CyberData | 011049 | Owner Manual | Cyberdata 011049 SIP Call Button Owner manual

Cyberdata 011049 SIP Call Button Owner manual
Installation Quick Reference
Maximum Recommended Wall Cutout Dimensions
0.38 [9.5]
The IP Endpoint Company
ø0.19 [ø4.8]
(4 Places)
SIP Call Button
SIP Compliant
011049
2.39 [60.8]
3.40 [86.4]
0.50 [12.8]
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Addressa
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gatewaya
2.65 [67.3]
3.40 [86.4]
DIMENSIONS ARE IN INCHES [MILLIMETER]
10.0.0.1
a. Default if there is not a DHCP server present.
Typical System Installation
802.3af Compliant Ethernet Switch
SIP Call Button
IP Phone
IP PBX Server
Getting Started
•
Download the SIP Call Button Operations Guide PDF file, from the SIP Call Button product page at:
http://www.cyberdata.net/voip/011049/
•
Create a plan for the locations of your SIP Call Buttons.
•
WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes.
•
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
•
WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant.
•
WARNING: This enclosure is not rated for any AC voltages!
Contacting CyberData
Parts
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
http://www.cyberdata.net/
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Support Website: http://support.cyberdata.net/
RMA Department: (831) 373-2601 ext. 136
RMA Email: RMA@CyberData.net
RMA Status: http://support.cyberdata.net/
Warranty Information: http://support.cyberdata.net/
© 2018, CyberData Corporation, ALL RIGHTS RESERVED
930798H
(1) SIP Call Button Assembly
(1) Wall Mounting Kit
(4) #6 x 1.25 inches
Sheet Metal Screw
Quick Reference
Quick Reference
930798H
(1) Gang Box Mounting Kit
(4) #6 Ribbed Plastic
Anchor
(4) #6-32 x 0.625-inch
Flat-Head Machine Screw
© 2018, CyberData Corporation, ALL RIGHTS RESERVED
Wall Mounting Options
Dimensions
Pre Drill Holes
(4 Places) on Wall
Backplate
Cable
Slots
Closed
Pick One of Four Mounting Hole
for Ground Wire Connection
Wall
Cutout
4.528 [115.0]
Cable
Entry
Slot
Network Cable &
Ground Wire
(Not Provided)
Screw
Accessory Kit
4.528 [115.0]
DIMENSIONS ARE IN INCHES [MILLIMETER]
1.400 [35.6]
Terminal Block Connections
Mounting
Screw (3x)
Alternate Power Input:
1 = +8 to +12VDC @ 1000mA Regulated Power Supply*
2 = Power Ground*
Use a 3.17 mm (1/8-inch) flat blade
screwdriver for the terminal block screws
Gang Box Mounting Options
Wire (IN)
3
4
Relay Contact:
(1 A at 30 VDC for continuous loads)
3 = Relay Common
4 = Relay Normally Open Contact
5 = Sense Input
6 = Sense Ground
7 = Remote Switch "A"
8 = Remote Switch "B"
1
8
*Contacts 1 and 2 on the J3 terminal block are only for
powering the device from a non-PoE 12VDC power
source as an alternative to Network PoE power. Use of
these contacts for any other purpose will damage the
device and void the product warranty.
J3 Terminal Block
can accept 16 AWG wire
Cable
Slots
Closed
Backplate
Wall Cutout
Backplate accept
Single Gang Box
or Two Gang Box
Cable
Entry
Slots
RTFM Button
When the device is operational and linked to a
network, you can use the Reset Test Function
Management (RTFM) button to restore the
device to the factory default settings.
RTFM button
Network Cable & Ground Wire
(Not Provided)
To restore the device to factory default settings:
• Press and hold the RTFM button for seven
seconds, and then release the RTFM
button.
© 2018, CyberData Corporation, ALL RIGHTS RESERVED
Wall Cutout
930798H
Quick Reference
Mounting
Screw (3x)
Pick One of Two or Four
Available Mounting Hole
for Ground Wire Connection
121002B
Screw
Accessory Kit
Single Gang Box use two
Two Gang Box use Four
Quick Reference
930798H
© 2018, CyberData Corporation, ALL RIGHTS RESERVED
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising