Boss Audio Systems | ATVB95LED | Owner Manual | Boss Audio Systems ATVB95LED Owner manual

Boss Audio Systems ATVB95LED Owner manual
INFORMATION TO THE USER
Thank you for purchasing this
FCC COMPLIANCE STATEMENT
ATVB95LED All-Terrain Sound System
Please read through these instructions carefully so you will know
how to operate your model properly.
$fter you haYe Ànished reading the instructions keep this document
in a safe place for future reference.
1 - AT B 5 E All-Terrain Speaker System
1 - Bluetooth Multi-Function Controller
1 - Handlebar Mounting Kit
1 - Quick Connect Power Extension Adaptor
4 - Hi-strength Nylon Mounting Straps
USER MANUAL
1 - User Manual Quick Start Guide / Poster
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by
user. This equipment complies with FCC/ IC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is desirable that it should
be installed and operated keeping the radiator at least 20 cm or more away from
person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration
or modi cations carried out without appropriate authori ation may invalidate the
user’s right to operate the equipment.
THIS PACKAGE CONTAINS
QUICK START GUIDE
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
QUICK START GUIDE
1 - Warranty Card
INFORMATION TO THE USER
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks is under license.
Other trademarks and trade names are those of their respective owners.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Relocate or reorient the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit di erent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/T technician for help.
BEFORE YOU START
GETTING STARTED
IMPORTANT SAFETY PRECAUTIONS
GETTING TO KNOW YOUR
ATVB95LED MULTIFUNCTION CONTROLLER (MFC)
o not attempt to install or service this product by yourself. Installation or servicing of this
product by persons without professional training and experience in electronic equipment
and motori ed vehicle accessories may be dangerous and could expose you to the risk of
electric shock, injury or other ha ards
Refer any repairs to a quali ed BOSS AUDIO SYSTEMS Service Center
The ATVB95LED can be powered from a vehicles cigarette lighter / auxiliary power port,
or hard wired directly to the battery through an optional relay / accessory switch
When wiring directly to the vehicles battery, be sure to disconnect the batteries negative
terminal wire before starting any wiring procedures, it is suggested that an optional fuse
and fuse holder (not included) with minimum rating of 20 Amps be in line with the positive
battery terminal
The ground cable length should not exceed 18-inches (See wiring diagram)
The ATVB95LED has a weather resistant design, it should not be submerged under
water under any circumstances
Use only the installation parts provided with the ATVB95LED
Ensure the MFC is not mounted behind metal
o not install the MFC next to the vehicles electronics
Never install this product in a heated location
CAUTION!!
BLUETOOTH OPERATION
CAUTION!! Using other mounting methods may void this warranty
BLUETOOTH OPERATION
5
6
3.5mm AUX-IN
1
2
3
4
5
6
7
8
9
CABLE NOT INCLUDED
MFC - MULTIFUNCTION CONTROLLER
LED LIGHTBAR ON/OFF
POWER ON/OFF - Press and hold for 3 seconds
NEXT TRACK
PLAY/PAUSE
BLUETOOTH PAIRING INDICATOR - BLUE COLOR
PREVIOUS TRACK
VOL DOWN
VOL UP
STREAMING MUSIC
2
AUX-INPUT
2
2
YOUR DEVICE
3
8
4
7
8
NOT FOR AUDIO PLAYBACK
WARNING - Always consult a professional installer
ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
4
9
1A USB
CHARGING
INSTALLATION PRECAUTIONS
3
2
1
o not operate mobile equipment while driving a motori ed vehicle safe driving and
safety consideration of others should always be your highest priority.
In the event you should notice smoke, strange noises or odor from this product, or any
other abnormal signs, immediately turn o the power and consult your dealer or the nearest authori ed BOSS AUDIO Service Center. Using this product in this condition may result
in permanent damage to the system.
Set your volume control at a low setting, then slowly increase the sound until you can
hear it comfortably without distortion, or ear discomfort.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
- o not turn up the volume so high that you can’t hear what’s around you.
- Use caution or temporarily discontinue use in potentially ha ardous situations.
8
ATVB95LED can play audio
from any device that has a
3.5mm headphone audio jack.
4
4
5
7
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
1) Power on the MFC by pressing and holding down the
4
2
5
2) Press the PLAY/PAUSE
button for 3 seconds, the
signalling that the MFC is now ready for Bluetooth pairing.
Power button for 3 seconds
BLUE LED will quickly ash,
3) Now that the MFC is in pairing mode:
ANDROID users:
a. Go into the Settings Menu of your device
b. Enter the Bluetooth Menu
c. TURN ON Bluetooth and press SCAN
d. “BOSS AUDIO ATV” will now be displayed under AVAILABLE DEVICES
e. If prompted, enter passcode: “0000”
iOS users:
a. Go into the Settings Menu of your iOS device
b. Enter the Bluetooth Menu
c. TURN ON Bluetooth
d. “BOSS AUDIO ATV” will now be displayed
e. If prompted, enter passcode: “0000”
6
7
RECONNECTION
LIFT TO OPEN
ALWAYS CLOSE WHEN NOT IN USE
NE ER USE AU -IN WHEN IN MU or WATER
1) Power on the MFC and your last paired device Bluetooth.
2) The unit will now automatically reconnect
MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION
MULTIFUNCTION CONTROLLER AUX-IN OPERATION
3) If your device was previously paired with the MFC, but it wasn’t the last paired
device:
a. Ensure no other devices are currently paired
b. Enter the Bluetooth Menu on your device being paired
c. “BOSS AUDIO ATV” will display under AVAILABLE DEVICES
d. Choose the “BOSS AUDIO ATV” to reconnect
1) Press the 4 PLAY/PAUSE once to start playing music or press the PLAY button from
your devices touch screen
1) Power on the ATVB95LED by pressing and holding down the 2 POWER button for
3 seconds
2) isconnect any paired Bluetooth device by turning o Bluetooth in your devices
Settings Menu
3) Connect your 3.5mm AUX-IN cable located on the front of the MFC to your devices
headphone jack, the E will illuminate RED color when in AUX-IN mode
4) Route the wire back to the MFC, secure your device in a safe position
4) If the device is out of range from the ATVB95LED, it will disconnect automatically:
a. If your device does not reconnect automatically once it is back in range, press
BOSS AUDIO ATV in your devices Bluetooth settings
b. The MFC will now reconnect to the device
5) If you turn o BLUETOOTH on your device, then you must manually press
“BOSS AUDIO ATV” from your BLUETOOTH list to reconnect to the MFC
3
2) To skip songs or advance, press the
3) To select the previous song, press the
NEXT TRACK button
6
PREVIOUS TRACK button
VOLUME CONTROL
VOLUME CONTROL
4) To raise the volume press the
8
VOL UP button
5) To lower the volume press the
7
VOL DOWN button
NOTE: The MFC can remember up to 8 devices, to clear all previously paired devices,
4) If BOSS AUDIO ATV is not seen, repeat the above steps and refresh the “Device List”
5) You will hear a tone when the connection is successful, you are now ready to stream
music from your favorite media player to the ATVB95LED
NOTE: You have 2 minutes before you must restart this procedure over again.
BEFORE INSTALLING THIS PRODUCT
press and hold
Tips:
2
To avoid battery exhaustion, be sure to occasionally run the
vehicles engine while using this product.
Using this product without running the engine can drain the battery.
LEFT
or
8
VOL UP button
6) To lower the volume press the
7
VOL DOWN button
7) To MUTE the volume press the
POWER button for 10 seconds
Make sure your device Bluetooth volume is set at 100% level
before stowing
Tips:
Tips:
4
PLAY/PAUSE button
Make sure your device headphone volume is set at 100% level
before stowing.
WIRE DIAGRAM
MULTI-FUNCTION CONTROLLER MOUNTING
To avoid potential shorts in the electrical
system, be sure to disconnect the ( ) battery cable before installation. Use this unit
with a 12- olt battery and negative grounding only. Failure to do so may result in a
re or malfunction.
5) To raise the volume press the
RIGHT
Align arrows
Mini-DIN
Connector
INSERT
When replacing the fuse, be sure to only use a fuse of the rating speci ed on
this product. To avoid short-circuiting, cover any disconnected leads with insulating
tape. It is especially important to insulate any unused wires, which if left uncovered
may cause a short circuit. When connecting other devices to this product, refer to
the manual for the product to be connected. The black cable is ground, make sure
to connect the ground wire rst. Ensure that the ground wire is properly connected
to metal parts of the vehicles body frame or direct to the battery if your vehicle
does not have a grounded chassis frame The ground wire of this units power amp
and a second powered system must be connected to the frame separately with
di erent screws. If the screw for the ground wire loosens or falls out, it could result
in re or malfunction.
(Cable not included)
Fuse is located inside the power adaptor
Turn counter clockwise to open
POWER ADAPTOR
Replace with 10A AGC Fuse type only
QUICK RELEASE
POWER ADAPTOR
(INCLUDED)
10A
INSERT
OPTIONAL DIRECT BATTERY WIRING CIRCUIT
15A
Recommended 12 ~ 14ga Wire
(not included)
BATTERY
Fuse and fuse holder
(not included)
Normally open switch
(not included)
Ground wire
BLACK
Chassis
ground
point
Chassis
ground
point
SPEAKER MOUNTING SUGGESTIONS
RED
Metal frame
Route strap
around the speaker body to vehicle frame
FOR ILLUSTRATION PURPOSES
YOUR VEHICLE MAY VARY
SPECIFICATIONS
BLUETOOTH
Route strap
through the hole
and to vehicle
frame
ersion: 3.0 w/ E R
A2 P / A RCP
Range: 33ft (10m) Class 2
Route strap
through the hole
and to vehicle
frame
SPEAKERS
imensions: 8”
Impedance: 4
4
Cone Type: PP CARBON RESIN C OTH
Tweeter Si e: 1” PEI SOFT OME
AMPLIFIER
Maximum Output Power: 700 Watts
Class: AB
Input impedance: 10k
Frequency Response: 45H -25kH
0616
GENERAL
CAUTION!!
Mounting straps should be double checked to be sure they are
pulled tight and secure before each use of the vehicle.
ATVB95LED-UM-POSTER-STYLE-FINAL-v1.0.indd 2
TOOLS NEEDED:
- Wrench or Pliers
- Allen Wrench
Operational Power: 14.4 C (10-16 allowable)
MA Current raw: 13.7A
USB Charging: 1A
5 C /- 5%
Replacement Fuse: 10A AGC TYPE
Color: Black
Unit Weight: 22.2lbs / 10Kg
imensions cm WxHx : 83.00 x 23.50 x 34.00
imensions Inches WxHx : 32.68 x .25 x 13.38
Storage Temperature: 5oF to 113oF / -15oC to 45oC
Operation Temperature: 14oF to 140oF / -10oC to 60oC
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
5/4/2016 12:14:55 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising