Euromaid | EDWB14G | User manual | Euromaid EDWB14G 60 cm Freestanding Dishwasher User Manual

Euromaid EDWB14G 60 cm Freestanding Dishwasher User Manual
User Manual
60cm Freestanding
Black Glass Dishwasher
EDWB14G
Product / Installer details
For future reference we suggest that you staple a copy of your purchase receipt here and complete the below so the
information is always at hand.
Product Details
Model number: _________________________________________________________________________________________
Description: ____________________________________________________________________________________________
Serial number: __________________________________________________________________________________________
(Located on the product rating label)
Purchase Details
Date of purchase: _______________________________________________________________________________________
Place of purchase: ______________________________________________________________________________________
Store name: ____________________________________________________________________________________________
Address: _______________________________________________________________________________________________
Telephone: _____________________________________________________________________________________________
Invoice / receipt number: _________________________________________________________________________________
Installation Details
Electrical date of installation:____________________________________________________________________________
Electrician Installers Details:
Company / Installers Name: ______________________________________________
Licence Number: _______________________________________________________
Telephone Number: _____________________________________________________
Gas date of installation:__________________________________________________________________________________
Gas installers details:
Company / Installers Name: ______________________________________________
Licence Number: _______________________________________________________
Telephone Number: _____________________________________________________
Plumbing date of installation: ____________________________________________________________________________
Plumbers installers details:
Company / Installers Name: ______________________________________________
Licence Number: _______________________________________________________
Telephone Number: _____________________________________________________
Dear Customer,
Congratulations on the purchase of your new product from
Home Appliances Pty Ltd.
We recommend you please take some time to read the instruction manual
thoroughly to familiarise yourself with the functionality and operations to ensure
optimum performance of your new appliance.
After reading the manual, please store it in a safe and accessible location for
future reference.
Installation
The installation of your new appliance must be carried out by a qualified
installer / technician in accordance to local regulations.
The packaging of your appliance has been selected from environmentally
friendly materials and can usually be recycled. Please ensure these are disposed
of correctly.
Customer Care
Our Customer Care centre is available should you wish to learn more about your
appliance in relation to how to use it to its best potential, or tips on cleaning as
well as available accessories.
For further details please contact our Customer Care team on
1800 444 357 or email: customercare@hapl.com.au
Thank you
Regards,
Home Appliances
Please read this user manual first!
Dear Customer,
We hope that you get the best results from your product which has been
manufactured with high quality and state-of-the-art technology. Therefore,
please read this entire user manual and all other accompanying documents
carefully before using the product and keep it as a reference for future use. If
you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models.
Differences between models will be identified in the manual.
Explanation of symbols
Throughout this User Manual the following symbols are used:
C
A
B
Important information or
useful hints about usage.
Warning for hazardous
situations with regard to life
and property.
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by the
local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
CONTENTS
1 INSTRUCTIONS
FOR SAFETY AND
ENVIRONMENT
4
2 DISHWASHER
7
General safety ...........................................4
Intended use ..............................................4
Children’s safety ........................................5
Disposing of packaging material................5
Transportation of the product ....................5
Compliance with WEEE Directive and
Disposing of the Waste Product ................6
Compliance with RoHS Directive...............6
Package information ..................................6
Overview....................................................7
Fan drying system .....................................8
Technical specifications .............................8
3 INSTALLATION
9
4 PREPARATION
12
Appropriate installation location.................9
Connecting water supply ...........................9
Connection to the drain ...........................10
Adjusting the feet .....................................10
Aquasafe+ .............................................. 11
Electrical connection................................ 11
Initial use ................................................. 11
Tips for energy saving .............................12
Water softening system ...........................12
Adjusting the water softening system ......12
Adding salt ...............................................14
Detergent .................................................15
Adding detergent .....................................15
Combined tablet detergents ....................16
Rinse aid..................................................17
Silverware basket piece...........................20
Silverware basket ....................................20
Cutlery basket .........................................21
Cutlery basket .........................................21
Collapsible lower basket wires (6 pieces) 22
Collapsible lower basket wires (4 pieces) 23
Collapsible lower basket wires (2 pieces) 23
Collapsible lower basket tines .................24
Collapsible lower basket tines .................25
Lower basket bottle wire ..........................25
SoftTouch Accessory ...............................26
Lower Basket Glass Holder .....................26
Tray Wash Supports ................................26
Lower basket multipurpose / height
adjustable service rack ............................27
Upper basket height adjustable rack .......28
Upper basket drawer ...............................28
Upper basket glass support piece ...........28
Upper basket glass support piece ...........29
Collapsable upper basket wires...............29
Collapsible upper basket tines.................30
Collapsible upper basket tines.................30
Adjusting the height of the upper basket .31
Adjusting the height of loaded upper
basket ......................................................32
Height setting with empty basket .............33
Upper cutlery basket................................34
5 OPERATING THE
PRODUCT
35
6 MAINTENANCE AND
CLEANING
42
7 TROUBLESHOOTING
46
Keys.........................................................36
Function keys ..........................................36
Preparing the machine ............................36
Programme selection...............................36
Auxiliary functions....................................38
Scheduling the washing time ...................39
Starting the programme ...........................40
Cancelling the programme ......................40
Salt indicator ( ) ...................................40
Rinse Aid indicator ( ) ...........................41
End of programme ...................................41
Water cut-off warning...............................41
Overflowing warning ................................41
InnerClean ...............................................41
Cleaning the outer surface of the product42
Cleaning the interior of the machine ........42
Cleaning the filters ...................................42
Cleaning the hose filter ............................43
Cleaning the impellers .............................44
Lower impeller .........................................44
Upper impeller ........................................44
Ceiling Impeller ........................................45
1 INSTRUCTIONS FOR SAFETY AND ENVIRONMENT
This section contains safety
instructions that will help to
get protected from risk of
personal injury or property
damage. Failure to follow
these instructions shall void all
warranties.
•
•
General safety
•
•
•
•
•
•
Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts
to overheat. This will
cause problems with your
product.
Do not operate the product
if the power cable / plug
is damaged! Call the
Authorised Service Agent.
Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation
made by a qualified
electrician. Our company
shall not be liable for any
damages that will arise
when the product is used
without grounding in
accordance with the local
regulations.
The water supply and
draining hoses must be
securely fastened and
remain undamaged.
Unplug the product when
not in use.
Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
4 /50 EN
•
•
•
•
•
Never touch the plug with
wet hands! Never unplug
by pulling on the cable,
always pull out by grabbing
the plug.
The product must
be unplugged during
installation, maintenance,
cleaning and repairing
procedures.
Always have the
installation and repairing
procedures carried out by
the Authorised Service
Agent. Manufacturer
shall not be held liable for
damages that may arise
from procedures carried
out by unauthorised
persons.
Never use chemical
solvents in the product.
They bring forth the risk of
explosion.
When you pull the upper
and lower baskets out
completely, the door of
the product will bear all
the weight of the baskets.
Do not put other loads on
the door; otherwise, the
product may tilt.
Never leave the door of
the product open apart
from loading and unloading
procedures.
Do not to open the door
of the product when it is
running unless necessary.
Be careful for the rush of
hot vapour when you need
to open the door.
Intended use
•
This product has been
designed for domestic use.
Page 4 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
instructions for safety and environment
•
It must be used to do the
domestic type dishes only.
• This appliance is intended
to be used in household
and similar applications
such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments
• Only dishwasher safe
detergents, rinse aids and
additives must be used.
• The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
• The service life of your
product is 10 years. During
this period, original spare
parts will be available
to operate the product
properly.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical,sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
without supervision.
/
Children’s safety
•
•
•
Electrical products are
dangerous for the children.
Keep children away from
the product when it is in
use. Do not let them to
tamper with the product.
Do not forget to close the
door of the product when
leaving the room where it
is located.
Store all detergents and
additives in a safe place
away from the reach of the
children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured
from recyclable materials.
Dispose of them properly
and sort in accordance with
recycled waste instructions.
Do not dispose of them with
normal domestic waste.
Transportation of the
product
A
If you need to move
the product, do it in
upright position and
hold from the rear
side. Slanting the
product onto its front
side may cause the
electronic parts in it
get wet and damaged.
EN 5
5 / 50 Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
instructions for safety and environment
1. Unplug the product before
transporting it.
2. Remove water drainage
and water supply
connections.
3. Drain the remaining water
in the product completely.
Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies
with EU WEEE Directive
(2012/19/EU). This
product bears a
classification symbol for
waste electrical and electronic
equipment (WEEE).This
product has been
manufactured with high quality
parts and materials which can
be reused and are suitable for
recycling. Do not dispose of
the waste product with normal
domestic and other wastes at
the end of its service life. Take
it to the collection center for
the recycling of electrical and
electronic equipment. Please
consult your local authorities to
learn about these collection
centers.
Package information
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations. Do
not dispose of the packaging
materials together with the
domestic or other wastes.
Take them to the packaging
material collection points
designated by the local
authorities.
Compliance with RoHS
Directive
The product you have
purchased complies with EU
RoHS Directive (2011/65/EU).
It does not contain harmful and
prohibited materials specified
in the Directive.
6 /50 EN
Page 6 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
DISHWASHER
2
Overview
16
/
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Filters
5. Lower basket
6. Rating Label
7. Control panel
8. Door
9. Detergent dispenser
10. Cutlery basket
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket
14. Top Cover (depends on model)
15. Ceiling impeller
16. Fan drying system (depends on model)
EN 7
7 / 50 Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Dishwasher
Technical specifications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the
safety rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input
220-240 V, 50 Hz (see rating label)
Total power consumption
1800-2100 W (see rating label)
Heater power consumption
1800 W (see rating label)
Total current (depends on the model)
10 A (see rating label)
Drain pump power consumption
30 W (see rating label)
Water pressure
0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
C
C
C
Technical specifications may be changed without prior notice to improve
the quality of the product.
Figures in this manual are schematic and may not match the product
exactly.
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of
the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.
Fan drying system
(depends on model)
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan
operation.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can
be e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be
tested in your request e-mail along with your contact information. Code, stock and
serial numbers of the product may be found on the type label attached to the side
wall of the door.
8 /50 EN
Page 8 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
3 INSTALLATION
Refer to the nearest Authorised
Service Agent for installation of your
product. To make the product ready
for use, make sure that the electricity,
tap water supply and water drainage
systems are appropriate before calling
the Authorised Service Agent. If they
are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
Preparation of the location
and electrical, tap water and
waste water installations
at the place of installation
is under customer's
responsibility.
C
B
A
C
Installation and electrical
connections must be carried
out by the Authorised Service
Agent. Manufacturer shall
not be held responsible
for damages arising from
processes carried out by
unauthorised persons.
Prior to installation, visually
check if the product has any
defects on it. If so, do not
have it installed. Damaged
products cause risks for your
safety.
Make sure that the water
inlet and discharge hoses
are not folded, pinched or
crushed while pushing the
product into its place after
installation or cleaning
procedures.
When placing the product, pay attention
not to damage the floor, walls, piping,
etc. Do not hold the product from its
door or panel to move it.
/
Appropriate installation location
•
•
•
•
Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be
installed on a flat surface in order for
the door to be closed comfortably and
securely.
Do not install the product at places
where temperature may fall below
0ºC.
Place the product at least 1 cm away
from the edges of other furniture.
Place the product on a rigid floor.
Do not place it on a long pile rug or
similar surfaces.
B
•
•
Do not place the product on
the power cable.
Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
Install the product in a place close to
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
C
We recommend attaching
a filter on the house/
apartment supply water inlet
to protect the machine from
damages that may arise from
impurities (sand, dirt, rust,
etc.) coming from the urban
water supply system or from
your own water system as
well as to prevent complaints
such as yellowing or sludge
accumulation at the end of
washing.
EN 9
9 / 50 Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Installation
C
C
min
120
min
300
max 1000
than 4 meters causes dirty washing.
Attach the water discharge hose
to the drainpipe without bending it.
Tightly fix the water discharge hose to
the drainpipe in order to prevent any
dislocation of the water discharge hose
during operation of the product.
min 500
Permitted water temperature: up to
25°C
The dishwasher may not be connected
to open warm water devices or flowthrough water heaters.
•
Do not use old or used water inlet
hose on the new product. Use the
new water inlet hose supplied with
the product.
•
Connect the water inlet hose
directly to the water tap. Pressure
coming from the tap should be
minimum 0.3 and maximum 10
bars. If the water pressure exceeds
10 bars, a pressure relief valve
should be installed in between.
•
Open the taps completely after
making the connections to check
for water leaks.
Use a screw-on hose
connector to connect the
water inlet hose to a water
tap with a ¾ inch external
thread. If required, use a
filter insert to filter deposits
from the pipes.
Drainpipe must be connected
to the sewage system and it
should not be connected to
any surface water.
Adjusting the feet
A
For your safety, close the
water inlet tap completely
after the washing programme
is over.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm
from the floor. A discharge hose longer
10 /50 EN
If the door of the product cannot be
closed properly or if the product swings
when you push it slightly, then you need
to adjust the feet of the product. Adjust
the feet of the product as illustrated in
the installation manual supplied with the
product.
Diswashers door must be
aligned properly otherwise
hot steam can escape!
Danger of serious burns,
other injury or may damage
furniture.
A
Page 10 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Installation
Aquasafe+
•
(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system. If the
Aquasafe+ system is damaged, unplug
the product and call the Authorised
Service Agent.
As the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
A
•
•
The voltage and allowed fuse or
breaker protection are specified in
the “Technical specifications” section.
If the current value of the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician
install a 16 Amp fuse.
The specified voltage must be equal
to your mains voltage.
Do not make connections via
extension cables or multi-plugs.
Damaged power cables
must be replaced by the
Authorised Service Agent.
B
B
B
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the “Technical
specifications” table. Our company shall
not be liable for any damages that will
arise when the product is used without
grounding in accordance with the local
regulations.
•
Connection must comply with
national regulations.
•
Power cable plug must be within
easy reach after installation.
B
/
Unplug the product after the
washing programme is over.
If your dishwasher is
equipped with internal
illumination, lamp should
only be replaced by the
Authorised Service Agent
in case of failures that may
occur on the lamp.
If the product has a failure,
it should not be operated
unless it is repaired by the
Authorised Service Agent!
There is the risk of electric
shock!
Initial use
Before starting to use the product, make
sure that all preparations are made
in accordance with the instructions in
sections “Important safety instructions” and
“Installation”.
•
To prepare the product to do the
dishes, perform first operation in the
shortest programme with detergent
while the machine is empty. During
the initial use, fill the salt reservoir with
1 litre of water prior to filling it with salt.
There might be a small
amount of water left in the
product after factory quality
control tests. This has no
harm on the product.
A
EN11
11/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
4
PREPARATION
Tips for energy saving
Following information will help you use
the product in an ecological and energyefficient manner.
Wipe away any coarse food remnants
on the dishes before putting them in
the product. Operate the product after
filling it completely. When selecting
a programme, consider the table
of “Programme data and average
consumption values”.
Do not put more detergent than
suggested on the detergent package.
Adjusting the water softening
system
Cleaning, rinsing and drying
performance of your dishwasher will
increase when water softening system
is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the
product according to the steps given
below to determine hardness level of
your supply water.
Water softening system
C
Your dishwasher requires
soft water. If the hardness
of the water is above 6°dH,
the water must be softened
and descaled. Otherwise,
ions that create the hardness
will accumulate on the
surfaces of the dishes and
may adversely affect the
washing, shining and drying
performances of the product.
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This
system softens the supply water that
enters into the product to a level that
will allow washing the dishes with the
required quality.
12 /50
Page
12 EN
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Remove the test
strip from the
packet.
Turn on the tap and Hold the test strip in Remove the test
Wait for 1 minute.
let the water run for the water for about strip from the water
about a minute.
a second.
and shake it.
The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the
countdown (3,2,1) is displayed keep the keys pressed for a while.
2. Press P+/P key to activate the (r..) position.
3. Using Time Delay key, adjust water hardness level according to the hardness of
the supply water. See “Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water French Water
Hardness °dH Hardness °dF
0th Level
0-5
0-4
0-8
1st Level
6-9
5-7
9-13
2nd Level
10-15
8-12
14-22
3rd Level
16-19
13-15
23-27
4th Level
20-24
16-19
28-34
5th Level
25-62
20-50
35-90
Water Hardness Level Indicator
Press the Time Delay key to switch the water hardness level
to position 1. (r1)
Press the Time Delay key to switch the water hardness level
to position 2. (r2)
Press the Time Delay key to switch the water hardness level
to position 3. (r3)
Press the Time Delay key to switch the water hardness level
to position 4. (r4)
Press the Time Delay key to switch the water hardness level
to position 5. (r5)
In order to protect your glassware against glass corrosion in an optimal way, you
have to perform the same hardness settings, which you have made in the control
panel, with the regeneration setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the
regeneration adjustment switch to 3rd level.
Regeneration Adjustment Switch
/
0th Level
1st Level
2nd Level
3rd Level
4th Level
5th Level
1
1
2
3
4
5
EN 13
13/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
If the hardness level of the supply water
is above 90 °dF or if you are using well
water, then it is recommended to use
water purification devices and special
filters.
If the hardness level of the supply water
is below 13°dF, there is no need to
use salt in your dishwasher. If this is
the case, “No Salt Warning Indicator”
(if any) illuminates continuously on the
panel of your machine.
If the water hardness level adjustment
is set to level 1, the “No salt warning
indicator” will illuminate continuously
although it is not necessary to use salt.
If you use salt under this condition,
salt will not be consumed and the Salt
indicator will not illuminate.
If you move your house,
it is necessary to readjust
water hardness level of your
machine by considering the
information given above
according to the hardness
level of the supply water
in your new location. Your
machine will display the
most recently adjusted water
hardness level.
C
C
C
We recommend using
granular or powder softening
salts. Do not use salts that
are insoluble in water such
as table salt or common
salt. Performance of water
softening system may get
worse in time.
Salt reservoir will fill with
water when you start the
product. Therefore, add the
softening salt before starting
the machine.
1. First take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid counter
clockwise to open it (A, B).
Adding salt
Water softening system needs to be
regenerated in order that the product
operates with the same performance
continuously. Dishwasher salt is used
for this purpose.
Use only special softening
salts produced particularly
for the dishwashers in your
machine.
C
14 /50 EN
C
Salt reservoir will fill with
water when you start the
product. Therefore, add the
softening salt before starting
the machine.
Page 14 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
C
Before initial use, fill the
water softening system with
1 litre of water (C).
3. Fill the salt reservoir with salt by
using salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
C
You can put about 2 kg of
dishwasher salt into the salt
reservoir.
4. Replace the lid and tighten it
securely when the reservoir is full.
5. If you will not start a washing
programme immediately after
adding the salt, run the machine
empty in the shortest programme
to dissolve and wash away the
scattered salt in the machine.
/
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
Loose salt grains can cause
rust marks in your machine if
not rinsed away. Only fill salt
just before a programme is
run.
Detergent
You can use powder, liquid/gel and
tablet detergents in the machine.
Only use the detergents
produced particularly for use
with dishwashers. Never
use washing up liquids.
We recommend you not to
use detergents that contain
chlorine and phosphate
as they are harmful for the
environment.
C
Adding detergent
C
C
Refer to the “Programme
Table” to determine the
correct amount of detergent
for the selected programme.
In order to have good
washing and drying results,
always follow the instructions
on the detergent packaging.
If you have further questions,
we recommend to contact
with the producer of the
detergent.
EN15
15/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
A
Do not put solvents into the
detergent dispenser. There is
risk of explosion!
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
1. Push the latch to right to open the
detergent dispenser lid (A).
C
If dishes have been waiting
for a long time and have
dried residues, fill the 5 cm³
compartment too (2).
3. Close the detergent dispenser lid by
pressing on it lightly. A “click” will be
heard when the lid is closed.
C
In programmes with prewash
and high temperature,
in which you use tablet
detergents, make sure that
the detergent dispenser lid is
closed firmly.
C
Use powder detergent in
short programmes without
prewash since the solubility
of the tablet detergent
changes depending on the
temperature and time.
2. Put suggested amount of powder,
liquid/gel or tablet detergent in the
dispenser.
C
Inside the detergent
dispenser, there are level
markings that help you
use appropriate amount of
detergent. When brimful,
detergent dispenser will
contain 40 cm³ of detergent.
Fill detergent up to 15 cm³
or 25 cm³ level marks in
the detergent dispenser
according to fullness of
the machine and/or soiling
degree of the dishes (1).
A
Excessive usage of powder
detergents will cause the
detergent not dissolve
completely and will also
cause scratches on the
glassware.
Combined tablet detergents
Combined tablet detergents exhibit
water softening and / or rinse aid effect
in addition to detergent effect. Some
types of these detergents also contain
special-purpose washing chemicals
such as glass and stainless steel
protectors.
16 /50 EN
Page 16 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Combined tablet detergents are
available as 3in1, 5in1, Allin1 etc. They
function only up to a specific degree
of water hardness. Above this limit
regeneration salt and rinse aid must be
added. Refer to the instructions on the
packaging of the combined detergent
whether it is suitable for the hardness
level of the water supply.
While using combined tablet
detergents contact with the
detergent producers if the
dishes are wet and/or if
you notice limescale spots
particularly on glasses after
the washing programme is
over.
C
C
/
C
The rinse aid used in
dishwashers is a special
combination used to increase
drying efficiency and prevent
water or limescale stains on
the washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
1. Open the lid of the rinse aid
reservoir by pressing its latch (B).
The best washing
performance in dishwashers
is obtained by using
detergent, rinse aid and water
softening salt individually.
When you switch to powder, liquid/gel
or tablet detergent from a combined
tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level so
as to suit the water supply.
4. Make the appropriate rinse aid
settings.
C
Rinse aid
Depending on the model,
salt indicator and/or rinse aid
indicator must be enabled
again if they were disabled
before.
2. Fill the reservoir until “MAX” level.
3. Turn the rinse aid amount adjuster
manually to a position between
1 and 6 (4). If there are stains on
tableware items after washing, level
must be increased and if there is
a blue trace after wiping them by
hand, it must be decreased. This is
EN17
17/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
set to position 4 as factory default.
4. Close the lid of the reservoir by
pressing on it lightly.
C
Wipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.
Items not suitable for washing in the
dishwasher
•
Never wash dishes soiled by
cigarette ash, candle remnants,
polish, dyestuff, chemicals, etc. in
your dishwasher.
•
Do not wash iron alloy items in the
dishwasher. It can get corroded or
leave stains on other items.
•
Do not wash cutlery with wooden
or bone stems, glued pieces,
or pieces that are not resistant
to heat, as well as copper and
tin-plated containers in the
dishwasher.
Decorative prints of
chinaware as well as
aluminum and silver items
may get discoloured or
tarnished after washing in
the dishwasher just as it
happens in handwashing as
well. Some delicate glass
types and crystals may
become dull in time. We
strongly recommend you
to check if the tableware
you are going to purchase
is suitable for washing
especially in the dishwasher.
C
18 /50 EN
Placing the dishes into the
dishwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the
dishes in an orderly way.
•
Wipe away any coarse food
remnants (bones, seeds, etc.) on
the dishes before placing them in
the dishwasher.
•
Place thin, narrow pieces in the
middle sections of baskets if
possible.
•
There are two separate baskets in
which you can place your dishes in
the dishwasher. Place the heavily
soiled and bigger items in the lower
basket and smaller, delicate and
light items in the upper basket.
•
Place the hollowed dishes such as
bowls, glasses and pans upside
down in the dishwasher. Thus,
accumulation of water in deep
hollows is prevented.
To prevent possible injuries,
always place the sharp and
pointed dishes such as
service fork, bread knife,
etc. upside down so as their
pointed ends will face down
or they will lie horizontally in
the dish basket.
A
Unload dishes in the lower basket first
and then the dishes in the upper basket.
Page 18 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Suggestions for loading the dishwasher
Improper Loading Of Dishware
Lower basket
Upper basket
Improper Loading Of Dishware
/
EN 19
19/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
Silverware basket piece
(depends on model)
You can place your forks, spoons and
etc. to upper basket with the additional
piece in the figure..
20 /50 EN
Silverware basket
(depends on model)
Silverware basket is designed to wash
your dishes such as fork, spoon and
etc. in a cleaner manner.
Page 20 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Cutlery basket
(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in
an efficient manner.
Since the cutlery basket can be moved
(A, B), you can create more space while
placing your dishes in the lower basket
and free up space for your dishes of
different sizes.
/
Cutlery basket
(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in
an efficient manner.
Since the cutlery basket can be moved
(A, B), you can create more space while
placing your dishes in the lower basket
and free up space for your dishes of
different sizes..
EN21
21/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
Collapsible lower basket wires
(6 pieces)
(depends on model)
The foldable wires (A) located at
the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
You can create larger spaces by folding
each wire individually or all them at
once.
To bring the collapsible wires into
horizontal position, grab the wire from
mid position and push them in the
directions of arrows (B) To bring the
wires back to vertical position, just lift
them up. Collapsible wires will click into
the latch again.
Bringing the wires to
the horizontal position
byholding them from the
tips may cause them to
bend. Therefore, it will be
appropriate to bring the wires
in the middle to horizontal or
vertical position by holding
them from their stems and
pishing in the direction of
arrow.
3
4
5
6
C
22 /50 EN
Page 22 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Collapsible lower basket wires
(4 pieces)
(depends on model)
The four piece foldable wires located
at the lower basket of the machine
are designed for an easier placement
of large pieces such as pans, bowls,
etc. (1, 2, 3, 4). You can create larger
spaces by folding each wire individually
or all of them at once. Lay the foldable
wires down by pressing on the latch (A).
/
Collapsible lower basket wires
(2 pieces)
(depends on model)
The two piece foldable wires located
at the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
(1, 2).
You can create larger spaces by folding
each wire individually or all of them at
once. Lay the foldable wires down by
pressing on the latch (A).
EN23
23/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
Collapsible lower basket tines
(depends on model)
There are foldable tines (A) located at
the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
You can create larger spaces by folding
each tines individually or all of them at
once.
C
To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows (B). To bring the
tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again (C).
24 /50 EN
Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring
the tines in the middle to
horizontal or vertical position
by holding them from their
stems and pushing in the
direction of arrow.
Page 24 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Collapsible lower basket tines
(depends on model)
There are foldable tines (A) located at
the lower basket of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
You can create larger spaces by folding
each tines individually or all of them at
once.
C
Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring
the tines in the middle to
horizontal or vertical position
by holding them from their
stems and pushing in the
direction of arrow.
Lower basket bottle wire
(depends on model)
The bottle wire is designed for easier
washing of long pieces with wide
mouths. You may take out the bottle
wire from the basket when not in use by
pulling it out from both sides (H).
To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows (B). To bring the
tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again (C).
/
EN 25
25/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
SoftTouch Accessory
(depends on model)
The SoftTouch Accessory found in the
lower basket of your machine enables a
safe washing for your fragile glasses.
Tray Wash Supports
(depends on model)
Use the supports to wash trays in the
bottom basket.
See the Auxiliary functions section for
appropriate programme and function
selection.
Lower Basket Glass Holder
(depends on model)
Lower Basket Glass Holder found in the
lower basket of your machine enables a
safe washing for your oversized and tall
glasses.
26 /50 EN
Page 26 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Lower basket multipurpose /
height adjustable service rack
(depends on model)
This accessory located at the lower
basket of your machine allows you
to easily wash pieces such as extra
glasses, long ladles and bread knives.
A
Make sure that the impeller
does not touch the dishes
you placed on the racks.
To close the racks:
1. Fold the rack (A).
2. Slide the rack up (B).
3. Put the rack in vertical position (C).
4. Slide the rack down and lock it by
the tabs (D).
C
You may open the racks in
the same process in reverse
order.
To adjust the height of the racks:
1. Fold the rack (E).
2. Slide the rack up (F).
3. Open the rack at the desired level
(G).
C
/
You may use the racks as
required by moving them to
lower or upper position, or
close them to create a wider
space in your lower basket.
EN27
27/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
Upper basket height
adjustable rack
(depends on model)
Use the lower and upper parts of the
height adjustable racks in the upper
basket of the machine by sliding them
down or up according to the heights of
the glasses, cups or etc. (A, B, C).
Upper basket glass support
piece
(depends on the model)
When placing long stemmed glasses or
wine glasses, do not lean them against
other pieces but to the edge of the
basket or to the rack (1). Do not lean
long glasses against each other. They
can move and get damaged during
washing.
If you wish to place large-volume pieces
on the upper basket, release the tab of
the glass support piece from the upper
basket wire it is hooked to. Thus, you
can obtain a wider space.
Upper basket drawer
(depends on the model)
You can easily place additional desert
spoons, small forks and knives into the
basket drawer installed to the upper
basket of your machine.
28 /50 EN
Page 28 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Upper basket glass support
piece
(depends on the model)
When placing long stemmed glasses or
wine glasses, do not lean them against
other pieces but to the edge of the
basket or to the rack (1). Do not lean
long glasses against each other. They
can move and get damaged during
washing.
If you wish to place large-volume pieces
on the upper basket, release the tab of
the glass support piece from the upper
basket wire it is hooked to. Thus, you
can obtain a wider space.
/
Collapsable upper basket
wires
(depends on the model)
To bring the collapsable wires on the
upper basket of the machine into
horizontal position, press on the latch
(1). Place your larger dishes into the
area created (2). To bring the wires
back to vertical position, just lift them
up.
EN29
29/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
Collapsible upper basket tines
(depends on model)
There are foldable tines on the upper
basket of the machine that you can lay
down when you need larger space for
big dishes. On your upper basket there
are two types of laying tines namely,
fully laid system (A) and gradually laid
system (B). To bring the foldable tines
into horizontal position, push the tines
in the direction of the arrow by holding
from the middle. Place your larger
dishes into the area created. To bring
the tines back to vertical position, just lift
them up. Foldable tines will then snap in
the latch again.
C
30 /50 EN
Holding the tines from ends
to put them in lying position
may cause the tines to
bend. For this reason, it will
be appropriate to hold the
tines in the middle from their
bottoms and to push in the
direction of the arrow to lay
down or bring them to vertical
position.
Collapsible upper basket tines
(depends on model)
Upper basket of the machine is
equipped with tines with gradual folding
system (A) that you can lay down
when you need a larger space for large
dishes.
To bring the collapsible tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows. Place your larger
dishes into the area created. To bring
the tines back to vertical position, just lift
them up. Collapsible tines will click into
the latch again.
C
Bringing the tines to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, it
will be appropriate to bring
the tines in the middle to
horizontal or vertical position
by holding them from their
stems and pushing in the
direction of arrow.
Page 30 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Adjusting the height of the
upper basket
(depends on model)
Basket adjustment mechanism on the
loaded upper basket of the machine
is designed to allow you create taller
areas in the upper or lower section
of the machine based on your
requirements by adjusting the height
of the loaded basket in up or down
directions.
To raise the basket:
Grab one of the upper basket wires
(right or left) and lift it up (A).
Repeat the same process to raise the
other side of the basket.
Repeat the same process to lower the
other side of the basket.
Make sure that both sides of the loaded
basket height adjustment mechanism
are at the same level (down or up).
Make sure that both sides of the loaded
basket height adjustment mechanism
are at the same level (down or up).
To lower the basket:
Press the latch on the loaded basket
adjustment mechanism (right and left)
to lower the basket (B).
/
EN31
31/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
Adjusting the height of loaded
upper basket
(depends on model)
Basket adjustment mechanism on
the upper basket of the machine is
designed to allow you create wider
areas in the upper or lover section of the
machine based on your requirements
by adjusting the height of the loaded
basket in up or down directions without
removing it from the machine.
To raise the basket:
1. Grab one of the upper basket wires
(right or left) and lift it up (A).
2. Repeat the same process to raise
the other side of the basket.
3. Make sure that both sides of
the basket height adjustment
mechanism are at the same level
(down or up).
To lower the basket:
1. Press the latch on the basket
adjustment mechanism (right or left)
to lower the basket (B).
2. Repeat the same process to lower
the other side of the basket.
3. Make sure that both sides of
the basket height adjustment
mechanism are at the same level
(down or up).
32 /50 EN
Page 32 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Preparation
Height setting with empty
basket
(depends on model)
In this model, the height setting of the
upper basket may be changed using
the wheels which are mounted at two
different heights.
Release the latches on both the right
and left tracks of the upper basket by
pushing them outwards
Pull out the basket out completely.
Place the basket back into the tracks at
the desired height
Push the latches back into the correct
position.
/
EN33
33/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Preparation
Upper cutlery basket
(depends on model)
The upper cutlery basket is designed for
small dishes, or long items that cannot
fit into the lower cutlery basket.
After taking out the basket by lifting it
up, remove the carrier part from the rails
by pulling it towards yourself (C).
Thanks to the easy take-out-from-themachine feature, it allows taking out
the dishes from the machine together
with the basket after they are washed
(A). Since it can fit into all standard
size drawers, it does not require the
dishes to be removed from the basket
and placed into the kitchen drawers or
shelves.
Replace the rail lids and push them
back to seat them into their places. Turn
the rails inside the machine sideways to
seat them properly in their places (D).
If you don’t want to use the upper
cutlery basket, pull it back to yourself to
remove it from the machine, rotate the
rail lids towards outside and pull them
towards yourself to take them out (B).
34 /50 EN
In order to replace the upper cutlery
basket into its place again, repeat the
same process in reverse order.
Page 34 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
5 OPERATING THE PRODUCT
1
2
3
4
5
6
13 12
7
8
11
3
9
10
1. On/Off key
2. Programme Selection / Programme Cancel (3 seconds) key
3. Function keys
F1 Half Load function
F2 Extra Drying Function
F3 Fast+ Function
F4 TurboWash Function
4. Programme indicator
5. Salt indicator
6. Not in use
7. Start / Cancel indicator
8. Time Delay / Programme Time indicator
9. Time Delay key
10. Time Delay indicator
11. End of Programme indicator
12. Not in use
13. Rinse Aid indicator
/
EN35
35/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Operating the product
Keys
On/Off key
When you press On / Off key, indicator
lights illuminate on the display for ON
position. The lights turn off in OFF
position.
Programme Selection / Programme
Cancel key
Press this key until the desired
programme appears in the programme
indicator.
To cancel the running programme open
the door of the product. Press and hold
the Programme Selection / Programme
Cancel keys for 3 seconds. After the
3 - 2 - 1 countdown, 0:01 is displayed,
close the door of the product and wait
for the draining process complete.
Draining is completed in 2 minutes and
the machine gives an audible warning
when it is completed.
Programme selection
1. Press the On/Off button to turn on
your machine.
2. Check the Salt and Rinse Aid
indicators and add salt and/or rinse
aid if needed.
3. Refer to the table of “Programme
data and average consumption
values” to determine a washing
programme suitable for your dishes.
4. Selected programme will start when
you close the door of your machine.
Function keys
If you press any of the Function keys
during programme selection or time
delay selection, an affirmative key
signal will be heard provided that the
relevant function is supported by the
selected programme. Function will be
deemed selected when the indicator of
the selected function is lit.
To cancel the selected function, keep
the function key pressed until the
function indicator disappears.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with
the instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent
into the detergent dispenser.
36 /50 EN
Page 36 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
/
#
45 ºC
Eco *
3
+
30
10,2
0,80
-
-
15
4
-
Wash
Dry
Duration (min)
Water (I)
Energy (kWh)
0,89
11,2
142
+
+
+
Medium
70 ºC
Intensive
5
70 ºC
Hygiene
6
70 ºC
Mix+
7
40-65 ºC
Auto
8
1,30
10,2
58
+
+
-
Medium
1,43
16,2
153
+
+
+
High
1,68
17,6
127
+
+
+
High
1,36
18,6
183
+
+
+
High
0,90-1,45
10,2-14,4
110-210
+
+
+
Medium to high
Determines the
The best suitable
Suitable for the
Suitable for heavily
Daily washing
programme at which soiled dishes, pots dishes which require programme for the soiling degree of the
extra hygiene such mixed nature of the dishes and sets the
and pans.
the medium soiled
temperature and
daily dishes. Glass
as articles for
dishes that are kept
amount of the
and crystal utensils
babies. Also
waiting are cleaned
washing water as
are washed
suitable for heavily
in the fastest way.
well as the washing
sensitively in the
soiled dishes.
upper basket while time automatically.
the pots and pans Suitable for all types
of dishes.
are washed
powerfully in the
lower basket.
60 ºC
Quick
4
EN37
37/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Sensitivity: Public
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference
programme for testing institutes. The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and
using the test programme.
Low
-
Most economical
Suitable for lightly
soiled daily dishes washing programme
for the medium
that are scraped or
soiled daily dishes
pre-cleaned.
that are kept waiting.
35 ºC
Mini
2
+
Suitable for
removing the
remnants on the
soiled dishes that
will be kept waiting
in the machine for a
few days, and thus,
for preventing the
bad odour buildup.
-
Pre-wash
1
Prewash
Degree of Soiling
Cleaning temperature
Programme name
Programme number
Programme Table
Operating the product
Operating the product
Auxiliary functions
Washing programmes of your
dishwasher are designed to obtain the
best cleaning effect, considering the
type of the soiling, soiling degree and
properties of the dishes to be washed.
Auxiliary functions allow you save from
time, water and power.
Auxiliary functions may cause
changes in the programme
duration.
C
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is
not compatible with the
programme will not be active.
Half Load function
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off
key.
3. Select the desired programme and
press the Half Load key.
While the function is enabled, the Half
Load indicator will become on in the
function selection indicator and on the
display.
4. Close the door of the machine to
start the programme.
C
With the Half Load function
you can save both water and
power while using the lower
and upper baskets of the
machine.
Fast+ Function
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
Extra Drying Function
It provides superior drying performance.
Auto Tablet Feature
Auto Tablet is a feature which detects
the use of combined tablet detergents
automatically.
Drying performance of
these type of detergents
is improved by adjusting
temperature and duration
accordingly.
C
Owing to this feature, there is no need
to press any button in case of a tablet
detergent use.
Feature can be activated if automatic
detection is desired.
To activate / to deactivate:
1. After turning on the machine,
press Time Delay and P keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P key to activate the a:
option. Automatic detergent
detection feature is disabled at “a:0”
option and enabled at “a:1” option.
Set the desired option by pressing
the Time Delay key.
3. Turn off the machine with On/Off
key to save the changes.
TurboWash Function
This function operates the lower
impeller with a higher pressure and
higher speed to enable a better washing
for dishes such as pans and trays with
stubborn, dried soiling.
38 /50 EN
Page 38 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Operating the product
Interior Lighting
(Depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After turning on the machine,
press Time Delay and P+ keys
simultaneously. Continue to press
until the countdown 3, 2, 1 is
completed on the display.
2. Press P+ key to activate the L:
option. The interior lighting is turned
off at "L:0" option and turned on at
"L:1" option. Set the desired option
with the Time Delay key.
3. Turn off the machine with On/Off
key to save the changes.
Changing Warning Sound Volume
1. After switching your machine on,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to activate the S:
position on the display.
3. Each pressing on the Time Delay
key will change the warning sound
volume as "S:0" off, "S:1" medium
and "S:2" high.
4. Turn off the machine with the On/Off
key to save the changes.
3. Each pressing on the Selection
key will change the warning sound
volume as "S:0" off, "S:1" medium
and "S:2" high.
C
/
Your machine is set to
“S:2” as factory default.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light
turns off after the washing process is
complete.
Floor illumination is activated
automatically when the
washing programme starts
and remains lit until the end
of the programme.
C
C
Floor illumination cannot be
cancelled by the user.
Scheduling the washing time
Time Delay
If an economical electricity tariff is
applied in your region, you can use
the Time Delay function to wash your
dishes during appropriate hours.
You can delay the start of the selected
programme until 24 hours.
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will
start flashing.
3. Set the desired time by pressing the
Time Delay key. Time will increase
with increments of 30 minutes up
to 6 hours and after that in 1 hour
increments up to 24 hours every
time you press the key.
4. Close the door of your machine
after setting the Delayed Start.
Once the delay time is over, the
selected programme will start
automatically.
EN39
39/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Operating the product
Changing the settings while Time
Delay function is active
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay time.
Programme and auxiliary
functions cannot be set/
changed after the programme
has started.
C
To cancel the Time Delay function
Open the door of the product Press
and hold the Programme Selection /
Programme Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.
You can select and start a
new programme following the
cancellation of Time Delay
function.
C
C
Time Delay function cannot
be set after the programme
starts.
Starting the programme
Close the door of your machine to start
it after selecting the programme and
auxiliary functions.
Your machine performs water
softening depending on the
hardness level of the supply
water. Washing time can
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.
C
40 /50 EN
C
C
Pay attention not to open the
door of the machine when
it is running. There may
be a rush of vapour when
you open the door of your
machine; be careful.
The machine will remain
silent in pause mode for
some time in order to remove
the water from the machine
and on the dishes completely
and to have the water
softener cleaned, and then it
will resume running in drying
mode.
Cancelling the programme
Open the door of the product Press
and hold the Programme Selection /
Programme Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.
There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on
the step the programme you
have cancelled was in.
C
Salt indicator (
)
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt in
the dishwasher or not. You need to refill
the salt reservoir with salt whenever salt
indicator appears on the display of your
machine.
Adjusting the water hardness
level is explained in Water
Softening System section.
C
Page 40 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Operating the product
Rinse Aid indicator ( )
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears on
the display of your machine.
End of programme
C
When the programme you
have selected comes to an
end, an audible warning
signal will warn you to turn off
your machine. This audible
signal will warn you with
certain intervals before it
turns off.
End of Programme indicator will light up
when the washing programme is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the
socket.
C
C
/
For energy saving, the
machine is automatically
turned off following the
completion of the programme
or if the programme is not
started.
Leave your dishes in the
machine for about 15
minutes to allow them cool
down after they are washed.
Your dishes will dry in a
shorter time if you leave
the door of your machine
ajar during this period. This
process will increase the
drying effectiveness of your
machine.
Water cut-off warning
If mains water is cut or water inlet tap
is turned off the machine cannot take
water in and E:02 icon will flash on the
programme indicator. As long as the
problem continues, washing programme
is paused and the water inlet is checked
regularly by the machine; when
the water is restored E:02 icon will
disappear after a while and the washing
programme resumes.
Overflowing warning
If the machine intakes too much
water or there is leakage at any of the
components then the machine will
detect this and E:01 icon will flash on
the Programme indicator. As long as the
overflowing continues safety algorithm
will be active and try to discharge the
water. If overflowing stops and safety
is assured, E:01 icon will disappear.
If E:01 does not disappear, there is
a permanent fault. In this case the
authorised service should be contacted.
InnerClean
This programme is recommended
to be operated on each 1-2 months
for machine cleaning and necessary
hygiene. The programme should be
operated while the machine is empty.
In order to achieve an efficient result, it
is recommended to use together with
special machine cleaning agents.
Do not use this programme to
clean dishes. As it operates
in high temperatures, it is
harmful for the dishes.
C
EN 41
41/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
6
MAINTENANCE AND CLEANING
Service life of the product extends and
frequently faced problems decrease if it
is cleaned at regular intervals.
Unplug the product and turn
off the tap before attempting
any cleaning procedures.
A
C
C
Do not use abrasive
substances for cleaning.
Clean the filter and impellers
at least once a week in order
for the machine operates
efficiently.
Cleaning the filters
Clean the filters at least once a week
in order for the machine operates
efficiently. Check if food residues are left
on the filters. If there are food residues
on filters, take them out and clean well
under running water.
1. Turn the micro filter (1) and coarse
filter (2) assembly counter clockwise
and pull it out from its seating.
Cleaning the outer surface of
the product
Wipe the outer surface and door
gaskets of the product gently with a mild
cleaning material and damp cloth. Wipe
the "Control panel" only with a slightly
damp cloth.
Cleaning the interior of the
machine
•
•
Clean the interior of the machine
and the tank by running a
programme with or without
detergent based on the degree of
soil.
If water has remained in the
machine, drain the water by
performing the procedures under
the topic "Canceling a programme".
If the water cannot be discharged,
remove the filters as specified in
the "Cleaning the filters" section
and check if there are any leftover
deposits that have accumulated at
the bottom of the machine, blocking
the water path. Clean if necessary.
2. Pull out the metal/plastic filter (3)
from the seating.
3. Press the two pawls on the coarse
filter inwards and separate the
coarse filter from the assembly.
42 /50
Page
42 EN
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Maintenance and cleaning
Cleaning the hose filter
4. Clean all three filters under tap
water by means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the micro
filter. Make sure that it is properly
seated. Turn the coarse filter
clockwise until a "click" sound is
heard.
C
C
/
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of the
filter attached to the water inlet hose.
Check the filter and the hose regularly
and clean them if necessary.
1. Turn off the tap and remove the
hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its
seat in the hose.
4. Install the hose to tap.
(depends on model)
Do not use the dishwasher
without filter.
Incorrect placement of the
filters will reduce washing
efficiency.
EN 43
43/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Maintenance and cleaning
Cleaning the impellers
Clean the impellers at least once a
week in order for the machine operates
efficiently.
Lower impeller
Check if the holes on the lower impeller
(1) are clogged. If they are clogged,
remove and clean the impeller. You can
pull the lower impeller up to remove it.
44 /50 EN
Upper impeller
Check if the holes on the upper impeller
(1) are clogged. If they are clogged,
remove and clean the impeller. Turn its
nut to left to remove the upper impeller.
Make sure that the nut is tightened well
when installing the upper impeller.
Page 44 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Maintenance and cleaning
Ceiling Impeller
Check if the holes on the top ceiling
impeller (1) of your machine are
clogged. If they are clogged, remove
and clean.
To remove them, slightly push them
upwards and then rotate to left.
To install the impeller, seat it into its
slot, push slightly upwards and turn it
rightwards until it is securely tightened.
When the impeller is released, check if
it rotates without any obstruction.
/
EN45
45/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
7 TROUBLESHOOTING
Machine does not start.
• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door of
the machine.
• On / Off button is not pressed. >>> Make sure that you have turned on the
machine by pressing the On / Off button.
Dishes are not washed clean
• Dishes are not placed orderly in the machine. >>> Load the dishes as described
in the user manual.
• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
• Impellers are stuck. >>> Prior to starting the programme, turn the lower and
upper impellers by hand to make sure that they rotate freely.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be
clogged with food remnants such as lemon pips. Clean the impellers regularly
as illustrated in section “Cleaning and Care”.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
• Filters are installed incorrectly. >>> Check the filter system and make sure that
it is installed correctly.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
• Detergent is not sufficient. >>> If you are using powder detergent, adjust
the amount of detergent according to the soiling degree of your dishes and/
or programme definitions. We recommend you to use tablet detergents for
optimum results.
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid
in the machine.
• Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser
lid is closed tightly after adding detergent.
Dishes are not dry at the end of cycle
• Dishes are not placed orderly in the machine. >>> Place your dishes in a way
that no water will accumulate in them.
46 /50
Page
46 EN
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Troubleshooting
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in
the machine.
• Machine is unloaded right after the programme is over. >>> Do not unload your
machine right after washing process is completed. Slightly open the door and
wait for evacuation of the steam inside for a while. Unload the dishes after the
pieces cool down to a touchable level. Start unloading process from the lower
basket. Thus, dropping of water remained on a piece at upper basket onto the
pieces at lower basket is prevented.
• Selected programme is unsuitable. >>> Since rinsing temperature is low at
programmes with short duration, drying performance will also be low. Select
programmes with longer duration for a higher drying performance.
• Surface quality of the kitchen utensils is deteriorated. >>> Desired washing
performance can not be obtained on kitchen utensils with deteriorated surfaces
and it is not suitable to use such utensils in terms of hygiene as well. Also, water
can not flow easily on deteriorated surfaces. It is not recommended to wash such
kitchen utensils in dishwasher.
It is normal that drying complaints can be experienced with Teflon kitchen
utensils. It is associated with the structure of Teflon. Since the surface
tensions of Teflon and water are different, water droplets will remain as
beads on the Teflon surface.
Tea, cafe or lipstick stains remain on dishes.
• Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
• Surface quality of the kitchen utensils is deteriorated. >>> Tea and cafe stains or
other dye spots may not be cleaned in dishwasher when they have penetrated
in deteriorated surfaces. Desired washing performance can not be obtained
on kitchen utensils with deteriorated surfaces and it is not suitable to use such
utensils in terms of hygiene as well. It is not recommended to wash such kitchen
utensils in dishwasher.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
C
Lime traces remain on dishes and glassware gains a misty appearance
• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if
necessary. Increase the rinse aid setting if there is enough amount of rinse aid in
the machine.
• Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.
• Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Make sure that the salt reservoir lid is tightly closed after
/
EN 47
47/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Troubleshooting
finishing the filling process. Run the prewash programme to remove the salt that
spilled inside the machine. Since the salt granules that will remain under the lid
will dissolve during prewash, causing the lid loosen, check the lid once again at
the end of the programme.
There is a different odour in the machine
•
•
C
A new machine has a peculiar odour. It will fade out after a couple of
washes.
Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going
to start the machine right after you have put the dishes into it, remove the
remnants on the dishes and run the Prewash programme without detergent
every 2 days. In such cases, do not close the door of the machine completely
in order to avoid odour build up in machine. You can also use commercially
available odour removers or machine cleaners.
Rust, discoloration or surface deterioration occurs on dishes
• Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal
surfaces. Pay attention not to spill salt around the salt filling hole while adding
salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling
process. Run the prewash programme to remove the salt that spilled inside
the machine. Since the salt granules that will remain under the lid will dissolve
during prewash, causing the lid loosen, check the lid once again at the end of
the programme.
• Salty food remnants have remained on dishes for a long time. >>> If cutlery
soiled with such foods will be kept waiting in machine, dirt must be removed by
prewash or dishes must be washed without being kept waiting.
• Electric installation is not grounded. >>>Check if your machine is connected to
the actual grounding line. Otherwise, the static electric created in the product
causes arcs on the surfaces of metal items creating pores, removing the
protective cover on the surface and causing discoloration.
• Intensive cleansers such as bleaches are used. >>> Protective cover on metal
surfaces gets damaged and looses its efficiency in time when it gets in contact
with cleansers such as bleach. Do not wash your dishes with bleach.
• Metal items particularly such as knives are used for purposes other then their
intended uses. >>> Protective cover on the edges of knives may get damaged
when they are used for purposes such as opening cans. Do not use metal
kitchen utensils out of their intended uses.
• Cutlery are made of low quality stainless steel. >>> Corrosion on such items is
inevitable; they should not be washed in dishwashers.
• Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust
on a corroded item can migrate to other stainless steel surfaces and cause
corrosion on those surfaces as well. Such items should not be washed in
dishwashers.
48 /50 EN
Page 48 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
/
Troubleshooting
Detergent remains in detergent dispenser.
• Detergent dispenser was damp when adding detergent. >>> Make sure that the
detergent dispenser is dried well prior to filling it with detergent.
• Detergent is added long before the washing process. >>> Pay attention to add
detergent shortly before start-up of the washing.
• Opening of the detergent dispenser lid is prevented during washing. >>>
Place the dishes in a way that will not prevent the detergent dispenser lid from
opening and the water going into the machine from impellers.
• Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
• Impeller holes are clogged. >>> Lower and upper impeller holes might be
clogged with food remnants such as lemon pips. Clean the impellers regularly
as illustrated in section “Cleaning and Care”.
Decorations and ornaments on kitchen utensils are being erased.
Decorated glasses and decorated lustre porcelains are not suitable
for washing in the dishwasher. Manufacturers of some glassware and
porcelain tableware items do not recommend washing such kitchen
utensils in the dishwashers either.
Dishes are scratched.
C
•
•
•
/
C
Kitchen utensils that contains or are made of aluminum should not be
washed in dishwasher.
Salt leakage exists. >>> Pay attention not to spill salt around the salt filling hole
while adding salt. Spilled salt can cause scratches. Make sure that the salt
reservoir lid is tightly closed after finishing the filling process. Run the prewash
programme to remove the salt that spilled inside the machine. Since the salt
granules that will remain under the lid will dissolve during prewash, causing the
lid loosen, check the lid once again at the end of the programme.
Water hardness setting is low or salt level is insufficient >>> Measure the
hardness of the supply water appropriately and check the water hardness
setting.
Dishes are not placed orderly in the machine. >>> When placing the glasses
and other glassware into the basket lean them not against other dishes but the
edges or racks of the basket or the glass support tines. Striking of the glasses
to each other or to other dishes due to the impact of water during washing can
cause breaks, or scratches on their surfaces.
EN 49
49/50Page
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
Troubleshooting
A smear remains on glasses that resembles milk stain which can not be
removed when wiped by hand. A bluish / rainbow appearance occurs when
the glass is pointed to light.
• Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse
aid when adding rinse aid.
• Corrosion has occurred on glass due to soft water. >>> Measure the hardness
of the supply water appropriately and check the water hardness setting. If
your supply water is soft (<5 dH), do not use salt. Choose programmes that
wash in higher temperatures (e.g. 60-65°C). You can also use glass protective
detergents that are commercially available.
Foam forms in the machine.
• Dishes are washed with hand-wash detergent by hand but not rinsed before
placing them into the machine. >>> Hand-wash detergents do not contain
antifoam. There is no need to hand-wash the dishes before placing them into
the machine. Removing the coarse soil on the dishes under tap water, with a
tissue paper or fork will be sufficient.
• Rinse aid has spilled into the machine when adding rinse aid. >>> Take care
that rinse aid is not spilled in the machine when you are filling it. Clean any
spilled rinse ait with the help of a tissue paper/towel.
• Lid of the rinse aid reservoir is left open. >>> Make sure that the lid of the rinse
aid reservoir is closed after adding rinse aid.
Kitchen utensils are broken.
• Dishes are not placed orderly in the machine. >>> Load the dishes as described
in the user manual.
• Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
Water remains in the dishwasher at the end of the programme.
• Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
• Discharge hose is clogged/blocked. >>> Check the discharge hose. If
necessary, remove the discharge hose, clear the blockage and insert is as
illustrated in the user manual.
C
If you cannot eliminate the problem although you follow the instructions
in this section, consult your dealer or the Authorised Service Agent.
Never try to repair a nonfunctional product yourself.
For all product enquiries (including warranty support),
please contact our Customer Care team on
1800 444 357 or via email: customercare@hapl.com.au
15 9806 0100_AA_EUROMAID_E5_EN/ 13-11-17.(10:38)
50 /50 EN
/
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising