CyberData | 011154 | Datasheet | Cyberdata 011154/011153 Wall Mount Clock Kit Datasheet

Cyberdata 011154/011153 Wall Mount Clock Kit Datasheet
VoIP Clock Kit
The IP Endpoint Company
The Clock Kit enables the CyberData SIP Speaker to be upgraded
to a highly visible public address device with a time display.
The large display characters are easily read and adjust for ambient
light conditions. Time sync is performed by NTP and a built-in
real-time clock.
Power is supplied by the CyberData SIP Speaker from a single PoE
connection.
Features:

Easy wall or ceiling installation

Mounting kit included
Ordering Information

Electrogalvinized steel construction
The VoIP Clock Kit can be purchased as the Clock

RoHS compliant
Kit Wall Mount Adapter (#011153). The CyberData

Keyhold for easy installation
SIP Speaker must be purchased separately.

Top and bottom cable channels

2.3-inch sized digits
Specifications

12 or 24 hour format
Part Number

NTP time source
*011153, Wall Mount, Standard Color, RAL 9002, Gray White

Battery backed up real-time clock

Auto ambient light adjustment
*011154, Wall Mount, Optional Color, RAL 9003, Signal White
5.8 lbs.
*These numbers replace the 011023 (Wall Mount Adapter) numbers.

Two years warranty
Boxed Weight
Typical Installation
Generic PoE Switch
IP Phone
Clock Kit Wall Mount Adapters
IP-PBX Server
The IP Endpoint Company
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
5.8 lbs.
VoIP Clock Kit
Exploded View
Step 2
Hang Clock Kit Backplate to Wall
Secure it with Mounting Screws
P/N: 121001
Prepare Hole for Cable Access and
Drill Holes for Plastic Ribbed Anchors
Step 1
Step 6
Align Enclosure with Backplate
Secure it with Mounting Screws on Both Sides
Grounding
Lug
Ground Cable
Cable Entry
Nut
Step 3
Run Network Cable Through Wall & Backplate
or Through Cable Entry on Top
Step 4
Align Speaker Assembly with
Clock Kit Enclosure
Secure it with Non-Drive Button Head
Screws and Nuts
P/N: 121009 [RAL 9002]
P/N: 121010 [RAL 9003]
Step 5
Connect Network Cable to Speaker
Connect Clock (Ribbon Cable) to Speaker
Dimensions
8°
15.8 [402]
4.0 [102]
10.4 [264]
Dimensions are in Inches [Millimeter]
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
930262I
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising