Acnodes | KD8121 | User manual | Acnodes KD8121 20 to 27-inch Rack LCD Console User Manual

Acnodes KD8121 20 to 27-inch Rack LCD Console User Manual
All rights reserved. Product description and product specifications are subject to change without notice.
For lastest product information, please v is it Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA 91710
Tel: 909. 597. 7588
© C opyright 2016 Acnodes C orp.
Fax: 909. 597. 1939
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Contents
< Part. 1 > KD8121
1.1
1.2
1.3
1.4
Package Content
Structure Diagram & Dimension
Installation
Connection
P.1
P.1 - 2
P.3 - 4
P.5
< Part. 2 > Specifications / OSD
2.1
2.2
2.3
Product Specifications
Keyboard / Mouse Specifications
On-screen Display Operation ( OSD )
P.6 - 7
P.8 - 10
P.11 - 12
< Part. 3 > Options
3.1
3.2
3.3
3G / HD / SD-SDI Broadcast-grade input
HDMI
DC Power : 12V / 24V / 48V / 110 ~ 125V
< Part. 4 > KVM Integration
P.13
P.14
P.14
P.15
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
< Part 1 >
< 1.1 > Package Content
KD8121 unit X 1
- 6ft DVI-D console cable X 1
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models.
It varies with options such as KVM, SDI, HDMI & DC power.
< 1.2 > Structure Diagram
1
2
7
3
4
8
5
9
6
10
1
LCD interchangeable module kit
6
Mouse interchangeable module kit
2
LCD membrane
7
Carry handle to release the 2-pt lock
3
Micro switch for screen auto power off
8
Membrane switch (KVM option)
4
Installation Slides
9
Audio speaker ( for SDI or HDMI option )
5
Keyboard interchangeable module kit
10
Front USB port for device access ( USB Hub KVM only )
P.1
< 1.2 > Dimension
Front View
Rear View
DVI-D
Power
KB / MS
UNIT : mm
1mm = 0.03937 inch
Side View
Top View
Model
KD8121
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
441.6 x 670 x 44 mm
17.4 x 26.4 x 1.73"
595 x 860 x 140 mm
23.4 x 33.9 x 5.5”
14.7 kg
32.3 lb
18.9 kg
41.6 lb
The weight is only for the single console models. It varies with accessories & options
such as KVM, SDI, HDMI & DC power.
P.2
< 1.3 > Installation - How to install Installation Slides
Step
■
Insert the left and right rear mounting brackets into
the LCD console drawer.
Step
■
■
1
2
Measure the depth of the front and rear mounting rails.
Align each rear mounting bracket to a suitable length.
Step
3
Complete the installation
■
Fix the LCD console drawer into the rack.
M6 screw, cage nut & cup washer x 8 are provided.
P.3
< 1.3 > Installation- How to use the drawer
■
Hold the handle and slide out the drawer.
■
Flip up the LCD to a suitable angle.
■
Operate the LCD console drawer.
Option - Right Side Open
LCD
Panel
Flip up LCD from the side
Left
Right
i
Front Side
P.4
< 1.4 > Connection to
via DVI-D console cable
USB Server
LCD Console Drawer
DVI-D KB / MS
Power
DVI-D
console cable
USB
DVI-D
USB server
via DVI-D console cable
< 1.4 > Connection to external KVM
LCD Console Drawer
Power
DVI-D KB / MS
DVI-D
console cable
DVI-D
USB
DVI console KVM
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
P.5
< Part 2 >
< 2.1 > Product Specifications
LCD
Panel
Manufacturer
Panel Size ( diagonal )
21.5-inch Widescreen TFT color LCD
Display pixel ( dots x lines )
1920 x 1080
Brightness ( typ. )
250
Contrast Ratio ( typ. )
1000:1
Color
16.7 M
Viewing Angle ( L/R/U/D )
85/85/80/80
Response Time ( ms )
5
Dot pitch ( mm )
0.248
Display Area ( mm )
476.64H x 268.11V
Surface treatment
Haze 25%, Hard-coating
Surface hardness
3H
Backlight Type
LED
MTBF ( hrs )
Video
Connectivity
Power
Digital
30,000
HDMI
HDMI 1.3, CEA-861-D
DVI
DVI-D, TMDS single link
Plug & Play
DVI
VESA EDID structure 1.3
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
for Single Console
Screen ON
Max. 32W
Power saving mode
Max. 4W
Power button OFF
Max. 1W
Screen ON
Max. 62W
Power saving mode
Max. 34W
Power Consumption
with KVM integration
*For details, please refer to our KVM rear kit user manuals
Regulatory
Environmental
Conditions
Safety
FCC & CE certified
Environmental
RoHS2 & REACH compliant
Operating
Temperature
0 to 55°C degree
Humidity
20~90%, non-condensing
Altitude
16,000 ft
Temperature
-20 to 60°C degree
Humidity
5~90%, non-condensing
Altitude
40,000 ft
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Storage /
Non-operating
P.6
Physical
Specification
Product ( W x D x H )
441.6 x 670 x 44 mm
17.4 x 26.4 x 1.73 inch
Packing ( W x D x H )
595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch
Applicable
Format
Net Weight
14.7 kgs / 32.3 lbs
Gross Weight
18.9 kgs / 41.6 lbs
DVI-D Input
PC Signal
1920 x 1080 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input
PC Signal
Same as VGA
Video Signal
1080p : 60Hz
720p
: 50 / 60Hz
480p
: 60Hz
576p
: 50Hz
Audio Signal
2ch Linear PCM ( 32 / 44.1 / 48 KHz )
Speaker
Dual Stereo Speaker, 2 x 2W
P.7
< 2.2 > Standard Keyboard / Mouse Specifications
Ge
Gb
G keyboard integrated with touchpad
G keyboard integrated with trackball
Key force
55 ± 5g
Travelling distance
3 ± 0.3mm
Switch life
> 10 million life cycle time
OS support
Windows / Linux / Unix / Mac OS
Supporting layouts
America
United States
United Kingdom
Germany
France
Spain
Norway
Italy
Russia
Switzerland
Netherlands
Portugal
China
Japan
Korea
Arabia
Turkey
EMEA
Asia
P.8
< 2.2 > MAC Keyboard / Mouse Options
Me
Mb
MAC keyboard integrated with touchpad
F7
F8
MAC keyboard integrated with trackball
F7
F8
Supporting layouts
America
United States
How to Use "MAC" Keyboard
Keyboard Features
F1
F9
Decrease display brightness
Fast-forward
F2
F10
Increase display brightness
Mute sound
F3
Mission control
* Only works with OS X Lion
default Keyboard Shortcuts.
F11
Decrease volume
F4
F12
Dashboard
Increase volume
F7
Rewind
Eject disc
F8
Play / Pause
Command
P.9
< 2.2 > SUN Keyboard / Mouse Options
Se
Sb
S keyboard integrated with touchpad
Num
Ca ps
Scro ll
S keyboard integrated with trackball
Comp ose
Num
S keyboard integrated with touchpad / trackball
■
■
■
■
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 key notepad keyboard with full numerical pad and SUN function
USB interface
US layout only
How to Use "S" Keyboard
Num LED in Off mode
Num LED in Green mode
Key pad behaves as a SUN Solar
system administration command mode
Key pad behaves as a normal key
pad mode
Audio / Display Keys
* Please ask your supplier for full details
F9
F11
Audio : Mute
Display : Degauss
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast
P.10
Ca ps
Scro ll
Comp ose
< 2.3 > On-screen Display Operation ( OSD )
Membrane Switch
Function
Turn the monitor on or off
Display the OSD menu
Act as an Enter key to select screen setting options
Scroll through menu options and adjust
the displayed control
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Remark : All LED touch buttons in WHITE light.
The LED of Power
touch button will flash continuously when there is no signal input.
1
All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power
2
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power
P.11
).
).
< 2.3 > On-screen Display Operation ( OSD )
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
P.12
< Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
Acnodes’ SDI input is an ideal solution for the broadcast-grade
video and high resolution CCTV market.
Designed for use with Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, Acnodes provides a SDI
input module without using additional space or power and it
comes standard with a 2-year warranty.
SDI
in
Power
-
out
DVI-D
KB / MS
*** For SDI option, casing depth will be changed from 670mm ( 26.4" ) to 720mm ( 28.3" )
INPUT
Standard Compliance
Compatible Video Format
Compatible Audio Format
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI IN
BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT
BNC x 1 / Active through, equalized & relocked
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
3G-SDI
1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI
1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI
480i
@60Hz, 4:2:2
ITU-R BT.656
576i
@50Hz, 4:2:2
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
3G-SDI
150m at 2.97Gb/s
HD-SDI
250m at 1.485Gb/s
SD-SDI
480m at 270Mb/s
P.13
< 3.2 > Options :
- HDMI ( HDMI 1.3, CEA-861-D )
( 1 ) For HDMI option, DVI-D input will be removed.
( 2 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio
signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card
setting on display size to fix the issue.
HDMI
Power
KB / MS
< 3.3 > Options : DC Power
Model
12V
24V
48V
110 ~ 125V
Input voltage:
12-Volt
24-Volt
48-Volt
110-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
66 ~ 160V
- No load
50 mA
50 mA
50 mA
40 mA
- Full load
4950 mA
2450 mA
1220 mA
993 mA
Output voltage:
12-Volt
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
8.4A
Efficiency
84%
85%
85%
92%
Input rating
Input current
Output rating
DC power
DVI-D
KB / MS
***
For DC power option :
( 1 ) DC option excludes AC power adapter and power cord.
( 2 ) Casing depth will be extended from 670mm ( 26.4" ) to 720mm ( 28.3" )
P.14
< Part. 4 > KVM Integration
www.acnodes.com/files/downloads/CMKVM-UM.pdf
Matrix
Cat6 KVM
Local
Remote
8-port
16-port
32-port
1
1
1
-
-MKCP1613
-MKCP3213
1
1
2
-
-MKCP1624
-MKCP3224
1
1
0
-
-MKCS1602
-MKCS3202
1
2
0
-
-MKCS1603
-MKCS3203
1
3
0
-
-MKCS1604
-MKCS3204
www.acnodes.com/files/downloads/CKVM-UM.pdf
Combo
Cat6 KVM
Local
Remote
8-port
16-port
32-port
1
0
1
-KCP802
-KCP1602
-KCP3202
1
1
0
-KC802
-KC1602
-KC3202
1
0
0
-KC801
-KC1601
-KC3201
8-port
16-port
32-port
www.acnodes.com/files/downloads/MKVM-UM.pdf
Matrix
DB-15 KVM
Local
Remote
1
1
1
-MKP802
-MKP1602
-
1
1
2
-MKP804
-MKP1604
-
1
1
0
-MKS802
-MKS1602
-
1
2
0
-MKS803
-MKS1603
-
1
3
0
-MKS804
-MKS1604
-
www.acnodes.com/files/downloads/SKVM-UM.pdf
Combo
DB-15 KVM
Local
Remote
8-port
16-port
32-port
1
0
1
-KP802
-KP1602
-
1
1
0
-KV802
-KV1602
-
1
0
0
-KVS801
-KVS1601
-
www.acnodes.com/files/downloads/DVIKVM-UM.pdf
DVI-D
KVM
Local
Remote
1
0
0
12-port
-
-
-KVD1201
-
-
8-port
16-port
32-port
www.acnodes.com/files/downloads/USBKVM-UM.pdf
USB Hub
DB-15 KVM
Local
Remote
1
0
1
-KPH802
-KPH1602
-
1
1
0
-KVS802
-KVS1602
-
1
0
0
-KVH801
-KVH1601
-
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net Weight
Gross Weight
KD8121 with KVM
441.6 x 770 x 44 mm
17.4 x 30.3 x 1.73"
595 x 860 x 140 mm
23.4 x 33.9 x 5.5”
15.5 kg
34.1 lb
21.4 kg
47.1 lb
P.15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising