CyberData | 011187 | Datasheet | Cyberdata 011187 2-Port PoE Gigabit Switch Datasheet

Cyberdata 011187 2-Port PoE Gigabit Switch Datasheet
2-Port PoE Gigabit Switch
The IP Endpoint Company
The CyberData 2-Port PoE Gigabit switch is
designed to expand a single PoE network connection
into one or two PoE network ports.
Pass through PoE power
The CyberData 2-Port PoE Gigabit switch is powered
from a single 802.3at or 802.3af network switch and
passes that power through to one or two of the
downstream switch ports.
In the basic configuration, one of the Gigabit downstream ports can drive a VoIP phone directly with
PoE and the other Gigabit port can be connected
to a user’s PC.
Specifications
No external power supplies would be required.
Ports
1 PD input port 802.3af or 802.3at
2 PSE port 802.3at (limited PD input)
Features
Dimensions
5.31” L x 3.03” W x 1.06” H
Warranty
2 years
Unit Weight
0.56 lbs.





2-port auto-negotiating (no crossover cable
required)
10.100.1000 full duplex (PoE-powered)
Link/Status and connection speed LEDs
RoHS compliant
VLAN Packet Forwarding
Power Distribution



All The PD input can be up to 30W.
 802.3af source @ 15W
 A 802.3at source @ 25W
 A non-compliant PoE injector up to 30W
The internal circuits on the splitter takes 2W to
operate.
 With an 802.3af input, 13W are
available to share between the two PSE outputs.
 With an 802.3at input, 23W are available
to share between the two PSE outputs.
 With a non-compliant 30W PoE injector,
28W are available to share between the
two PSE outputs.
Either one or both of the PSE outputs can provide
PoE power as long as the overall PSE output
wattage is 2W less than the PD input.
CyberData Corporation

3 Justin Court, Monterey, CA 93940
Standards
IEEE
Modes
10BASE-T, 100BASE-TX, and 1000BASE-T
Input Power
Supplied by either 802.3at or 802.3af
LEDs
Link/Status and Connection Speed
Operating temp.
-10o C to 50o C (14o F to 122o F)
Technical Details






All ports are 10/100/1000Mbps (10BASE-T,
100BASE-TX, 1000BASE-T) auto sensing
based upon the port's individual connection
Each port has auto MDX - any port can be
used as the uplink connection
Fully compliant to IEEE 802.3x standard
Automatic address learning, address aging
and address migration
Integrated lookup engine with 4k unicast
MAC addresses
831.373.2601

Fax: 831.373.4193

www.cyberdata.net
2-Port PoE Gigabit Switch
Typical Installation
PoE Power for Phone
Non-PoE
802.3af or
802.3at
Mounting
Mounting Option:
Mounting Option:
1. Mounting
Screw
1. Mounting
Screw
• Use
a size
Pre-drill
two 1/8"
holes6 to 8 pan
Use supplied screws
head screw.
2. Adhesive
off the adhesive backing and
attach the unit to a suitable surface.
2. Adhesive
• Peel
No Power Supply Required
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
930461J
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising