CyberData | 011288 | Owner Manual | Cyberdata 011288 Auxiliary RGB (Multi-Color) Strobe Kit Owner manual

Cyberdata 011288 Auxiliary RGB (Multi-Color) Strobe Kit Owner manual
Intercom Connections
Installation Quick Reference
The IP Endpoint Company
Auxiliary RGB Strobe Kit
011288
Parts List
•
(1) Auxiliary RGB Strobe Kit
•
(1) 3.28 feet [1 meter] cable
•
Meets ADA requirements for telephony signaling and notification
•
Activates from a CyberData IP endpoint
•
Mailbox Message Waiting Indication
•
Multicast activation
•
Download the Operations Guide PDF file, from the Downloads tab at:
Backplate
Features
to
J1
to
JX
Getting Started
JX
http://www.cyberdata.net/voip/011288/
Paging Amplifier Connections
Intercom Board
Slide Cable Grommet
into Cover Plate Slot
Backplate
Remove Hole Plug
and Grommet
J1
to
STROBE
Cover
Plate
RGB Strobe Assembly
Network Cable*
to Network Port
Slot
to
J1
Paging Amplifier Assembly
STROBE
MIC IN
J1
*Network Cable is Not Provided.
Slot
RGB Strobe Assembly
Contacting CyberData
Corporate Headquarters
CyberData Corporation
3 Justin Court
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
http://www.cyberdata.net/
© 2017, CyberData Corporation, ALL RIGHTS RESERVED
930831C
Quick Reference
Quick Reference
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Support Website: http://support.cyberdata.net/
RMA Department: (831) 373-2601 ext. 136
RMA Email: RMA@CyberData.net
RMA Status: http://support.cyberdata.net/
Warranty Information: http://support.cyberdata.net/
930831C
© 2017, CyberData Corporation, ALL RIGHTS RESERVED
Mounting Option
Speaker Connections
Auxiliary Strobe Cable to SIP Speaker Installation:
1. Connect the one meter strobe cable to the adapter cable.
2. Remove the mounting screws and port cover from the SIP Speaker.
3. Align the key bump on the adapter cable to the key bump slot on the SIP Speaker.
4. Replace the port cover and mounting screw as shown.
071069*
One (1) Meter
Strobe Cable
Connect Through Backplate / Slot
Pre-Drill Holes
& Wall Cutout
Screw Accessory Kit
Self-Tapping Screws & Anchors
Backplate
Mounting Screw
Mounting Screw
Backplate
Adapter
Cable
Port Cover
Flip Over
Port Cover
Strobe Cable
from Paging Amplifier
to J1
Slot
Dimple
Key Bump
Dimple
to
J1
Key Bump
Slot
J1
= Cable Slot Open
= Cable Slot Close
RGB Strobe Assembly
Mounting Screw (3x)
Ceiling Speaker Assembly
Mounting Screw
Faceplate
Assembly
Slot
Mounting Option
Strobe Cable Connection
Screw Accessory Kit
Self-Tapping Screws & Anchors
Pre-Drill Holes
for Anchors
Strobe Cable
from Paging Amplifier
Backplate
Slot
to J1
= Cable Slot Open
= Cable Slot Close
Mounting Screw (3x)
Faceplate
Assembly
© 2017, CyberData Corporation, ALL RIGHTS RESERVED
930831C
Quick Reference
Quick Reference
930831C
© 2017, CyberData Corporation, ALL RIGHTS RESERVED
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising