Boss Audio Systems | ATV28B | Owner Manual | Boss Audio Systems ATV28B Owner manual

Boss Audio Systems ATV28B Owner manual
INFORMATION TO THE USER
Thank you for purchasing this
ATV28B All-Terrain Sound System
Please read through these instructions carefully so you will know
how to operate your model properly.
After you have finished reading the instructions, keep this document
in a safe place for future reference.
5
4
6
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
7
8
9
5
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by
user. This equipment complies with FCC/ IC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is desirable that it should
be installed and operated keeping the radiator at least 20 cm or more away from
person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration
or modifications
carried out without appropriate authorization may invalidate the
NINGBO ULTIMATE
中国宁波好德美电声有限公司
user’s right to operate the equipment.
3
4
INSTALLATION PRECAUTIONS
5
2
DIMENSIONS ARE IN: mm
TOLERANCES: ±
FRACTIONAL: ±
ANGULAR: ±
TWO PLACE DECIMAL: ±
THREE PLACE DECIMAL: ±
NAME
DRAWN
CHECKED
FINISH:
MODEL NO:
WARNING - Always consult a professional installer
1:1
7
6
4 - Hi-strength Nylon Mounting Straps
USER MANUAL
QUICK START GUIDE
1 - Warranty Card
INFORMATION TO THE USER
EN
9
Tips:
EN
Tips:
EN
CAUTION!!
CAUTION!! Using other mounting methods may void this warranty
ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
BLUETOOTH OPERATION
STREAMING MUSIC
1
2
3
4
5
6
7
MFC - MULTIFUNCTION CONTROLLER
BLUETOOTH INDICATOR LED - BLUE COLOR
POWER INDICATOR LED - RED COLOR
3.5mm AUX-INPUT
PREVIOUS TRACK / Press and hold for VOL PLAY/PAUSE / Press and hold for POWER ON
NEXT TRACK / Press and hold for VOL +
5V 1A
USB CHARGE
AUX-INPUT
GE
AR
B CH
5V
Bluetooth SIG, Inc. and any use of such marks is under license.
Other trademarks and trade names are those of their respective owners.
US
iser
Cru
The Bluetooth® word mark and logos are registered trademarks owned by
BLUETOOTH OPERATION
■ Do not attempt to install or service this product by yourself. Installation or servicing of this
product by persons without professional training and experience in electronic equipment
and motorized vehicle accessories may be dangerous and could expose you to the risk of
electric shock, injury or other hazards
■ Refer any repairs to a qualified BOSS AUDIO SYSTEMS Service Center
■ The ATV28B can be powered from a vehicles cigarette lighter / auxiliary power port, or
hard wired directly to the battery through an optional relay / accessory switch
■ When wiring directly to the vehicles battery, be sure to disconnect the batteries negative
terminal wire before starting any wiring procedures, it is suggested that an
optional fuse and fuse holder (not included) with minimum rating of 20 Amps be in line with
the positive battery terminal
■ The ground cable length should not exceed 18-inches (See wiring diagram)
■ The ATV28B has a weather resistant design, it should not be submerged in or
under water under any circumstances
■ Use only the installation parts provided with the ATV28B
10
Nyn
e
Tips:
8
AR
1 - User Manual Quick Start Guide / Poster
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
□ Relocate or reorient the receiving antenna.
□ Increase the separation between the equipment and receiver.
□ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.
B CH
5
4
WEIGHT:
US
3
REV.
Nyn
2
PART NO:
A4
PAGE NO:
iser
1
1 - Quick Connect Power Extension Adaptor
SIZE
ATV30RGB
Cru
SCALE:
7
6
PART NAME:
1
ENG APPR.
1
MATERIAL:
DATE
GE
1 - Handlebar Mounting Kit
GE
AR
B CH
US
1A
5V
1A
1A
3
2
2
5V
2
1 - Bluetooth Multi-Function Controller
BLUETOOTH® ENABLED
ALL-TERRAIN SOUND SYSTEM
1
3
3
4
4
723.8
5
201.4
293.2
6
6
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of this device.
THIS PACKAGE CONTAINS
1 - ATV28B All-Terrain Speaker System
■ Do not operate mobile equipment while driving a motorized vehicle – safe driving and
safety consideration of others should always be your highest priority.
■ In the event you should notice smoke, strange noises or odor from this product, or any
other abnormal signs, immediately turn off the power and consult your dealer or the nearest
authorized BOSS AUDIO Service Center. Using this product in this condition may result in
permanent damage to the system.
■ Set your volume control at a low setting, then slowly increase the sound until you can
hear it comfortably without distortion, or ear discomfort.
■ BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
- Do not turn up the volume so high that you can’t hear what’s around you.
- Use caution or temporarily discontinue use in potentially hazardous situations.
Nyn
e
ATV28B
GETTING TO KNOW YOUR
ATV28B MULTIFUNCTION CONTROLLER (MFC)
10
7
3
IMPORTANT SAFETY PRECAUTIONS
iser
QUICK START GUIDE
2
7
1
GETTING STARTED
eC
ru
USER MANUAL
FCC COMPLIANCE STATEMENT
BEFORE YOU START
ATV28B can play audio from any device that
has a 3.5mm headphone audio jack.
YOUR DEVICE
5
5V 1A
5V 1A
USB CHARGE
USB CHARGE
6
7
5V 1A
USB CHARGE
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
RECONNECTION
1) Power on the ATV28B by pressing and holding down the
1) Power on the ATV28B and your last paired device Bluetooth.
Play/Pause multifunction
button for 3 seconds, the 2 blue and 3 red LEDs will start to alternately flash, signalling
that the ATV28B is now ready for Bluetooth pairing.
2) The unit will now automatically reconnect
Tip
s
:
EN
2) Now that the ATV28B is in pairing mode:
ANDROID users:
a. Go into the Settings Menu of your device
b. Enter the Bluetooth Menu
c. TURN ON Bluetooth and press SCAN
d. “ATV28B” will now be displayed under AVAILABLE DEVICES
e. If prompted, enter passcode: “0000”
ATV28B
BLUETOOTH® ENABLED | ALL-TERRAIN SOUND SYSTEM
Tip
s
:
EN
3) If your device was previously paired with the ATV28B, but it wasn’t the last paired
device:
a. Ensure no other devices are currently paired
b. Enter the Bluetooth Menu on your device being paired
c. “ATV28B” will display under AVAILABLE DEVICES
d. Choose the “ATV28B” to reconnect
NOTE: You have 2 minutes before you must restart this procedure over again.
USER MANUAL
Nyne Cruiser
6
5
7
Nyne Cruiser
MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION
MULTIFUNCTION CONTROLLER AUX-IN OPERATION
Tips:
Nyne Cruiser
EN
6
1) Press the
PLAY/PAUSE once to start playing music or press the PLAY button from
your device touch screen
2) To skip songs or advance, press the
NEXT TRACK button
3) To select the previous song, press the
PREVIOUS TRACK button
4) If the device is out of range from the ATV28B, it will disconnect automatically:
a. To reconnect once device is back in range, press the
button once
b. The ATV28B will now reconnect to the device
iOS users:
a. Go into the Settings Menu of your iOS device
b. Enter the Bluetooth Menu
c. TURN ON Bluetooth
d. “ATV28B” will now be displayed
e. If prompted, enter passcode: “0000”
Play/Pause
VOLUME CONTROL
1) Power on the ATV28B by pressing and holding down the
PLAY/PAUSE multifunction button for 3 seconds
2) Disconnect any paired Bluetooth device by turning off Bluetooth in your devices
Settings Menu
3) Connect the integrated 3.5mm AUX-IN cable located on right side of the MFC to your
devices headphone jack
4) Route the wire back to ATV28B, secure your device in a safe posistion
VOLUME CONTROL
4) To raise the volume Press and Hold the
VOL + button 2 ~ 3 seconds
5) To lower the volume Press and Hold the
VOL - button 2 ~ 3 seconds
5) To raise the volume Press and Hold the
VOL + button 2 ~ 3 seconds
6) To lower the volume Press and Hold the
VOL - button 2 ~ 3 seconds
3) If the ATV28B is not seen, repeat the above steps to refresh the “Device List”
Tips:
4) When the connection is successful, you are now ready to stream music from your favorite
media player to the ATV28B
BEFORE INSTALLING THIS PRODUCT
1
2
3
4
5
6
7
To avoid battery exhaustion, be sure to occasionally run the
EN
vehicles engine while using this product.
Using this product without running the engine can drain the battery.
MULTI-FUNCTION
CONTROLLER
UNIT
10
INSE
RT
7
7
ALLEN HEAD
BOLT
SNAP
BRACKET
USB CHARGE
Fuse is located inside the power adaptor
Turn counter clockwise to open
INSERT
RIGHT
POWER ADAPTOR
QUICK RELEASE
POWER ADAPTOR
(INCLUDED)
Nyne Cruiser
Nyne Cruiser
Replace with 15A AGC Fuse type only
6
OPTIONAL DIRECT BATTERY WIRING CIRCUIT
20A
Recommended 12 ~ 14ga Wire
(not included)
BATTERY
Fuse and fuse holder
(not included)
RED
Normally open switch
(not included)
Ground wire
BLACK
Chassis
ground
point
Chassis
ground
point
5
Metal frame
SPECIFICATIONS
BLUETOOTH
• Version: 3.0 w/ EDR
• A2DP
• Range: 33ft (10m) Class 2
FOR ILLUSTRATION PURPOSES
YOUR VEHICLE MAY VARY
4
Nyne Cruiser
TOOLS NEEDED:
- 12mm Socket, Wrench or Pliers
- 6mm Allen Wrench
3
5V 1A
Mounting straps should be double checked to be sure they are
pulled tight and secure before each use of the vehicle.
5V 1A
5V 1A
USB CHARGE
SPEAKERS
AMPLIFIER
GENERAL
USB CHARGE
EN
Tips:
3
ATV28B-UM-POSTER-STYLE-FINAL-v1.0.indd 2
WASHER
HANDLEBAR
CLAMP
293.2
201.4
5
4
PRINTED IN CHINA
Mini-DIN
Connector
LOCK NUT
RUBBER
SHIM
Route strap
through the hole
and to vehicle
frame
CAUTION!!
INSERT
Align arrows
Nyne Cruiser
EN
Copyright © 2015 BOSS AUDIO Inc.
VER:1.0 EN
or
Nyne Cruiser
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including
photocopying, recording, or other electronic or mechanical methods, without the prior written permission of AVA Enterprises Inc.
0815
LEFT
Tips:
5V 1A
USB CHARGE
Route strap
through the hole
and to vehicle
frame
iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries
Android is a trademarks of Google Inc. registered in the U.S. and other countries.
BOSS Audio Systems is not affiliated with Apple Inc. or Google Inc.
MFC
Z-BRACKET
SPEAKER MOUNTING SUGGESTIONS
Route
strap
723.8
around the speaker body to vehicle frame
www.bossaudio.com | 805-751-4853
Tech Support: www.bossaudio.com/technical-support
ALLEN HEAD
BOLT
5V 1A
USB CHARGE
LOCK NUT
15A
6
When replacing the fuse, be sure to only use a fuse of the rating specified on
this product. To avoid short-circuiting, cover any disconnected leads with insulating
tape. It is especially important to insulate any unused wires, which if left uncovered
may cause a short circuit. When connecting other devices to this product, refer to
the manual for the product to be connected. The black cable is ground, make sure
to connect the ground wire first. Ensure that the ground wire is properly connected
to metal parts of the vehicles body frame or direct to the battery if your vehicle
does not have a grounded chassis frame The ground wire of this units power amp
and a second powered system must be connected to the frame separately with
different screws. If the screw for the ground wire loosens or falls out, it could result
in fire or malfunction.
BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
WIRE DIAGRAM
MULTI-FUNCTION CONTROLLER MOUNTING
To avoid potential shorts in the electrical
system, be sure to disconnect the (–) battery cable before installation. Use this unit
with a 12-Volt battery and negative ground8
9
ing only. Failure to do so may result in a
fire or malfunction.
Make sure your device headphone volume is set at 75% level
Tips: EN stowing.
before
your device Bluetooth volume is set at 75% level
EN sure
Tips: Make
before
stowing
7.95”
(202mm)
• Dimensions: 6.5”
• Impedance: 4Ω
• Cone Type: PP CARBON + RUBBER SURROUND
• Tweeter Size: 1” PEI SOFT DOME
11.58”
(294mm)
• Maximum Output Power: 450 Watts
• Input impedance: 10kΩ
• Frequency Response: 45Hz-25kHz
• Operational Power: 14.4VDC (10-16V allowable)
• MAX Current Draw: 13.7A
• Replacement Fuse: 15A AGC TYPE
• Color: Black
• Weight: 14.26lbs / 6.47Kg
• Dimensions cm WxHxD: 72.4 x 20.2 x 29.4
• Dimensions Inches WxHxD: 28.50 x 7.95 x 11.58
28.50”
(724mm)
• Storage Temperature: 5oF to 113oF / -15oC to 45oC
• Operation Temperature: 14oF to 140oF / -10oC to 60oC
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
7/20/2015 1:11:14 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising