitions.
Table G-26. State P3b: OOS-MA FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
EDIT:IS
None
P7b
EDIT:OOS
None
---
Supporting Entity Outage
None
P8
Fault SA
None
P3a
No Fault SA; Fault NSA
None
---
All faults Clear
None
P2
61186003L1-35D
G-33
MX2820 System TL1 Reference Guide
State P4: OOS-MA, SDEA
Description:
The VT is available but is not cross-connected to a DS1/E1
facility.
Provisioned State:
IS or OOS
On Entry to State:
Suppress alarms for this VT.
Table G-27 shows the state transitions.
Table G-27. State P4: OOS-MA, SDEA
Event
Action or Condition
Next State
None
P1a
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
None
P2
TL1 DENY:SNVS
---
None
---
VT becomes unavailable
VT becomes equipped
EDIT:IS
EDIT:OOS
G-34
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for VT Paths
State P5: IS-ACT
Description:
This VT is available and cross-connected to a DS1/E1 facility.
The VT is provisioned IS and no fault conditions are present for
this VT.
Provisioned State:
IS
On Entry to State:
Allow alarms for this VT.
Table G-28 shows the state transitions.
Table G-28. State P5: IS-ACT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
EDIT:IS
None
---
EDIT:OOS
None
P2
Supporting Entity Outage
None
P6
Fault SA
None
P7a
No Fault SA; Fault NSA
None
P7b
All faults clear
None
---
61186003L1-35D
G-35
MX2820 System TL1 Reference Guide
State P6: OOS-AU SGEO
Description:
This VT is available and cross-connected to a DS1/E1 facility.
The VT's supporting entity is in an outage.
Provisioned State:
IS
On Entry to State:
Allow alarms for this VT.
Table G-29 shows the state transitions.
Table G-29. State P6: OOS-AU SGEO
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
EDIT:IS
None
---
EDIT:OOS
None
P8
Supporting entity suppresses alarms
None
P8
If Fault SA
P7a
Else if Fault NSA
P7b
Else
P5
None
---
Supporting Entity Restored
Supporting Entity Outage
G-36
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for VT Paths
State P7a: OOS-AU FLT
Description:
This VT is available and cross-connected to a DS1/E1 facility.
The VT is provisioned IS and at least one service affecting fault
condition for this VT is present.
Provisioned State:
IS
On Entry to State:
Allow alarms for this VT.
Table G-30 shows the state transitions.
Table G-30. State P7a: OOS-AU FLT
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
EDIT:IS
None
---
EDIT:OOS
None
P3a
Supporting Entity Outage
None
P6
Fault SA
None
---
No Fault SA; Fault NSA
None
P7b
All faults clear
None
P5
61186003L1-35D
G-37
MX2820 System TL1 Reference Guide
State P7b: IS-ANR
Description:
This VT is available and cross-connected to a DS1/E1 facility.
The VT is provisioned IS and at least one non-service affecting
and no service affecting fault conditions for this VT are present.
Provisioned State:
IS
On Entry to State:
Allow alarms for this VT.
Table G-31 shows the state transitions.
Table G-31. State P7b: IS-ANR
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
EDIT:IS
None
---
EDIT:OOS
None
P3b
Supporting Entity Outage
None
P6
Fault SA
None
P7a
No Fault SA; Fault NSA
None
---
All faults clear
None
P5
G-38
61186003L1-35D
Appendix G, MX2820 Service States - Operational Service State Model for VT Paths
State P8: OOS-AUMA SGEO
Description:
This VT is available and cross-connected to a DS1/E1 facility.
In addition:
1.
The VT is provisioned OOS and the supporting entity is in an
outage.
or
2.
The VT is provisioned IS and its supporting entity suppresses
alarms.
Provisioned State:
IS or OOS
On Entry to State:
Suppress alarms for this VT.
Table G-32 shows the state transitions.
Table G-32. State P8: OOS-AUMA SGE
Event
Action or Condition
Next State
ENT
TL1 DENY:SNVS
---
DLT
TL1 DENY:SNVS
---
VT becomes unequipped
None
P4
Entity is provisioned IS and supporting
entity allows alarms
None
P6
Entity is provisioned OOS and Supporting Entity Restored
If Fault SA
P3a
Else If Fault NSA
P3b
Else
P2
61186003L1-35D
G-39
MX2820 System TL1 Reference Guide
This page is intentionally blank.
G-40
61186003L1-35D
Appendix H
List of Abbreviations
A
AC........................................................ Automatic Clearing
AID ...................................................... Access Identifier
AIDTYPE .............................................. Access Identifier Type
AIS ....................................................... Alarm Indication Signal
APS ...................................................... Automatic Protection Switch
B
BER ..................................................... Bit Error Rate
C
CLEI..................................................... Common Language Equipment Identifier
CLLI ..................................................... Common Language Location Identifier
CO ....................................................... Central Office
CONDTYPE .......................................... Condition Type
CTAG ................................................... Correlation Tag
D
DIRN .................................................... Direction
H
HO ....................................................... Hold Over
HRE ..................................................... HDSL Range Extender
HTU-C.................................................. HDSL Transceiver Unit - Central Office
HTU-R.................................................. HDSL Transceiver Unit - Remote
61186003L1-35D
H-1
MX2820 System TL1 Reference Guide
I
INC ...................................................... Incoming Failure Condition
INE....................................................... Intelligent Network Element
INHMODE ............................................ Inhibit Mode
ISD....................................................... Idle Signal
L
LOCN ................................................... Location
LOF...................................................... Loss of Frame
LOP ...................................................... Loss of Pointer
LOS...................................................... Loss of Signal
M
MONDAT .............................................. Monitor Date
MONLEV .............................................. Monitor Level
MONTM................................................ Monitor Time
MONTYPE ............................................ Monitor Type
MONVAL .............................................. Monitor Value
MTA ..................................................... Metallic Test Access
MUX..................................................... Multiplexer
N
NE........................................................ Network Element
NSA...................................................... Non-Service Affecting
NTFCNCDE .......................................... Notification Code
NUMINVL ............................................. Number Interval
NUMREPT ............................................ Number of Reports
O
OCRDAT............................................... Occurrence Date
OCRTM ................................................ Occurrence Time
OOF ..................................................... Out of Frame
OS........................................................ Operations System
OSS...................................................... Operations Support System
H-2
61186003L1-35D
P
PID....................................................... Private ID
PM ....................................................... Performance Monitoring
R
RAI....................................................... Remote Alarm Indicator
REPTDAT ............................................. Report Date
REPTINVL ............................................ Report Interval
REPTSTATM ......................................... Report Starting Time
REPTTM ............................................... Report Time
RFI ....................................................... Remote Failure Indication
rspblk .................................................. Response Block
RTU...................................................... Remote Test Unit
S
SA ........................................................ Service Affecting
SC........................................................ Switch Command
SCU ..................................................... System Controller Unit
SD........................................................ Signal Degrade
SF ........................................................ Signal Failure
SID....................................................... Source Identifier
SLM ..................................................... Signal Label Mismatch
SRVEFF ............................................... Service Effecting
STS ...................................................... Synchronous Transport Signal
T
T1-OR .................................................. T1 Office Repeater
TAP ...................................................... Test Access Path
TCP/IP ................................................. Transmission Control Protocol/Internet Protocol
TID....................................................... Target Identifier
TL1 ...................................................... Transaction Language 1
TMOFST ............................................... Time Offset
TMPER ................................................. Time Period
TSC ...................................................... Test System Controller
TYPEREP.............................................. Type Report
61186003L1-35D
H-3
MX2820 System TL1 Reference Guide
U
UAP...................................................... User Access Privilege
UID ...................................................... User ID
V
VLDTY.................................................. Validity
VT ........................................................ Virtual Tributary
H-4
61186003L1-35D
This page is intentionally blank.
61186003L1-35D
H-5
®
Carrier Networks Division
901 Explorer Blvd.
Huntsville, AL 35806
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising