ADTRAN | T1 | Quick Start Guide | Adtran T1 Quick Start Guide

Adtran T1 Quick Start Guide
For more detailed documentation, visit us online at www.adtran.com
T1 ESF CSU ACE
P/N 1203025L1
INSTALLATION INFORMATION
T1
CPE T1 Device
Network
•
An eight-position modular jack (labeled NETWORK) is provided to
connect to the network T1 circuit. The pinout is provided on this Quick
Start Guide. See Chapter 2, Installation,of the T1 ESF CSU ACE User
Manual for more information. An eight-position modular jack (labeled
CPE) is provided to connect to the customer equipment. The pinout is
provided on this Quick Start Guide. See Chapter 2, Installation,of the T1
ESF CSU ACE User Manual for more information.
•
An EIA-232 connector is provided on the bottom of the T1 ESF CSU
ACE to connect to a proxy agent, T-WATCH station, ASCII terminal, or a
modem. The pinout for the EIA-232 connector can be found in Appendix
A of the the T1 ESF CSU ACE User Manual.
•
The T1 ESF CSU ACE can be configured and controlled via the local
front panel, the EIA-232 control port, or T-WATCH.
•
The T1 ESF CSU ACE can be powered by either of the following
methods:
1. Use the included -48VDC power supply.
2. Use a power cable connected to an on-site -48VDC power supply.
•
Additional information can be found on the product CD which contains
the T1 ESF CSU ACE User Manual, FAQs, Data Sheets, Applications,
and White Papers.
T1
Top View
NETWORK CONNECTION PINOUT
CPE CONNECTION PINOUT
Pin
Name
Description
Pin
Name
Description
1
R1 RXDATA
Receive data from the Network - Ring
1
R TXDATA
2
T1 RXDATA
Receive data from the Network - Tip
Transmit data towards the Network Ring
3, 6, 7, 8
UNUSED
n/a
2
T TXDATA
Transmit data towards the Network - Tip
4
R TXDATA
Transmit data towards the Network Ring
3, 6, 7, 8
UNUSED
n/a
4
R1 RXDATA
Receive data from the Network - Ring
Transmit data towards the Network - Tip
5
T1 RXDATA
Receive data from the Network - Tip
5
T TXDATA
Quick Start Guide, 61203025L1-13A, September 2001
Technical Support 1-888-4ADTRAN (1-888-423-8726)
Copyright  2001 ADTRAN, All Rights Reserved
T1 ESF CSU ACE
P/N 1203025L1
MENU TREE
1) NI PERF REPORTS
1) STATUS
2) CURR ERR/ALM
3) ERR/ALM HISTORY
1) NETWORK (NI)
2) CONFIG
2) UNIT
MAIN MENU
3) PORT
1) TIME/DATE
2) SOFTWARE REV
3) UTIL
Displays the current software revision
3) REINIT UNIT
4) ADDRESS
5) FACTORY RESTORE
Restores all configurations to factory settings
1) NETWORK TESTS
4) TEST
2) RUN SELF TEST
3) PORT TESTS
Quick Start Guide, 61203025L1-13A, September 2001
Technical Support 1-888-4ADTRAN (1-888-423-8726)
Copyright  2001 ADTRAN, All Rights Reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising