CyberData | 011401 | Datasheet | Cyberdata 011401 SIP Ceiling Tile Drop-In Speaker Datasheet

Cyberdata 011401 SIP Ceiling Tile Drop-In Speaker Datasheet
SIP Ceiling Tile Drop-In Speaker
The IP Endpoint Company
The SIP Ceiling Tile Drop-In Speaker is a Power-over-Ethernet (PoE
802.3af/802.3at) and Voice-over-IP (VoIP) public address indoor
speaker that easily connects into existing local area networks with a
single CAT5/6 cable connection. The speaker is compatible with
most IP PBX servers. In a non-SIP environment, the speaker is
capable of playing audio from a multicast source.
CyberData has maintained one of the most comprehensive list
of IP PBX servers certified to work with CyberData VoIP products.
Features
 Autoprovisioning via HTTP, HTTPS, or TFTP
 HTTPS or HTTP web based configuration. HTTPS is
enabled by default.
 802.11q VLAN tagging
 Configurable event generation for device health and
status monitoring
 Loud ringer function - second SIP extension
 Paging prioritization and background music
 User upgradeable firmware via web interface or
autoprovisioning
 Network-adjustable speaker volume
 Support for 10 multicast paging groups
 Support for multiple SIP servers for redundancy
 Relay for activating door locks
Related Products:
011201 Ceiling Tile Auxiliary
Analog Drop-In Speaker
011288 Auxiliary
RGB Strobe Kit
Specifications
Ethernet I/F
10/100 Mbps
Protocol
SIP RFC 3261 Compatible
Power Input
PoE 802.3af/802.3at compliant or 24VDC
@ 1A Auxiliary Power Supply (not included)
Audio Output
802.3af - SPL 109.2 dB @ 1 meter
802.3at - SPL 111.9 dB @ 1 meter
On-Board Relay
1A @ 30 VDC
Payload Types
G.711 a-law, G.711 µ-law, and G.722
Operating Range
Temperature: -400 C to 550 C (-400 F to 1310 F)
Humidity: 5-95%, non-condensing
Storage Temperature
Storage Altitude
-400 C to 700 C (-400 F to 1580 F)
Up to 15,000 ft. (4573 m)
Dimensions (Unit)*
Length: 12 in. [304.8 mm]
Width: 3.23 in. [82.04 mm]
Height: 23.75 in. [603.25 mm]
Dimensions (Boxed)*
Length: 16.25 in. [412.75 mm]
Width: 8.125 in. [206.38 mm]
Height: 28.25 in. [717.55 mm]
Weight
Boxed Weight
8.2 lbs. [3.72 kg]
11.0 lbs. [4.99 kg]
Compliance
CE; EMC Directive – Class A EN 55032
& EN 55024, LV Safety Directive –
EN 60950-1, RoHS Compliant, FCC;
Part 15 Class A, Industry Canada;
ICES-3 Class A, IEEE 802.3 Compliant
Warranty
2 Years Limited
Part Number
011401
*Dimensions are measured from the perspective of the product
being upright with the front of the product facing you.
011146 SIP Paging Server
with Bell Scheduler
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
SIP Ceiling Tile Drop-In Speaker
Typical Installation
Generic PoE Switch
SIP Ceiling Tile Speakers
IP-PBX Server
IP Phone
SIP Ceiling Tile Speaker with Extra Speaker Connection
The SIP Ceiling Tile speakers support an amplified
audio output for a second analog speaker. Optimal
performance will be achieved using an 802.3at
power source.
Up to 20' Speaker Wire
SIP Ceiling Tile Speaker
Low Cost 8 Ohm
Analog Speaker
While the total Speaker wattage is the same, by
connecting a low cost analog speaker additional
coverage can be realized.
011201, Ceiling Tile Auxiliary Analog Drop-In Speaker
Typical Installation
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
930261G
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising