Boss Audio Systems | 632UAB | Owner Manual | Boss Audio Systems 632UAB Owner manual

Boss Audio Systems 632UAB Owner manual
CONTENTS
Precautions................................................................................................................................................. 1
Lithium Battery Cell Warnings .............................................................................................................................. 1
Use Cautions ..........................................................................................................................................1
Installation .................................................................................................................................................. 2
Installation Procedures .......................................................................................................................... 2
Installation Opening................................................................................................................................ 2
Wiring Connections ................................................................................................................................ 3
Uninstall the Main Unit ........................................................................................................................... 3
Control Panel Button Locations .................................................................................................................. 4
Operation ................................................................................................................................................... 4
Power / SRC ........................................................................................................................................... 4
Change the Source (SRC) .................................................................................................................... 4
Store/Recall Preset Stations (1 - 6)........................................................................................................ 4
.............................................................................. 5
Play/Pause, Intro, Repeat, Random, Tracks playback
Track/Folder Navigation ......................................................................................................................... 5
Set the Clock (CLK) .............................................................................................................................. 5
Adjust Volume (VOL) ............................................................................................................................. 5
Switch Between US and EU Frequency ................................................................................................. 5
Manual Tuning (|<< / >>|) ..................................................................................................................... 5
Auto Seek Tuning (|<< / >>|) .................................................................................................................. 5
Next/Previous Track ............................................................................................................................... 5
Fast Forward/Backward ........................................................................................................................ 5
Change Bands (BAND) .......................................................................................................................... 6
Automatic Music Search (AMS) .............................................................................................................6
Track Search .......................................................................................................................................... 6
Mute ...................................................................................................................................................... 6
Insert USB ............................................................................................................................................. 6
AUX In Jack .......................................................................................................................................... 6
Release Panel ....................................................................................................................................... 6
Reset System (RESET) ......................................................................................................................... 7
Bluetooth Operation.................................................................................................................................... 7
Pair and Connect ................................................................................................................................... 7
Make a Call ............................................................................................................................................ 7
Redial Last Dialed Number ................................................................................................................... 7
Answer a Call ......................................................................................................................................... 7
End a Call .............................................................................................................................................. 7
Switch Audio Between Car and Phone .................................................................................................. 7
Adjust Talk Volume ................................................................................................................................. 7
Bluetooth Music (A2DP)......................................................................................................................... 7
Remote Control .........................................................................................................................................8
Remove Insulating Sheet ....................................................................................................................... 8
Replace Lithium Battery Cell.................................................................................................................. 8
Remote Control Operation ..................................................................................................................... 8
Button Names and Locations ................................................................................................................. 9
Troubleshooting .........................................................................................................................................10
............................................................................................................................................11
ii
PRECAUTIONS
Lithium Battery Cell Warnings
•
•
•
Cell leakage may cause damage to the remote control.
Do not throw cells into
as this may cause an explosion.
Keep battery cells out of reach of children.
Use cautions
•
•
•
Some MP3/WMA files may not be playable.
•
•
•
•
•
Be sure to lower the volume before switching off the unit or the ignition key.
1
INSTALLATION
Installation Procedures
First complete the electrical connections and then check for correctness.
Installation Opening
This unit can be installed in any dashboard Having an opening as shown below.
2.05 inch
7.20 inch
Insert mounting collar into the dashboard and bend the mounting tabs out with a screwdriver.
Make sure that lock lever
is flush with the mounting collar( not projecting outward).
MOUNTING SLEEVE
2
INSTALLATION(CONT.)
!
- Only use speakers with 4 ohms impedance.
- Do not attach the control panel to the chassis before wiring is complete.
- The maximum current of the auto antenna is 200mA.
Wiring Connections
WIRING
DIAGRAM
15A
15
Radio Antenna
White:Front Left PRE-AMP Output
Red: Front Right PRE-AMP Output
Red: Rear Right PRE-AMP Output
White: Rear Left PRE-AMP Output
CAUTION
+12V DC
NEGATIVE
GROUND
Rear Right Speaker
Purple +
Purple/Black Gray +
Front Right Speaker
Gray/Black -
Green +
Rear Left Speaker
Green/Black White +
White/Black -
Front Left Speaker
ACC + (Red)
GND - (Black)
ANT + (Blue)
Power B + (Yellow)
Uninstall the Main Unit
1.
2.
Remove the plastic trim out from the main unit.
Insert a bracket key into the left and right side of the main unit and draw the unit out of
the mounting sleeve.
3
CONTROL PANEL BUTTON LOCATIONS
OPERATION
1.POWER/SRC
to turn off the unit.
RADIO, USB, BT,
AUX IN,modes (if there are USB inside the unit).
radio , BT and Aux. When the user inserts a USB flash drive,
their respective logos will illuminate on the display.
4
OPERATION
During USB mode, press the ‘1/>||’ button to pause or resume music playback.
Press the ‘2/INT’ button to play the first 10 seconds of each track, press again to stop the introduction
scan, and play the current track.
Press the ‘3/RPT’ button to toggle between RPT ALL (Play all track), RPT FLR (Continuously repeats all
tracks in current folder) and RPT ONE (Continuously repeats current track).
Press the ‘4/RDM’ button to play all tracks in random order, press again to cancel random playback.
8. CLK
Press the CLK button once to display the real time, With time appearing on the display.Press and hold
CLK button for more than 2 seconds until the hour flashes. You can adjust the HOUR by pressing the
button and
button. Then press the CLK button briefly, the minute will flash, you can adjust the
MINUTE by pressing the
button and
button.
Finally press the CLK button to confirm the time adjustments.
Rotate the volume knob to increase or decrese the volume level of the sound output.
Press the SEL button on the front panel or on the remote control repeatedly to cycle through the
following adjustable audio functions: ILL MID/HI/LOW, BASS, TREBLE, BALANCE, FADER, EQ OFF,
CLASS/ROCK/POP/ FLAT, LOUD ON/OFF, DX/LOC, STEREO/MONO, CLOCK 12/24, AREA US/EU.
• Rotate the VOL knob on the front panel or press the VOL+
/VOLbutton on the remote control
to adjust the selected item.
- ILL MID/HI/LOW: This receiver is equipped with 3 brightness settings.
Rotate the volume knob to preset the illumination to middle, high or low.
- BASS: -7, -6, ~, -1, 0, +1, ~, +6, +7
- TREBLE: -7,-6, ~, -1,0,+1,~, +6, +7
- BALANCE: L7, L6,~, L1, 0, R1,~,R6, R7
- FADER: R7,R6, ~, R1,0, F1,~,F6, F7
- EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
- Loudness: LOUD ON/OFF
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies.
- CLOCK 12/24: Select between 12 hours and 24 hours display.
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
5
OPERATION
10.FF(
) &11.FB(
)
In the radio mode:
Long press the
or
button for more than 2 seconds, the unit will switch to manual tuning
mode, briefly press the
or
button to search the next or previous frequency step by step.
Short press the
or
button, the automatic search will start, it will search upward or downward
for the strong signal radio station within the cuttent band. The auto searching will stop until find a
station.
In the USB mode:
Briefly press the
Press and hold the
or
or
button to play the the next or previou track.
button to fast forward or fast backward.
12.BND/AMS
In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band : FM 1,
FM 2,FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1、F2、F3 for FM band,
and A1, A2 for AM band will be shown on the LCD display.
Press the BND/AMS
check
When the 6 strongest stations will be stored into
AMS button on the remote
control to scan each preset station in each band.
During USB playback, press and hold the BND/AMS button to enter track search mode, the
“TRK0000” will appear on the display. Rotate VOL knob to select the “first number”. Then press the
button to move the “first number” to the left and enter the next number. Finally press the SEL button to
confirm and play the selected track. If no any operation in 5 seconds,it will play the current track.
13. MUTE
flash on the LCD
14. USB PORT
15. AUX IN JACK
16.
If you want to reset the unit, press the
the head unit.
button to detach the front panel, then you can remove it from
17. RESET
To reset all parameters to factory default values. Press the button to detach the control panel form
the head unit and remove the control panel,then use a subject with a sharp point end to thrush the RESET
hole.
6
BLUETOOTH OPERATION
Pair and Connect
Prior to using the Bluetooth device as a handsfree system for a Bluetooth-enabled mobile
phone for the
time, you must pair and connect the two devices as follows:
in the LCD indicating
1. In any mode, prior to pairing and connecting, the BT logo
that no device is connected. To begin pairing, enable BT mode on your mobile phone.
2. When the phone
the car audio system, the BOSS 632UAB name will be displayed.
3. Choose the BOSS 632UAB from the device list to pair and connect with the car audio
system. Upon
the BT logo will stop
4. When pairing is complete, the mobile phone audio will automatically transfer to the car
audio system whenever a call is made or received, or when the mobile phone plays
music.
Make a Call
• To make a call, dial the call directly from the paired mobile phone.
• To make a call with this Bluetooth handsfree system.
a) When linking up the Bluetooth mobile phone to this car audio handsfree system, press
the
button to access the dial telephone number mode, then press the “0~9”, * and #
button on the remote control to input the telephone number, the entered number will be
shown on the LCD.
b) If a number has been incorrectly input, press the DEL button or
button to delete it.
c) Press the
button to make outgoing call.
Redial Last Dialed Number
Press and hold the
button on the control panel to redial the last dialed phone number.
Answer a Call
• When the mobile phone is called, the incoming telephone number displays in the LCD.
• To receive the call, press the
button on the control panel or remote control.
Reject or End a Call
To reject the call or end an active call, press the
button.
Switch Audio Between Car and Phone
During a call, press the VOL knob/button to switch the audio source from the car audio
system back to your mobile phone.
Adjust Talk Volume
• During a call, use VOL knob or VOL + and VOL - buttons to adjust the volume level.
• Use the MUTE button to mute sound.
Audio Streaming (A2DP)
1. Press the /SRC button to enter BT mode and display pause in the LCD.
2. When a mobile device is paired, music played through that device will automatically be
heard through the car audio system.
on the mobile phone.
3. Press the >>| or |<< button to play the next or previous
4. Press the >|| button to pause or resume music playback.
7
REMOTE CONTROL
Button Names and Locations
1.
(Power on/off) button
2. VOL+/VOL-(volume increase/decrease) button
(answer call) button
3. Band button,
4. PREV: tune down, seek down; Track down, fast reverse
5. SEL(selection) button
6. NEXT: tune up, seek up; Track up, fast forward
7. Mute button, DEL(Delete) button
(end call) button
8. CLK(clock setting) button,
button, preset station 1 button, keypad 1
9.
10. I N T ( i n t r o ) button, preset station 2 b u t t o n , k e y p a d 2
11. R P T ( r e p e a t ) button, preset station 3 b u t t o n , k e y p a d 3
12. RDM (random) , preset station 4 button, keypad 4
13. -10(previous 10 tracks) , preset station 5 button, keypad 5
14. +10(next 10 tracks) , preset station 6 button, keypad 6
15. ST (stereo) button, keypad 7
16. LOUD(loudness) button, keypad 8
17. AMS (automatic music search) button, keypad 9
18. SRC(Source) button, keypad
19. EQ(Equalizer) button, keypad 0
20 . LOC (local)/DX button, keypad #
1
5
2
4
6
7
8
9
11
10
12
14
13
16
15
17
18
20
19
Note: When using the remote control for the first time, you
must pull out the portective plastic tab from the battery compartment
found on the back of the remote control.
9
3
REMOTE CONTROL
Remove Insulating Sheet
The remote control comes with an insulating sheet
attached to the underside of the remote control, as
illustrated on the right. The remote control will not
work until the insulating sheet is removed.
Replace Lithium Battery Cell
1.
2.
3.
4.
When the lithium cell battery becomes weak,
replace it as illustrated on the right.
Press and hold the movable block in the
direction indicated by arrow 1. At the same
time, pull the cell holder out of the remote
control in the direction indicated by arrow 2.
Replace the old cell with a new one, making
sure the (+) polarity is facing upward.
Re-insert the cell holder into the remote
control.
!
- Cell leakage may cause damage to the remote control.
- Do not throw cells into
as this may cause an explosion.
- Keep battery cells out of reach of children.
Remote Control Operation
Position the emitting window of the remote control
toward the sensor window of the unit.
•
The operation angle for front panel remote control
reception is about 30 degrees.
•
The distance between the emitting window of the remote control and the sensor window
of the unit should remain less than 5 meters.
8
TROUBLESHOOTING
If you suspect something is wrong, immediately switch power off. Do not use the unit in
abnormal condition, for example without sound, or with smoke or foul smell, can cause fire or
electric shock.
Immediately stop using it and call the store where you purchased it. Never try to repair the
unit by yourself because it is dangerous to do so.
General
1) Car's engine switch is not on.
Turn you car's key to ACC or ON.
2) Cable is not correctly connected.
Check the connection.
3) Fuse is burnt.
Replace fuse.
4) Volume is in mute or minimum.
Check volume or mute on/off, adjust volume to a desired level.
5) Sound skips.
The installation angle is more than 30°. Adjust the installation angle less than 30°.
6) The operation keys do not work.
The built-in micro- computer is not operating properly due to noise. Press the RESET button
to restore the program to zero.
Radio
1) Much noise in broadcasts.
Station or signal is too weak. Select other stations of stronger signal level.
2) The antenna cable is not connected.
Insert the antenna cable firmly into the antenna socket of this car radio.
3) Preset station is reset.
Battery cable is not correctly connected. Connect the battery cable to the terminal that is
always live.
USB
USB is connecting but no sound
a) USB connection is not good. Take it out and insert again.
b) USB is damaged or no music file inside. Change to another USB, or record music inside it.
10
SPECIFICATIONS
General
Power supply Requirement :
Maximum power output :
Speaker impedance :
Unit Dimensions(WxHxD) :
Weight :
Fuse :
DC 12V
50W X 4CH
4 - 8 Ohm
7.0 X 2.0 X 3.8 inch
1.54 Lb (0.7 kg)
15 A
RADIO
FM
Frequency Range USA / EUROPE:
Channel step:
87.5 MHz - 107.9 MHz / 87.5 MHz - 108.0MHz
200 KHz / 50 KHz
AM
Frequency Range USA / EUROPE:
Channel step:
530 KHz - 1710 KHz / 522-1620 KHz
10 KHz / 9 KHz
USB
Usable Audio Formats :
USB Port Type:
USB Charging:
Pre-amp Output :
Frequency Response :
S/N Ratio :
MP3/WMA
2.0
5V/1A
Front and Rear
20 Hz - 20 KHz
60dB
BT
BT Profile supports :
Range of frequency :
11
Headset, Handsfree and A2DP & AVRCP
2.4GHz spectrum
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising