Boss Audio Systems | BV7340 | Owner Manual | Boss Audio Systems BV7340 Owner manual

Boss Audio Systems BV7340 Owner manual
4 10 R - 02 1011
This radio is equipped with the most advanced "TOUCH SENSE PANEL", so that it is easy and
convenient to use while driving.
Tips Here are some tips to show you how easy it is to use this touch sense panel:
Using a very light touch on the radio panel will activate that feature. You will not need to
"PRESS" hard on the panel to make this radio change features.
The power button along with some of the buttons that have dual functions, will need to be
"TOUCHED" from 2 to 3 seconds to make the change.
The best area to "TOUCH" on the panel to make it activate is the illuminated or lighted area. For
example, just touch for 2 to 3 seconds the illuminated power symbol and the unit will turn on or
off.
WARNINGS
When Driving
Keep the volume level Iow enough to aware of
the road and traffic conditions.
CAUTION
In some countries, it's unlawful to operate a
vehicle while video is displayed in the
driver's viewing area. Please always switch
the unit's display to "Font Type Display"
mode by pressing the DISP button while
driving.
For safety reason, the driver should only
enjoy / watch the video while the car is in
parking mode.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause electrical
shorts, fire or other damage.
CAUTION
In order to avoid any accident, the driver
must not watch video while driving. This unit
is designed to not allow watching moving
video while driving. Park your car in a safe
place and engage the ‘PARKING BRAKE
WIRE' before watching moving video.
When Parked
Parking in direct sunlight can produce very
high temperatures inside your vehicle. Give the
interior a chance to cool down before starting
playback.
Use the Proper Power Supply
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OR PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR BY YOURSELF PLEASE REFER
SERVICING TO A
QUALIFIED
TECHNICIAN.
NOTE:
1. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
2. TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
I N T E R F E R E N C E , U S E O N LY T H E
RECOMMENDED ACCESSORIES.
3. THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. Patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
This product is designed to operate with a 12
volt DC, negative ground battery system (the
regular system in a North American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into the slot
of this player. Failure to follow this may cause
malfunction or permanent damage due to the
precise mechanism of this unit.
CAUTION
THIS MOBILE MultiMedia PLAYER IS A
CLASS I LASER PRODUCT. THIS UNIT USES
A VISIBLE/INVISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION IF
EXPOSED DIRECTLY. BE SURE TO
OPERATE THE MOBILE MultiMedia PLAYER
CORRECTLY AS INSTRUCTED.
E-2
DISC AND FORMAT SUPPORTS
Unsupported Discs
This unit can play various video/audio format
which stored into Disc/USB or SD card on
Media Player.
8 cm Disc
CDV, CDI, CDG,
LD
MultiMedia RAM
The following chart helps you to check if a
disc is supported by this unit, as well as what
functions are available for a given disc type.
Disc format
Note on Region Code
MultiMedia players and MultiMedia Video discs
Have their own Region Code numbers. This unit
Can playthe disc of all
regioncode numbers.
Digital Versatile Discs (MultiMedias)
ALL
Video CDs (VCDs)
Disc Maintenance
Digital VersatileDiscs Recordable
(MultiMedia+/-R)
Before playing, wipe the disc using a clean
cloth, working from the center hole towards the
outside edge.
Never use benzene, thinners, cleaning fluids or
anti-static liquids or
any other solvent.
Digital VersatileDiscs Rewritable
(MultiMedia+/-RW)
Compact Discs (CDs)
CD Recordable (CD-R)
NOTE
CD Rewritable (CD-RW)
Audio Format
Playback CD-DA and MP3 or WMA digital
music file on CD-ROM or MultiMedia- ROM or
USB or Memory Card.
Note of MP3 and WMA:
Support Maximum 2000 files
Maximum 30 characters display
Supported Sampling frequencies; 32kHz,
44.1kHz, 48kHz.
Supported Bit-Rates: 64-256 kbps variable bit
rate
A disc may become somewhat scratched
(although not enough to make it unusable)
depending on you handle it and conditions
in the usage environment. Note these
scratches are not an indication of any
problem with the player.
Label side
Up
Do not bend
Video Format
Playback IMAGE JPEG, MultiMedia Video, MPEG4 .
On CD-ROM or MultiMedia-ROM or USB or SD. card
Noted of MPEG4
Supported decoding MPEG-4 video defined by
ISO 14496-2 Standard:
1. Simple Profile (SP) and
2. Advance Simple Profile (ASP)
Supported file format: MP4 and .M4a (audio
only)
E-3
Never touch
the under side
of a disc
Wipe the disc surface
from the
center to the edge.
INSTALLATION
The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your customer car audio dealer or a company
suppling kits.
If you are not sure how to install this unit correctly, have it installed by a qualified technician.
1
3
To attach the front panel back to the unit
chassis, firstly join the right guide block
hole to the right cylinder (Step 1 ), then
join the left guide block hole and the left
cylinder
(Step 2 ).
Trim Plate
Step 2
Step 1
18
2
2m
m
53
1
Disassembly
tool
mm
Screw
2
Dashboard
Sleeve
3
4
Bend the appropriate tabs
to hold the sleeve firmly
in place.
Tr i m
Plate
Sleeve
When you stand the unit, be careful
not to damage the fuse on the rear.
Control
Panel
Removing the unit
Before removing the unit, release the rear section.
2
1
3
Step
2
Step
1
Disassembly
tools
Release
To remove the front panel:
.
1. Press the Panel Release Button.
2. After flipping down the front panel, push rightwards
(Step 1 ), then draw the left of the ( Step 2 ).
Trim Plate
Insert the two disassembly tools, then pull
them as illuatrated so that the unit can be
removed.
When installing the unit without
using the sleeve
When using the optional stay
Stay(option)
Screw
Washer
Nut
Dashboard
Screw(4x12mm)
Screw
Sleeve
Screw
Bracket
30°
Install the unit at an angle
of less than 30°.
Installation using the screw holes on the sides of the unit.
Fastening the unit to the factory radio mounting bracket.
E-4
CONNECTING THE SYSTEM
About The Reverse Wire For
Back Up Camera System
About Parking Wire
CAUTION
In order to avoid any accident, the driver must
not watch video while driving. This unit is
designed to not allow watching moving video
while driving. Park your car in a safe place and
engage the parking brake before watching
moving video.
If user connected a back up camera system
to this unit, when the vehicle is in reverse
Gear (Back Up mode), the front in-dash TFT
display will automatically switch to Back Up
Camera Video signal regardless whatever
mode is currently displayed on the front indash TFT.
NOTE
Tips
The Video Blocking system under Parking
Brake NOT ENGAGED only control this
unit's display, This system will not affect the
Video Output thru the rear RCA Video
Output.
Be sure to connect Reverse wire properly.
(please see more details on “ Wiring
Diagram.”)
TIPS
Be sure to connect Parking Brake connection
lead. ( please see more details on “ Wiring
Diagram.”)
NOTE
If watch moving video from Disc or AV In
source but Parking Brake is NOT
PROPERLY CONNECTED, the video signal
will be blocked by the system.
E-5
CONNECTING THE SYSTEM
Wiring Diagram
BLACK
ANTENNA
JACK
ANTENNA
EXTENDER
CABLE
L
FRONT LINE OUT
WHITE
HC-L
R
BLACK
RCA-TO-RCA CABLE
(not supplied)
SUB-W OUT
REAR
AMP
HC-R
RED
BACK UP CAMERA IN
OR VIDEO IN
YELLOW
REAR LINE OUT
ISO MALE CONNECTOR
VIDEO IN
AUDIO IN (RIGHT)
RCA TO RCA CABLE
(NOT INCLUDED)
ISO CONNECTO
SOCKET
(See Figure 1)
VCR or MultiMedia
RED
or
AUDIO IN R
GAME CONSOLE
AUDIO IN (LEFT)
WHITE
AUDIO IN L
VIDEO OUT
VIDEO OUT
YELLOW
WHITE
RED
Brake
Switch
Connect to Parking Brake.
PINK
PARKING
BRAKE ( )
AMP
2.5m extension wire
Ground
ORANGE
7
6
8
1
3
5
7
2
4
6
8
FUSE
5
4
Figure 1
SUB
WOOFER
CONNECTOR A
ISO CONNECTOR 4PIN+8PIN
FEMALE WITH MALE TERMINAL
ISO CONNECTOR WIRING CHART
A4
WIRE COLOR
YELLOW
FUNCTION/LABEL
BATTERY(+)
A5
BLUE
POWER ANTENNA
A7
RED
IGNITION(ACC)
A8
BLACK
GROUND
B1
VIOLET
RIGHT REAR SPEAKER (+)
B2
VIOLET/BLACK
RIGHT REAR SPEAKER (-)
B3
GREY
RIGHT FRONT SPEAKER (+)
B4
GREY/BLACK
RIGHT FRONT SPEAKER (-)
B5
WHITE
LEFT FRONT SPEAKER (+)
B6
WHITE/BLACK
LEFT FRONT SPEAKER (-)
B7
GREEN
LEFT REAR SPEAKER (+)
B8
GREEN/BLACK
LEFT REAR SPEAKER (-)
PIN
Connect to Back Lamp Lead +
Gearbox
Switch
SUB-W OUT
3
2
RCA TO RCA CABLE
(NOT INCLUDED)
1
Reverse gear signal
REVERSE(+)
OVERRIDE
WIRE
CONNECTOR B
E-6
P
R
N
D
2
L
THE FUNCTIONS OF MAIN UNIT
d
F L
AV IN
m
s
DISC
SLOT
No.
Item
RESET
Decriptions
RELEASE
Press this button to open the control panel.
AUDIO MENU
Short press this button to access into the Audio Menu mode.
POWER
Press this button or any other button on the front panel
(except Release button) to turn the unit on. Hold & press this
button again to turn the unit off.
ENCODER
VOLUME KNOB
Rotate the Encoder Volume Knob to increase and decrease the
volume. ( The Maximum volume level is “46”.)
BAND
Under Tuner mode, short press this button to change between
BAND FM1, FM2, FM3, AM1(MW1) ( or AM2 ( MW2 ) if available).
(PLAY/PAUSE)
F
SLOT
Under Media playback mode, short press this button to Pause/
Resume Play the music.
FUNC
(FUNCTION)
Press this button to enter into the Function mode.
XBS
Hold & press this button to turn On/Off the Bass booster function.
E-7
THE FUNCTIONS OF MAIN UNIT
d
DISP
(DISPLAY)
Under Media playback mode, short press this button to switch
between OSD display or Video display mode.
MUTE
Short press this button to turn the Mute On/Off.
LIST
Under tuner mode,press this button to Show The List of stored
station.
Under the Media playback mode, press this button to list the
searching of Tracks or Files on the Media playback mode.
Under the MultiMedia/MP4 mode, press this button to list the
searching of MultiMedia Root Menu or Files on the playback mode.
L
Under the VCD mode, press this button to turn On/Off the
PCB function.
&
s
EQ
Hold & press this button to select the preset Equalizer setting:
OFF -> ROCK -> POP -> JAZZ -> TECHNO -> CLASSIC
TUNE UP/DOWN
Under tuner mode, press and hold this button momentarily to
enter into the Auto Seek/ Manual Seek mode.
FILE UP/DOWN
Under media playback mode, press these buttons to skip a
chapter / track / scene / file.
FAST BACKWARD
/ FORWARD
Under media playback mode, press and hold momentarily to
fast forward / backward the Disc.
SOURCE
Press this button to select different source playback mode:
TUNER / DISC / USB / SD / AV IN MODE
(ESC)
DIM
m
DISC
SLOT
RESET
SLOT
Hold & press this button to adjust the TFT dimmer High or
Low.
MENU
(SYSTEM MENU)
Press this button to access into the System Menu mode.
EJECT
Press this button to eject the Disc.
DISC SLOT
Insert the disc into CD slot.The CD will begin to play.
RESET
User can reset the unit to its default setting. Press this button
by using a ball-point pen or sharp object.
SD CARD
SLOT
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the SD Card.
USB SLOT
This unit can support playback MP3/WMA/JPEG/MPEG4/
DIVX format which are stored on the USB memory stick.
( The USB slot behind the
USB/AV-IN jack door.)
AV-IN JACK
AV IN
Press this button to quick return previous menu or mode.
(The AV-IN slot behind
the USB/AV-IN jack door.)
This unit is allowed to connect with external Audio/Video
system such like Digital Camera or Game Console. User
can connect the external A/V system thru the A/V in jack on
front panel.
E-8
THE FUNCTIONS OF REMOTE CONTROL
10
2
1
8
9
4
5
13
11
14
6
17
12
L
15
19
18
20
3
21
24
16
25
22
7
26
23
No.
Button
1
2
3
Decriptions
Item
POWER ON
OFF
Press this button to turn On / Off the unit.
MUTE
Press this button to turn the Mute On / Off.
AUDIO MENU
Press this button to enter into the Audio Menu mode.
AUDIO
SYSTEM MENU Hold & press this button to enter into the System Menu mode.
4
SOURCE
Press this button to enter into the SOURCE mode.
5
VOLUME +
Press this button to increase the volume.
6
VOLUME -
Press this button to decrease the volume.
EQ
Press this button to enter into the preset Equalizer setting
mode.
Under the tuner mode, press this button to access the
Manual Seek mode.
Under the media playback mode, press this button fast
forward through the music under media player mode.
7
EQ
8
Under the tuner mode, press this button to access the
Manual Seek mode.
Under the media playback mode, press this button fast
backward through the music under media player mode.
9
10
UP/DOWN
LEFT/RIGHT
Use these buttons to move cursor up/down/left/right.
E-9
THE FUNCTIONS OF REMOTE CONTROL
Under the tuner mode, press this button access Auto Seek mode.
11
Under the media playback mode, press this button to skip
backward of the previous chapter.
Under the tuner mode, press this button access Auto Seek mode.
12
Under the media playback mode, press this button to skip
forward of the next chapter.
13
ENTER/OK
Use this button to confirm the selection.
14
PLAY/PAUSE
Press this button to Pause / Resume Play the music under
media playback mode.
BAND
Press this button to return previous menu. Under the tuner
mode, press this button to change the radio Band.
When in media playback mode use this button for track or
file number direct access and use when function need
numeric selection or input.
BAND
16
~
15
NUMERIC
BUTTONS
17
D
OSD
DISPLAY
Press OSD button and the information displayed on the TFT
may vary according to this disc or files type.
18
F
FUNCTION
Press this button to enter into the function mode.
19
L
LIST
Under tuner mode,press this button to Show The List of
stored station.
Under the Media playback mode, press this button to list the
searching of Tracks or Files on the Media playback mode.
Under the MultiMedia/MP4 mode, press this button to list the
searching of MultiMedia Root Menu or Files on the playback mode.
Under the VCD mode, press this button to turn On/Off thePCB
function.
GOTO
20
GOTO
21
ZOOM
22
Under the MP3/WMA mode, press this button to direct
playback time.
Under the MultiMedia mode, press this button to direct Title/Chapter
/ Time selection.
ZOOM
When playback the MultiMedia, press this button repeatedly to
increase the magnification level.
ANGLE
ANGLE
Under MultiMedia mode, press this button while playing a scene
recorded with multiple angles to change the angle.
23
DIMMER
DIMMER
Press this button to adjust the TFT dimmer High or Low.
24
DISC
AUDIO
DISC AUDIO
Under MultiMedia mode, press this button during playback to change
the audio language, if available on the disc.
25
SUB
TITLE
SUBTITLE
Under MultiMedia mode, press this button during playback to turn
on/off subtitles and change the subtitles.
26
TITLE
TITLE
Under MultiMedia mode, press this button to bring up the Title Menu.
E - 10
ADJUST AUDIO SETTINGS
Press
Button to access the Audio Menu.
The below Audio Setting can be select:
BASS (Bass Level)
User has 5 seconds to use the
to adjust
the desired Bass level range from -6 to +6.
FADER
User has 5 seconds to use the
to adjust
the Fader between the front and rear speakers
from R12 (full rear) to F12(full front).“C00”
represents an equal balance between the front
and rear speakers.
TREBLE (Treble Level)
User has 5 seconds to use the
to adjust
the desired Treble level range from -6 to +6.
SUB-W (Subwoofer)
Turn the
ON / OFF.
BALANCE
User has 5 seconds to use the
to adjust
the Balance between the right and left
speakers from R12 (full right) to L12 (full left).
“C00” represents an equal balance between
the right and left speakers.
E - 11
to selec the Subwoofer function
ADJUST SYSTEM MENU SETTINGS
[
m
] MENU (System Menu)
m
Hold & press the
Button to get into the
System Menu. User can use
to
navigate thru the menu setting & rotate
to
adjust the setting.
VOLUME PGM (Programmable
Turn-on Volume)
DIMMER
This option allows the adjustment of the volume
level of the radio will automatically assume
when turning on. To program a specific turn on
volume level, use the
to select “VOLUME
LEVEL” level from 00 to 46.
Turn the
to adjust the TFT Backlight level
between High or Low.
TIME SET (CLK)
BACK COLOR (Background)
This option allows the user to select the nine
colors for the Background of the TFT screen.
User can turn the
to select from the
below colors:
WHITE / BLACK / GRAY / BLUE / CYAN /
YELLOW / RED / PURPLE / GREEN
TITLE COLOR
This option allows the user to select the seven
colors for the Title of the TFT screen. User can
turn the
to select from the below
colors:
RED / PURPLE / GREEN / GRAY / BLUE / CYAN
/ YELLOW
The time on the clock will be set to 12:00 as the
default. Program the current time by rotating
the
clockwise to adjust the minutes and
counterclockwise to adjust the hours.
TIME FORMAT
“ 12H ” is the default setting. User can use
the
to choose the Time Format between
“12 Hours” & “24 Hours”
DATE SET
Once in Date Set mode, User can use the
to adjust the Date / Month / Year. Short press
the AUDIO button to confirm the entry and
move to the next entry.
FONT COLOR
INFO (Software Information)
This option allows the user to select the 8
colors of the fonts of the TFT screen. User
can use the
to select the below
colors:
RED / BLUE / GRAY / CYAN / WHITE / YELLOW /
PURPLE / GREEN
This is for displayed the software information of
this unit.
BEEP TONE
The beep tone feature allows the selection of
an audible beep tone to be heard each time a
button is pressed on the face of the radio.
"BEEP TONE ON" is the default display. Rotate
the
to select the “BEEP TONE OFF”
option.
E - 12
TUNER OPERATIONS
f
] FUNCTION BUTTON
BAND BUTTON
Press the
Button under Tuner mode, the
below functions are available for Tuner mode:
F
Press the BAND button to change between FM
bands and or AM(MW) bands.
[
MANUAL Use this funtion to saved the
current frequency to memory
STORE
] LIST BUTTON
LL
Press
Button to get into the Preseted
stations list, and user can use the
to
select which preseted station he would listen
to, and press
button to confirm the
selection.
station.
AUTO
STORE
After Auto Stored & saved the 6
strongest stations, the unit will
automatically enter present scan
one time.
LOCAL
SEEK
This feature is used to designate
the strength of the signals at which
the radio will stop during automatic
tuning. "Distance" is the default,
allowing the radio to stop at a
broader range of signals. To set the
unit to select only strong local
stations during automatic tuning,
press the volume control to select
the local ON/OFF.
AF
ON/OFF
TA
ON/OFF
To change AF in ON or OFF mode.
PTY
You can get into the PTY list to
select the desired PTY mode.
TUNER
AREA
This option allows the selection of
the frequency spacing which is
most appropriate for the area this
unit isused in, U.S.A, EUROPE
[ ]
TUNING UP/DOWN
BUTTON
[ ]
[
1. Long press these buttons to access into the
Manual Seek mode.
2. Press these buttons to access into the Auto
Seek mode, and the unit will auto search for
the next radio station.
To change TA in ON or OFF mode.
NOTE
AF, TA & PTY only appearing in the
function list, after changed the Tuner Area
to “ Europe”.
E - 13
ABOUT RDS
NOTE
AF (Alternate Frequencies)
This unit default at USA Tuner Area. RDS
function only activated after selected the
Tuner Area to “ Europe”.
If the radio signal comming from the current
station is poor, you can turn on the AF
(Alternate Frequency) function to let the unit
search for another station with stronger signal,
but with the same program identification as the
current station automatically.
TIPS
Please refer Tuner operation “ FUNCTION”
for details how to select the Tuner Area.
TA (Receive Traffic
Announcement )
The RDS ( Radio Data System ) function
operate only in areas with FM stations
broadcasting RDS signals. If you tune to an
RDS station, an RDS icon, presenter, and
station/program information is displayed.
If you do not want to miss traffic announcement
during enjoying music, you can turn on the TA
(Traffic Announcement) function.
TA On
When there is traffic announcement,
the unit switches to the tuner mode
(regardless of the current mode) and
begins to broadcast the announcemet
on traffic conditions. When the traffic
announcement is over, it returns to the
previous mode.
TA Off
Traffic announcement does not cut in.
This unit support below RDS features:
PTY (Program Type)
Before tuning to RDS stations, you can select
program type and let the unit search only for
programs of the selected category.
MUSIC GROUP
SPEECH GROUP
POP M , ROCK M
NEWS, AFFAIRS, INFO
EASY M, LIGHT M
SPORT, EDUCATE, DRAMA
CLASSICS, OTHER M
CULTURE, SCIENCE, VARIED
JAZZ, COUNTRY
WEATHER,FINANCE, CHILDREN
NATION M, OLDIES
SOCIAL, RELIGION, PHONE IN
FOLK M, TEST, ALARM
TRAVEL, LEISURE, DOCUMENT
CT (Clock Time)
The RDS signal broadcast together with the
clock time to the unit automatically.
E - 14
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card)
General Operation
[
] SOURCE BUTTON
Ss
Press
button to select DISC, USB, SD
CARD. The unit will automatically start
playback.
[
Album Up
Under List Search mode, press Track Up/Down
as folder up/down on the unit.
00:00:16
/...F1
01/22
064KBPS/T01 MENUETTO.WMA
..
T01 MENUETTO
T02_1KHZ_SINE_W
] PLAY/PAUSE BUTTON
Repeat
Mode
Filter
: Off
: Normal
T03 17HZ SINE W
T04_127HZ_SINE_
Press
button to pause the music. Press
this button again to resume play.
[
f
] FUNCTION BUTTON
Under the Function menu, user can have the
below options for selection:
REPEAT
ONE: play the current track
repeatedly.
ALL: play all tracks repeatedly
ALBUM: play all tracks in the
current folder repeatedly
RANDOM During the disc playback, select
random “ On” to play all tracks on
a CD in random order, select
random “ Off ” will stop the
random play.
[
L
T05 997HZ SINE
T06_10007HZ _ SIN
Music Playing
T07 19997HZ SIN
Title: T01 MENUETTO
[
D
] DISPLAY BUTTON
This DISPLAY interchange button can be used
to interchange between the two types of
DISPLAY INTERFACE, the 'OSD Display
Interface” & 'Media Playback Display interface'.
This is useful when playing a CD or MP3 or
WMA or other music disc and if the user prefers
to see the CD Track No/MP3 File number and
elapse time with bigger numerical fonts, the
Media Playback Display offers a better read out
for the numerical display. User can press the
button to interchange from OSD Display
Interface to Media Playback Display Interface.
d
] LIST SETTING
Under the Media playback, press this button
access into File List Search mode.
File Searching
User can rotate the
to navigate thru the
file list within the 10 sec time out. Press the
Audio button to confirm to start play, or to
open a selected Folder.
OSD Display Interface
00:00:16
01/22
00:00:16
01/22
/...F1
064KBPS/T01 MENUETTO.WMA
..
T01 MENUETTO
T02_1KHZ_SINE_W
T01 MENUETTO
Filter
Repeat
: Off
Mode
: Normal
T02_1KHZ_SINE_W
Repeat
Mode
Filter
: Off
: Normal
T03 17HZ SINE W
T04_127HZ_SINE_
T04_127HZ_SINE_
T06_10007HZ _ SIN
064KBPS/T01 MENUETTO.WMA
..
T03 17HZ SINE W
T05 997HZ SINE
/...F1
T05 997HZ SINE
T06_10007HZ _ SIN
Music Playing
Music Playing
T07 19997HZ SIN
T07 19997HZ SIN
Title: T01 MENUETTO
Title: T01 MENUETTO
Media Playback Display Interface
E - 15
MEDIA PLAYER OPERATIONS (Disc/USB/SD Card)
[ ]
TRACK/FILE SELECT
Insert the SD Card
[ ]
Use TRACK/FILE UP (
) or TRACK/FILE
DOWN (
) button to move to the next track
on the Disc mode. The selected track number
will appear on the display. Press and hold the
button for more than one second to fast
forward or fast rewind through the media.
Media playback mode will resume to normal
play when the button is released.
Back
Insert the USB Stick
Click
Front
Click
Mode Change to SD Card
After an SD card is inserted into the main unit
card slot, press the
Button to select card
mode. The unit will start playing the files
contained on the SD card. Once the unit starts
reading the SD card successfully, the first file
on the SD card will automatically start
playback.
s
CAUTION
This unit does not support any portable
Hard disk / drive.
WARNING
Before removing the USB stick from the
front panel, always remember to switch
off the unit's power or switch to other
mode then remove the USB Stick. Never
try to remove the USB Stick while it is in
use. It may damage the USB Stick, may
cause permanent damage to the unit
and/or cause the unit system to freeze.
E - 16
MULTIMEDIA OPERATION
TIPS
When the MultiMedia MENU, ROOT or
TITLE is displayed on the TFT Monitor,
rotate the Encoder Volume Knob to
navigate thru the file list. Press the Audio
button to open the folder and start
playback.
[
] LIST BUTTON
L
TRACK SELECT
1. Press these buttons to skip forward to the
beginning of the next or previous chapter.
f
] FUNCTION BUTTON
Under the Function menu, user can have the
below options for selection:
] DISPLAY BUTTON
This DISPLAY interchange button can be used
to interchange between the two types of
DISPLAY INTERFACE, the 'OSD Display
Interface” & 'Media Playback Display interface'.
This is useful when playing a CD, MP3, WMA or
other music discs. If the user prefers to see the
CD Track No/MP3 File number and elapse time
with bigger numerical fonts, the Media
Playback Display offers a better read out for the
numerical display. User can press
button
to interchange from OSD Display Interface to
Media Playback Display Interface.
d
[ ]
[
] PLAY/PAUSE BUTTON
D
L
2. Long press these buttons to fast forward or
fast rewind through the disc. Press these
buttons again to resume normal playback.
1. Press this button to pause playback.
2. Press this button again to resume normal
playback.
[
[
Under the MultiMedia playback mode, press
button can access to the MultiMedia Root
menu.
[ ]
Once a MultiMedia disc is inserted into the unit,
the unit will automatically start the playback
from the beginning of the disc, and then the
MultiMedia MENU or ROOT or TITLE in the
MultiMedia disc will appear on the TFT monitor
and “ROOT” will be displayed on the TFT of the
unit.
REPEAT 1. Repeat “CH” to repeat playback
the current the chapter.
2. Repeat “TITLE” to repeat playback
the current title.
3. Repeat “ OFF” to cancel all the
Repeat function.
MultiMedia During playback to change the
AUDIO
audio language(MultiMedia/Divx only).
Under the Video Setting mode,
VIDEO
SETTING there are have below options for
selection:
:
BRIGHT: to adjust the TFT Bright
level from “01” to “09”;
CONTRAST: to adjust the TFT
Contrast level from “01” to “09”;
COLOR: to adjust the TFT Color
level from “01” to “09”;
DEFAULT: setting the Default on
will reset all options of media
function setting to factory default
setting.
ASPECT Selecting the TV Aspect setting
RADIO allows the user to select the aspect
ratio of the TV (MultiMedia and VCD only).
The following options are available:
OSD Display Interface
4:3 = Aspect ratio of TV is 4:3.
16:9=Aspect ratio of TV is 16:9.
Both wide screen and 4:3
contents will fill the entire
screen.
Media Playback Display Interface
E - 17
AV-In Mode
AV in-2
Select the AV Mode
Your can connect up to 1 AV device, press
Button to enter into the AV mode:
AV in - 1 = Front panel AV in (Optional)
AV in - 2 = RCA back of unit (Optional)
Connect the external signal to the RCA line in
jack located at the rear of the unit , then press
Button to select AV in-2.
s
s
TIPS
AV in-1
This unit is allowed to connect with external
Audio/Video system such like Digital Camera
or Game Console. User can connect the
external A/V system thru the A/V in jack on front
panel.
If there is no any external AV System input,
then the TFT will be show “ NO VIDEO
SIGNAL”.
Connect the A/V In
Connect the external signal to A/V in jack
located at the front of the panel, then press
Button to select A/V mode. Press
Button
again to cancel A/V mode and retrun to
previous mode.
s
s
Left Track
Right Track
Ground
Video
E - 18
SPECIFICATIONS
TFT Screen Section
Screen Size: 3.2”(Measured Diagonally)
Screen Type: TFT Liquid Crystal Display active matrix
Resolution: 320 x 240
MultiMedia / CD Section
Compatible Disc/Format
Signal to Noise Ratio
Dynamic Range
Frequency Response
Channel Separation
See “ Disc Note” for more details description
> 90 dB
> 90 dB
20Hz to 20Khz +/-3dB
2 Channel (Stereo) >60dB @1khz
Video Section
Color System
Video Output
Video Input
NTSC / PAL/SCEAM
Composite 1.0 Vp-p (+/- 0.2) 75 - ohm
Composite 1.0 Vp-p (+/- 0.2) 75 - ohm
Audio Section
Max Output Power
Load Impedance (speakers)
Line out level / load
Line out Impedance
80W x 4 channels
4 ohms
400mV / 10k ohm load
200 ohm
Auxiliary Input Section
Frequency response
Input Maximum Voltage
Input Impedance
Radio Section
FM
Frequency Range
Usable Sensitivity
Stereo Separation
S/N Ratio
AM or MW
Frequency Range
Usable Sensitivity
S/N Ratio
General
Operating Voltage
Grounding System
Fuse:
Operating Temperature:
Unit Mounting Angle
20Hz to 20KHz -3dB
1200 mV
4.7k ohm
87.5-108.0 MHz (Europe)
87.5-107.9 MHz (U.S.A)
< 15dB at S/N 30 dB
25 dB at 1KHz
50 dB
522-1620 Khz (Europe)
530-1720 (U.S.A)
< 40dB at S/N 20dB
40 dB
DC 11 -14.4V
Negative Ground
15-Amp Mini ATM Type
0°C to 50°C
< 30°
E - 19
TROUBLESHOOTING
Before going through the check list, check wiring connection. If any of the problems persist
after check list has been made, consult your nearest service dealer.
Symptom
Cause
Solution
No power
The car ignition is not on.
The fuse is blown.
Replace the fuse.
Disc cannot be
loaded or ejected
Presence of CD disc inside
the player.
Remove the disc in the player, then
put a new one.
Inserting the disc in reverse
direction.
Insert the compact disc with the
label facing upward.
Compact disc is extremely
dirty or defective disc.
Clean the disc or try to play a new one.
Temperature inside the car is
too high.
Cool off or until the ambient temperature
returns to normal.
Condensation.
Leave the player to off for an hour or so,
then try again.
If the power supply is properly connected to
the car accessory terminal, switch the ignition
key to “ACC”
Volume is in minimum.
Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
The operation keys
do not work
The built-in microcomputer is
not operating properly due to
noise.
Press the RESET button.
Front panel is not properly fixed into
its place
Sound skips.
The installation angle is
more than 30 degrees.
Adjust the installation angle to less
than 30 degrees.
The disc is extremely dirt or
defective disc.
Clean the compact disc. Then try to play a
new one.
The radio does not
work.
The radio station
automatic selection
does not work.
The antenna cable is not
connected.
Insert the antenna cable firmly.
The signals are too weak.
Select a station manually.
ERROR
Mechanism Error
Press the eject button to correct the problem.
If the error code does not disappear, consult
your nearest service dealer.
Disc Error
Maybe disc dirty / disc scratched
/disc upside down.
Replace the disc.
No sound
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
E - 20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising