Acnodes | PMW7028 | User manual | Acnodes PMW7028 Open Frame - 1080P / 4K User Manual

Acnodes PMW7028 Open Frame  - 1080P / 4K User Manual
Industrial Monitors
PMW70ˡ8
28” 4K LCD Display
Open frame metal construct ion
DP 1. 2 + HDMI 1. 4 + HDMI 2.0 video input
User Manual
All rights reserved. Product description and product specifications are subject to change without notice.
For lastest product information, please visit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA91710
Tel: 909.597.7588
© Copyright 2019 Acnodes Corp.
Fax: 909.597.1939
Legal Information
First English printing, July 2019
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, f re or electrical shock.
Only qualif ed service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualif ed service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modif ed or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, f re, water, lightning, or other acts of nature, unauthorized product modif cation, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power f uctuation or failure.
Use of supplies or parts not meeting our specif cations.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modif cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Contents
< Part. 1 > PMW7028
1.1
1.2
1.3
Package Content
Structure Diagram & Dimension
Mounting Hardware & Installation
P.1
P.2 - 3
P.4
< Part. 2 > Specifications / OSD/ Remote Controller
2.1
2.2
2.3
Product Specifications
On- Screen Display Operation (OSD)
Picture in Picture (PIP) / Picture by Picture (PBP)
P.5 - 6
P.7 - 9
P.10 -11
< Part. 3 > Options
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Option Table
Remote Controller (RC-2)
3G / HD / SD-SDI Broadcast-grade input
MCS Multi-display control solution
Touchscreen & driver
DC Power
MIL-type or lockable connector
P.12
P.13
P.14
P.15
P.16 - 17
P.18
P.19
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■
Use only cleansers made specif cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the f nish.
■
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive cleanser on a microf bercloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microf ber cloth f rst, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
< Part 1 > PMW7028
< 1.1 > Package Content
28” 4K LCD Display
PMW7028
28” 4K LCD Display X 1
6ft DP cable X 1
Power Cord X 1
Remote Controller x 1
Basic I/O
HDMI 1.4
HDMI 2.0
Audio
out
DP
P.1
Power
< 1.2 > Structure Diagram
Front view Side View
1
2
PMW7028
3
4
6
Bottom view
1
Rear case
2
LCD panel
3
Universal open frame mounting
4
Audio speaker, pair
5
LCD membrane
6
Extended remote sensor membrane cable
Rear view
5
( 66cm from AD board to sensor end )
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
PMW7028
700.9 x 65 x 421.5 mm
27.6 x 2.6 x 16.6 inch
785 x 175 x 527 mm
30.9 x 6.9 x 20.7 inch
12.7 kg
27.9 lb
16.3 kg
35.9 lb
P.2
< 1.2 > Dimension
28” 4K LCD Display
Front View
Side View
PMW7028
Rear View
UNIT : mm
1mm = 0.03937 inch
Bottom View
P.3
< 1.3 > Mounting Hardware & Installation
( I ) Universal mount
( II ) VESA mount ( 100*100mm )
VESA mount ( 100*100mm )
■
Hardware and M6*4 pcs for VESA mount are not provided
P.4
< Part 2 >
< 2.1 > Product Specifications n
28” 4K LCD Display
Mechanical Design
PMW 7028
Protection
open frame
Front Panel
-
Rear Casing
Black, RAL 9005
VESA mount
100 x 100 mm
ready
Universal mount
Desktop Stand
-
Panel Mount
-
LCD Panel
Panel Size ( diagonal )
28-inch Widescreen TFT color LCD
Native resolution
3840 x 2160
Brightness ( cd/m )
300
Contrast Ratio ( typ. )
1000 : 1
Colors
1.07 Billion, 10-bit
Viewing Angle ( L/R/U/D )
89/89/89/89
Response Time ( ms )
25
Dot pitch ( mm )
0.181
Display Area ( mm )
620.93H x 341.28V
Surface treatment
Anti-glare
Surface hardness
3H
Backlight Type
LED
MTBF ( hrs )
30,000
2
Video
Audio
Digital Display port
DP 1.2
HDMI
HDMI 2.0 / HDCP 2.2
/ HDCP 1.3
HDMI 1.4 / HDCP 1.4
Output
Connector Resistance
3.5mm stereo jack
Resistance / Power level
30kΩ / 2.8V
Speaker:
Dual Stereo
10W x 2
*When the audio output is connected, speaker output is OFF
Power
Input
Auto-sensing 100 to 240VAC, 50 / 60Hz
Consumption:
Screen ON
Max. 52W
Power saving mode
Max. 9W
Power button OFF
Max. 2W
Compliance
EMC
FCC & CE certif ed
Safety
CE / LVD certif ed
Environment
RoHS2 & REACH compliant
P.5
< 2.1 > Product Specifications
Environmental Conditions
Operating
Storage /
Non-operating
Temperature
0 to 55°C degree
Humidity
20~90%, non-condensing
Altitude
16,000 ft
Temperature
-20 to 60°C degree
Humidity
5~90%, non-condensing
Altitude
40,000 ft
Shock
10G acceleration ( 11ms duration )
Vibration
10~300Hz 0.5G RMS random vibration
Physical Specification
Product ( W x D x H )
mm
700.9 x 65 x 421.5
inch
27.6 x 2.6 x 16.6
Packing ( W x D x H )
mm
785 x 175 x 527
inch
30.9 x 6.9 x 20.7
Net Weight
12.7 kg / 27.9 lb
Gross Weight
16.3 kg / 35.9 lb
Chassis color
Dark
Chassis materials
Aluminum
Applicable Format
Display Port Input
PC Signal
3840 x 2160 x 60Hz
1920 x 1080 x 60Hz
1600 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 768 x 60Hz
1024 x 768 x 60 / 70 / 75Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
HDMI Input
Audio Signal
2ch Linear PCM
HDMI 2.0
3840 x 2160 x 60Hz
HDMI 2.0 / 1.4
3840 x 2160 x 30Hz
1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal
2ch Linear PCM
* In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display
incorrectly on a full screen. If so, please adjust the display card setting on display size to f x the issue.
P.6
< 2.2 > On-screen Display Operation ( OSD )
28” 4K LCD Display
Power light
Green = On
Orange = Power saving
Membrane Switch
Function
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button
for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
P.7
< 2.2 > On-screen Display Operation ( OSD )
1
Picture
Brightness : Adjust the screen brightness
Contrast
: Adjust the difference between the image background
( black level ) and the foreground ( white level )
Black level : Adjust background black level of the screen
Eco
2
: Screen in power saving mode
Position
Picture size : Adjust the image size
- Full Screen / 4:3 / 5:4 / Pixel to Pixel
DP version : Select the DP version
3
Color
Color temperature : User / Warm / Cool / 5400k mode and
Red / Green / Blue color balance
Sharpness
: Adjust the image from weak to sharp
Hue
: Adjust the screen hue value
Saturation
: Adjust the saturation of the image color
Dynamic
luminous control
: Control the dynamic brightness
4
OSD Set
Language
: Select the language in which the OSD menu is
displayed - English
OSD H-Position
: Align the screen image left or right
OSD V-Position
: Align the screen image up or down
OSD time out
: Adjust the screen timeout
OSD transparency : Adjust the screen transparency
OSD size
: Adjust the screen size - Normal / Small
OSD rotation
: Rotate the screen - 90° / 180° / 270°
P.8
< 2.2 > On-screen Display Operation ( OSD )
5
Reset
Reset
6
: Return the adjustment back to factory setting
PIP
PIP mode
: Enter into PIP / PBP setting - PIP MODE /
PBP 2WIN ( Main screen + 1 sub screen ) /
PBP 3WIN ( Main screen + 2 sub screen ) /
PBP 4WIN ( Main screen + 3 sub screen )
Select the signal input of each sub screen
PIP size
: Adjust the size of the Sub screen
- Small / Medium / Large / Huge
PIP position
: Adjust the position of the Sub screen
- Top Left / Top Right / Bottom Left / Bottom Right
Swap
: Swap the input signal of PIP / PBP sub screen
7
MISC
Signal source : Select the signal source - DP / HDMI1 / HDMI2
Mute
: Turn off the surrounding sound
Audio in
: Auto / Line in / DP
Volume
: Adjust the volume of sound
Sleep mode
: Set the off time - 10 min / 20 min / 30 min /
50 min / 60 min / 120 min / 240 min
Options on Reset page
Rotation
: Rotate the image in Full screen or 1:1
- 90° / 180° / 270°
Picture size : Adjust the image size in Full screen or 1:1
P.9
28” 4K LCD Display
< 2.3 > How to Use Picture In Picture ( PIP ) / Picture By Picture ( PBP )
< 2.3.1 > Picture in Picture ( PIP )
Mode
Display the Sub screen in the Main screen.
OSD Menu → MISC → PIP Mode → Large / Small / OFF
Main screen
Sub screen
Position
Adjust the position of the Sub screen ( top left, bottom left, top right, bottom right )
OSD Menu → MISC → PIP Position → top left / top right / bottom left / bottom right
top left
top right
bottom left
bottom right
Size
Adjust the size of the Sub screen ( Large / Small )
OSD Menu → MISC → PIP Mode → Large / Small
Size of Sub screen
LCD Monitor
Large Sub screen
Small Sub screen
1920 x 1200
552 x 414
480 x 360
1920 x 1080
552 x 414
480 x 360
1440 x 900
414 x 310
360 x 270
1366 x 768
392 x 294
340 x 254
1280 x 1024
368 x 276
320 x 240
P.10
28” 4K LCD Display
< 2.3.2 > Picture By Picture ( PBP )
Mode
Display the Sub screen next to the Main screen.
OSD Menu → MISC → PIP Mode → PBP
Sub screen
Main screen
Size
LCD Monitor
Main / Sub screen
1920 x 1200
955 x 716
1920 x 1080
955 x 716
1440 x 900
715 x 536
1366 x 768
678 x 508
1280 x 1024
635 x 476
< 4.3.3 > PIP / PBP Source
To select an input signal for PIP / PBP Sub screen.
OSD Menu → MISC → PIP Source → HDMI / SDI
The PIP / PBP is operable in the following table :
Sub
HDMI
SDI
HDMI
x
o
SDI
o
x
Main
P.11
< Part 3 > Options <
3.1 > Option Table
Options
PMW7028
Remote controller
SDI
MCS multi-screen control
Touchscreen
MIL-type / lockable connector
DC Power
P.12
28” 4K LCD Display
< 3.2 > Remote Controller ( RC-2 )
1
8
2
INPUT
3
4
MUTE
1
2
3
4
5
6
7
8
9
AUTO
0
-/--
9
CH
10
FREEZE
11
1
12
MENU
5
VOL
SELECT
ASPECT
13
14
6
SLEEP
ENTER
15
16
7
BACK
20
SOURCE
SWAP
EXIT
PIP
POSITION
PIP
AUDIO
17
1
18
PIP
21
19
Water proof
1
INPUT
2
Select the source
Switches on or off the TV
3
0-9
Only use in TV mode. Select channels. For channel numbers 10
and above, enter the second digit within two seconds.
4
AUTO
MENU
Auto adjust
5
6
▲ / ▼ / ◄ / ► / ENTER
7
BACK
MUTE
Vol + / CH + / FREEZE
- / -ASPECT
SELECT
SLEEP
EXIT
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PIP functions
PIP
PIP AUDIO
POSITION
SOURCE
SWAP
Display the menu on the screen or go to the previous menu
Go to the upper menu or select the previous value /
Go to the next menu or select the next value /
Decrease the setting value /
Increase the setting value or enter to the select item setting
Enter to the select item settings or excude the setting
Back to previous value
Turn on or off the speaker
Increase or decrease the speaker volume
For TV model only, increase or decrease the channel number
Reserve for OEM model
For setting input single or double digits
Adjust the screen size
To select the existing item
Select the sleeping time
Exit the menu or cancel
Picture in picture
To set the audio of in PIP mode
To set the screen position in PIP mode
PIP Source
Swap screen in PIP mode
P.13
< 3.3 > Options : 3G / HD / SD-SDI input
SDI input is an ideal solution for the broadcast-grade
video and high resolution CCTV market.
Designed for use with UltraView displays, a
SDI input module can support up to 1080p
@60Hz resolution without using additional space or
power and it comes standard with a 2-year warranty.
SDI
HDMI 1.4 HDMI 2.0
Audio
DP
Power
out
in - out
INPUT
Standard Compliance
Compatible Video Format
Compatible Audio Format
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI IN
BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT
BNC x 1 / Active through, equalized & relocked
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
3G-SDI
1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI
1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI
480i
@60Hz, 4:2:2
ITU-R BT.656
576i
@50Hz, 4:2:2
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
3G-SDI
150m at 2.97Gb/s
HD-SDI
250m at 1.485Gb/s
SD-SDI
480m at 270Mb/s
P.14
28” 4K LCD Display
< 3.4 > Options : MCS
MCS
( Multi-display Control )
More control is always good. Especially when it
is necessary and easy. Acnodes provides MCS
solution to control the OSD of various UltraView LCD
display up to 64 units.
The RS-232C is used for the communication between
the PC and the f rst display via a 15 feet serial cable
while the CAN bus is used for the various LCD displays
cascade together via CAT 5/6 cable, and daisy chain up
to 1,000 meters.
Designed for use with UltraView LCD displays,
Acnodes provides a MCS input module without
using additional space or power and it comes
standard with a 2-year warranty.
MCS
HDMI 1.4 HDMI 2.0
Link
in
out
Audio
DP
Power
out
set
Set switch
For the 1st and last display,
push the set switch upward
RS-232C
For other daisy chain displays,
push the set switch downward
15 feet serial cable
( over 15 feet, extender required )
A
LINK
B
OUT
IN
D
C
OUT
IN
Cat5 / 6 cable
max. 300 meters
Cat5 / 6 cable
max. 300 meters
OUT
IN
OUT
Cat5 / 6 cable
max. 300 meters
RJ-45 jack
Daisy chain up to 1,000
meters and 64 displays
P.15
up to 64 displays
< 3.5 > Options : Touchscreen & Driver
28" USB Touchscreen Specification
Model
TPC-10
Multi-touch
Technology
Projected Capacitive
Touch Point
10
Input Type
Finger or Capacitive Stylus
Resolution
4096 x 4096
Touch Point Accuracy
± 2 mm
Response Speed
< 5 ms
Activation Force
<5g
Surface Hardness
6H
Light Transmission
> 85
Haze
3% ↓
Durability
50 million touches
Top Layer
3 mm Glass
Bottom Layer
1.1 mm Sensor Glass
Thickness
4.3 ± 0.1 mm
Connector
USB
Compatibility
■
■
■
■
Linux / Android / Windows / Mac
Dimension will be changed if Multi-touch required
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
For detailed information, please refer to the attached CD disc
As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
HDMI 1.4 HDMI 2.0
P.16
DP
Audio
in
out
Power
< 3.5 > Options : Touchscreen & Driver
28” 4K LCD Display
TPC-10 Driver
Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports
easy Plug-and-Play operations. There is no need to install additional drivers on the computer.
P.17
< 3.6 > Options : DC Power
24V
48V
125V
24-Volt
48-Volt
110-Volt
18 ~ 36V
36 ~ 75V
66 ~ 160V
- No loa
50 mA
50 mA
40 mA
- Full loa
4880 mA
2442 mA
993 mA
Output voltage:
24-Volt
24-Volt
24-Volt
Output current:
4.16A
4.16A
4.16A
EffIciency
88%
90%
92%
Model
Input rating
Input voltage:
Input range:
Input current
Output rating
***
For DC power option :
( 1 ) If the unit w
with LCD, earthing may be required
P.18
< 3.7 > Options : MIL-type or Lockable Connector
Input
MIL - type
Connector
DC Power ***
( Male )
VGA ***
( Male )
Part no.
28” 4K LCD Display
MIL Standard
MS3470W8-33P
MIL - DTL - 26482
MS3470W14-15P
MIL - DTL - 26482
*** There are several additional MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most
design flexibility possible. For more information, please contact us.
Part no.
Input
Lockable
Connector
DC Power
( Male )
YM-Ext-461CP001
USB
LUSB - A111 - 00
Standard
D-type 3W3
-
*** MIL - type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.
The company reserves the right to modify product specif cations without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
P.19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising